! Started logfile: /vlbi/uf001/uva//J1834+0506_S_dfm.log on Mon Jan 14 04:42:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1834+0506_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1834+0506_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981287 visibilities/baseline/integration-bin.
! Found source: J1834+0506
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7551 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1834+0506_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002882Jy  sigma=21.227093
! Fit after  self-cal, rms=0.858878Jy  sigma=18.170032
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=6.659 mas, bpa=-3.253 degrees
! Estimated noise=0.542443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105925 Jy
! Component: 100  -  total flux cleaned = 0.146056 Jy
! Total flux subtracted in 100 components = 0.146056 Jy
! Clean residual min=-0.006424 max=0.018486 Jy/beam
! Clean residual mean=0.000011 rms=0.001733 Jy/beam
! Combined flux in latest and established models = 0.146056 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.146056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071481Jy  sigma=1.458052
! Fit after  self-cal, rms=0.071347Jy  sigma=1.455500
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206923 Jy
! Component: 100  -  total flux cleaned = 0.03125 Jy
! Total flux subtracted in 100 components = 0.03125 Jy
! Clean residual min=-0.003808 max=0.004983 Jy/beam
! Clean residual mean=0.000005 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.177306 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.177306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064620Jy  sigma=1.302067
! Fit after  self-cal, rms=0.064587Jy  sigma=1.301422
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569551 Jy
! Component: 100  -  total flux cleaned = 0.00890419 Jy
! Total flux subtracted in 100 components = 0.00890419 Jy
! Clean residual min=-0.003176 max=0.003746 Jy/beam
! Clean residual mean=0.000003 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.18621 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.18621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064010Jy  sigma=1.287417
! Fit after  self-cal, rms=0.064004Jy  sigma=1.287190
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.247 mas, bmaj=7.575 mas, bpa=-2.536 degrees
! Estimated noise=0.393513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00411548 Jy
! Component: 100  -  total flux cleaned = 0.00664701 Jy
! Component: 150  -  total flux cleaned = 0.00846278 Jy
! Component: 200  -  total flux cleaned = 0.00908467 Jy
! Total flux subtracted in 200 components = 0.00908467 Jy
! Clean residual min=-0.002831 max=0.002972 Jy/beam
! Clean residual mean=0.000011 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.195295 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 41 components and 0.195295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063716Jy  sigma=1.280061
! Fit after  self-cal, rms=0.063698Jy  sigma=1.279658
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.247 x 7.575 at -2.536 degrees (North through East)
! Clean map  min=-0.0028265  max=0.14068 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.97     
!   PT        1.09     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.99     MK        0.98     NL        1.01     OV        1.02     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.063698Jy  sigma=1.279658
! Fit after  self-cal, rms=0.062971Jy  sigma=1.273436
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.245 mas, bmaj=7.576 mas, bpa=-2.449 degrees
! Estimated noise=0.390214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120895 Jy
! Component: 100  -  total flux cleaned = 4.35041e-05 Jy
! Component: 150  -  total flux cleaned = 4.30671e-05 Jy
! Component: 200  -  total flux cleaned = -8.31767e-06 Jy
! Total flux subtracted in 200 components = -8.31767e-06 Jy
! Clean residual min=-0.002360 max=0.002463 Jy/beam
! Clean residual mean=0.000010 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.195287 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.195287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062929Jy  sigma=1.272747
! Fit after  self-cal, rms=0.062933Jy  sigma=1.272643
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062933Jy  sigma=1.272643
! Fit after  self-cal, rms=0.063585Jy  sigma=1.262170
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.242 mas, bmaj=7.563 mas, bpa=-2.385 degrees
! Estimated noise=0.390247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000629279 Jy
! Component: 100  -  total flux cleaned = 0.000739645 Jy
! Component: 150  -  total flux cleaned = 0.000795068 Jy
! Component: 200  -  total flux cleaned = 0.000811548 Jy
! Total flux subtracted in 200 components = 0.000811548 Jy
! Clean residual min=-0.001964 max=0.002019 Jy/beam
! Clean residual mean=-0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.196098 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 76 components and 0.196098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063569Jy  sigma=1.261849
! Fit after  self-cal, rms=0.063602Jy  sigma=1.261763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (115.5, -73).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011618 Jy
! Component: 100  -  total flux cleaned = 0.00086741 Jy
! Component: 150  -  total flux cleaned = 0.000693884 Jy
! Component: 200  -  total flux cleaned = 0.000547265 Jy
! Total flux subtracted in 200 components = 0.000547265 Jy
! Clean residual min=-0.001898 max=0.001795 Jy/beam
! Clean residual mean=0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.196645 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.196645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063538Jy  sigma=1.260520
! Fit after  self-cal, rms=0.063533Jy  sigma=1.260469
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063533Jy  sigma=1.260469
! Fit after  self-cal, rms=0.063563Jy  sigma=1.260273
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.238 mas, bmaj=7.557 mas, bpa=-2.389 degrees
! Estimated noise=0.389745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.48772e-05 Jy
! Component: 100  -  total flux cleaned = 3.40203e-05 Jy
! Component: 150  -  total flux cleaned = 5.73891e-05 Jy
! Component: 200  -  total flux cleaned = 5.89471e-05 Jy
! Total flux subtracted in 200 components = 5.89471e-05 Jy
! Clean residual min=-0.001850 max=0.001783 Jy/beam
! Clean residual mean=0.000000 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.196704 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.196704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063545Jy  sigma=1.259920
! Fit after  self-cal, rms=0.063548Jy  sigma=1.259908
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.49235e-05 Jy
! Component: 100  -  total flux cleaned = -1.16988e-05 Jy
! Component: 150  -  total flux cleaned = -2.87553e-05 Jy
! Component: 200  -  total flux cleaned = -7.9013e-05 Jy
! Total flux subtracted in 200 components = -7.9013e-05 Jy
! Clean residual min=-0.001827 max=0.001794 Jy/beam
! Clean residual mean=-0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.196625 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 0.196625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.259712
! Fit after  self-cal, rms=0.063539Jy  sigma=1.259707
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.259707
! Fit after  self-cal, rms=0.063525Jy  sigma=1.259681
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.214 mas, bmaj=11.27 mas, bpa=-1.547 degrees
! Estimated noise=0.504857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269928 Jy
! Component: 100  -  total flux cleaned = 0.000317952 Jy
! Component: 150  -  total flux cleaned = 0.000305959 Jy
! Component: 200  -  total flux cleaned = 0.00027039 Jy
! Total flux subtracted in 200 components = 0.00027039 Jy
! Clean residual min=-0.001825 max=0.002212 Jy/beam
! Clean residual mean=-0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.196896 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.196896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063522Jy  sigma=1.259744
! Fit after  self-cal, rms=0.063523Jy  sigma=1.259734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.4465e-05 Jy
! Component: 100  -  total flux cleaned = -3.08616e-05 Jy
! Component: 150  -  total flux cleaned = -6.30267e-05 Jy
! Component: 200  -  total flux cleaned = -8.30933e-05 Jy
! Total flux subtracted in 200 components = -8.30933e-05 Jy
! Clean residual min=-0.001823 max=0.002226 Jy/beam
! Clean residual mean=-0.000000 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.196813 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 134 components and 0.196813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063522Jy  sigma=1.259780
! Fit after  self-cal, rms=0.063523Jy  sigma=1.259777
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.555 mas, bpa=-2.439 degrees
! Estimated noise=0.389605 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 7.555 at -2.439 degrees (North through East)
! Clean map  min=-0.0017362  max=0.13948 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.783 mas, bmaj=6.648 mas, bpa=-3.157 degrees
! Estimated noise=0.535187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10464 Jy
! Component: 100  -  total flux cleaned = 0.144873 Jy
! Component: 150  -  total flux cleaned = 0.165319 Jy
! Component: 200  -  total flux cleaned = 0.175845 Jy
! Total flux subtracted in 200 components = 0.175845 Jy
! Clean residual min=-0.003232 max=0.005136 Jy/beam
! Clean residual mean=0.000000 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.175845 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.175845 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.555 mas, bpa=-2.439 degrees
! Estimated noise=0.389605 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00801404 Jy
! Component: 100  -  total flux cleaned = 0.0123491 Jy
! Component: 150  -  total flux cleaned = 0.0151708 Jy
! Component: 200  -  total flux cleaned = 0.0172567 Jy
! Total flux subtracted in 200 components = 0.0172567 Jy
! Clean residual min=-0.002038 max=0.001827 Jy/beam
! Clean residual mean=0.000002 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.193101 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.193101 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.214 mas, bmaj=11.27 mas, bpa=-1.547 degrees
! Estimated noise=0.504857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202994 Jy
! Component: 100  -  total flux cleaned = 0.00283559 Jy
! Component: 150  -  total flux cleaned = 0.00323202 Jy
! Component: 200  -  total flux cleaned = 0.00340852 Jy
! Total flux subtracted in 200 components = 0.00340852 Jy
! Clean residual min=-0.001939 max=0.001976 Jy/beam
! Clean residual mean=0.000001 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.19651 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148538 Jy
! Component: 100  -  total flux cleaned = 0.000197839 Jy
! Component: 150  -  total flux cleaned = 0.000242046 Jy
! Component: 200  -  total flux cleaned = 0.000299525 Jy
! Total flux subtracted in 200 components = 0.000299525 Jy
! Clean residual min=-0.001893 max=0.002088 Jy/beam
! Clean residual mean=0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.196809 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 67 components and 0.196809 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.555 mas, bpa=-2.439 degrees
! Estimated noise=0.389605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259804 Jy
! Component: 100  -  total flux cleaned = 0.000337952 Jy
! Component: 150  -  total flux cleaned = 0.000272561 Jy
! Component: 200  -  total flux cleaned = 0.000240842 Jy
! Total flux subtracted in 200 components = 0.000240842 Jy
! Clean residual min=-0.001826 max=0.001772 Jy/beam
! Clean residual mean=-0.000000 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.19705 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.19705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063559Jy  sigma=1.260453
! Fit after  self-cal, rms=0.063554Jy  sigma=1.260363
wmodel J1834+0506_S_map.mod
! Writing 86 model components to file: J1834+0506_S_map.mod
wobs   J1834+0506_S_uvs.fits
! Writing UV FITS file: J1834+0506_S_uvs.fits
wwins  J1834+0506_S_map.win
! wwins: Wrote 3 windows to J1834+0506_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000199171 Jy
! Component: 100  -  total flux cleaned = -7.79849e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124321 Jy
! Component: 200  -  total flux cleaned = 0.000319245 Jy
! Component: 250  -  total flux cleaned = 0.000480511 Jy
! Component: 300  -  total flux cleaned = 0.000637244 Jy
! Component: 350  -  total flux cleaned = 0.000764413 Jy
! Component: 400  -  total flux cleaned = 0.000938347 Jy
! Component: 450  -  total flux cleaned = 0.00108388 Jy
! Component: 500  -  total flux cleaned = 0.00110772 Jy
! Component: 550  -  total flux cleaned = 0.00115457 Jy
! Component: 600  -  total flux cleaned = 0.00117752 Jy
! Component: 650  -  total flux cleaned = 0.00115486 Jy
! Component: 700  -  total flux cleaned = 0.00122108 Jy
! Component: 750  -  total flux cleaned = 0.00122107 Jy
! Component: 800  -  total flux cleaned = 0.00134962 Jy
! Component: 850  -  total flux cleaned = 0.00139129 Jy
! Component: 900  -  total flux cleaned = 0.00145384 Jy
! Component: 950  -  total flux cleaned = 0.00151549 Jy
! Component: 1000  -  total flux cleaned = 0.00159609 Jy
! Component: 1050  -  total flux cleaned = 0.00161607 Jy
! Component: 1100  -  total flux cleaned = 0.00171413 Jy
! Component: 1150  -  total flux cleaned = 0.00167525 Jy
! Component: 1200  -  total flux cleaned = 0.00171384 Jy
! Component: 1250  -  total flux cleaned = 0.00177064 Jy
! Component: 1300  -  total flux cleaned = 0.00188253 Jy
! Component: 1350  -  total flux cleaned = 0.00195574 Jy
! Component: 1400  -  total flux cleaned = 0.00191933 Jy
! Component: 1450  -  total flux cleaned = 0.00193727 Jy
! Component: 1500  -  total flux cleaned = 0.00200848 Jy
! Component: 1550  -  total flux cleaned = 0.00197323 Jy
! Component: 1600  -  total flux cleaned = 0.00197335 Jy
! Component: 1650  -  total flux cleaned = 0.00200775 Jy
! Component: 1700  -  total flux cleaned = 0.00204183 Jy
! Component: 1750  -  total flux cleaned = 0.00202502 Jy
! Component: 1800  -  total flux cleaned = 0.00204169 Jy
! Component: 1850  -  total flux cleaned = 0.00209128 Jy
! Component: 1900  -  total flux cleaned = 0.00199265 Jy
! Component: 1950  -  total flux cleaned = 0.00207429 Jy
! Component: 2000  -  total flux cleaned = 0.00205804 Jy
! Component: 2050  -  total flux cleaned = 0.00207408 Jy
! Component: 2100  -  total flux cleaned = 0.00208978 Jy
! Component: 2150  -  total flux cleaned = 0.00210563 Jy
! Component: 2200  -  total flux cleaned = 0.00209024 Jy
! Component: 2250  -  total flux cleaned = 0.00213638 Jy
! Component: 2300  -  total flux cleaned = 0.00218225 Jy
! Component: 2350  -  total flux cleaned = 0.00219749 Jy
! Component: 2400  -  total flux cleaned = 0.00221234 Jy
! Component: 2450  -  total flux cleaned = 0.00224196 Jy
! Component: 2500  -  total flux cleaned = 0.00224189 Jy
! Component: 2550  -  total flux cleaned = 0.0022858 Jy
! Component: 2600  -  total flux cleaned = 0.00228573 Jy
! Component: 2650  -  total flux cleaned = 0.0022713 Jy
! Component: 2700  -  total flux cleaned = 0.00238536 Jy
! Component: 2750  -  total flux cleaned = 0.00231448 Jy
! Component: 2800  -  total flux cleaned = 0.00231447 Jy
! Component: 2850  -  total flux cleaned = 0.00238406 Jy
! Component: 2900  -  total flux cleaned = 0.00237024 Jy
! Component: 2950  -  total flux cleaned = 0.00234274 Jy
! Component: 3000  -  total flux cleaned = 0.00228832 Jy
! Component: 3050  -  total flux cleaned = 0.00231546 Jy
! Component: 3100  -  total flux cleaned = 0.0023691 Jy
! Component: 3150  -  total flux cleaned = 0.0023558 Jy
! Component: 3200  -  total flux cleaned = 0.00239567 Jy
! Component: 3250  -  total flux cleaned = 0.00236947 Jy
! Component: 3300  -  total flux cleaned = 0.00238263 Jy
! Component: 3350  -  total flux cleaned = 0.00243428 Jy
! Component: 3400  -  total flux cleaned = 0.00237013 Jy
! Component: 3450  -  total flux cleaned = 0.00238296 Jy
! Component: 3500  -  total flux cleaned = 0.00240833 Jy
! Component: 3550  -  total flux cleaned = 0.00235809 Jy
! Component: 3600  -  total flux cleaned = 0.0023458 Jy
! Component: 3650  -  total flux cleaned = 0.00232101 Jy
! Component: 3700  -  total flux cleaned = 0.00233337 Jy
! Component: 3750  -  total flux cleaned = 0.00228454 Jy
! Component: 3800  -  total flux cleaned = 0.00222386 Jy
! Component: 3850  -  total flux cleaned = 0.00226002 Jy
! Component: 3900  -  total flux cleaned = 0.00222406 Jy
! Component: 3950  -  total flux cleaned = 0.00225981 Jy
! Component: 4000  -  total flux cleaned = 0.00216504 Jy
! Component: 4050  -  total flux cleaned = 0.00212979 Jy
! Total flux subtracted in 4096 components = 0.00212983 Jy
! Clean residual min=-0.000716 max=0.000731 Jy/beam
! Clean residual mean=-0.000002 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.19918 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 384 components and 0.19918 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1834+0506_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 7.555 at -2.439 degrees (North through East)
! Clean map  min=-0.001332  max=0.1394 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1834+0506_S_map.fits
wmodel /vlbi/uf001/uva//J1834+0506_S_map.mod
! Writing 384 model components to file: /vlbi/uf001/uva//J1834+0506_S_map.mod
wobs   /vlbi/uf001/uva//J1834+0506_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1834+0506_S_uvs.fits
wwins  /vlbi/uf001/uva//J1834+0506_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1834+0506_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213135 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.458678 0.458678 0.917356 1.83471 3.66943 7.33885 14.6777 29.3554 58.7108
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  654.053 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1834+0506_S_dfm.log closed on Mon Jan 14 04:42:34 2019