! Started logfile: /vlbi/uf001/uva//J1845+4007_X_dfm.log on Mon Jan 14 04:47:04 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1845+4007_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1845+4007_X_uva.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.926263 visibilities/baseline/integration-bin. ! Found source: J1845+4007 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 55020 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1845+4007_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002408Jy sigma=23.696248 ! Fit after self-cal, rms=0.923831Jy sigma=21.873800 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7095 mas, bmaj=1.222 mas, bpa=-14.11 degrees ! Estimated noise=0.31213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528825 Jy ! Component: 100 - total flux cleaned = 0.0729187 Jy ! Total flux subtracted in 100 components = 0.0729187 Jy ! Clean residual min=-0.006986 max=0.018422 Jy/beam ! Clean residual mean=-0.000004 rms=0.002055 Jy/beam ! Combined flux in latest and established models = 0.0729187 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0729187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094218Jy sigma=2.233452 ! Fit after self-cal, rms=0.092325Jy sigma=2.195833 ! Inverting map ! Added new window around map position (-3, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019555 Jy ! Component: 100 - total flux cleaned = 0.0326562 Jy ! Total flux subtracted in 100 components = 0.0326562 Jy ! Clean residual min=-0.006910 max=0.015777 Jy/beam ! Clean residual mean=-0.000004 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.105575 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 28 components and 0.105575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083630Jy sigma=1.986123 ! Fit after self-cal, rms=0.082361Jy sigma=1.960255 ! Inverting map ! Added new window around map position (-4.8, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185977 Jy ! Component: 100 - total flux cleaned = 0.031259 Jy ! Total flux subtracted in 100 components = 0.031259 Jy ! Clean residual min=-0.006075 max=0.010113 Jy/beam ! Clean residual mean=-0.000002 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.136834 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.136834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073860Jy sigma=1.743648 ! Fit after self-cal, rms=0.072711Jy sigma=1.713674 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133239 Jy ! Component: 100 - total flux cleaned = 0.0233301 Jy ! Total flux subtracted in 100 components = 0.0233301 Jy ! Clean residual min=-0.004963 max=0.009441 Jy/beam ! Clean residual mean=-0.000004 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.160164 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.160164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067153Jy sigma=1.570573 ! Fit after self-cal, rms=0.066779Jy sigma=1.560252 ! Inverting map ! Added new window around map position (-4.6, -5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105214 Jy ! Component: 100 - total flux cleaned = 0.0188569 Jy ! Total flux subtracted in 100 components = 0.0188569 Jy ! Clean residual min=-0.003915 max=0.006784 Jy/beam ! Clean residual mean=-0.000004 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.179021 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 0.179021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062956Jy sigma=1.460889 ! Fit after self-cal, rms=0.062865Jy sigma=1.457760 ! Inverting map ! Added new window around map position (-3.6, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794434 Jy ! Component: 100 - total flux cleaned = 0.01454 Jy ! Total flux subtracted in 100 components = 0.01454 Jy ! Clean residual min=-0.003316 max=0.006228 Jy/beam ! Clean residual mean=-0.000003 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.193561 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 91 components and 0.193561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060374Jy sigma=1.393054 ! Fit after self-cal, rms=0.060332Jy sigma=1.391549 ! Inverting map ! Added new window around map position (-1.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669935 Jy ! Component: 100 - total flux cleaned = 0.0123027 Jy ! Total flux subtracted in 100 components = 0.0123027 Jy ! Clean residual min=-0.003062 max=0.003848 Jy/beam ! Clean residual mean=-0.000004 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.205863 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 111 components and 0.205863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058504Jy sigma=1.344639 ! Fit after self-cal, rms=0.058484Jy sigma=1.344248 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9512 mas, bmaj=1.562 mas, bpa=-12.98 degrees ! Estimated noise=0.130181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113945 Jy ! Component: 100 - total flux cleaned = 0.0200795 Jy ! Component: 150 - total flux cleaned = 0.0271322 Jy ! Component: 200 - total flux cleaned = 0.0329753 Jy ! Total flux subtracted in 200 components = 0.0329753 Jy ! Clean residual min=-0.003394 max=0.004207 Jy/beam ! Clean residual mean=-0.000013 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.238839 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 173 components and 0.238839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055259Jy sigma=1.259603 ! Fit after self-cal, rms=0.055157Jy sigma=1.256914 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9512 x 1.562 at -12.98 degrees (North through East) ! Clean map min=-0.0032742 max=0.073008 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.98 KP 0.99 ! LA 0.91 MK 1.05 NL 1.07 OV 0.90 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.98 KP 0.99 ! LA 0.94 MK 1.11 NL 1.06 OV 0.91 ! PT 0.86 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.95 KP 0.99 ! LA 0.94 MK 1.04 NL 1.07 OV 0.89 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.91 KP 1.01 ! LA 0.94 MK 1.04 NL 1.07 OV 0.91 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.96 KP 1.01 ! LA 0.93 MK 1.05 NL 1.07 OV 0.90 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.96 KP 1.01 ! LA 0.93 MK 1.09 NL 1.10 OV 0.91 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.94 KP 1.02 ! LA 0.92 MK 1.05 NL 1.05 OV 0.90 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.94 KP 1.02 ! LA 0.94 MK 1.09 NL 1.07 OV 0.91 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.01 KP 1.00 ! LA 0.93 MK 1.00 NL 1.06 OV 0.92 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.96 KP 1.04 ! LA 0.93 MK 1.04 NL 1.07 OV 0.92 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.98 KP 1.03 ! LA 0.94 MK 1.09 NL 1.09 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.98 KP 1.01 ! LA 0.94 MK 1.02 NL 1.09 OV 0.91 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.055157Jy sigma=1.256914 ! Fit after self-cal, rms=0.053421Jy sigma=1.220662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9704 mas, bmaj=1.587 mas, bpa=-12.8 degrees ! Estimated noise=0.126823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321057 Jy ! Component: 100 - total flux cleaned = 0.00525195 Jy ! Component: 150 - total flux cleaned = 0.00687063 Jy ! Component: 200 - total flux cleaned = 0.00747201 Jy ! Total flux subtracted in 200 components = 0.00747201 Jy ! Clean residual min=-0.001621 max=0.001881 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.246311 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 217 components and 0.246311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053200Jy sigma=1.213889 ! Fit after self-cal, rms=0.053235Jy sigma=1.213077 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053235Jy sigma=1.213077 ! Fit after self-cal, rms=0.052402Jy sigma=1.206243 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.968 mas, bmaj=1.582 mas, bpa=-13.07 degrees ! Estimated noise=0.126167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141156 Jy ! Component: 100 - total flux cleaned = 0.0023925 Jy ! Component: 150 - total flux cleaned = 0.00291245 Jy ! Component: 200 - total flux cleaned = 0.00315331 Jy ! Total flux subtracted in 200 components = 0.00315331 Jy ! Clean residual min=-0.001188 max=0.001337 Jy/beam ! Clean residual mean=0.000000 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.249464 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 238 components and 0.249464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052347Jy sigma=1.204736 ! Fit after self-cal, rms=0.052345Jy sigma=1.204536 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144807 Jy ! Component: 100 - total flux cleaned = 0.00213341 Jy ! Component: 150 - total flux cleaned = 0.00233675 Jy ! Component: 200 - total flux cleaned = 0.00241505 Jy ! Total flux subtracted in 200 components = 0.00241505 Jy ! Clean residual min=-0.001047 max=0.001075 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.251879 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 256 components and 0.251879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052294Jy sigma=1.203341 ! Fit after self-cal, rms=0.052287Jy sigma=1.203168 ! Inverting map ! Added new window around map position (8, 24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110204 Jy ! Component: 100 - total flux cleaned = 0.00150368 Jy ! Component: 150 - total flux cleaned = 0.00172321 Jy ! Component: 200 - total flux cleaned = 0.00185591 Jy ! Total flux subtracted in 200 components = 0.00185591 Jy ! Clean residual min=-0.001049 max=0.001019 Jy/beam ! Clean residual mean=0.000001 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.253735 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 271 components and 0.253735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052253Jy sigma=1.202441 ! Fit after self-cal, rms=0.052250Jy sigma=1.202383 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052250Jy sigma=1.202383 ! Fit after self-cal, rms=0.051981Jy sigma=1.202038 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9655 mas, bmaj=1.581 mas, bpa=-13.23 degrees ! Estimated noise=0.125864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868317 Jy ! Component: 100 - total flux cleaned = 0.00144499 Jy ! Component: 150 - total flux cleaned = 0.00193079 Jy ! Component: 200 - total flux cleaned = 0.00225479 Jy ! Total flux subtracted in 200 components = 0.00225479 Jy ! Clean residual min=-0.000908 max=0.000944 Jy/beam ! Clean residual mean=0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.25599 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 287 components and 0.25599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051957Jy sigma=1.201461 ! Fit after self-cal, rms=0.051950Jy sigma=1.201405 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789346 Jy ! Component: 100 - total flux cleaned = 0.00120691 Jy ! Component: 150 - total flux cleaned = 0.00151185 Jy ! Component: 200 - total flux cleaned = 0.00175382 Jy ! Total flux subtracted in 200 components = 0.00175382 Jy ! Clean residual min=-0.000866 max=0.000786 Jy/beam ! Clean residual mean=0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.257743 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 307 components and 0.257743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051931Jy sigma=1.200931 ! Fit after self-cal, rms=0.051929Jy sigma=1.200903 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051929Jy sigma=1.200903 ! Fit after self-cal, rms=0.051765Jy sigma=1.200780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=2.598 mas, bpa=-12.48 degrees ! Estimated noise=0.153886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062039 Jy ! Component: 100 - total flux cleaned = 0.000993306 Jy ! Component: 150 - total flux cleaned = 0.00124925 Jy ! Component: 200 - total flux cleaned = 0.00144907 Jy ! Total flux subtracted in 200 components = 0.00144907 Jy ! Clean residual min=-0.000806 max=0.001068 Jy/beam ! Clean residual mean=0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.259193 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 332 components and 0.259192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051756Jy sigma=1.200551 ! Fit after self-cal, rms=0.051754Jy sigma=1.200508 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.2, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105117 Jy ! Component: 100 - total flux cleaned = 0.00169096 Jy ! Component: 150 - total flux cleaned = 0.00190166 Jy ! Component: 200 - total flux cleaned = 0.00209462 Jy ! Total flux subtracted in 200 components = 0.00209462 Jy ! Clean residual min=-0.000811 max=0.000801 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.261287 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 366 components and 0.261287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051737Jy sigma=1.200095 ! Fit after self-cal, rms=0.051736Jy sigma=1.200065 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9651 mas, bmaj=1.581 mas, bpa=-13.27 degrees ! Estimated noise=0.12564 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9651 x 1.581 at -13.27 degrees (North through East) ! Clean map min=-0.00071484 max=0.07037 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7159 mas, bmaj=1.235 mas, bpa=-14.58 degrees ! Estimated noise=0.305006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545317 Jy ! Component: 100 - total flux cleaned = 0.0831724 Jy ! Component: 150 - total flux cleaned = 0.104863 Jy ! Component: 200 - total flux cleaned = 0.122148 Jy ! Total flux subtracted in 200 components = 0.122148 Jy ! Clean residual min=-0.005157 max=0.010362 Jy/beam ! Clean residual mean=-0.000006 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.122148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.122148 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9651 mas, bmaj=1.581 mas, bpa=-13.27 degrees ! Estimated noise=0.12564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258382 Jy ! Component: 100 - total flux cleaned = 0.0444764 Jy ! Component: 150 - total flux cleaned = 0.0590401 Jy ! Component: 200 - total flux cleaned = 0.0706095 Jy ! Total flux subtracted in 200 components = 0.0706095 Jy ! Clean residual min=-0.003451 max=0.006880 Jy/beam ! Clean residual mean=-0.000016 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.192758 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 95 components and 0.192758 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931217 Jy ! Component: 100 - total flux cleaned = 0.016925 Jy ! Component: 150 - total flux cleaned = 0.0232188 Jy ! Component: 200 - total flux cleaned = 0.0284537 Jy ! Total flux subtracted in 200 components = 0.0284537 Jy ! Clean residual min=-0.002062 max=0.003189 Jy/beam ! Clean residual mean=-0.000008 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.221211 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 151 components and 0.221211 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438908 Jy ! Component: 100 - total flux cleaned = 0.0081046 Jy ! Component: 150 - total flux cleaned = 0.0113068 Jy ! Component: 200 - total flux cleaned = 0.0141114 Jy ! Total flux subtracted in 200 components = 0.0141114 Jy ! Clean residual min=-0.001522 max=0.001769 Jy/beam ! Clean residual mean=-0.000005 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.235323 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 211 components and 0.235323 Jy ! Inverting map ! Added new window around map position (-5.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247414 Jy ! Component: 100 - total flux cleaned = 0.00466715 Jy ! Component: 150 - total flux cleaned = 0.00661536 Jy ! Component: 200 - total flux cleaned = 0.0083516 Jy ! Total flux subtracted in 200 components = 0.0083516 Jy ! Clean residual min=-0.001210 max=0.001141 Jy/beam ! Clean residual mean=-0.000003 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.243674 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 251 components and 0.243674 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=2.598 mas, bpa=-12.48 degrees ! Estimated noise=0.153886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281595 Jy ! Component: 100 - total flux cleaned = 0.00495565 Jy ! Component: 150 - total flux cleaned = 0.00671928 Jy ! Component: 200 - total flux cleaned = 0.00821119 Jy ! Total flux subtracted in 200 components = 0.00821119 Jy ! Clean residual min=-0.001090 max=0.001130 Jy/beam ! Clean residual mean=-0.000003 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.251885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127941 Jy ! Component: 100 - total flux cleaned = 0.00238807 Jy ! Component: 150 - total flux cleaned = 0.00336078 Jy ! Component: 200 - total flux cleaned = 0.0042213 Jy ! Total flux subtracted in 200 components = 0.0042213 Jy ! Clean residual min=-0.000886 max=0.000896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.256107 Jy ! Adding 165 model components to the UV plane model. ! The established model now contains 373 components and 0.256107 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9651 mas, bmaj=1.581 mas, bpa=-13.27 degrees ! Estimated noise=0.12564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844382 Jy ! Component: 100 - total flux cleaned = 0.00152762 Jy ! Component: 150 - total flux cleaned = 0.00204054 Jy ! Component: 200 - total flux cleaned = 0.00244623 Jy ! Total flux subtracted in 200 components = 0.00244623 Jy ! Clean residual min=-0.000793 max=0.000769 Jy/beam ! Clean residual mean=-0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.258553 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 401 components and 0.258553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051741Jy sigma=1.200296 ! Fit after self-cal, rms=0.051727Jy sigma=1.199966 wmodel J1845+4007_X_map.mod ! Writing 401 model components to file: J1845+4007_X_map.mod wobs J1845+4007_X_uvs.fits ! Writing UV FITS file: J1845+4007_X_uvs.fits wwins J1845+4007_X_map.win ! wwins: Wrote 13 windows to J1845+4007_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198834 Jy ! Component: 100 - total flux cleaned = -0.000330035 Jy ! Component: 150 - total flux cleaned = -0.000406094 Jy ! Component: 200 - total flux cleaned = -0.000467895 Jy ! Component: 250 - total flux cleaned = -0.000516127 Jy ! Component: 300 - total flux cleaned = -0.000551305 Jy ! Component: 350 - total flux cleaned = -0.000585524 Jy ! Component: 400 - total flux cleaned = -0.000607828 Jy ! Component: 450 - total flux cleaned = -0.00060785 Jy ! Component: 500 - total flux cleaned = -0.000650872 Jy ! Component: 550 - total flux cleaned = -0.000640197 Jy ! Component: 600 - total flux cleaned = -0.000661014 Jy ! Component: 650 - total flux cleaned = -0.000650703 Jy ! Component: 700 - total flux cleaned = -0.000650693 Jy ! Component: 750 - total flux cleaned = -0.000640656 Jy ! Component: 800 - total flux cleaned = -0.000620999 Jy ! Component: 850 - total flux cleaned = -0.000630794 Jy ! Component: 900 - total flux cleaned = -0.000602177 Jy ! Component: 950 - total flux cleaned = -0.000611764 Jy ! Component: 1000 - total flux cleaned = -0.000620975 Jy ! Component: 1050 - total flux cleaned = -0.000602636 Jy ! Component: 1100 - total flux cleaned = -0.00061177 Jy ! Component: 1150 - total flux cleaned = -0.000629788 Jy ! Component: 1200 - total flux cleaned = -0.000629583 Jy ! Component: 1250 - total flux cleaned = -0.000629431 Jy ! Component: 1300 - total flux cleaned = -0.000620854 Jy ! Component: 1350 - total flux cleaned = -0.000689728 Jy ! Component: 1400 - total flux cleaned = -0.000655505 Jy ! Component: 1450 - total flux cleaned = -0.000731306 Jy ! Component: 1500 - total flux cleaned = -0.000697915 Jy ! Component: 1550 - total flux cleaned = -0.000747475 Jy ! Component: 1600 - total flux cleaned = -0.000739189 Jy ! Component: 1650 - total flux cleaned = -0.000747245 Jy ! Component: 1700 - total flux cleaned = -0.000755354 Jy ! Component: 1750 - total flux cleaned = -0.000755331 Jy ! Component: 1800 - total flux cleaned = -0.000739703 Jy ! Component: 1850 - total flux cleaned = -0.00075531 Jy ! Component: 1900 - total flux cleaned = -0.000778501 Jy ! Component: 1950 - total flux cleaned = -0.000740126 Jy ! Component: 2000 - total flux cleaned = -0.000763041 Jy ! Component: 2050 - total flux cleaned = -0.000793191 Jy ! Component: 2100 - total flux cleaned = -0.000785588 Jy ! Component: 2150 - total flux cleaned = -0.000792921 Jy ! Component: 2200 - total flux cleaned = -0.000807606 Jy ! Component: 2250 - total flux cleaned = -0.000792887 Jy ! Component: 2300 - total flux cleaned = -0.000792899 Jy ! Component: 2350 - total flux cleaned = -0.000792867 Jy ! Component: 2400 - total flux cleaned = -0.000814343 Jy ! Component: 2450 - total flux cleaned = -0.000785889 Jy ! Component: 2500 - total flux cleaned = -0.000800021 Jy ! Component: 2550 - total flux cleaned = -0.000814058 Jy ! Component: 2600 - total flux cleaned = -0.000827933 Jy ! Component: 2650 - total flux cleaned = -0.000786482 Jy ! Component: 2700 - total flux cleaned = -0.000807052 Jy ! Component: 2750 - total flux cleaned = -0.000766179 Jy ! Component: 2800 - total flux cleaned = -0.000779747 Jy ! Component: 2850 - total flux cleaned = -0.000752756 Jy ! Component: 2900 - total flux cleaned = -0.000739356 Jy ! Component: 2950 - total flux cleaned = -0.000739319 Jy ! Component: 3000 - total flux cleaned = -0.00070628 Jy ! Component: 3050 - total flux cleaned = -0.000686503 Jy ! Component: 3100 - total flux cleaned = -0.00071259 Jy ! Component: 3150 - total flux cleaned = -0.000660686 Jy ! Component: 3200 - total flux cleaned = -0.000641393 Jy ! Component: 3250 - total flux cleaned = -0.000673474 Jy ! Component: 3300 - total flux cleaned = -0.000673508 Jy ! Component: 3350 - total flux cleaned = -0.000635487 Jy ! Component: 3400 - total flux cleaned = -0.000641787 Jy ! Component: 3450 - total flux cleaned = -0.000654344 Jy ! Component: 3500 - total flux cleaned = -0.000585842 Jy ! Component: 3550 - total flux cleaned = -0.000610625 Jy ! Component: 3600 - total flux cleaned = -0.000616766 Jy ! Component: 3650 - total flux cleaned = -0.000586136 Jy ! Component: 3700 - total flux cleaned = -0.000598332 Jy ! Component: 3750 - total flux cleaned = -0.000586231 Jy ! Component: 3800 - total flux cleaned = -0.000568127 Jy ! Component: 3850 - total flux cleaned = -0.000580126 Jy ! Component: 3900 - total flux cleaned = -0.000562285 Jy ! Component: 3950 - total flux cleaned = -0.000544502 Jy ! Component: 4000 - total flux cleaned = -0.000520924 Jy ! Component: 4050 - total flux cleaned = -0.000562043 Jy ! Total flux subtracted in 4096 components = -0.000550376 Jy ! Clean residual min=-0.000383 max=0.000395 Jy/beam ! Clean residual mean=-0.000000 rms=0.000100 Jy/beam ! Combined flux in latest and established models = 0.258002 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 717 components and 0.258002 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1845+4007_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9651 x 1.581 at -13.27 degrees (North through East) ! Clean map min=-0.00057462 max=0.07046 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1845+4007_X_map.fits wmodel /vlbi/uf001/uva//J1845+4007_X_map.mod ! Writing 717 model components to file: /vlbi/uf001/uva//J1845+4007_X_map.mod wobs /vlbi/uf001/uva//J1845+4007_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1845+4007_X_uvs.fits wwins /vlbi/uf001/uva//J1845+4007_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J1845+4007_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0704596 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.8977e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.42142 0.42142 0.842841 1.68568 3.37136 6.74273 13.4855 26.9709 53.9418 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.07 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 711.878 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1845+4007_X_dfm.log closed on Mon Jan 14 04:47:13 2019