! Started logfile: /vlbi/uf001/uva//J1855+3742_S_dfm.log on Mon Jan 14 04:51:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1855+3742_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1855+3742_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.915789 visibilities/baseline/integration-bin.
! Found source: J1855+3742
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7047 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1855+3742_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012954Jy  sigma=24.373485
! Fit after  self-cal, rms=0.785540Jy  sigma=18.879824
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.977 mas, bmaj=5.408 mas, bpa=-4.162 degrees
! Estimated noise=0.576622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165192 Jy
! Component: 100  -  total flux cleaned = 0.203323 Jy
! Total flux subtracted in 100 components = 0.203323 Jy
! Clean residual min=-0.006747 max=0.014762 Jy/beam
! Clean residual mean=0.000006 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.203323 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.203323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063619Jy  sigma=1.461113
! Fit after  self-cal, rms=0.063608Jy  sigma=1.460881
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164218 Jy
! Component: 100  -  total flux cleaned = 0.0258162 Jy
! Total flux subtracted in 100 components = 0.0258162 Jy
! Clean residual min=-0.005189 max=0.011576 Jy/beam
! Clean residual mean=0.000004 rms=0.001356 Jy/beam
! Combined flux in latest and established models = 0.229139 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.229139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058789Jy  sigma=1.335631
! Fit after  self-cal, rms=0.058775Jy  sigma=1.335282
! Inverting map 
! Added new window around map position (-5.5, 11.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102393 Jy
! Component: 100  -  total flux cleaned = 0.0159115 Jy
! Total flux subtracted in 100 components = 0.0159115 Jy
! Clean residual min=-0.004862 max=0.004441 Jy/beam
! Clean residual mean=0.000001 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.24505 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.24505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056613Jy  sigma=1.281172
! Fit after  self-cal, rms=0.056492Jy  sigma=1.277894
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=6.093 mas, bpa=-2.968 degrees
! Estimated noise=0.371546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00633234 Jy
! Component: 100  -  total flux cleaned = 0.0103156 Jy
! Component: 150  -  total flux cleaned = 0.0132177 Jy
! Component: 200  -  total flux cleaned = 0.0153925 Jy
! Total flux subtracted in 200 components = 0.0153925 Jy
! Clean residual min=-0.003813 max=0.004676 Jy/beam
! Clean residual mean=-0.000000 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.260443 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 68 components and 0.260443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055642Jy  sigma=1.256679
! Fit after  self-cal, rms=0.055591Jy  sigma=1.255194
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.497 x 6.093 at -2.968 degrees (North through East)
! Clean map  min=-0.0035969  max=0.21368 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.02     KP        1.00     
!   LA        0.95     MK        1.06     NL        0.99     OV        1.01     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.06     NL        1.03     OV        1.02     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.94     MK        1.02     NL        1.03     OV        1.00     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.055591Jy  sigma=1.255194
! Fit after  self-cal, rms=0.055057Jy  sigma=1.235556
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.531 mas, bmaj=6.144 mas, bpa=-2.686 degrees
! Estimated noise=0.373315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115487 Jy
! Component: 100  -  total flux cleaned = 2.53973e-06 Jy
! Component: 150  -  total flux cleaned = 9.44062e-07 Jy
! Component: 200  -  total flux cleaned = -5.65231e-05 Jy
! Total flux subtracted in 200 components = -5.65231e-05 Jy
! Clean residual min=-0.002432 max=0.002757 Jy/beam
! Clean residual mean=-0.000003 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.260386 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.260386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054995Jy  sigma=1.234563
! Fit after  self-cal, rms=0.054991Jy  sigma=1.234433
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054991Jy  sigma=1.234433
! Fit after  self-cal, rms=0.055040Jy  sigma=1.218226
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.533 mas, bmaj=6.172 mas, bpa=-2.835 degrees
! Estimated noise=0.374048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.59662e-05 Jy
! Component: 100  -  total flux cleaned = -0.000171726 Jy
! Component: 150  -  total flux cleaned = -0.000230633 Jy
! Component: 200  -  total flux cleaned = -0.000308864 Jy
! Total flux subtracted in 200 components = -0.000308864 Jy
! Clean residual min=-0.002103 max=0.002301 Jy/beam
! Clean residual mean=0.000006 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.260078 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.260078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054995Jy  sigma=1.217336
! Fit after  self-cal, rms=0.055007Jy  sigma=1.217248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200401 Jy
! Component: 100  -  total flux cleaned = 0.00248311 Jy
! Component: 150  -  total flux cleaned = 0.00286336 Jy
! Component: 200  -  total flux cleaned = 0.0031337 Jy
! Total flux subtracted in 200 components = 0.0031337 Jy
! Clean residual min=-0.002016 max=0.001893 Jy/beam
! Clean residual mean=0.000003 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.263211 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.263211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054927Jy  sigma=1.215150
! Fit after  self-cal, rms=0.054923Jy  sigma=1.215072
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054923Jy  sigma=1.215072
! Fit after  self-cal, rms=0.054905Jy  sigma=1.214786
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=6.179 mas, bpa=-2.808 degrees
! Estimated noise=0.373736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100901 Jy
! Component: 100  -  total flux cleaned = 7.66289e-05 Jy
! Component: 150  -  total flux cleaned = 2.78619e-05 Jy
! Component: 200  -  total flux cleaned = -3.93723e-05 Jy
! Total flux subtracted in 200 components = -3.93723e-05 Jy
! Clean residual min=-0.002058 max=0.001841 Jy/beam
! Clean residual mean=0.000003 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.263172 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 120 components and 0.263172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054881Jy  sigma=1.214224
! Fit after  self-cal, rms=0.054882Jy  sigma=1.214206
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.1174e-05 Jy
! Component: 100  -  total flux cleaned = -5.16823e-05 Jy
! Component: 150  -  total flux cleaned = -7.17398e-05 Jy
! Component: 200  -  total flux cleaned = -7.09327e-05 Jy
! Total flux subtracted in 200 components = -7.09327e-05 Jy
! Clean residual min=-0.002059 max=0.001836 Jy/beam
! Clean residual mean=0.000003 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.263101 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 123 components and 0.263101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054868Jy  sigma=1.213885
! Fit after  self-cal, rms=0.054868Jy  sigma=1.213878
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054868Jy  sigma=1.213878
! Fit after  self-cal, rms=0.054840Jy  sigma=1.213822
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.658 mas, bmaj=9.4 mas, bpa=0.7985 degrees
! Estimated noise=0.472457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534737 Jy
! Component: 100  -  total flux cleaned = 0.000287564 Jy
! Component: 150  -  total flux cleaned = 0.000136324 Jy
! Component: 200  -  total flux cleaned = 7.24259e-05 Jy
! Total flux subtracted in 200 components = 7.24259e-05 Jy
! Clean residual min=-0.002158 max=0.002340 Jy/beam
! Clean residual mean=0.000005 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.263173 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 0.263173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054837Jy  sigma=1.213928
! Fit after  self-cal, rms=0.054838Jy  sigma=1.213883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.67319e-05 Jy
! Component: 100  -  total flux cleaned = -1.87704e-05 Jy
! Component: 150  -  total flux cleaned = -7.32378e-05 Jy
! Component: 200  -  total flux cleaned = -0.000110746 Jy
! Total flux subtracted in 200 components = -0.000110746 Jy
! Clean residual min=-0.002118 max=0.002263 Jy/beam
! Clean residual mean=0.000005 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.263063 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 144 components and 0.263063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054840Jy  sigma=1.213996
! Fit after  self-cal, rms=0.054840Jy  sigma=1.213989
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=6.183 mas, bpa=-2.809 degrees
! Estimated noise=0.373423 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.535 x 6.183 at -2.809 degrees (North through East)
! Clean map  min=-0.0019174  max=0.21472 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=5.478 mas, bpa=-4.075 degrees
! Estimated noise=0.583931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167145 Jy
! Component: 100  -  total flux cleaned = 0.204871 Jy
! Component: 150  -  total flux cleaned = 0.221071 Jy
! Component: 200  -  total flux cleaned = 0.23154 Jy
! Total flux subtracted in 200 components = 0.23154 Jy
! Clean residual min=-0.004729 max=0.005718 Jy/beam
! Clean residual mean=0.000006 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.23154 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.23154 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=6.183 mas, bpa=-2.809 degrees
! Estimated noise=0.373423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00871934 Jy
! Component: 100  -  total flux cleaned = 0.0144528 Jy
! Component: 150  -  total flux cleaned = 0.0184517 Jy
! Component: 200  -  total flux cleaned = 0.0214565 Jy
! Total flux subtracted in 200 components = 0.0214565 Jy
! Clean residual min=-0.002428 max=0.002567 Jy/beam
! Clean residual mean=0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.252997 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 65 components and 0.252997 Jy
! Inverting map 
! Added new window around map position (-9.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002807 Jy
! Component: 100  -  total flux cleaned = 0.00489565 Jy
! Component: 150  -  total flux cleaned = 0.00661141 Jy
! Component: 200  -  total flux cleaned = 0.00767629 Jy
! Total flux subtracted in 200 components = 0.00767629 Jy
! Clean residual min=-0.002112 max=0.001816 Jy/beam
! Clean residual mean=0.000003 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.260673 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 81 components and 0.260673 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.658 mas, bmaj=9.4 mas, bpa=0.7985 degrees
! Estimated noise=0.472457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159307 Jy
! Component: 100  -  total flux cleaned = 0.0025453 Jy
! Component: 150  -  total flux cleaned = 0.00284605 Jy
! Component: 200  -  total flux cleaned = 0.00304329 Jy
! Total flux subtracted in 200 components = 0.00304329 Jy
! Clean residual min=-0.002126 max=0.002154 Jy/beam
! Clean residual mean=0.000005 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.263716 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014437 Jy
! Component: 100  -  total flux cleaned = 0.00020879 Jy
! Component: 150  -  total flux cleaned = 0.000285384 Jy
! Component: 200  -  total flux cleaned = 0.000337958 Jy
! Total flux subtracted in 200 components = 0.000337958 Jy
! Clean residual min=-0.002083 max=0.002117 Jy/beam
! Clean residual mean=0.000004 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.264054 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 118 components and 0.264054 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=6.183 mas, bpa=-2.809 degrees
! Estimated noise=0.373423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000574763 Jy
! Component: 100  -  total flux cleaned = -0.000361461 Jy
! Component: 150  -  total flux cleaned = -0.000245058 Jy
! Component: 200  -  total flux cleaned = -0.000173155 Jy
! Total flux subtracted in 200 components = -0.000173155 Jy
! Clean residual min=-0.001977 max=0.001805 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.263881 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 130 components and 0.263881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054832Jy  sigma=1.213285
! Fit after  self-cal, rms=0.054823Jy  sigma=1.213073
wmodel J1855+3742_S_map.mod
! Writing 130 model components to file: J1855+3742_S_map.mod
wobs   J1855+3742_S_uvs.fits
! Writing UV FITS file: J1855+3742_S_uvs.fits
wwins  J1855+3742_S_map.win
! wwins: Wrote 4 windows to J1855+3742_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159059 Jy
! Component: 100  -  total flux cleaned = -0.000192084 Jy
! Component: 150  -  total flux cleaned = -0.000162321 Jy
! Component: 200  -  total flux cleaned = -0.000104299 Jy
! Component: 250  -  total flux cleaned = 3.50503e-05 Jy
! Component: 300  -  total flux cleaned = 0.000143452 Jy
! Component: 350  -  total flux cleaned = 0.000301592 Jy
! Component: 400  -  total flux cleaned = 0.0004814 Jy
! Component: 450  -  total flux cleaned = 0.00058204 Jy
! Component: 500  -  total flux cleaned = 0.000778842 Jy
! Component: 550  -  total flux cleaned = 0.000899274 Jy
! Component: 600  -  total flux cleaned = 0.00111119 Jy
! Component: 650  -  total flux cleaned = 0.00124956 Jy
! Component: 700  -  total flux cleaned = 0.00138572 Jy
! Component: 750  -  total flux cleaned = 0.00149724 Jy
! Component: 800  -  total flux cleaned = 0.00158545 Jy
! Component: 850  -  total flux cleaned = 0.0017148 Jy
! Component: 900  -  total flux cleaned = 0.00177861 Jy
! Component: 950  -  total flux cleaned = 0.00188282 Jy
! Component: 1000  -  total flux cleaned = 0.00194395 Jy
! Component: 1050  -  total flux cleaned = 0.00198422 Jy
! Component: 1100  -  total flux cleaned = 0.00198394 Jy
! Component: 1150  -  total flux cleaned = 0.00196445 Jy
! Component: 1200  -  total flux cleaned = 0.00196447 Jy
! Component: 1250  -  total flux cleaned = 0.00196466 Jy
! Component: 1300  -  total flux cleaned = 0.00192688 Jy
! Component: 1350  -  total flux cleaned = 0.00190841 Jy
! Component: 1400  -  total flux cleaned = 0.00190813 Jy
! Component: 1450  -  total flux cleaned = 0.00185352 Jy
! Component: 1500  -  total flux cleaned = 0.0018 Jy
! Component: 1550  -  total flux cleaned = 0.00181793 Jy
! Component: 1600  -  total flux cleaned = 0.00188751 Jy
! Component: 1650  -  total flux cleaned = 0.00185289 Jy
! Component: 1700  -  total flux cleaned = 0.00185286 Jy
! Component: 1750  -  total flux cleaned = 0.00185283 Jy
! Component: 1800  -  total flux cleaned = 0.00186929 Jy
! Component: 1850  -  total flux cleaned = 0.00183599 Jy
! Component: 1900  -  total flux cleaned = 0.00177036 Jy
! Component: 1950  -  total flux cleaned = 0.00173777 Jy
! Component: 2000  -  total flux cleaned = 0.00167383 Jy
! Component: 2050  -  total flux cleaned = 0.00173727 Jy
! Component: 2100  -  total flux cleaned = 0.00170585 Jy
! Component: 2150  -  total flux cleaned = 0.00167496 Jy
! Component: 2200  -  total flux cleaned = 0.00172143 Jy
! Component: 2250  -  total flux cleaned = 0.00169075 Jy
! Component: 2300  -  total flux cleaned = 0.00172109 Jy
! Component: 2350  -  total flux cleaned = 0.00172104 Jy
! Component: 2400  -  total flux cleaned = 0.00170612 Jy
! Component: 2450  -  total flux cleaned = 0.00173575 Jy
! Component: 2500  -  total flux cleaned = 0.00173577 Jy
! Component: 2550  -  total flux cleaned = 0.00173595 Jy
! Component: 2600  -  total flux cleaned = 0.00172162 Jy
! Component: 2650  -  total flux cleaned = 0.00173593 Jy
! Component: 2700  -  total flux cleaned = 0.00170761 Jy
! Component: 2750  -  total flux cleaned = 0.00172171 Jy
! Component: 2800  -  total flux cleaned = 0.00165203 Jy
! Component: 2850  -  total flux cleaned = 0.00163821 Jy
! Component: 2900  -  total flux cleaned = 0.00161106 Jy
! Component: 2950  -  total flux cleaned = 0.00163812 Jy
! Component: 3000  -  total flux cleaned = 0.00159765 Jy
! Component: 3050  -  total flux cleaned = 0.00158428 Jy
! Component: 3100  -  total flux cleaned = 0.00157096 Jy
! Component: 3150  -  total flux cleaned = 0.00153146 Jy
! Component: 3200  -  total flux cleaned = 0.0015183 Jy
! Component: 3250  -  total flux cleaned = 0.00154426 Jy
! Component: 3300  -  total flux cleaned = 0.00146698 Jy
! Component: 3350  -  total flux cleaned = 0.0015309 Jy
! Component: 3400  -  total flux cleaned = 0.00151815 Jy
! Component: 3450  -  total flux cleaned = 0.00148023 Jy
! Component: 3500  -  total flux cleaned = 0.00150549 Jy
! Component: 3550  -  total flux cleaned = 0.00151804 Jy
! Component: 3600  -  total flux cleaned = 0.00150573 Jy
! Component: 3650  -  total flux cleaned = 0.00156725 Jy
! Component: 3700  -  total flux cleaned = 0.0016038 Jy
! Component: 3750  -  total flux cleaned = 0.00161577 Jy
! Component: 3800  -  total flux cleaned = 0.0016038 Jy
! Component: 3850  -  total flux cleaned = 0.0017233 Jy
! Component: 3900  -  total flux cleaned = 0.00167576 Jy
! Component: 3950  -  total flux cleaned = 0.00172304 Jy
! Component: 4000  -  total flux cleaned = 0.00169954 Jy
! Component: 4050  -  total flux cleaned = 0.0017229 Jy
! Total flux subtracted in 4096 components = 0.00173447 Jy
! Clean residual min=-0.000785 max=0.000810 Jy/beam
! Clean residual mean=0.000000 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.265616 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 430 components and 0.265616 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1855+3742_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.535 x 6.183 at -2.809 degrees (North through East)
! Clean map  min=-0.001936  max=0.21531 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1855+3742_S_map.fits
wmodel /vlbi/uf001/uva//J1855+3742_S_map.mod
! Writing 430 model components to file: /vlbi/uf001/uva//J1855+3742_S_map.mod
wobs   /vlbi/uf001/uva//J1855+3742_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1855+3742_S_uvs.fits
wwins  /vlbi/uf001/uva//J1855+3742_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1855+3742_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.215306 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205926 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.28693 0.28693 0.573861 1.14772 2.29544 4.59088 9.18177 18.3635 36.7271 73.4541
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.215 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1045.55 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1855+3742_S_dfm.log closed on Mon Jan 14 04:51:31 2019