! Started logfile: /vlbi/uf001/uva//J1845+3541_S_dfm.log on Mon Jan 14 04:46:45 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1845+3541_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1845+3541_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.784656 visibilities/baseline/integration-bin.
! Found source: J1845+3541
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4449 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1845+3541_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.284587Jy  sigma=19.632453
! Fit after  self-cal, rms=0.402667Jy  sigma=7.465477
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.859 mas, bmaj=4.784 mas, bpa=-7.638 degrees
! Estimated noise=0.892256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.51651 Jy
! Component: 100  -  total flux cleaned = 0.715705 Jy
! Total flux subtracted in 100 components = 0.715705 Jy
! Clean residual min=-0.035914 max=0.103063 Jy/beam
! Clean residual mean=0.000067 rms=0.011377 Jy/beam
! Combined flux in latest and established models = 0.715705 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.715705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.242798Jy  sigma=3.318496
! Fit after  self-cal, rms=0.242280Jy  sigma=3.313058
! Inverting map 
! Added new window around map position (-5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113005 Jy
! Component: 100  -  total flux cleaned = 0.186469 Jy
! Total flux subtracted in 100 components = 0.186469 Jy
! Clean residual min=-0.022040 max=0.039905 Jy/beam
! Clean residual mean=0.000038 rms=0.006682 Jy/beam
! Combined flux in latest and established models = 0.902174 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.902174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.151203Jy  sigma=2.114037
! Fit after  self-cal, rms=0.148692Jy  sigma=2.064204
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0547837 Jy
! Component: 100  -  total flux cleaned = 0.0925061 Jy
! Total flux subtracted in 100 components = 0.0925061 Jy
! Clean residual min=-0.016261 max=0.022917 Jy/beam
! Clean residual mean=0.000028 rms=0.004627 Jy/beam
! Combined flux in latest and established models = 0.99468 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.99468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114012Jy  sigma=1.631420
! Fit after  self-cal, rms=0.113114Jy  sigma=1.613829
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.306 mas, bmaj=5.348 mas, bpa=-7.357 degrees
! Estimated noise=0.740234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385156 Jy
! Component: 100  -  total flux cleaned = 0.0656051 Jy
! Component: 150  -  total flux cleaned = 0.0859169 Jy
! Component: 200  -  total flux cleaned = 0.101358 Jy
! Total flux subtracted in 200 components = 0.101358 Jy
! Clean residual min=-0.014289 max=0.019341 Jy/beam
! Clean residual mean=-0.000009 rms=0.003544 Jy/beam
! Combined flux in latest and established models = 1.09604 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 88 components and 1.09604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089839Jy  sigma=1.345254
! Fit after  self-cal, rms=0.088993Jy  sigma=1.331823
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.306 x 5.348 at -7.357 degrees (North through East)
! Clean map  min=-0.013361  max=0.65274 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.02     KP        0.97     
!   LA        0.94     MK        1.00     NL        1.05     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.00     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.08     OV        1.05     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.00     KP        0.99     
!   LA        0.95     MK        1.01     NL        1.08     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.088993Jy  sigma=1.331823
! Fit after  self-cal, rms=0.071799Jy  sigma=1.111280
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=5.386 mas, bpa=-7.638 degrees
! Estimated noise=0.737393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161243 Jy
! Component: 100  -  total flux cleaned = -0.000624683 Jy
! Component: 150  -  total flux cleaned = -0.000919988 Jy
! Component: 200  -  total flux cleaned = -0.00117706 Jy
! Total flux subtracted in 200 components = -0.00117706 Jy
! Clean residual min=-0.008149 max=0.007445 Jy/beam
! Clean residual mean=-0.000002 rms=0.001951 Jy/beam
! Combined flux in latest and established models = 1.09486 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 99 components and 1.09486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071476Jy  sigma=1.105647
! Fit after  self-cal, rms=0.071454Jy  sigma=1.104815
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071454Jy  sigma=1.104815
! Fit after  self-cal, rms=0.065409Jy  sigma=1.004856
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.322 mas, bmaj=5.367 mas, bpa=-7.619 degrees
! Estimated noise=0.737285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112693 Jy
! Component: 100  -  total flux cleaned = -0.000481216 Jy
! Component: 150  -  total flux cleaned = 4.03136e-05 Jy
! Component: 200  -  total flux cleaned = 0.000399082 Jy
! Total flux subtracted in 200 components = 0.000399082 Jy
! Clean residual min=-0.004900 max=0.004805 Jy/beam
! Clean residual mean=0.000001 rms=0.001065 Jy/beam
! Combined flux in latest and established models = 1.09526 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 107 components and 1.09526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064972Jy  sigma=0.997532
! Fit after  self-cal, rms=0.064961Jy  sigma=0.996478
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.06747e-05 Jy
! Component: 100  -  total flux cleaned = 9.01739e-05 Jy
! Component: 150  -  total flux cleaned = 1.53759e-05 Jy
! Component: 200  -  total flux cleaned = 7.79201e-05 Jy
! Total flux subtracted in 200 components = 7.79201e-05 Jy
! Clean residual min=-0.004612 max=0.004359 Jy/beam
! Clean residual mean=0.000001 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 1.09534 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 1.09534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064773Jy  sigma=0.993186
! Fit after  self-cal, rms=0.064750Jy  sigma=0.992514
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064750Jy  sigma=0.992514
! Fit after  self-cal, rms=0.064831Jy  sigma=0.991381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.361 mas, bpa=-7.607 degrees
! Estimated noise=0.738132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000735452 Jy
! Component: 100  -  total flux cleaned = 0.00116611 Jy
! Component: 150  -  total flux cleaned = 0.00124034 Jy
! Component: 200  -  total flux cleaned = 0.00130691 Jy
! Total flux subtracted in 200 components = 0.00130691 Jy
! Clean residual min=-0.004306 max=0.003929 Jy/beam
! Clean residual mean=0.000001 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 1.09665 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 112 components and 1.09665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064637Jy  sigma=0.988254
! Fit after  self-cal, rms=0.064626Jy  sigma=0.987798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.97968e-05 Jy
! Component: 100  -  total flux cleaned = 7.98972e-05 Jy
! Component: 150  -  total flux cleaned = 0.000139175 Jy
! Component: 200  -  total flux cleaned = 0.000190564 Jy
! Total flux subtracted in 200 components = 0.000190564 Jy
! Clean residual min=-0.004150 max=0.003607 Jy/beam
! Clean residual mean=0.000002 rms=0.000925 Jy/beam
! Combined flux in latest and established models = 1.09684 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 114 components and 1.09684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064514Jy  sigma=0.985814
! Fit after  self-cal, rms=0.064501Jy  sigma=0.985457
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064501Jy  sigma=0.985457
! Fit after  self-cal, rms=0.064575Jy  sigma=0.985031
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.403 mas, bmaj=8.669 mas, bpa=-12.11 degrees
! Estimated noise=1.02049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221068 Jy
! Component: 100  -  total flux cleaned = 0.00258921 Jy
! Component: 150  -  total flux cleaned = 0.00278719 Jy
! Component: 200  -  total flux cleaned = 0.0028286 Jy
! Total flux subtracted in 200 components = 0.0028286 Jy
! Clean residual min=-0.003381 max=0.003030 Jy/beam
! Clean residual mean=0.000005 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 1.09966 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 118 components and 1.09966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064528Jy  sigma=0.985048
! Fit after  self-cal, rms=0.064488Jy  sigma=0.984322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272599 Jy
! Component: 100  -  total flux cleaned = -6.17411e-05 Jy
! Component: 150  -  total flux cleaned = -9.71084e-05 Jy
! Component: 200  -  total flux cleaned = -6.62296e-05 Jy
! Total flux subtracted in 200 components = -6.62296e-05 Jy
! Clean residual min=-0.003266 max=0.002847 Jy/beam
! Clean residual mean=0.000006 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 1.0996 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 122 components and 1.0996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064496Jy  sigma=0.984821
! Fit after  self-cal, rms=0.064470Jy  sigma=0.984322
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.355 mas, bpa=-7.633 degrees
! Estimated noise=0.738736 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 5.355 at -7.633 degrees (North through East)
! Clean map  min=-0.0038895  max=0.64656 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064470Jy  sigma=0.984322
! Fit after  self-cal, rms=0.059377Jy  sigma=0.896442
! Inverting map and beam 
! Estimated beam: bmin=3.32 mas, bmaj=5.36 mas, bpa=-7.658 degrees
! Estimated noise=0.739766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000864304 Jy
! Component: 100  -  total flux cleaned = 0.00112328 Jy
! Component: 150  -  total flux cleaned = 0.00106863 Jy
! Component: 200  -  total flux cleaned = 0.00107033 Jy
! Total flux subtracted in 200 components = 0.00107033 Jy
! Clean residual min=-0.003657 max=0.003547 Jy/beam
! Clean residual mean=0.000001 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 1.10067 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 129 components and 1.10067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059260Jy  sigma=0.894474
! Fit after  self-cal, rms=0.059255Jy  sigma=0.894288
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112263 Jy
! Component: 100  -  total flux cleaned = -0.000165936 Jy
! Component: 150  -  total flux cleaned = -0.000164834 Jy
! Component: 200  -  total flux cleaned = -0.000120154 Jy
! Total flux subtracted in 200 components = -0.000120154 Jy
! Clean residual min=-0.003557 max=0.003421 Jy/beam
! Clean residual mean=0.000001 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 1.10055 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 131 components and 1.10055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059192Jy  sigma=0.892992
! Fit after  self-cal, rms=0.059188Jy  sigma=0.892838
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059188Jy  sigma=0.892838
! Fit after  self-cal, rms=0.059244Jy  sigma=0.892585
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=4.791 mas, bpa=-8.115 degrees
! Estimated noise=0.890846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.513434 Jy
! Component: 100  -  total flux cleaned = 0.717904 Jy
! Component: 150  -  total flux cleaned = 0.836007 Jy
! Component: 200  -  total flux cleaned = 0.910801 Jy
! Total flux subtracted in 200 components = 0.910801 Jy
! Clean residual min=-0.014485 max=0.039786 Jy/beam
! Clean residual mean=0.000030 rms=0.004882 Jy/beam
! Combined flux in latest and established models = 0.910801 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.910801 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.355 mas, bpa=-7.682 degrees
! Estimated noise=0.740103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0598992 Jy
! Component: 100  -  total flux cleaned = 0.0977038 Jy
! Component: 150  -  total flux cleaned = 0.123045 Jy
! Component: 200  -  total flux cleaned = 0.1404 Jy
! Total flux subtracted in 200 components = 0.1404 Jy
! Clean residual min=-0.005491 max=0.012228 Jy/beam
! Clean residual mean=-0.000000 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 1.0512 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 58 components and 1.0512 Jy
! Inverting map 
! Added new window around map position (3.5, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130896 Jy
! Component: 100  -  total flux cleaned = 0.0223976 Jy
! Component: 150  -  total flux cleaned = 0.0293182 Jy
! Component: 200  -  total flux cleaned = 0.0345872 Jy
! Total flux subtracted in 200 components = 0.0345872 Jy
! Clean residual min=-0.004229 max=0.004334 Jy/beam
! Clean residual mean=0.000001 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 1.08579 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 90 components and 1.08579 Jy
! Inverting map 
! Added new window around map position (-49, 92.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450759 Jy
! Component: 100  -  total flux cleaned = 0.00794261 Jy
! Component: 150  -  total flux cleaned = 0.0107452 Jy
! Component: 200  -  total flux cleaned = 0.0128934 Jy
! Total flux subtracted in 200 components = 0.0128934 Jy
! Clean residual min=-0.003587 max=0.003334 Jy/beam
! Clean residual mean=0.000002 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 1.09868 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 111 components and 1.09868 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.405 mas, bmaj=8.662 mas, bpa=-12.31 degrees
! Estimated noise=1.02254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281217 Jy
! Component: 100  -  total flux cleaned = 0.00350882 Jy
! Component: 150  -  total flux cleaned = 0.00383062 Jy
! Component: 200  -  total flux cleaned = 0.00413253 Jy
! Total flux subtracted in 200 components = 0.00413253 Jy
! Clean residual min=-0.002707 max=0.002461 Jy/beam
! Clean residual mean=0.000005 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 1.10281 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146756 Jy
! Component: 100  -  total flux cleaned = 0.000243357 Jy
! Component: 150  -  total flux cleaned = 0.000271354 Jy
! Component: 200  -  total flux cleaned = 0.000298088 Jy
! Total flux subtracted in 200 components = 0.000298088 Jy
! Clean residual min=-0.002559 max=0.002379 Jy/beam
! Clean residual mean=0.000004 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 1.10311 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 153 components and 1.10311 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.355 mas, bpa=-7.682 degrees
! Estimated noise=0.740103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000394473 Jy
! Component: 100  -  total flux cleaned = -0.000395323 Jy
! Component: 150  -  total flux cleaned = -0.000451291 Jy
! Component: 200  -  total flux cleaned = -0.000449433 Jy
! Total flux subtracted in 200 components = -0.000449433 Jy
! Clean residual min=-0.003004 max=0.003031 Jy/beam
! Clean residual mean=0.000002 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 1.10266 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 171 components and 1.10266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058790Jy  sigma=0.884176
! Fit after  self-cal, rms=0.058747Jy  sigma=0.883375
wmodel J1845+3541_S_map.mod
! Writing 171 model components to file: J1845+3541_S_map.mod
wobs   J1845+3541_S_uvs.fits
! Writing UV FITS file: J1845+3541_S_uvs.fits
wwins  J1845+3541_S_map.win
! wwins: Wrote 4 windows to J1845+3541_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.03536e-05 Jy
! Component: 100  -  total flux cleaned = -0.000334949 Jy
! Component: 150  -  total flux cleaned = -0.000806697 Jy
! Component: 200  -  total flux cleaned = -0.00112354 Jy
! Component: 250  -  total flux cleaned = -0.00116738 Jy
! Component: 300  -  total flux cleaned = -0.00121 Jy
! Component: 350  -  total flux cleaned = -0.001168 Jy
! Component: 400  -  total flux cleaned = -0.00108771 Jy
! Component: 450  -  total flux cleaned = -0.00108938 Jy
! Component: 500  -  total flux cleaned = -0.00116748 Jy
! Component: 550  -  total flux cleaned = -0.00124388 Jy
! Component: 600  -  total flux cleaned = -0.00139197 Jy
! Component: 650  -  total flux cleaned = -0.00146498 Jy
! Component: 700  -  total flux cleaned = -0.00164209 Jy
! Component: 750  -  total flux cleaned = -0.00167683 Jy
! Component: 800  -  total flux cleaned = -0.00181339 Jy
! Component: 850  -  total flux cleaned = -0.00191447 Jy
! Component: 900  -  total flux cleaned = -0.00204592 Jy
! Component: 950  -  total flux cleaned = -0.0021424 Jy
! Component: 1000  -  total flux cleaned = -0.0022384 Jy
! Component: 1050  -  total flux cleaned = -0.00236311 Jy
! Component: 1100  -  total flux cleaned = -0.00239342 Jy
! Component: 1150  -  total flux cleaned = -0.00251471 Jy
! Component: 1200  -  total flux cleaned = -0.00257453 Jy
! Component: 1250  -  total flux cleaned = -0.00260365 Jy
! Component: 1300  -  total flux cleaned = -0.0026907 Jy
! Component: 1350  -  total flux cleaned = -0.00280551 Jy
! Component: 1400  -  total flux cleaned = -0.00277673 Jy
! Component: 1450  -  total flux cleaned = -0.00297242 Jy
! Component: 1500  -  total flux cleaned = -0.00291709 Jy
! Component: 1550  -  total flux cleaned = -0.00299891 Jy
! Component: 1600  -  total flux cleaned = -0.00305291 Jy
! Component: 1650  -  total flux cleaned = -0.00321192 Jy
! Component: 1700  -  total flux cleaned = -0.00329049 Jy
! Component: 1750  -  total flux cleaned = -0.00334164 Jy
! Component: 1800  -  total flux cleaned = -0.00339271 Jy
! Component: 1850  -  total flux cleaned = -0.00349424 Jy
! Component: 1900  -  total flux cleaned = -0.00351931 Jy
! Component: 1950  -  total flux cleaned = -0.00366799 Jy
! Component: 2000  -  total flux cleaned = -0.00379049 Jy
! Component: 2050  -  total flux cleaned = -0.00381459 Jy
! Component: 2100  -  total flux cleaned = -0.00400677 Jy
! Component: 2150  -  total flux cleaned = -0.00403073 Jy
! Component: 2200  -  total flux cleaned = -0.00417169 Jy
! Component: 2250  -  total flux cleaned = -0.00421799 Jy
! Component: 2300  -  total flux cleaned = -0.00431008 Jy
! Component: 2350  -  total flux cleaned = -0.00449226 Jy
! Component: 2400  -  total flux cleaned = -0.00458202 Jy
! Component: 2450  -  total flux cleaned = -0.00460414 Jy
! Component: 2500  -  total flux cleaned = -0.00471463 Jy
! Component: 2550  -  total flux cleaned = -0.00484548 Jy
! Component: 2600  -  total flux cleaned = -0.00486733 Jy
! Component: 2650  -  total flux cleaned = -0.00512397 Jy
! Component: 2700  -  total flux cleaned = -0.00512371 Jy
! Component: 2750  -  total flux cleaned = -0.00533376 Jy
! Component: 2800  -  total flux cleaned = -0.00539589 Jy
! Component: 2850  -  total flux cleaned = -0.005437 Jy
! Component: 2900  -  total flux cleaned = -0.00549813 Jy
! Component: 2950  -  total flux cleaned = -0.00553848 Jy
! Component: 3000  -  total flux cleaned = -0.00567863 Jy
! Component: 3050  -  total flux cleaned = -0.00567853 Jy
! Component: 3100  -  total flux cleaned = -0.00577683 Jy
! Component: 3150  -  total flux cleaned = -0.00585473 Jy
! Component: 3200  -  total flux cleaned = -0.00587412 Jy
! Component: 3250  -  total flux cleaned = -0.00591237 Jy
! Component: 3300  -  total flux cleaned = -0.00595054 Jy
! Component: 3350  -  total flux cleaned = -0.00598841 Jy
! Component: 3400  -  total flux cleaned = -0.00615667 Jy
! Component: 3450  -  total flux cleaned = -0.00608233 Jy
! Component: 3500  -  total flux cleaned = -0.00615595 Jy
! Component: 3550  -  total flux cleaned = -0.00615606 Jy
! Component: 3600  -  total flux cleaned = -0.00615588 Jy
! Component: 3650  -  total flux cleaned = -0.00615604 Jy
! Component: 3700  -  total flux cleaned = -0.00619158 Jy
! Component: 3750  -  total flux cleaned = -0.00619162 Jy
! Component: 3800  -  total flux cleaned = -0.00613895 Jy
! Component: 3850  -  total flux cleaned = -0.00622622 Jy
! Component: 3900  -  total flux cleaned = -0.00622611 Jy
! Component: 3950  -  total flux cleaned = -0.0061747 Jy
! Component: 4000  -  total flux cleaned = -0.00615766 Jy
! Component: 4050  -  total flux cleaned = -0.00615775 Jy
! Total flux subtracted in 4096 components = -0.00617453 Jy
! Clean residual min=-0.000862 max=0.001110 Jy/beam
! Clean residual mean=0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 1.09649 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 465 components and 1.09649 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1845+3541_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 5.355 at -7.682 degrees (North through East)
! Clean map  min=-0.0021791  max=0.64941 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1845+3541_S_map.fits
wmodel /vlbi/uf001/uva//J1845+3541_S_map.mod
! Writing 465 model components to file: /vlbi/uf001/uva//J1845+3541_S_map.mod
wobs   /vlbi/uf001/uva//J1845+3541_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1845+3541_S_uvs.fits
wwins  /vlbi/uf001/uva//J1845+3541_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1845+3541_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.649405 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00030455 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.14069 0.14069 0.281381 0.562761 1.12552 2.25104 4.50209 9.00418 18.0084 36.0167 72.0334
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.649 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2132.34 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1845+3541_S_dfm.log closed on Mon Jan 14 04:46:50 2019