! Started logfile: /vlbi/uf001/uva//J1835-1115_S_dfm.log on Mon Jan 14 04:43:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1835-1115_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1835-1115_S_uva.fits
! AN table 1: 37 integrations on 1 of 1 possible baselines.
! AN table 2: 110 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.916907 visibilities/baseline/integration-bin.
! Found source: J1835-1115
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8574 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1835-1115_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.007988Jy  sigma=18.411589
! Fit after  self-cal, rms=0.951915Jy  sigma=17.361400
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.636 mas, bmaj=15.91 mas, bpa=-0.04367 degrees
! Estimated noise=0.669207 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0375121 Jy
! Component: 100  -  total flux cleaned = 0.0506928 Jy
! Total flux subtracted in 100 components = 0.0506928 Jy
! Clean residual min=-0.004859 max=0.006676 Jy/beam
! Clean residual mean=-0.000005 rms=0.001486 Jy/beam
! Combined flux in latest and established models = 0.0506928 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0506928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071011Jy  sigma=1.253730
! Fit after  self-cal, rms=0.069302Jy  sigma=1.221284
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00932136 Jy
! Component: 100  -  total flux cleaned = 0.0141501 Jy
! Total flux subtracted in 100 components = 0.0141501 Jy
! Clean residual min=-0.004013 max=0.007488 Jy/beam
! Clean residual mean=-0.000002 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.0648429 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.0648429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068177Jy  sigma=1.195655
! Fit after  self-cal, rms=0.068102Jy  sigma=1.194226
! Inverting map 
! Added new window around map position (21.5, 16.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667512 Jy
! Component: 100  -  total flux cleaned = 0.0105608 Jy
! Total flux subtracted in 100 components = 0.0105608 Jy
! Clean residual min=-0.003601 max=0.003587 Jy/beam
! Clean residual mean=-0.000006 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.0754037 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 70 components and 0.0754037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067435Jy  sigma=1.179641
! Fit after  self-cal, rms=0.067266Jy  sigma=1.176942
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.713 mas, bmaj=17.14 mas, bpa=-0.4481 degrees
! Estimated noise=0.429818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00552455 Jy
! Component: 100  -  total flux cleaned = 0.00921564 Jy
! Component: 150  -  total flux cleaned = 0.0119758 Jy
! Component: 200  -  total flux cleaned = 0.0139928 Jy
! Total flux subtracted in 200 components = 0.0139928 Jy
! Clean residual min=-0.002631 max=0.002990 Jy/beam
! Clean residual mean=-0.000008 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.0893965 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 116 components and 0.0893965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066726Jy  sigma=1.165525
! Fit after  self-cal, rms=0.066642Jy  sigma=1.163860
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.713 x 17.14 at -0.4481 degrees (North through East)
! Clean map  min=-0.0027819  max=0.052341 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.89     HN        0.88     KP        1.01     
!   LA        0.94     NL        1.10     OV        1.08     PT        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.88     HN        0.82     KP        1.00     
!   LA        0.91     NL        1.11     OV        1.08     PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.87     HN        0.76     KP        1.03     
!   LA        1.00     NL        1.15     OV        1.00     PT        0.99     
! 
! 
! Fit before self-cal, rms=0.066642Jy  sigma=1.163860
! Fit after  self-cal, rms=0.065101Jy  sigma=1.158064
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.551 mas, bmaj=17.26 mas, bpa=-0.706 degrees
! Estimated noise=0.417798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131475 Jy
! Component: 100  -  total flux cleaned = 0.00191123 Jy
! Component: 150  -  total flux cleaned = 0.00214494 Jy
! Component: 200  -  total flux cleaned = 0.00223169 Jy
! Total flux subtracted in 200 components = 0.00223169 Jy
! Clean residual min=-0.002460 max=0.002243 Jy/beam
! Clean residual mean=-0.000002 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0916282 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 149 components and 0.0916282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065047Jy  sigma=1.156937
! Fit after  self-cal, rms=0.065166Jy  sigma=1.155670
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065166Jy  sigma=1.155670
! Fit after  self-cal, rms=0.065375Jy  sigma=1.153354
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.507 mas, bmaj=17.26 mas, bpa=-0.9548 degrees
! Estimated noise=0.418866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00099964 Jy
! Component: 100  -  total flux cleaned = 0.00111676 Jy
! Component: 150  -  total flux cleaned = 0.00121954 Jy
! Component: 200  -  total flux cleaned = 0.00131108 Jy
! Total flux subtracted in 200 components = 0.00131108 Jy
! Clean residual min=-0.002077 max=0.002233 Jy/beam
! Clean residual mean=-0.000003 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.0929393 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 174 components and 0.0929393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065351Jy  sigma=1.152858
! Fit after  self-cal, rms=0.065389Jy  sigma=1.152691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002197 Jy
! Component: 100  -  total flux cleaned = 0.000240607 Jy
! Component: 150  -  total flux cleaned = 0.000281022 Jy
! Component: 200  -  total flux cleaned = 0.000299885 Jy
! Total flux subtracted in 200 components = 0.000299885 Jy
! Clean residual min=-0.002030 max=0.002170 Jy/beam
! Clean residual mean=-0.000003 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.0932392 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 187 components and 0.0932392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065377Jy  sigma=1.152454
! Fit after  self-cal, rms=0.065377Jy  sigma=1.152432
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065377Jy  sigma=1.152432
! Fit after  self-cal, rms=0.065225Jy  sigma=1.151489
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.485 mas, bmaj=17.24 mas, bpa=-1.027 degrees
! Estimated noise=0.4162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352275 Jy
! Component: 100  -  total flux cleaned = 0.000352833 Jy
! Component: 150  -  total flux cleaned = 0.000413041 Jy
! Component: 200  -  total flux cleaned = 0.000467949 Jy
! Total flux subtracted in 200 components = 0.000467949 Jy
! Clean residual min=-0.001756 max=0.002225 Jy/beam
! Clean residual mean=-0.000003 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0937071 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 195 components and 0.0937071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065210Jy  sigma=1.151239
! Fit after  self-cal, rms=0.065231Jy  sigma=1.151106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (75, 60).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082262 Jy
! Component: 100  -  total flux cleaned = 0.000529375 Jy
! Component: 150  -  total flux cleaned = 0.000492356 Jy
! Component: 200  -  total flux cleaned = 0.000429539 Jy
! Total flux subtracted in 200 components = 0.000429539 Jy
! Clean residual min=-0.001468 max=0.001641 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0941366 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 236 components and 0.0941366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065171Jy  sigma=1.149798
! Fit after  self-cal, rms=0.065138Jy  sigma=1.149532
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065138Jy  sigma=1.149532
! Fit after  self-cal, rms=0.064851Jy  sigma=1.149399
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.634 mas, bmaj=17.88 mas, bpa=0.3423 degrees
! Estimated noise=0.435543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101094 Jy
! Component: 100  -  total flux cleaned = 0.000129759 Jy
! Component: 150  -  total flux cleaned = 0.000132573 Jy
! Component: 200  -  total flux cleaned = 0.000110757 Jy
! Total flux subtracted in 200 components = 0.000110757 Jy
! Clean residual min=-0.001442 max=0.001547 Jy/beam
! Clean residual mean=-0.000003 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.0942474 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 258 components and 0.0942474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064824Jy  sigma=1.148841
! Fit after  self-cal, rms=0.064824Jy  sigma=1.148738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001067 Jy
! Component: 100  -  total flux cleaned = -0.000170953 Jy
! Component: 150  -  total flux cleaned = -0.00026271 Jy
! Component: 200  -  total flux cleaned = -0.000364783 Jy
! Total flux subtracted in 200 components = -0.000364783 Jy
! Clean residual min=-0.001444 max=0.001552 Jy/beam
! Clean residual mean=-0.000003 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0938826 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 268 components and 0.0938826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064811Jy  sigma=1.148474
! Fit after  self-cal, rms=0.064805Jy  sigma=1.148440
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.45 mas, bmaj=17.25 mas, bpa=-1.128 degrees
! Estimated noise=0.413163 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.45 x 17.25 at -1.128 degrees (North through East)
! Clean map  min=-0.0018362  max=0.050117 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.428 mas, bmaj=15.89 mas, bpa=-0.289 degrees
! Estimated noise=0.643219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0371673 Jy
! Component: 100  -  total flux cleaned = 0.0530917 Jy
! Component: 150  -  total flux cleaned = 0.0629737 Jy
! Component: 200  -  total flux cleaned = 0.0696716 Jy
! Total flux subtracted in 200 components = 0.0696716 Jy
! Clean residual min=-0.003612 max=0.004264 Jy/beam
! Clean residual mean=-0.000004 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.0696717 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0696717 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.45 mas, bmaj=17.25 mas, bpa=-1.128 degrees
! Estimated noise=0.413163 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16, 15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0064461 Jy
! Component: 100  -  total flux cleaned = 0.0108651 Jy
! Component: 150  -  total flux cleaned = 0.0142947 Jy
! Component: 200  -  total flux cleaned = 0.0169112 Jy
! Total flux subtracted in 200 components = 0.0169112 Jy
! Clean residual min=-0.002112 max=0.002327 Jy/beam
! Clean residual mean=-0.000002 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.0865828 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 105 components and 0.0865828 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.634 mas, bmaj=17.88 mas, bpa=0.3423 degrees
! Estimated noise=0.435543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246655 Jy
! Component: 100  -  total flux cleaned = 0.00351998 Jy
! Component: 150  -  total flux cleaned = 0.00434293 Jy
! Component: 200  -  total flux cleaned = 0.00491883 Jy
! Total flux subtracted in 200 components = 0.00491883 Jy
! Clean residual min=-0.001654 max=0.001727 Jy/beam
! Clean residual mean=-0.000003 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.0915017 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033631 Jy
! Component: 100  -  total flux cleaned = 0.000487529 Jy
! Component: 150  -  total flux cleaned = 0.000487669 Jy
! Component: 200  -  total flux cleaned = 0.000450036 Jy
! Total flux subtracted in 200 components = 0.000450036 Jy
! Clean residual min=-0.001518 max=0.001482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0919517 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 217 components and 0.0919517 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.45 mas, bmaj=17.25 mas, bpa=-1.128 degrees
! Estimated noise=0.413163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182978 Jy
! Component: 100  -  total flux cleaned = -0.000145742 Jy
! Component: 150  -  total flux cleaned = -7.60739e-05 Jy
! Component: 200  -  total flux cleaned = -1.26612e-05 Jy
! Total flux subtracted in 200 components = -1.26612e-05 Jy
! Clean residual min=-0.001528 max=0.001634 Jy/beam
! Clean residual mean=-0.000003 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.091939 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 253 components and 0.091939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064833Jy  sigma=1.149086
! Fit after  self-cal, rms=0.064793Jy  sigma=1.148619
wmodel J1835-1115_S_map.mod
! Writing 253 model components to file: J1835-1115_S_map.mod
wobs   J1835-1115_S_uvs.fits
! Writing UV FITS file: J1835-1115_S_uvs.fits
wwins  J1835-1115_S_map.win
! wwins: Wrote 4 windows to J1835-1115_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104229 Jy
! Component: 100  -  total flux cleaned = 0.000248061 Jy
! Component: 150  -  total flux cleaned = 0.000362217 Jy
! Component: 200  -  total flux cleaned = 0.000472074 Jy
! Component: 250  -  total flux cleaned = 0.000535101 Jy
! Component: 300  -  total flux cleaned = 0.000596648 Jy
! Component: 350  -  total flux cleaned = 0.000656647 Jy
! Component: 400  -  total flux cleaned = 0.000753706 Jy
! Component: 450  -  total flux cleaned = 0.00084781 Jy
! Component: 500  -  total flux cleaned = 0.000921171 Jy
! Component: 550  -  total flux cleaned = 0.00109919 Jy
! Component: 600  -  total flux cleaned = 0.00122028 Jy
! Component: 650  -  total flux cleaned = 0.00130455 Jy
! Component: 700  -  total flux cleaned = 0.00145366 Jy
! Component: 750  -  total flux cleaned = 0.00155064 Jy
! Component: 800  -  total flux cleaned = 0.00161401 Jy
! Component: 850  -  total flux cleaned = 0.00175307 Jy
! Component: 900  -  total flux cleaned = 0.00181388 Jy
! Component: 950  -  total flux cleaned = 0.00193252 Jy
! Component: 1000  -  total flux cleaned = 0.00197621 Jy
! Component: 1050  -  total flux cleaned = 0.00206185 Jy
! Component: 1100  -  total flux cleaned = 0.00210396 Jy
! Component: 1150  -  total flux cleaned = 0.00218631 Jy
! Component: 1200  -  total flux cleaned = 0.00219991 Jy
! Component: 1250  -  total flux cleaned = 0.00223956 Jy
! Component: 1300  -  total flux cleaned = 0.00229169 Jy
! Component: 1350  -  total flux cleaned = 0.00232993 Jy
! Component: 1400  -  total flux cleaned = 0.00232982 Jy
! Component: 1450  -  total flux cleaned = 0.00236679 Jy
! Component: 1500  -  total flux cleaned = 0.00240328 Jy
! Component: 1550  -  total flux cleaned = 0.00239119 Jy
! Component: 1600  -  total flux cleaned = 0.00241502 Jy
! Component: 1650  -  total flux cleaned = 0.00241517 Jy
! Component: 1700  -  total flux cleaned = 0.00240381 Jy
! Component: 1750  -  total flux cleaned = 0.00240402 Jy
! Component: 1800  -  total flux cleaned = 0.00237023 Jy
! Component: 1850  -  total flux cleaned = 0.00234805 Jy
! Component: 1900  -  total flux cleaned = 0.00231494 Jy
! Component: 1950  -  total flux cleaned = 0.0022931 Jy
! Component: 2000  -  total flux cleaned = 0.00227143 Jy
! Component: 2050  -  total flux cleaned = 0.00226071 Jy
! Component: 2100  -  total flux cleaned = 0.00225001 Jy
! Component: 2150  -  total flux cleaned = 0.00221858 Jy
! Component: 2200  -  total flux cleaned = 0.00220818 Jy
! Component: 2250  -  total flux cleaned = 0.00216698 Jy
! Component: 2300  -  total flux cleaned = 0.00214665 Jy
! Component: 2350  -  total flux cleaned = 0.00215659 Jy
! Component: 2400  -  total flux cleaned = 0.00210657 Jy
! Component: 2450  -  total flux cleaned = 0.00209674 Jy
! Component: 2500  -  total flux cleaned = 0.00210661 Jy
! Component: 2550  -  total flux cleaned = 0.00210669 Jy
! Component: 2600  -  total flux cleaned = 0.00206803 Jy
! Component: 2650  -  total flux cleaned = 0.00208716 Jy
! Component: 2700  -  total flux cleaned = 0.00207766 Jy
! Component: 2750  -  total flux cleaned = 0.00205898 Jy
! Component: 2800  -  total flux cleaned = 0.00204034 Jy
! Component: 2850  -  total flux cleaned = 0.00204955 Jy
! Component: 2900  -  total flux cleaned = 0.00203119 Jy
! Component: 2950  -  total flux cleaned = 0.00204034 Jy
! Component: 3000  -  total flux cleaned = 0.0020402 Jy
! Component: 3050  -  total flux cleaned = 0.0020134 Jy
! Component: 3100  -  total flux cleaned = 0.00204898 Jy
! Component: 3150  -  total flux cleaned = 0.00204896 Jy
! Component: 3200  -  total flux cleaned = 0.00204887 Jy
! Component: 3250  -  total flux cleaned = 0.00207478 Jy
! Component: 3300  -  total flux cleaned = 0.00205757 Jy
! Component: 3350  -  total flux cleaned = 0.00206615 Jy
! Component: 3400  -  total flux cleaned = 0.00205778 Jy
! Component: 3450  -  total flux cleaned = 0.00210848 Jy
! Component: 3500  -  total flux cleaned = 0.00210841 Jy
! Component: 3550  -  total flux cleaned = 0.00210016 Jy
! Component: 3600  -  total flux cleaned = 0.00210835 Jy
! Component: 3650  -  total flux cleaned = 0.00212472 Jy
! Component: 3700  -  total flux cleaned = 0.00214915 Jy
! Component: 3750  -  total flux cleaned = 0.00214101 Jy
! Component: 3800  -  total flux cleaned = 0.00212498 Jy
! Component: 3850  -  total flux cleaned = 0.00214095 Jy
! Component: 3900  -  total flux cleaned = 0.002125 Jy
! Component: 3950  -  total flux cleaned = 0.00213285 Jy
! Component: 4000  -  total flux cleaned = 0.00212493 Jy
! Component: 4050  -  total flux cleaned = 0.00210925 Jy
! Total flux subtracted in 4096 components = 0.00208593 Jy
! Clean residual min=-0.000428 max=0.000388 Jy/beam
! Clean residual mean=-0.000002 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.0940249 Jy
keep
! Adding 370 model components to the UV plane model.
! The established model now contains 622 components and 0.0940249 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1835-1115_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.45 x 17.25 at -1.128 degrees (North through East)
! Clean map  min=-0.0018816  max=0.04972 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1835-1115_S_map.fits
wmodel /vlbi/uf001/uva//J1835-1115_S_map.mod
! Writing 622 model components to file: /vlbi/uf001/uva//J1835-1115_S_map.mod
wobs   /vlbi/uf001/uva//J1835-1115_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1835-1115_S_uvs.fits
wwins  /vlbi/uf001/uva//J1835-1115_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1835-1115_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0497204 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166198 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0028 1.0028 2.00559 4.01119 8.02238 16.0448 32.0895 64.179
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  299.163 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1835-1115_S_dfm.log closed on Mon Jan 14 04:43:35 2019