! Started logfile: /vlbi/uf001/uva//J1844-2029_S_dfm.log on Mon Jan 14 04:46:33 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1844-2029_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1844-2029_S_uva.fits
! AN table 1: 74 integrations on 28 of 28 possible baselines.
! AN table 2: 37 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.876245 visibilities/baseline/integration-bin.
! Found source: J1844-2029
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1844-2029_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.008914Jy  sigma=16.843956
! Fit after  self-cal, rms=0.926128Jy  sigma=15.404359
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.373 mas, bmaj=20.85 mas, bpa=-0.5363 degrees
! Estimated noise=1.08427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0600052 Jy
! Component: 100  -  total flux cleaned = 0.0807444 Jy
! Total flux subtracted in 100 components = 0.0807444 Jy
! Clean residual min=-0.008834 max=0.014438 Jy/beam
! Clean residual mean=-0.000109 rms=0.003314 Jy/beam
! Combined flux in latest and established models = 0.0807444 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0807444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083743Jy  sigma=1.257746
! Fit after  self-cal, rms=0.083271Jy  sigma=1.247375
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.054 mas, bmaj=21.65 mas, bpa=-1.652 degrees
! Estimated noise=0.600603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164444 Jy
! Component: 100  -  total flux cleaned = 0.0265246 Jy
! Component: 150  -  total flux cleaned = 0.0336051 Jy
! Component: 200  -  total flux cleaned = 0.038951 Jy
! Total flux subtracted in 200 components = 0.038951 Jy
! Clean residual min=-0.005017 max=0.005908 Jy/beam
! Clean residual mean=-0.000046 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.119695 Jy
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 116 components and 0.119695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079727Jy  sigma=1.172504
! Fit after  self-cal, rms=0.079157Jy  sigma=1.164283
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.054 x 21.65 at -1.652 degrees (North through East)
! Clean map  min=-0.0045827  max=0.076932 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.91     HN        1.07     KP        1.02     
!   LA        0.96     NL        1.06     OV        0.99     PT        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.92     HN        1.03     KP        0.95     
!   LA        0.97     NL        1.19     OV        0.91     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.91     HN        1.07     KP        1.03     
!   LA        0.91     NL        1.07     OV        1.01     PT        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.079157Jy  sigma=1.164283
! Fit after  self-cal, rms=0.080292Jy  sigma=1.153866
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.282 mas, bmaj=22.02 mas, bpa=-1.377 degrees
! Estimated noise=0.582465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569776 Jy
! Component: 100  -  total flux cleaned = 0.00870974 Jy
! Component: 150  -  total flux cleaned = 0.0104088 Jy
! Component: 200  -  total flux cleaned = 0.011267 Jy
! Total flux subtracted in 200 components = 0.011267 Jy
! Clean residual min=-0.002930 max=0.003288 Jy/beam
! Clean residual mean=-0.000013 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.130962 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 198 components and 0.130962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079898Jy  sigma=1.144658
! Fit after  self-cal, rms=0.079987Jy  sigma=1.142474
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079987Jy  sigma=1.142474
! Fit after  self-cal, rms=0.079070Jy  sigma=1.139554
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.372 mas, bmaj=22.1 mas, bpa=-1.73 degrees
! Estimated noise=0.58946 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208611 Jy
! Component: 100  -  total flux cleaned = 0.00317623 Jy
! Component: 150  -  total flux cleaned = 0.00330341 Jy
! Component: 200  -  total flux cleaned = 0.00334116 Jy
! Total flux subtracted in 200 components = 0.00334116 Jy
! Clean residual min=-0.001996 max=0.002429 Jy/beam
! Clean residual mean=-0.000004 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.134304 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 247 components and 0.134304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078997Jy  sigma=1.138270
! Fit after  self-cal, rms=0.078984Jy  sigma=1.137899
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000801291 Jy
! Component: 100  -  total flux cleaned = 0.00101062 Jy
! Component: 150  -  total flux cleaned = 0.00107243 Jy
! Component: 200  -  total flux cleaned = 0.00109906 Jy
! Total flux subtracted in 200 components = 0.00109906 Jy
! Clean residual min=-0.001952 max=0.002313 Jy/beam
! Clean residual mean=-0.000004 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.135403 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 280 components and 0.135403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078950Jy  sigma=1.137450
! Fit after  self-cal, rms=0.078948Jy  sigma=1.137376
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078948Jy  sigma=1.137376
! Fit after  self-cal, rms=0.079123Jy  sigma=1.137237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.397 mas, bmaj=22.08 mas, bpa=-1.761 degrees
! Estimated noise=0.590798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960734 Jy
! Component: 100  -  total flux cleaned = 0.00120032 Jy
! Component: 150  -  total flux cleaned = 0.00138106 Jy
! Component: 200  -  total flux cleaned = 0.00140562 Jy
! Total flux subtracted in 200 components = 0.00140562 Jy
! Clean residual min=-0.001970 max=0.002291 Jy/beam
! Clean residual mean=-0.000005 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.136808 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 293 components and 0.136808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079098Jy  sigma=1.136900
! Fit after  self-cal, rms=0.079090Jy  sigma=1.136843
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404224 Jy
! Component: 100  -  total flux cleaned = 0.000450855 Jy
! Component: 150  -  total flux cleaned = 0.000430171 Jy
! Component: 200  -  total flux cleaned = 0.000410297 Jy
! Total flux subtracted in 200 components = 0.000410297 Jy
! Clean residual min=-0.001948 max=0.002257 Jy/beam
! Clean residual mean=-0.000005 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.137218 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 306 components and 0.137218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079075Jy  sigma=1.136677
! Fit after  self-cal, rms=0.079074Jy  sigma=1.136657
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079074Jy  sigma=1.136657
! Fit after  self-cal, rms=0.079128Jy  sigma=1.136611
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.599 mas, bmaj=23.11 mas, bpa=-2.43 degrees
! Estimated noise=0.598676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000398584 Jy
! Component: 100  -  total flux cleaned = 0.000435458 Jy
! Component: 150  -  total flux cleaned = 0.00053877 Jy
! Component: 200  -  total flux cleaned = 0.000634325 Jy
! Total flux subtracted in 200 components = 0.000634325 Jy
! Clean residual min=-0.001942 max=0.002008 Jy/beam
! Clean residual mean=-0.000007 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.137853 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 330 components and 0.137853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079123Jy  sigma=1.136504
! Fit after  self-cal, rms=0.079121Jy  sigma=1.136489
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158975 Jy
! Component: 100  -  total flux cleaned = 0.00025066 Jy
! Component: 150  -  total flux cleaned = 0.000334131 Jy
! Component: 200  -  total flux cleaned = 0.000386355 Jy
! Total flux subtracted in 200 components = 0.000386355 Jy
! Clean residual min=-0.001945 max=0.001976 Jy/beam
! Clean residual mean=-0.000006 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.138239 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 345 components and 0.138239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079117Jy  sigma=1.136431
! Fit after  self-cal, rms=0.079118Jy  sigma=1.136424
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=22.07 mas, bpa=-1.765 degrees
! Estimated noise=0.591582 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.409 x 22.07 at -1.765 degrees (North through East)
! Clean map  min=-0.0019808  max=0.074916 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.697 mas, bmaj=21.18 mas, bpa=-0.5428 degrees
! Estimated noise=1.06954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0586198 Jy
! Component: 100  -  total flux cleaned = 0.0819914 Jy
! Component: 150  -  total flux cleaned = 0.0964326 Jy
! Component: 200  -  total flux cleaned = 0.106204 Jy
! Total flux subtracted in 200 components = 0.106204 Jy
! Clean residual min=-0.005920 max=0.006698 Jy/beam
! Clean residual mean=-0.000055 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 0.106204 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.106204 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=22.07 mas, bpa=-1.765 degrees
! Estimated noise=0.591582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00802872 Jy
! Component: 100  -  total flux cleaned = 0.0133829 Jy
! Component: 150  -  total flux cleaned = 0.0172723 Jy
! Component: 200  -  total flux cleaned = 0.0203261 Jy
! Total flux subtracted in 200 components = 0.0203261 Jy
! Clean residual min=-0.002861 max=0.002866 Jy/beam
! Clean residual mean=-0.000019 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.12653 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 125 components and 0.12653 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.599 mas, bmaj=23.11 mas, bpa=-2.43 degrees
! Estimated noise=0.598676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282078 Jy
! Component: 100  -  total flux cleaned = 0.00496804 Jy
! Component: 150  -  total flux cleaned = 0.00666433 Jy
! Component: 200  -  total flux cleaned = 0.00786757 Jy
! Total flux subtracted in 200 components = 0.00786757 Jy
! Clean residual min=-0.002182 max=0.002288 Jy/beam
! Clean residual mean=-0.000012 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.134398 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000856588 Jy
! Component: 100  -  total flux cleaned = 0.0016185 Jy
! Component: 150  -  total flux cleaned = 0.0021722 Jy
! Component: 200  -  total flux cleaned = 0.00259449 Jy
! Total flux subtracted in 200 components = 0.00259449 Jy
! Clean residual min=-0.002102 max=0.002286 Jy/beam
! Clean residual mean=-0.000005 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.136992 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 220 components and 0.136992 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=22.07 mas, bpa=-1.765 degrees
! Estimated noise=0.591582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.96128e-05 Jy
! Component: 100  -  total flux cleaned = 0.000161222 Jy
! Component: 150  -  total flux cleaned = 0.000273769 Jy
! Component: 200  -  total flux cleaned = 0.000404108 Jy
! Total flux subtracted in 200 components = 0.000404108 Jy
! Clean residual min=-0.002087 max=0.002444 Jy/beam
! Clean residual mean=-0.000007 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.137396 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 247 components and 0.137396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079165Jy  sigma=1.137139
! Fit after  self-cal, rms=0.079143Jy  sigma=1.136977
wmodel J1844-2029_S_map.mod
! Writing 247 model components to file: J1844-2029_S_map.mod
wobs   J1844-2029_S_uvs.fits
! Writing UV FITS file: J1844-2029_S_uvs.fits
wwins  J1844-2029_S_map.win
! wwins: Wrote 2 windows to J1844-2029_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000711878 Jy
! Component: 100  -  total flux cleaned = 0.000501201 Jy
! Component: 150  -  total flux cleaned = 0.00037103 Jy
! Component: 200  -  total flux cleaned = 0.000279753 Jy
! Component: 250  -  total flux cleaned = 0.000279967 Jy
! Component: 300  -  total flux cleaned = 0.000199155 Jy
! Component: 350  -  total flux cleaned = 0.000252506 Jy
! Component: 400  -  total flux cleaned = 0.00030201 Jy
! Component: 450  -  total flux cleaned = 0.000468732 Jy
! Component: 500  -  total flux cleaned = 0.000560796 Jy
! Component: 550  -  total flux cleaned = 0.000716619 Jy
! Component: 600  -  total flux cleaned = 0.000846665 Jy
! Component: 650  -  total flux cleaned = 0.00101497 Jy
! Component: 700  -  total flux cleaned = 0.00111754 Jy
! Component: 750  -  total flux cleaned = 0.00121794 Jy
! Component: 800  -  total flux cleaned = 0.00135455 Jy
! Component: 850  -  total flux cleaned = 0.00144986 Jy
! Component: 900  -  total flux cleaned = 0.00154294 Jy
! Component: 950  -  total flux cleaned = 0.00167027 Jy
! Component: 1000  -  total flux cleaned = 0.00172367 Jy
! Component: 1050  -  total flux cleaned = 0.00182795 Jy
! Component: 1100  -  total flux cleaned = 0.00187905 Jy
! Component: 1150  -  total flux cleaned = 0.00196217 Jy
! Component: 1200  -  total flux cleaned = 0.00209193 Jy
! Component: 1250  -  total flux cleaned = 0.00218721 Jy
! Component: 1300  -  total flux cleaned = 0.00229604 Jy
! Component: 1350  -  total flux cleaned = 0.00238752 Jy
! Component: 1400  -  total flux cleaned = 0.00249206 Jy
! Component: 1450  -  total flux cleaned = 0.00259486 Jy
! Component: 1500  -  total flux cleaned = 0.00273935 Jy
! Component: 1550  -  total flux cleaned = 0.00283871 Jy
! Component: 1600  -  total flux cleaned = 0.00296419 Jy
! Component: 1650  -  total flux cleaned = 0.00304672 Jy
! Component: 1700  -  total flux cleaned = 0.00315483 Jy
! Component: 1750  -  total flux cleaned = 0.0032747 Jy
! Component: 1800  -  total flux cleaned = 0.00340542 Jy
! Component: 1850  -  total flux cleaned = 0.00352115 Jy
! Component: 1900  -  total flux cleaned = 0.00367324 Jy
! Component: 1950  -  total flux cleaned = 0.00377323 Jy
! Component: 2000  -  total flux cleaned = 0.00392067 Jy
! Component: 2050  -  total flux cleaned = 0.00402971 Jy
! Component: 2100  -  total flux cleaned = 0.00412512 Jy
! Component: 2150  -  total flux cleaned = 0.00420779 Jy
! Component: 2200  -  total flux cleaned = 0.00428942 Jy
! Component: 2250  -  total flux cleaned = 0.00438127 Jy
! Component: 2300  -  total flux cleaned = 0.00443813 Jy
! Component: 2350  -  total flux cleaned = 0.00449429 Jy
! Component: 2400  -  total flux cleaned = 0.00454959 Jy
! Component: 2450  -  total flux cleaned = 0.0046043 Jy
! Component: 2500  -  total flux cleaned = 0.00463661 Jy
! Component: 2550  -  total flux cleaned = 0.00465796 Jy
! Component: 2600  -  total flux cleaned = 0.00470041 Jy
! Component: 2650  -  total flux cleaned = 0.00472143 Jy
! Component: 2700  -  total flux cleaned = 0.00474221 Jy
! Component: 2750  -  total flux cleaned = 0.00480369 Jy
! Component: 2800  -  total flux cleaned = 0.00485431 Jy
! Component: 2850  -  total flux cleaned = 0.00486424 Jy
! Component: 2900  -  total flux cleaned = 0.00490403 Jy
! Component: 2950  -  total flux cleaned = 0.00490403 Jy
! Component: 3000  -  total flux cleaned = 0.00493316 Jy
! Component: 3050  -  total flux cleaned = 0.00494286 Jy
! Component: 3100  -  total flux cleaned = 0.00495249 Jy
! Component: 3150  -  total flux cleaned = 0.0049808 Jy
! Component: 3200  -  total flux cleaned = 0.00499942 Jy
! Component: 3250  -  total flux cleaned = 0.00501789 Jy
! Component: 3300  -  total flux cleaned = 0.00500867 Jy
! Component: 3350  -  total flux cleaned = 0.00497233 Jy
! Component: 3400  -  total flux cleaned = 0.00495435 Jy
! Component: 3450  -  total flux cleaned = 0.00495441 Jy
! Component: 3500  -  total flux cleaned = 0.00491887 Jy
! Component: 3550  -  total flux cleaned = 0.00490141 Jy
! Component: 3600  -  total flux cleaned = 0.00487527 Jy
! Component: 3650  -  total flux cleaned = 0.00484061 Jy
! Component: 3700  -  total flux cleaned = 0.00480629 Jy
! Component: 3750  -  total flux cleaned = 0.00475524 Jy
! Component: 3800  -  total flux cleaned = 0.00473831 Jy
! Component: 3850  -  total flux cleaned = 0.0047215 Jy
! Component: 3900  -  total flux cleaned = 0.00464659 Jy
! Component: 3950  -  total flux cleaned = 0.00463841 Jy
! Component: 4000  -  total flux cleaned = 0.00463016 Jy
! Component: 4050  -  total flux cleaned = 0.00458939 Jy
! Total flux subtracted in 4096 components = 0.00458927 Jy
! Clean residual min=-0.000423 max=0.000442 Jy/beam
! Clean residual mean=-0.000004 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.141985 Jy
keep
! Adding 348 model components to the UV plane model.
! The established model now contains 595 components and 0.141985 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1844-2029_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.409 x 22.07 at -1.765 degrees (North through East)
! Clean map  min=-0.00154  max=0.075119 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1844-2029_S_map.fits
wmodel /vlbi/uf001/uva//J1844-2029_S_map.mod
! Writing 595 model components to file: /vlbi/uf001/uva//J1844-2029_S_map.mod
wobs   /vlbi/uf001/uva//J1844-2029_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1844-2029_S_uvs.fits
wwins  /vlbi/uf001/uva//J1844-2029_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1844-2029_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0751191 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000158481 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.632921 0.632921 1.26584 2.53168 5.06337 10.1267 20.2535 40.5069 81.0139
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  473.992 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1844-2029_S_dfm.log closed on Mon Jan 14 04:46:37 2019