! Started logfile: /vlbi/uf001/uva//J1856-2236_S_dfm.log on Mon Jan 14 04:52:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1856-2236_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1856-2236_S_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.898851 visibilities/baseline/integration-bin.
! Found source: J1856-2236
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7038 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1856-2236_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008193Jy  sigma=16.328405
! Fit after  self-cal, rms=0.929380Jy  sigma=14.895804
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.308 mas, bmaj=6.577 mas, bpa=-4.161 degrees
! Estimated noise=0.857771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0509381 Jy
! Component: 100  -  total flux cleaned = 0.0726534 Jy
! Total flux subtracted in 100 components = 0.0726534 Jy
! Clean residual min=-0.008497 max=0.018140 Jy/beam
! Clean residual mean=-0.000085 rms=0.002718 Jy/beam
! Combined flux in latest and established models = 0.0726534 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0726534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103471Jy  sigma=1.516609
! Fit after  self-cal, rms=0.102373Jy  sigma=1.499347
! Inverting map 
! Added new window around map position (4.5, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206651 Jy
! Component: 100  -  total flux cleaned = 0.033688 Jy
! Total flux subtracted in 100 components = 0.033688 Jy
! Clean residual min=-0.006623 max=0.012497 Jy/beam
! Clean residual mean=-0.000059 rms=0.001974 Jy/beam
! Combined flux in latest and established models = 0.106341 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.106341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096369Jy  sigma=1.369757
! Fit after  self-cal, rms=0.095178Jy  sigma=1.352755
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140678 Jy
! Component: 100  -  total flux cleaned = 0.0229288 Jy
! Total flux subtracted in 100 components = 0.0229288 Jy
! Clean residual min=-0.005060 max=0.008189 Jy/beam
! Clean residual mean=-0.000040 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.12927 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 0.12927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092385Jy  sigma=1.286971
! Fit after  self-cal, rms=0.092004Jy  sigma=1.279795
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.908 mas, bmaj=7.696 mas, bpa=-3.353 degrees
! Estimated noise=0.549673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123634 Jy
! Component: 100  -  total flux cleaned = 0.0195213 Jy
! Component: 150  -  total flux cleaned = 0.0241819 Jy
! Component: 200  -  total flux cleaned = 0.0273252 Jy
! Total flux subtracted in 200 components = 0.0273252 Jy
! Clean residual min=-0.003662 max=0.005499 Jy/beam
! Clean residual mean=-0.000034 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 0.156595 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 84 components and 0.156595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090688Jy  sigma=1.239291
! Fit after  self-cal, rms=0.090526Jy  sigma=1.236714
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.908 x 7.696 at -3.353 degrees (North through East)
! Clean map  min=-0.0035604  max=0.06423 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.92     HN        1.15     KP        0.95     
!   LA        0.95     MK        1.00     NL        1.12     OV        0.97     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.78     FD        0.90     HN        1.13     KP        0.98     
!   LA        0.94     MK        1.10     NL        1.05     OV        0.94     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.93     HN        1.04     KP        1.00     
!   LA        1.00     MK        0.98     NL        0.95     OV        0.95     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.090526Jy  sigma=1.236714
! Fit after  self-cal, rms=0.109278Jy  sigma=1.221018
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.756 mas, bpa=-2.986 degrees
! Estimated noise=0.553134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (57.5, -92.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311406 Jy
! Component: 100  -  total flux cleaned = 0.00372947 Jy
! Component: 150  -  total flux cleaned = 0.0037307 Jy
! Component: 200  -  total flux cleaned = 0.00361222 Jy
! Total flux subtracted in 200 components = 0.00361222 Jy
! Clean residual min=-0.002736 max=0.002991 Jy/beam
! Clean residual mean=0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.160208 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.160208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109118Jy  sigma=1.217823
! Fit after  self-cal, rms=0.109336Jy  sigma=1.216042
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109336Jy  sigma=1.216042
! Fit after  self-cal, rms=0.107764Jy  sigma=1.213361
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.918 mas, bmaj=7.786 mas, bpa=-3.226 degrees
! Estimated noise=0.54835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000486656 Jy
! Component: 100  -  total flux cleaned = 0.000618869 Jy
! Component: 150  -  total flux cleaned = 0.000505716 Jy
! Component: 200  -  total flux cleaned = 0.000408021 Jy
! Total flux subtracted in 200 components = 0.000408021 Jy
! Clean residual min=-0.002534 max=0.002466 Jy/beam
! Clean residual mean=-0.000003 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.160616 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.160616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107691Jy  sigma=1.211933
! Fit after  self-cal, rms=0.107695Jy  sigma=1.211638
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245696 Jy
! Component: 100  -  total flux cleaned = 0.000148267 Jy
! Component: 150  -  total flux cleaned = 0.000106511 Jy
! Component: 200  -  total flux cleaned = 6.89641e-05 Jy
! Total flux subtracted in 200 components = 6.89641e-05 Jy
! Clean residual min=-0.002464 max=0.002251 Jy/beam
! Clean residual mean=-0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.160685 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 0.160685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107657Jy  sigma=1.210899
! Fit after  self-cal, rms=0.107649Jy  sigma=1.210818
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107649Jy  sigma=1.210818
! Fit after  self-cal, rms=0.107642Jy  sigma=1.210689
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.918 mas, bmaj=7.807 mas, bpa=-3.469 degrees
! Estimated noise=0.546522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.82435e-05 Jy
! Component: 100  -  total flux cleaned = 2.46502e-05 Jy
! Component: 150  -  total flux cleaned = 5.94672e-05 Jy
! Component: 200  -  total flux cleaned = 5.93967e-05 Jy
! Total flux subtracted in 200 components = 5.93967e-05 Jy
! Clean residual min=-0.002361 max=0.002077 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.160744 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.160744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107616Jy  sigma=1.210201
! Fit after  self-cal, rms=0.107615Jy  sigma=1.210141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.2743e-06 Jy
! Component: 100  -  total flux cleaned = 3.66577e-05 Jy
! Component: 150  -  total flux cleaned = 3.68743e-05 Jy
! Component: 200  -  total flux cleaned = 6.44342e-05 Jy
! Total flux subtracted in 200 components = 6.44342e-05 Jy
! Clean residual min=-0.002334 max=0.002062 Jy/beam
! Clean residual mean=-0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.160808 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.160808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107597Jy  sigma=1.209817
! Fit after  self-cal, rms=0.107594Jy  sigma=1.209795
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107594Jy  sigma=1.209795
! Fit after  self-cal, rms=0.107665Jy  sigma=1.209762
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.282 mas, bmaj=17.58 mas, bpa=0.9033 degrees
! Estimated noise=0.71757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372836 Jy
! Component: 100  -  total flux cleaned = 0.000422297 Jy
! Component: 150  -  total flux cleaned = 0.000445248 Jy
! Component: 200  -  total flux cleaned = 0.000445344 Jy
! Total flux subtracted in 200 components = 0.000445344 Jy
! Clean residual min=-0.002675 max=0.002559 Jy/beam
! Clean residual mean=-0.000000 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.161254 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 133 components and 0.161254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107667Jy  sigma=1.209725
! Fit after  self-cal, rms=0.107663Jy  sigma=1.209678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.09402e-05 Jy
! Component: 100  -  total flux cleaned = -6.27076e-05 Jy
! Component: 150  -  total flux cleaned = -4.58505e-05 Jy
! Component: 200  -  total flux cleaned = -4.53664e-05 Jy
! Total flux subtracted in 200 components = -4.53664e-05 Jy
! Clean residual min=-0.002679 max=0.002517 Jy/beam
! Clean residual mean=0.000000 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.161208 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 137 components and 0.161208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107665Jy  sigma=1.209741
! Fit after  self-cal, rms=0.107662Jy  sigma=1.209722
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=7.825 mas, bpa=-3.649 degrees
! Estimated noise=0.546019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.919 x 7.825 at -3.649 degrees (North through East)
! Clean map  min=-0.0032631  max=0.061389 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.307 mas, bmaj=6.685 mas, bpa=-4.413 degrees
! Estimated noise=0.848853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0539129 Jy
! Component: 100  -  total flux cleaned = 0.0827461 Jy
! Component: 150  -  total flux cleaned = 0.102042 Jy
! Component: 200  -  total flux cleaned = 0.11591 Jy
! Total flux subtracted in 200 components = 0.11591 Jy
! Clean residual min=-0.005074 max=0.007853 Jy/beam
! Clean residual mean=-0.000036 rms=0.001490 Jy/beam
! Combined flux in latest and established models = 0.11591 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.11591 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=7.825 mas, bpa=-3.649 degrees
! Estimated noise=0.546019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156818 Jy
! Component: 100  -  total flux cleaned = 0.025407 Jy
! Component: 150  -  total flux cleaned = 0.0317593 Jy
! Component: 200  -  total flux cleaned = 0.0362255 Jy
! Total flux subtracted in 200 components = 0.0362255 Jy
! Clean residual min=-0.003101 max=0.003865 Jy/beam
! Clean residual mean=-0.000016 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.152135 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 67 components and 0.152135 Jy
! Inverting map 
! Added new window around map position (-4, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372408 Jy
! Component: 100  -  total flux cleaned = 0.00550655 Jy
! Component: 150  -  total flux cleaned = 0.00651732 Jy
! Component: 200  -  total flux cleaned = 0.00714807 Jy
! Total flux subtracted in 200 components = 0.00714807 Jy
! Clean residual min=-0.002693 max=0.002115 Jy/beam
! Clean residual mean=-0.000004 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.159284 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 94 components and 0.159284 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.282 mas, bmaj=17.58 mas, bpa=0.9033 degrees
! Estimated noise=0.71757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197602 Jy
! Component: 100  -  total flux cleaned = 0.00244664 Jy
! Component: 150  -  total flux cleaned = 0.00258835 Jy
! Component: 200  -  total flux cleaned = 0.0025887 Jy
! Total flux subtracted in 200 components = 0.0025887 Jy
! Clean residual min=-0.002733 max=0.002353 Jy/beam
! Clean residual mean=0.000001 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.161872 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.99807e-05 Jy
! Component: 100  -  total flux cleaned = -1.08987e-06 Jy
! Component: 150  -  total flux cleaned = -1.69104e-06 Jy
! Component: 200  -  total flux cleaned = -1.80629e-06 Jy
! Total flux subtracted in 200 components = -1.80629e-06 Jy
! Clean residual min=-0.002693 max=0.002359 Jy/beam
! Clean residual mean=0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.16187 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 132 components and 0.16187 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=7.825 mas, bpa=-3.649 degrees
! Estimated noise=0.546019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.48063e-05 Jy
! Component: 100  -  total flux cleaned = -0.00021648 Jy
! Component: 150  -  total flux cleaned = -0.000337041 Jy
! Component: 200  -  total flux cleaned = -0.000410977 Jy
! Total flux subtracted in 200 components = -0.000410977 Jy
! Clean residual min=-0.002414 max=0.002062 Jy/beam
! Clean residual mean=-0.000000 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.16146 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 153 components and 0.16146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107631Jy  sigma=1.209226
! Fit after  self-cal, rms=0.107598Jy  sigma=1.208898
wmodel J1856-2236_S_map.mod
! Writing 153 model components to file: J1856-2236_S_map.mod
wobs   J1856-2236_S_uvs.fits
! Writing UV FITS file: J1856-2236_S_uvs.fits
wwins  J1856-2236_S_map.win
! wwins: Wrote 4 windows to J1856-2236_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000338648 Jy
! Component: 100  -  total flux cleaned = -0.000413904 Jy
! Component: 150  -  total flux cleaned = -0.000520211 Jy
! Component: 200  -  total flux cleaned = -0.000656535 Jy
! Component: 250  -  total flux cleaned = -0.000851746 Jy
! Component: 300  -  total flux cleaned = -0.00100924 Jy
! Component: 350  -  total flux cleaned = -0.00104035 Jy
! Component: 400  -  total flux cleaned = -0.00112959 Jy
! Component: 450  -  total flux cleaned = -0.00121679 Jy
! Component: 500  -  total flux cleaned = -0.00130218 Jy
! Component: 550  -  total flux cleaned = -0.00138625 Jy
! Component: 600  -  total flux cleaned = -0.00146864 Jy
! Component: 650  -  total flux cleaned = -0.00154969 Jy
! Component: 700  -  total flux cleaned = -0.00170816 Jy
! Component: 750  -  total flux cleaned = -0.00175961 Jy
! Component: 800  -  total flux cleaned = -0.00181081 Jy
! Component: 850  -  total flux cleaned = -0.00186195 Jy
! Component: 900  -  total flux cleaned = -0.00193722 Jy
! Component: 950  -  total flux cleaned = -0.0020355 Jy
! Component: 1000  -  total flux cleaned = -0.00213212 Jy
! Component: 1050  -  total flux cleaned = -0.00220354 Jy
! Component: 1100  -  total flux cleaned = -0.0022739 Jy
! Component: 1150  -  total flux cleaned = -0.0023662 Jy
! Component: 1200  -  total flux cleaned = -0.00245674 Jy
! Component: 1250  -  total flux cleaned = -0.00250137 Jy
! Component: 1300  -  total flux cleaned = -0.0025235 Jy
! Component: 1350  -  total flux cleaned = -0.00258913 Jy
! Component: 1400  -  total flux cleaned = -0.002654 Jy
! Component: 1450  -  total flux cleaned = -0.00271772 Jy
! Component: 1500  -  total flux cleaned = -0.00280172 Jy
! Component: 1550  -  total flux cleaned = -0.00284279 Jy
! Component: 1600  -  total flux cleaned = -0.00288374 Jy
! Component: 1650  -  total flux cleaned = -0.00296449 Jy
! Component: 1700  -  total flux cleaned = -0.00304423 Jy
! Component: 1750  -  total flux cleaned = -0.00304427 Jy
! Component: 1800  -  total flux cleaned = -0.00310327 Jy
! Component: 1850  -  total flux cleaned = -0.00319957 Jy
! Component: 1900  -  total flux cleaned = -0.0032188 Jy
! Component: 1950  -  total flux cleaned = -0.00335138 Jy
! Component: 2000  -  total flux cleaned = -0.00336997 Jy
! Component: 2050  -  total flux cleaned = -0.00337061 Jy
! Component: 2100  -  total flux cleaned = -0.00342575 Jy
! Component: 2150  -  total flux cleaned = -0.00348021 Jy
! Component: 2200  -  total flux cleaned = -0.00349829 Jy
! Component: 2250  -  total flux cleaned = -0.00358704 Jy
! Component: 2300  -  total flux cleaned = -0.00365713 Jy
! Component: 2350  -  total flux cleaned = -0.00365726 Jy
! Component: 2400  -  total flux cleaned = -0.00367455 Jy
! Component: 2450  -  total flux cleaned = -0.00372598 Jy
! Component: 2500  -  total flux cleaned = -0.00374306 Jy
! Component: 2550  -  total flux cleaned = -0.00379336 Jy
! Component: 2600  -  total flux cleaned = -0.00372622 Jy
! Component: 2650  -  total flux cleaned = -0.00377617 Jy
! Component: 2700  -  total flux cleaned = -0.00380911 Jy
! Component: 2750  -  total flux cleaned = -0.00380927 Jy
! Component: 2800  -  total flux cleaned = -0.00389044 Jy
! Component: 2850  -  total flux cleaned = -0.00393844 Jy
! Component: 2900  -  total flux cleaned = -0.00395419 Jy
! Component: 2950  -  total flux cleaned = -0.00393818 Jy
! Component: 3000  -  total flux cleaned = -0.00395394 Jy
! Component: 3050  -  total flux cleaned = -0.00395379 Jy
! Component: 3100  -  total flux cleaned = -0.00395386 Jy
! Component: 3150  -  total flux cleaned = -0.00393831 Jy
! Component: 3200  -  total flux cleaned = -0.003923 Jy
! Component: 3250  -  total flux cleaned = -0.00393809 Jy
! Component: 3300  -  total flux cleaned = -0.00395306 Jy
! Component: 3350  -  total flux cleaned = -0.00386346 Jy
! Component: 3400  -  total flux cleaned = -0.00387819 Jy
! Component: 3450  -  total flux cleaned = -0.0038635 Jy
! Component: 3500  -  total flux cleaned = -0.00386343 Jy
! Component: 3550  -  total flux cleaned = -0.00383453 Jy
! Component: 3600  -  total flux cleaned = -0.00384906 Jy
! Component: 3650  -  total flux cleaned = -0.00379164 Jy
! Component: 3700  -  total flux cleaned = -0.0038202 Jy
! Component: 3750  -  total flux cleaned = -0.00380614 Jy
! Component: 3800  -  total flux cleaned = -0.00380605 Jy
! Component: 3850  -  total flux cleaned = -0.00377829 Jy
! Component: 3900  -  total flux cleaned = -0.00377838 Jy
! Component: 3950  -  total flux cleaned = -0.00377838 Jy
! Component: 4000  -  total flux cleaned = -0.0037509 Jy
! Component: 4050  -  total flux cleaned = -0.00376456 Jy
! Total flux subtracted in 4096 components = -0.00375107 Jy
! Clean residual min=-0.000828 max=0.000908 Jy/beam
! Clean residual mean=0.000003 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.157708 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 412 components and 0.157708 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1856-2236_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.919 x 7.825 at -3.649 degrees (North through East)
! Clean map  min=-0.0023312  max=0.060826 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1856-2236_S_map.fits
wmodel /vlbi/uf001/uva//J1856-2236_S_map.mod
! Writing 412 model components to file: /vlbi/uf001/uva//J1856-2236_S_map.mod
wobs   /vlbi/uf001/uva//J1856-2236_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1856-2236_S_uvs.fits
wwins  /vlbi/uf001/uva//J1856-2236_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1856-2236_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0608261 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000237734 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17253 1.17253 2.34505 4.69011 9.38021 18.7604 37.5209 75.0417
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.06 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  255.857 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1856-2236_S_dfm.log closed on Mon Jan 14 04:52:32 2019