! Started logfile: /vlbi/uf001/uva//J1845+3541_X_dfm.log on Mon Jan 14 04:46:50 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1845+3541_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1845+3541_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784656 visibilities/baseline/integration-bin. ! Found source: J1845+3541 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 17796 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1845+3541_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022558Jy sigma=21.784617 ! Fit after self-cal, rms=0.850606Jy sigma=18.213103 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7369 mas, bmaj=1.217 mas, bpa=-1.057 degrees ! Estimated noise=0.476632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106779 Jy ! Component: 100 - total flux cleaned = 0.151543 Jy ! Total flux subtracted in 100 components = 0.151543 Jy ! Clean residual min=-0.019204 max=0.053472 Jy/beam ! Clean residual mean=-0.000027 rms=0.005298 Jy/beam ! Combined flux in latest and established models = 0.151543 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.151543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.157273Jy sigma=3.333073 ! Fit after self-cal, rms=0.156751Jy sigma=3.322712 ! Inverting map ! Added new window around map position (-4.4, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498031 Jy ! Component: 100 - total flux cleaned = 0.0793593 Jy ! Total flux subtracted in 100 components = 0.0793593 Jy ! Clean residual min=-0.015145 max=0.043614 Jy/beam ! Clean residual mean=-0.000021 rms=0.004156 Jy/beam ! Combined flux in latest and established models = 0.230902 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.230902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135175Jy sigma=2.823407 ! Fit after self-cal, rms=0.124524Jy sigma=2.613933 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438878 Jy ! Component: 100 - total flux cleaned = 0.065877 Jy ! Total flux subtracted in 100 components = 0.065877 Jy ! Clean residual min=-0.012608 max=0.018528 Jy/beam ! Clean residual mean=-0.000013 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 0.296779 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.296779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104727Jy sigma=2.128556 ! Fit after self-cal, rms=0.099387Jy sigma=2.026892 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271916 Jy ! Component: 100 - total flux cleaned = 0.041579 Jy ! Total flux subtracted in 100 components = 0.041579 Jy ! Clean residual min=-0.010960 max=0.020359 Jy/beam ! Clean residual mean=-0.000009 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.338358 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.338358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089619Jy sigma=1.776159 ! Fit after self-cal, rms=0.087649Jy sigma=1.739995 ! Inverting map ! Added new window around map position (-1.4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213253 Jy ! Component: 100 - total flux cleaned = 0.0349428 Jy ! Total flux subtracted in 100 components = 0.0349428 Jy ! Clean residual min=-0.008713 max=0.015242 Jy/beam ! Clean residual mean=-0.000008 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 0.373301 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.373301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080003Jy sigma=1.554955 ! Fit after self-cal, rms=0.079362Jy sigma=1.540087 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153273 Jy ! Component: 100 - total flux cleaned = 0.0263106 Jy ! Total flux subtracted in 100 components = 0.0263106 Jy ! Clean residual min=-0.007205 max=0.010578 Jy/beam ! Clean residual mean=-0.000007 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.399612 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.399612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074712Jy sigma=1.431191 ! Fit after self-cal, rms=0.074607Jy sigma=1.428836 ! Inverting map ! Added new window around map position (-2.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107312 Jy ! Component: 100 - total flux cleaned = 0.0185755 Jy ! Total flux subtracted in 100 components = 0.0185755 Jy ! Clean residual min=-0.007025 max=0.007048 Jy/beam ! Clean residual mean=-0.000006 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.418187 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.418187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072013Jy sigma=1.369454 ! Fit after self-cal, rms=0.071946Jy sigma=1.367862 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9334 mas, bmaj=1.467 mas, bpa=-1.507 degrees ! Estimated noise=0.275379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114129 Jy ! Component: 100 - total flux cleaned = 0.0203906 Jy ! Component: 150 - total flux cleaned = 0.0276338 Jy ! Component: 200 - total flux cleaned = 0.0335403 Jy ! Total flux subtracted in 200 components = 0.0335403 Jy ! Clean residual min=-0.006043 max=0.007537 Jy/beam ! Clean residual mean=-0.000027 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.451728 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.451728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069189Jy sigma=1.299437 ! Fit after self-cal, rms=0.069089Jy sigma=1.297348 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9334 x 1.467 at -1.507 degrees (North through East) ! Clean map min=-0.005453 max=0.1298 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.97 KP 1.01 ! LA 0.94 MK 1.01 NL 1.11 OV 0.90 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.00 KP 1.02 ! LA 0.94 MK 1.02 NL 1.12 OV 0.90 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.04 KP 1.01 ! LA 0.95 MK 1.02 NL 1.10 OV 0.88 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 1.01 ! LA 0.93 MK 1.03 NL 1.14 OV 0.91 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.95 KP 1.03 ! LA 0.93 MK 1.01 NL 1.14 OV 0.92 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.00 KP 1.02 ! LA 0.96 MK 1.02 NL 1.12 OV 0.90 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.97 KP 1.05 ! LA 0.94 MK 1.02 NL 1.13 OV 0.89 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.00 KP 1.02 ! LA 0.94 MK 1.01 NL 1.12 OV 0.91 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 1.03 ! LA 0.96 MK 1.01 NL 1.14 OV 0.90 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.02 KP 1.06 ! LA 0.95 MK 1.04 NL 1.18 OV 0.91 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.02 KP 1.04 ! LA 0.96 MK 1.04 NL 1.12 OV 0.90 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.01 KP 1.01 ! LA 0.96 MK 1.05 NL 1.16 OV 0.91 ! PT 0.96 SC 0.94 ! ! ! Fit before self-cal, rms=0.069089Jy sigma=1.297348 ! Fit after self-cal, rms=0.066410Jy sigma=1.215026 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9353 mas, bmaj=1.476 mas, bpa=-0.5757 degrees ! Estimated noise=0.275758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149163 Jy ! Component: 100 - total flux cleaned = 0.00119408 Jy ! Component: 150 - total flux cleaned = 0.000699489 Jy ! Component: 200 - total flux cleaned = 0.000801976 Jy ! Total flux subtracted in 200 components = 0.000801976 Jy ! Clean residual min=-0.003460 max=0.004403 Jy/beam ! Clean residual mean=-0.000006 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.45253 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.45253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065758Jy sigma=1.199491 ! Fit after self-cal, rms=0.065753Jy sigma=1.197480 ! Inverting map ! Added new window around map position (1, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223187 Jy ! Component: 100 - total flux cleaned = 0.00211715 Jy ! Component: 150 - total flux cleaned = 0.00259793 Jy ! Component: 200 - total flux cleaned = 0.00259845 Jy ! Total flux subtracted in 200 components = 0.00259845 Jy ! Clean residual min=-0.002823 max=0.003814 Jy/beam ! Clean residual mean=-0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.455128 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.455128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065401Jy sigma=1.188936 ! Fit after self-cal, rms=0.065376Jy sigma=1.188337 ! Inverting map ! Added new window around map position (2.6, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241208 Jy ! Component: 100 - total flux cleaned = 0.00273336 Jy ! Component: 150 - total flux cleaned = 0.00255432 Jy ! Component: 200 - total flux cleaned = 0.00255525 Jy ! Total flux subtracted in 200 components = 0.00255525 Jy ! Clean residual min=-0.002712 max=0.002937 Jy/beam ! Clean residual mean=-0.000003 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.457683 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.457683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065052Jy sigma=1.181245 ! Fit after self-cal, rms=0.065031Jy sigma=1.180861 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065031Jy sigma=1.180861 ! Fit after self-cal, rms=0.068658Jy sigma=1.170371 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=1.475 mas, bpa=-0.1611 degrees ! Estimated noise=0.275594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435155 Jy ! Component: 100 - total flux cleaned = -0.000509224 Jy ! Component: 150 - total flux cleaned = -0.000444829 Jy ! Component: 200 - total flux cleaned = -0.000326109 Jy ! Total flux subtracted in 200 components = -0.000326109 Jy ! Clean residual min=-0.002142 max=0.002131 Jy/beam ! Clean residual mean=-0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.457357 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 136 components and 0.457357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068521Jy sigma=1.166631 ! Fit after self-cal, rms=0.068599Jy sigma=1.166367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126971 Jy ! Component: 100 - total flux cleaned = 0.0015061 Jy ! Component: 150 - total flux cleaned = 0.00166728 Jy ! Component: 200 - total flux cleaned = 0.00171563 Jy ! Total flux subtracted in 200 components = 0.00171563 Jy ! Clean residual min=-0.001911 max=0.001897 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.459073 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 150 components and 0.459073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068502Jy sigma=1.163864 ! Fit after self-cal, rms=0.068498Jy sigma=1.163780 ! Inverting map ! Added new window around map position (-12, -25.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741183 Jy ! Component: 100 - total flux cleaned = 0.0005834 Jy ! Component: 150 - total flux cleaned = 0.000677187 Jy ! Component: 200 - total flux cleaned = 0.000720593 Jy ! Total flux subtracted in 200 components = 0.000720593 Jy ! Clean residual min=-0.001807 max=0.001643 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.459793 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 166 components and 0.459793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068416Jy sigma=1.161850 ! Fit after self-cal, rms=0.068418Jy sigma=1.161767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068418Jy sigma=1.161767 ! Fit after self-cal, rms=0.068785Jy sigma=1.161533 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.934 mas, bmaj=1.475 mas, bpa=0.03077 degrees ! Estimated noise=0.275254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269311 Jy ! Component: 100 - total flux cleaned = -0.000270927 Jy ! Component: 150 - total flux cleaned = -0.000148546 Jy ! Component: 200 - total flux cleaned = -0.000148813 Jy ! Total flux subtracted in 200 components = -0.000148813 Jy ! Clean residual min=-0.001657 max=0.001589 Jy/beam ! Clean residual mean=-0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.459645 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 174 components and 0.459645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068738Jy sigma=1.160321 ! Fit after self-cal, rms=0.068743Jy sigma=1.160288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.06793e-05 Jy ! Component: 100 - total flux cleaned = 4.04647e-05 Jy ! Component: 150 - total flux cleaned = 4.15798e-05 Jy ! Component: 200 - total flux cleaned = 7.62865e-05 Jy ! Total flux subtracted in 200 components = 7.62865e-05 Jy ! Clean residual min=-0.001565 max=0.001581 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.459721 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 182 components and 0.459721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068708Jy sigma=1.159443 ! Fit after self-cal, rms=0.068710Jy sigma=1.159420 ! Inverting map ! Added new window around map position (-5.2, -34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823243 Jy ! Component: 100 - total flux cleaned = 0.00086371 Jy ! Component: 150 - total flux cleaned = 0.000792549 Jy ! Component: 200 - total flux cleaned = 0.00075984 Jy ! Total flux subtracted in 200 components = 0.00075984 Jy ! Clean residual min=-0.001440 max=0.001384 Jy/beam ! Clean residual mean=-0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.460481 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 196 components and 0.460481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068654Jy sigma=1.158427 ! Fit after self-cal, rms=0.068653Jy sigma=1.158396 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068653Jy sigma=1.158396 ! Fit after self-cal, rms=0.068657Jy sigma=1.158313 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=2.544 mas, bpa=-1.09 degrees ! Estimated noise=0.344422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483117 Jy ! Component: 100 - total flux cleaned = 0.000520736 Jy ! Component: 150 - total flux cleaned = 0.000406573 Jy ! Component: 200 - total flux cleaned = 0.000353155 Jy ! Total flux subtracted in 200 components = 0.000353155 Jy ! Clean residual min=-0.001455 max=0.001419 Jy/beam ! Clean residual mean=-0.000005 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.460834 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 211 components and 0.460834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068644Jy sigma=1.157931 ! Fit after self-cal, rms=0.068642Jy sigma=1.157906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96007e-05 Jy ! Component: 100 - total flux cleaned = -0.000122755 Jy ! Component: 150 - total flux cleaned = -0.000213177 Jy ! Component: 200 - total flux cleaned = -0.000296308 Jy ! Total flux subtracted in 200 components = -0.000296308 Jy ! Clean residual min=-0.001426 max=0.001356 Jy/beam ! Clean residual mean=-0.000005 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.460538 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 222 components and 0.460538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068636Jy sigma=1.157732 ! Fit after self-cal, rms=0.068634Jy sigma=1.157720 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9336 mas, bmaj=1.476 mas, bpa=0.1391 degrees ! Estimated noise=0.274873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9336 x 1.476 at 0.1391 degrees (North through East) ! Clean map min=-0.001833 max=0.12819 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7344 mas, bmaj=1.224 mas, bpa=0.7207 degrees ! Estimated noise=0.477214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123926 Jy ! Component: 100 - total flux cleaned = 0.193068 Jy ! Component: 150 - total flux cleaned = 0.237513 Jy ! Component: 200 - total flux cleaned = 0.270409 Jy ! Total flux subtracted in 200 components = 0.270409 Jy ! Clean residual min=-0.009560 max=0.019284 Jy/beam ! Clean residual mean=-0.000014 rms=0.002706 Jy/beam ! Combined flux in latest and established models = 0.270409 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.270409 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9336 mas, bmaj=1.476 mas, bpa=0.1391 degrees ! Estimated noise=0.274873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408841 Jy ! Component: 100 - total flux cleaned = 0.0702056 Jy ! Component: 150 - total flux cleaned = 0.0920352 Jy ! Component: 200 - total flux cleaned = 0.108496 Jy ! Total flux subtracted in 200 components = 0.108496 Jy ! Clean residual min=-0.004586 max=0.010126 Jy/beam ! Clean residual mean=-0.000040 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.378905 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 52 components and 0.378905 Jy ! Inverting map ! Added new window around map position (-5.2, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126953 Jy ! Component: 100 - total flux cleaned = 0.0225545 Jy ! Component: 150 - total flux cleaned = 0.03049 Jy ! Component: 200 - total flux cleaned = 0.0370209 Jy ! Total flux subtracted in 200 components = 0.0370209 Jy ! Clean residual min=-0.002842 max=0.004366 Jy/beam ! Clean residual mean=-0.000023 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.415926 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 90 components and 0.415926 Jy ! Inverting map ! Added new window around map position (1, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055151 Jy ! Component: 100 - total flux cleaned = 0.0101108 Jy ! Component: 150 - total flux cleaned = 0.0140005 Jy ! Component: 200 - total flux cleaned = 0.0173231 Jy ! Total flux subtracted in 200 components = 0.0173231 Jy ! Clean residual min=-0.002146 max=0.002520 Jy/beam ! Clean residual mean=-0.000015 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.433249 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 123 components and 0.433249 Jy ! Inverting map ! Added new window around map position (15.2, 33.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295083 Jy ! Component: 100 - total flux cleaned = 0.00546606 Jy ! Component: 150 - total flux cleaned = 0.00769261 Jy ! Component: 200 - total flux cleaned = 0.00960108 Jy ! Total flux subtracted in 200 components = 0.00960108 Jy ! Clean residual min=-0.001870 max=0.001917 Jy/beam ! Clean residual mean=-0.000011 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.44285 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 153 components and 0.44285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=2.544 mas, bpa=-1.09 degrees ! Estimated noise=0.344422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324517 Jy ! Component: 100 - total flux cleaned = 0.00570165 Jy ! Component: 150 - total flux cleaned = 0.00766146 Jy ! Component: 200 - total flux cleaned = 0.00931062 Jy ! Total flux subtracted in 200 components = 0.00931062 Jy ! Clean residual min=-0.001933 max=0.002026 Jy/beam ! Clean residual mean=-0.000015 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.45216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144887 Jy ! Component: 100 - total flux cleaned = 0.00273361 Jy ! Component: 150 - total flux cleaned = 0.00351891 Jy ! Component: 200 - total flux cleaned = 0.004274 Jy ! Total flux subtracted in 200 components = 0.004274 Jy ! Clean residual min=-0.001667 max=0.001739 Jy/beam ! Clean residual mean=-0.000011 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.456434 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 237 components and 0.456435 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9336 mas, bmaj=1.476 mas, bpa=0.1391 degrees ! Estimated noise=0.274873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290396 Jy ! Component: 100 - total flux cleaned = 0.000334685 Jy ! Component: 150 - total flux cleaned = 0.000538865 Jy ! Component: 200 - total flux cleaned = 0.00068772 Jy ! Total flux subtracted in 200 components = 0.00068772 Jy ! Clean residual min=-0.001434 max=0.001417 Jy/beam ! Clean residual mean=-0.000005 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.457122 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 256 components and 0.457122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068568Jy sigma=1.157473 ! Fit after self-cal, rms=0.068517Jy sigma=1.156584 wmodel J1845+3541_X_map.mod ! Writing 256 model components to file: J1845+3541_X_map.mod wobs J1845+3541_X_uvs.fits ! Writing UV FITS file: J1845+3541_X_uvs.fits wwins J1845+3541_X_map.win ! wwins: Wrote 14 windows to J1845+3541_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208116 Jy ! Component: 100 - total flux cleaned = 0.000278378 Jy ! Component: 150 - total flux cleaned = 0.000391089 Jy ! Component: 200 - total flux cleaned = 0.00054367 Jy ! Component: 250 - total flux cleaned = 0.00058571 Jy ! Component: 300 - total flux cleaned = 0.000688919 Jy ! Component: 350 - total flux cleaned = 0.00078998 Jy ! Component: 400 - total flux cleaned = 0.000869574 Jy ! Component: 450 - total flux cleaned = 0.000948099 Jy ! Component: 500 - total flux cleaned = 0.00102532 Jy ! Component: 550 - total flux cleaned = 0.00111971 Jy ! Component: 600 - total flux cleaned = 0.00115711 Jy ! Component: 650 - total flux cleaned = 0.00119421 Jy ! Component: 700 - total flux cleaned = 0.00117601 Jy ! Component: 750 - total flux cleaned = 0.00114046 Jy ! Component: 800 - total flux cleaned = 0.00115796 Jy ! Component: 850 - total flux cleaned = 0.0010021 Jy ! Component: 900 - total flux cleaned = 0.000984941 Jy ! Component: 950 - total flux cleaned = 0.000866572 Jy ! Component: 1000 - total flux cleaned = 0.000833118 Jy ! Component: 1050 - total flux cleaned = 0.000816565 Jy ! Component: 1100 - total flux cleaned = 0.000783947 Jy ! Component: 1150 - total flux cleaned = 0.000702977 Jy ! Component: 1200 - total flux cleaned = 0.000702983 Jy ! Component: 1250 - total flux cleaned = 0.000623729 Jy ! Component: 1300 - total flux cleaned = 0.000639474 Jy ! Component: 1350 - total flux cleaned = 0.000639626 Jy ! Component: 1400 - total flux cleaned = 0.000608704 Jy ! Component: 1450 - total flux cleaned = 0.000608866 Jy ! Component: 1500 - total flux cleaned = 0.000593645 Jy ! Component: 1550 - total flux cleaned = 0.000563612 Jy ! Component: 1600 - total flux cleaned = 0.000519197 Jy ! Component: 1650 - total flux cleaned = 0.000489667 Jy ! Component: 1700 - total flux cleaned = 0.000518881 Jy ! Component: 1750 - total flux cleaned = 0.000417219 Jy ! Component: 1800 - total flux cleaned = 0.000474948 Jy ! Component: 1850 - total flux cleaned = 0.000474972 Jy ! Component: 1900 - total flux cleaned = 0.000375498 Jy ! Component: 1950 - total flux cleaned = 0.000403767 Jy ! Component: 2000 - total flux cleaned = 0.000403784 Jy ! Component: 2050 - total flux cleaned = 0.000389928 Jy ! Component: 2100 - total flux cleaned = 0.000376213 Jy ! Component: 2150 - total flux cleaned = 0.000362439 Jy ! Component: 2200 - total flux cleaned = 0.000375995 Jy ! Component: 2250 - total flux cleaned = 0.000294782 Jy ! Component: 2300 - total flux cleaned = 0.000308195 Jy ! Component: 2350 - total flux cleaned = 0.000348268 Jy ! Component: 2400 - total flux cleaned = 0.000308356 Jy ! Component: 2450 - total flux cleaned = 0.000374172 Jy ! Component: 2500 - total flux cleaned = 0.000374262 Jy ! Component: 2550 - total flux cleaned = 0.000296141 Jy ! Component: 2600 - total flux cleaned = 0.000347936 Jy ! Component: 2650 - total flux cleaned = 0.000283436 Jy ! Component: 2700 - total flux cleaned = 0.000309038 Jy ! Component: 2750 - total flux cleaned = 0.000296326 Jy ! Component: 2800 - total flux cleaned = 0.000283837 Jy ! Component: 2850 - total flux cleaned = 0.000208356 Jy ! Component: 2900 - total flux cleaned = 0.000233428 Jy ! Component: 2950 - total flux cleaned = 0.000171194 Jy ! Component: 3000 - total flux cleaned = 0.00017118 Jy ! Component: 3050 - total flux cleaned = 0.00013419 Jy ! Component: 3100 - total flux cleaned = 0.000109631 Jy ! Component: 3150 - total flux cleaned = 2.42996e-05 Jy ! Component: 3200 - total flux cleaned = 4.84229e-05 Jy ! Component: 3250 - total flux cleaned = 4.83415e-05 Jy ! Component: 3300 - total flux cleaned = 3.62418e-05 Jy ! Component: 3350 - total flux cleaned = 4.56547e-07 Jy ! Component: 3400 - total flux cleaned = -4.70481e-05 Jy ! Component: 3450 - total flux cleaned = -4.7087e-05 Jy ! Component: 3500 - total flux cleaned = -7.0595e-05 Jy ! Component: 3550 - total flux cleaned = -4.73449e-05 Jy ! Component: 3600 - total flux cleaned = -5.91133e-05 Jy ! Component: 3650 - total flux cleaned = -0.000128594 Jy ! Component: 3700 - total flux cleaned = -0.000128669 Jy ! Component: 3750 - total flux cleaned = -0.000128712 Jy ! Component: 3800 - total flux cleaned = -0.000174285 Jy ! Component: 3850 - total flux cleaned = -0.000242418 Jy ! Component: 3900 - total flux cleaned = -0.000208424 Jy ! Component: 3950 - total flux cleaned = -0.000230963 Jy ! Component: 4000 - total flux cleaned = -0.000298195 Jy ! Component: 4050 - total flux cleaned = -0.000275875 Jy ! Total flux subtracted in 4096 components = -0.000264813 Jy ! Clean residual min=-0.000613 max=0.000655 Jy/beam ! Clean residual mean=-0.000002 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.456857 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 596 components and 0.456857 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1845+3541_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9336 x 1.476 at 0.1391 degrees (North through East) ! Clean map min=-0.0010794 max=0.12961 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1845+3541_X_map.fits wmodel /vlbi/uf001/uva//J1845+3541_X_map.mod ! Writing 596 model components to file: /vlbi/uf001/uva//J1845+3541_X_map.mod wobs /vlbi/uf001/uva//J1845+3541_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1845+3541_X_uvs.fits wwins /vlbi/uf001/uva//J1845+3541_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J1845+3541_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.129613 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000188496 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.436289 0.436289 0.872578 1.74516 3.49031 6.98063 13.9613 27.9225 55.845 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.129 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 687.617 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1845+3541_X_dfm.log closed on Mon Jan 14 04:46:57 2019