! Started logfile: /vlbi/uf001/uva//J1835+3241_S_dfm.log on Mon Jan 14 04:43:06 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1835+3241_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1835+3241_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.736508 visibilities/baseline/integration-bin.
! Found source: J1835+3241
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1835+3241_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 108 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 108 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 108 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033160Jy  sigma=21.544687
! Fit after  self-cal, rms=0.819163Jy  sigma=17.087368
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=4.886 mas, bpa=-1.126 degrees
! Estimated noise=0.753383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135086 Jy
! Component: 100  -  total flux cleaned = 0.182331 Jy
! Total flux subtracted in 100 components = 0.182331 Jy
! Clean residual min=-0.010153 max=0.024164 Jy/beam
! Clean residual mean=-0.000066 rms=0.003078 Jy/beam
! Combined flux in latest and established models = 0.182331 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.182331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083724Jy  sigma=1.726172
! Fit after  self-cal, rms=0.083594Jy  sigma=1.724210
! Inverting map 
! Added new window around map position (5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272633 Jy
! Component: 100  -  total flux cleaned = 0.04557 Jy
! Total flux subtracted in 100 components = 0.04557 Jy
! Clean residual min=-0.007683 max=0.011240 Jy/beam
! Clean residual mean=-0.000038 rms=0.002135 Jy/beam
! Combined flux in latest and established models = 0.227901 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 0.227901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070468Jy  sigma=1.445574
! Fit after  self-cal, rms=0.070181Jy  sigma=1.440358
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=5.816 mas, bpa=-0.1844 degrees
! Estimated noise=0.574812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189382 Jy
! Component: 100  -  total flux cleaned = 0.0310431 Jy
! Component: 150  -  total flux cleaned = 0.039505 Jy
! Component: 200  -  total flux cleaned = 0.0456283 Jy
! Total flux subtracted in 200 components = 0.0456283 Jy
! Clean residual min=-0.006597 max=0.011224 Jy/beam
! Clean residual mean=-0.000018 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.27353 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 63 components and 0.27353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064128Jy  sigma=1.307136
! Fit after  self-cal, rms=0.063892Jy  sigma=1.302598
! Inverting map 
! Added new window around map position (11, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100664 Jy
! Component: 100  -  total flux cleaned = 0.0139374 Jy
! Component: 150  -  total flux cleaned = 0.0152163 Jy
! Component: 200  -  total flux cleaned = 0.0163804 Jy
! Total flux subtracted in 200 components = 0.0163804 Jy
! Clean residual min=-0.005470 max=0.007288 Jy/beam
! Clean residual mean=-0.000009 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.28991 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.28991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062306Jy  sigma=1.265755
! Fit after  self-cal, rms=0.062044Jy  sigma=1.260477
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 5.816 at -0.1844 degrees (North through East)
! Clean map  min=-0.0052216  max=0.17593 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.92     HN        1.13     KP        0.99     
!   LA        0.98     MK        0.94     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.91     HN        1.10     KP        1.01     
!   LA        0.96     MK        0.94     NL        1.10     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.12     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.08     OV        0.97     
!   PT        1.02     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.062044Jy  sigma=1.260477
! Fit after  self-cal, rms=0.062555Jy  sigma=1.224790
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=5.833 mas, bpa=0.313 degrees
! Estimated noise=0.576041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000967743 Jy
! Component: 100  -  total flux cleaned = -0.000667425 Jy
! Component: 150  -  total flux cleaned = -0.000492777 Jy
! Component: 200  -  total flux cleaned = -0.000336732 Jy
! Total flux subtracted in 200 components = -0.000336732 Jy
! Clean residual min=-0.003826 max=0.004648 Jy/beam
! Clean residual mean=0.000011 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.289573 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.289573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062239Jy  sigma=1.219769
! Fit after  self-cal, rms=0.062270Jy  sigma=1.219366
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062270Jy  sigma=1.219366
! Fit after  self-cal, rms=0.060816Jy  sigma=1.190739
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.356 mas, bmaj=5.752 mas, bpa=0.05091 degrees
! Estimated noise=0.576021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000457147 Jy
! Component: 100  -  total flux cleaned = -0.000154572 Jy
! Component: 150  -  total flux cleaned = 5.18514e-07 Jy
! Component: 200  -  total flux cleaned = 9.0191e-05 Jy
! Total flux subtracted in 200 components = 9.0191e-05 Jy
! Clean residual min=-0.002933 max=0.003033 Jy/beam
! Clean residual mean=0.000011 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.289663 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.289663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060701Jy  sigma=1.188667
! Fit after  self-cal, rms=0.060697Jy  sigma=1.188340
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.65655e-06 Jy
! Component: 100  -  total flux cleaned = 3.21819e-05 Jy
! Component: 150  -  total flux cleaned = 3.53001e-05 Jy
! Component: 200  -  total flux cleaned = 3.58042e-06 Jy
! Total flux subtracted in 200 components = 3.58042e-06 Jy
! Clean residual min=-0.002901 max=0.003026 Jy/beam
! Clean residual mean=0.000011 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.289667 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.289667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060650Jy  sigma=1.187412
! Fit after  self-cal, rms=0.060649Jy  sigma=1.187321
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060649Jy  sigma=1.187321
! Fit after  self-cal, rms=0.060824Jy  sigma=1.186968
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.356 mas, bmaj=5.74 mas, bpa=0.006726 degrees
! Estimated noise=0.576302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000240481 Jy
! Component: 100  -  total flux cleaned = -0.000200342 Jy
! Component: 150  -  total flux cleaned = -0.000200107 Jy
! Component: 200  -  total flux cleaned = -0.000199859 Jy
! Total flux subtracted in 200 components = -0.000199859 Jy
! Clean residual min=-0.002848 max=0.002940 Jy/beam
! Clean residual mean=0.000011 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.289467 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.289467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060781Jy  sigma=1.186110
! Fit after  self-cal, rms=0.060783Jy  sigma=1.186047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.09536e-05 Jy
! Component: 100  -  total flux cleaned = -6.96031e-05 Jy
! Component: 150  -  total flux cleaned = -0.000122739 Jy
! Component: 200  -  total flux cleaned = -0.000121899 Jy
! Total flux subtracted in 200 components = -0.000121899 Jy
! Clean residual min=-0.002822 max=0.002924 Jy/beam
! Clean residual mean=0.000011 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.289345 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 151 components and 0.289345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060758Jy  sigma=1.185549
! Fit after  self-cal, rms=0.060758Jy  sigma=1.185506
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060758Jy  sigma=1.185506
! Fit after  self-cal, rms=0.060938Jy  sigma=1.185357
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=8.927 mas, bpa=-0.1509 degrees
! Estimated noise=0.744804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.59607e-05 Jy
! Component: 100  -  total flux cleaned = 7.43281e-05 Jy
! Component: 150  -  total flux cleaned = 9.51055e-05 Jy
! Component: 200  -  total flux cleaned = 0.000114173 Jy
! Total flux subtracted in 200 components = 0.000114173 Jy
! Clean residual min=-0.002932 max=0.002943 Jy/beam
! Clean residual mean=0.000022 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.289459 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 164 components and 0.289459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060920Jy  sigma=1.185122
! Fit after  self-cal, rms=0.060923Jy  sigma=1.185078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.21915e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129345 Jy
! Component: 150  -  total flux cleaned = 0.000146154 Jy
! Component: 200  -  total flux cleaned = 0.00014654 Jy
! Total flux subtracted in 200 components = 0.00014654 Jy
! Clean residual min=-0.002970 max=0.002947 Jy/beam
! Clean residual mean=0.000021 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.289606 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 169 components and 0.289606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060914Jy  sigma=1.184957
! Fit after  self-cal, rms=0.060915Jy  sigma=1.184930
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=5.729 mas, bpa=-0.0233 degrees
! Estimated noise=0.57676 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.359 x 5.729 at -0.0233 degrees (North through East)
! Clean map  min=-0.0027274  max=0.17545 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.92 mas, bmaj=4.806 mas, bpa=-1.148 degrees
! Estimated noise=0.750117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134396 Jy
! Component: 100  -  total flux cleaned = 0.18241 Jy
! Component: 150  -  total flux cleaned = 0.209779 Jy
! Component: 200  -  total flux cleaned = 0.227621 Jy
! Total flux subtracted in 200 components = 0.227621 Jy
! Clean residual min=-0.005206 max=0.009823 Jy/beam
! Clean residual mean=-0.000026 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.227621 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.227621 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=5.729 mas, bpa=-0.0233 degrees
! Estimated noise=0.57676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175219 Jy
! Component: 100  -  total flux cleaned = 0.0290937 Jy
! Component: 150  -  total flux cleaned = 0.0370833 Jy
! Component: 200  -  total flux cleaned = 0.0427441 Jy
! Total flux subtracted in 200 components = 0.0427441 Jy
! Clean residual min=-0.003608 max=0.003668 Jy/beam
! Clean residual mean=0.000001 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.270365 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 58 components and 0.270365 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=8.927 mas, bpa=-0.1509 degrees
! Estimated noise=0.744804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00711146 Jy
! Component: 100  -  total flux cleaned = 0.0110564 Jy
! Component: 150  -  total flux cleaned = 0.0136796 Jy
! Component: 200  -  total flux cleaned = 0.0154837 Jy
! Total flux subtracted in 200 components = 0.0154837 Jy
! Clean residual min=-0.003165 max=0.003040 Jy/beam
! Clean residual mean=0.000018 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.285849 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124921 Jy
! Component: 100  -  total flux cleaned = 0.0017656 Jy
! Component: 150  -  total flux cleaned = 0.00211297 Jy
! Component: 200  -  total flux cleaned = 0.00236979 Jy
! Total flux subtracted in 200 components = 0.00236979 Jy
! Clean residual min=-0.002927 max=0.003004 Jy/beam
! Clean residual mean=0.000020 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.288218 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 134 components and 0.288218 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=5.729 mas, bpa=-0.0233 degrees
! Estimated noise=0.57676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000188188 Jy
! Component: 100  -  total flux cleaned = -0.000371714 Jy
! Component: 150  -  total flux cleaned = -0.000253255 Jy
! Component: 200  -  total flux cleaned = -0.000218052 Jy
! Total flux subtracted in 200 components = -0.000218052 Jy
! Clean residual min=-0.002762 max=0.003038 Jy/beam
! Clean residual mean=0.000010 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.288 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 149 components and 0.288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060995Jy  sigma=1.186461
! Fit after  self-cal, rms=0.060977Jy  sigma=1.186052
wmodel J1835+3241_S_map.mod
! Writing 149 model components to file: J1835+3241_S_map.mod
wobs   J1835+3241_S_uvs.fits
! Writing UV FITS file: J1835+3241_S_uvs.fits
wwins  J1835+3241_S_map.win
! wwins: Wrote 3 windows to J1835+3241_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.02937e-05 Jy
! Component: 100  -  total flux cleaned = 6.06273e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103225 Jy
! Component: 200  -  total flux cleaned = 0.000145772 Jy
! Component: 250  -  total flux cleaned = 0.000146094 Jy
! Component: 300  -  total flux cleaned = 0.000225167 Jy
! Component: 350  -  total flux cleaned = 0.000225725 Jy
! Component: 400  -  total flux cleaned = 0.000226457 Jy
! Component: 450  -  total flux cleaned = 0.000227117 Jy
! Component: 500  -  total flux cleaned = 0.000155174 Jy
! Component: 550  -  total flux cleaned = 0.000119334 Jy
! Component: 600  -  total flux cleaned = 1.57273e-05 Jy
! Component: 650  -  total flux cleaned = -1.82687e-05 Jy
! Component: 700  -  total flux cleaned = -0.000150384 Jy
! Component: 750  -  total flux cleaned = -0.000149634 Jy
! Component: 800  -  total flux cleaned = -0.000182017 Jy
! Component: 850  -  total flux cleaned = -0.000214017 Jy
! Component: 900  -  total flux cleaned = -0.000307451 Jy
! Component: 950  -  total flux cleaned = -0.000307879 Jy
! Component: 1000  -  total flux cleaned = -0.0004281 Jy
! Component: 1050  -  total flux cleaned = -0.000398112 Jy
! Component: 1100  -  total flux cleaned = -0.000369214 Jy
! Component: 1150  -  total flux cleaned = -0.000369228 Jy
! Component: 1200  -  total flux cleaned = -0.000284146 Jy
! Component: 1250  -  total flux cleaned = -0.000256736 Jy
! Component: 1300  -  total flux cleaned = -0.000311931 Jy
! Component: 1350  -  total flux cleaned = -0.000284608 Jy
! Component: 1400  -  total flux cleaned = -0.000311599 Jy
! Component: 1450  -  total flux cleaned = -0.000311526 Jy
! Component: 1500  -  total flux cleaned = -0.000311934 Jy
! Component: 1550  -  total flux cleaned = -0.000364305 Jy
! Component: 1600  -  total flux cleaned = -0.000467568 Jy
! Component: 1650  -  total flux cleaned = -0.00049321 Jy
! Component: 1700  -  total flux cleaned = -0.000568726 Jy
! Component: 1750  -  total flux cleaned = -0.000568957 Jy
! Component: 1800  -  total flux cleaned = -0.000568679 Jy
! Component: 1850  -  total flux cleaned = -0.00069088 Jy
! Component: 1900  -  total flux cleaned = -0.00059377 Jy
! Component: 1950  -  total flux cleaned = -0.000641853 Jy
! Component: 2000  -  total flux cleaned = -0.000712975 Jy
! Component: 2050  -  total flux cleaned = -0.000619364 Jy
! Component: 2100  -  total flux cleaned = -0.00059665 Jy
! Component: 2150  -  total flux cleaned = -0.000619327 Jy
! Component: 2200  -  total flux cleaned = -0.000619517 Jy
! Component: 2250  -  total flux cleaned = -0.000664584 Jy
! Component: 2300  -  total flux cleaned = -0.000620096 Jy
! Component: 2350  -  total flux cleaned = -0.000465254 Jy
! Component: 2400  -  total flux cleaned = -0.000531327 Jy
! Component: 2450  -  total flux cleaned = -0.000444196 Jy
! Component: 2500  -  total flux cleaned = -0.000422795 Jy
! Component: 2550  -  total flux cleaned = -0.000337163 Jy
! Component: 2600  -  total flux cleaned = -0.000294139 Jy
! Component: 2650  -  total flux cleaned = -0.00023091 Jy
! Component: 2700  -  total flux cleaned = -8.45208e-05 Jy
! Component: 2750  -  total flux cleaned = -1.56594e-06 Jy
! Component: 2800  -  total flux cleaned = -4.26572e-05 Jy
! Component: 2850  -  total flux cleaned = 5.96336e-05 Jy
! Component: 2900  -  total flux cleaned = 0.000120257 Jy
! Component: 2950  -  total flux cleaned = 9.99262e-05 Jy
! Component: 3000  -  total flux cleaned = 0.000159967 Jy
! Component: 3050  -  total flux cleaned = 0.000179716 Jy
! Component: 3100  -  total flux cleaned = 0.000297808 Jy
! Component: 3150  -  total flux cleaned = 0.000278079 Jy
! Component: 3200  -  total flux cleaned = 0.000355796 Jy
! Component: 3250  -  total flux cleaned = 0.000375193 Jy
! Component: 3300  -  total flux cleaned = 0.00045171 Jy
! Component: 3350  -  total flux cleaned = 0.000489814 Jy
! Component: 3400  -  total flux cleaned = 0.000527515 Jy
! Component: 3450  -  total flux cleaned = 0.000546347 Jy
! Component: 3500  -  total flux cleaned = 0.000583594 Jy
! Component: 3550  -  total flux cleaned = 0.000620723 Jy
! Component: 3600  -  total flux cleaned = 0.000675921 Jy
! Component: 3650  -  total flux cleaned = 0.000730769 Jy
! Component: 3700  -  total flux cleaned = 0.000767273 Jy
! Component: 3750  -  total flux cleaned = 0.00076729 Jy
! Component: 3800  -  total flux cleaned = 0.0008212 Jy
! Component: 3850  -  total flux cleaned = 0.00091056 Jy
! Component: 3900  -  total flux cleaned = 0.000910492 Jy
! Component: 3950  -  total flux cleaned = 0.000998655 Jy
! Component: 4000  -  total flux cleaned = 0.00105119 Jy
! Component: 4050  -  total flux cleaned = 0.00101634 Jy
! Total flux subtracted in 4096 components = 0.00110294 Jy
! Clean residual min=-0.001113 max=0.000970 Jy/beam
! Clean residual mean=0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.289103 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 466 components and 0.289103 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1835+3241_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.359 x 5.729 at -0.0233 degrees (North through East)
! Clean map  min=-0.0016246  max=0.17555 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1835+3241_S_map.fits
wmodel /vlbi/uf001/uva//J1835+3241_S_map.mod
! Writing 466 model components to file: /vlbi/uf001/uva//J1835+3241_S_map.mod
wobs   /vlbi/uf001/uva//J1835+3241_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1835+3241_S_uvs.fits
wwins  /vlbi/uf001/uva//J1835+3241_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1835+3241_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175549 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000309898 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.529591 0.529591 1.05918 2.11836 4.23673 8.47345 16.9469 33.8938 67.7876
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  566.475 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1835+3241_S_dfm.log closed on Mon Jan 14 04:43:10 2019