! Started logfile: /vlbi/uf001/uva//J1844+0137_S_b_dfm.log on Mon Jan 14 04:45:50 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1844+0137_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1844+0137_S_b_uva.fits
! AN table 1: 118 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J1844+0137
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4956 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1844+0137_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.996844Jy  sigma=20.539886
! Fit after  self-cal, rms=0.944611Jy  sigma=19.267246
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.353 mas, bmaj=12.54 mas, bpa=2.367 degrees
! Estimated noise=0.848042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0432886 Jy
! Component: 100  -  total flux cleaned = 0.0654385 Jy
! Total flux subtracted in 100 components = 0.0654385 Jy
! Clean residual min=-0.011790 max=0.012242 Jy/beam
! Clean residual mean=0.000050 rms=0.005018 Jy/beam
! Combined flux in latest and established models = 0.0654385 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.0654385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074307Jy  sigma=1.478872
! Fit after  self-cal, rms=0.072580Jy  sigma=1.442273
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.143 mas, bmaj=13.77 mas, bpa=1.061 degrees
! Estimated noise=0.510896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204519 Jy
! Component: 100  -  total flux cleaned = 0.0275342 Jy
! Component: 150  -  total flux cleaned = 0.0283561 Jy
! Component: 200  -  total flux cleaned = 0.0297692 Jy
! Total flux subtracted in 200 components = 0.0297692 Jy
! Clean residual min=-0.005416 max=0.005389 Jy/beam
! Clean residual mean=0.000013 rms=0.002540 Jy/beam
! Combined flux in latest and established models = 0.0952077 Jy
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 169 components and 0.0952077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064964Jy  sigma=1.250718
! Fit after  self-cal, rms=0.064502Jy  sigma=1.242431
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.143 x 13.77 at 1.061 degrees (North through East)
! Clean map  min=-0.0088061  max=0.050846 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        0.94     KP        0.83     
!   LA        0.87     NL        1.08     OV        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.94     HN        0.81     KP        0.85     
!   LA        0.91     NL        1.03     OV        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.86     KP        0.87     
!   LA        0.95     NL        1.09     OV        1.05     
! 
! 
! Fit before self-cal, rms=0.064502Jy  sigma=1.242431
! Fit after  self-cal, rms=0.060506Jy  sigma=1.212357
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.254 mas, bmaj=13.89 mas, bpa=-1.816 degrees
! Estimated noise=0.463337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00678585 Jy
! Component: 100  -  total flux cleaned = 0.00970286 Jy
! Component: 150  -  total flux cleaned = 0.0109714 Jy
! Component: 200  -  total flux cleaned = 0.0120803 Jy
! Total flux subtracted in 200 components = 0.0120803 Jy
! Clean residual min=-0.001527 max=0.001518 Jy/beam
! Clean residual mean=0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.107288 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 231 components and 0.107288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059608Jy  sigma=1.188996
! Fit after  self-cal, rms=0.059655Jy  sigma=1.185743
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059655Jy  sigma=1.185743
! Fit after  self-cal, rms=0.059302Jy  sigma=1.183428
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.196 mas, bmaj=13.93 mas, bpa=-2.411 degrees
! Estimated noise=0.459333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188162 Jy
! Component: 100  -  total flux cleaned = 0.00172526 Jy
! Component: 150  -  total flux cleaned = 0.00173151 Jy
! Component: 200  -  total flux cleaned = 0.00203378 Jy
! Total flux subtracted in 200 components = 0.00203378 Jy
! Clean residual min=-0.000938 max=0.000948 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.109322 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 294 components and 0.109322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059078Jy  sigma=1.178166
! Fit after  self-cal, rms=0.059065Jy  sigma=1.177399
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000540123 Jy
! Component: 100  -  total flux cleaned = 0.00107819 Jy
! Component: 150  -  total flux cleaned = 0.00139323 Jy
! Component: 200  -  total flux cleaned = 0.00148648 Jy
! Total flux subtracted in 200 components = 0.00148648 Jy
! Clean residual min=-0.000762 max=0.000764 Jy/beam
! Clean residual mean=0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.110808 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 340 components and 0.110808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058955Jy  sigma=1.175179
! Fit after  self-cal, rms=0.058935Jy  sigma=1.174815
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058935Jy  sigma=1.174815
! Fit after  self-cal, rms=0.058530Jy  sigma=1.174576
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.181 mas, bmaj=13.9 mas, bpa=-2.329 degrees
! Estimated noise=0.456898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155516 Jy
! Component: 100  -  total flux cleaned = -0.000210512 Jy
! Component: 150  -  total flux cleaned = -0.000295689 Jy
! Component: 200  -  total flux cleaned = -0.000131099 Jy
! Total flux subtracted in 200 components = -0.000131099 Jy
! Clean residual min=-0.000644 max=0.000643 Jy/beam
! Clean residual mean=0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.110677 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 382 components and 0.110677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058453Jy  sigma=1.173039
! Fit after  self-cal, rms=0.058461Jy  sigma=1.172671
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190504 Jy
! Component: 100  -  total flux cleaned = -0.000318622 Jy
! Component: 150  -  total flux cleaned = -0.00016295 Jy
! Component: 200  -  total flux cleaned = -8.88798e-05 Jy
! Total flux subtracted in 200 components = -8.88798e-05 Jy
! Clean residual min=-0.000586 max=0.000593 Jy/beam
! Clean residual mean=0.000001 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.110588 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 411 components and 0.110588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058404Jy  sigma=1.171517
! Fit after  self-cal, rms=0.058419Jy  sigma=1.171375
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058419Jy  sigma=1.171375
! Fit after  self-cal, rms=0.058123Jy  sigma=1.171265
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.709 mas, bmaj=14.98 mas, bpa=-3.065 degrees
! Estimated noise=0.457607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000494501 Jy
! Component: 100  -  total flux cleaned = -0.000889688 Jy
! Component: 150  -  total flux cleaned = -0.00103066 Jy
! Component: 200  -  total flux cleaned = -0.00116341 Jy
! Total flux subtracted in 200 components = -0.00116341 Jy
! Clean residual min=-0.000435 max=0.000433 Jy/beam
! Clean residual mean=0.000001 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.109425 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 440 components and 0.109425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058085Jy  sigma=1.170477
! Fit after  self-cal, rms=0.058105Jy  sigma=1.170264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.99631e-05 Jy
! Component: 100  -  total flux cleaned = -0.000186733 Jy
! Component: 150  -  total flux cleaned = -0.000368602 Jy
! Component: 200  -  total flux cleaned = -0.000538876 Jy
! Total flux subtracted in 200 components = -0.000538876 Jy
! Clean residual min=-0.000392 max=0.000393 Jy/beam
! Clean residual mean=0.000001 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.108886 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 472 components and 0.108886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058074Jy  sigma=1.169579
! Fit after  self-cal, rms=0.058087Jy  sigma=1.169498
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.178 mas, bmaj=13.87 mas, bpa=-2.232 degrees
! Estimated noise=0.454919 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.178 x 13.87 at -2.232 degrees (North through East)
! Clean map  min=-0.0029648  max=0.045195 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.362 mas, bmaj=12.53 mas, bpa=-0.3062 degrees
! Estimated noise=0.767567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0401854 Jy
! Component: 100  -  total flux cleaned = 0.0597143 Jy
! Component: 150  -  total flux cleaned = 0.0664253 Jy
! Component: 200  -  total flux cleaned = 0.071037 Jy
! Total flux subtracted in 200 components = 0.071037 Jy
! Clean residual min=-0.007306 max=0.007358 Jy/beam
! Clean residual mean=0.000025 rms=0.002964 Jy/beam
! Combined flux in latest and established models = 0.071037 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 83 model components to the UV plane model.
! The established model now contains 83 components and 0.071037 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.178 mas, bmaj=13.87 mas, bpa=-2.232 degrees
! Estimated noise=0.454919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00575612 Jy
! Component: 100  -  total flux cleaned = 0.00768147 Jy
! Component: 150  -  total flux cleaned = 0.0107348 Jy
! Component: 200  -  total flux cleaned = 0.0134179 Jy
! Total flux subtracted in 200 components = 0.0134179 Jy
! Clean residual min=-0.003131 max=0.003135 Jy/beam
! Clean residual mean=0.000005 rms=0.001380 Jy/beam
! Combined flux in latest and established models = 0.0844549 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 160 components and 0.0844549 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.709 mas, bmaj=14.98 mas, bpa=-3.065 degrees
! Estimated noise=0.457607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217573 Jy
! Component: 100  -  total flux cleaned = 0.00292116 Jy
! Component: 150  -  total flux cleaned = 0.00351043 Jy
! Component: 200  -  total flux cleaned = 0.00311643 Jy
! Total flux subtracted in 200 components = 0.00311643 Jy
! Clean residual min=-0.001527 max=0.001526 Jy/beam
! Clean residual mean=0.000003 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.0875713 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421473 Jy
! Component: 100  -  total flux cleaned = -0.000868599 Jy
! Component: 150  -  total flux cleaned = -0.000869202 Jy
! Component: 200  -  total flux cleaned = -0.000619606 Jy
! Total flux subtracted in 200 components = -0.000619606 Jy
! Clean residual min=-0.001009 max=0.001012 Jy/beam
! Clean residual mean=0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0869517 Jy
! Adding 149 model components to the UV plane model.
! The established model now contains 301 components and 0.0869517 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.178 mas, bmaj=13.87 mas, bpa=-2.232 degrees
! Estimated noise=0.454919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000419195 Jy
! Component: 100  -  total flux cleaned = -0.000672655 Jy
! Component: 150  -  total flux cleaned = -0.000813907 Jy
! Component: 200  -  total flux cleaned = -0.000856257 Jy
! Total flux subtracted in 200 components = -0.000856257 Jy
! Clean residual min=-0.000667 max=0.000672 Jy/beam
! Clean residual mean=0.000001 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0860955 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 347 components and 0.0860955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058120Jy  sigma=1.170500
! Fit after  self-cal, rms=0.058125Jy  sigma=1.169535
wmodel J1844+0137_S_b_map.mod
! Writing 347 model components to file: J1844+0137_S_b_map.mod
wobs   J1844+0137_S_b_uvs.fits
! Writing UV FITS file: J1844+0137_S_b_uvs.fits
wwins  J1844+0137_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J1844+0137_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.178 x 13.87 at -2.232 degrees (North through East)
! Clean map  min=-0.0054106  max=0.040918 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1844+0137_S_b_map.fits
wmodel /vlbi/uf001/uva//J1844+0137_S_b_map.mod
! Writing 347 model components to file: /vlbi/uf001/uva//J1844+0137_S_b_map.mod
wobs   /vlbi/uf001/uva//J1844+0137_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1844+0137_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1844+0137_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0409179 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257337 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.88673 1.88673 3.77346 7.54692 15.0938 30.1877 60.3754
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.04 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  159.005 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1844+0137_S_b_dfm.log closed on Mon Jan 14 04:45:53 2019