! Started logfile: /vlbi/uf001/uva//J1828-0530_S_dfm.log on Mon Jan 14 04:39:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1828-0530_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1828-0530_S_uva.fits ! AN table 1: 109 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.713048 visibilities/baseline/integration-bin. ! Found source: J1828-0530 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 8394 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1828-0530_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001511Jy sigma=18.321648 ! Fit after self-cal, rms=0.879950Jy sigma=16.147313 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.769 mas, bmaj=10.22 mas, bpa=20.27 degrees ! Estimated noise=0.775153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091449 Jy ! Component: 100 - total flux cleaned = 0.140407 Jy ! Total flux subtracted in 100 components = 0.140407 Jy ! Clean residual min=-0.020714 max=0.038014 Jy/beam ! Clean residual mean=0.000145 rms=0.008177 Jy/beam ! Combined flux in latest and established models = 0.140407 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.140407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.161076Jy sigma=2.868081 ! Fit after self-cal, rms=0.160252Jy sigma=2.851753 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.783 mas, bmaj=11.75 mas, bpa=18.44 degrees ! Estimated noise=0.434376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059693 Jy ! Component: 100 - total flux cleaned = 0.097734 Jy ! Component: 150 - total flux cleaned = 0.124097 Jy ! Component: 200 - total flux cleaned = 0.142874 Jy ! Total flux subtracted in 200 components = 0.142874 Jy ! Clean residual min=-0.019399 max=0.038576 Jy/beam ! Clean residual mean=0.000066 rms=0.007857 Jy/beam ! Combined flux in latest and established models = 0.283281 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 103 components and 0.283281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.132663Jy sigma=2.343629 ! Fit after self-cal, rms=0.131645Jy sigma=2.317744 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.783 x 11.75 at 18.44 degrees (North through East) ! Clean map min=-0.020086 max=0.10961 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.79 HN 2.17 KP 0.86 ! LA 0.78 NL 0.98 OV 1.60 PT 0.90 ! SC 1.30 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.80 HN 1.95 KP 0.84 ! LA 0.80 NL 0.98 OV 1.82 PT 0.92 ! SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.76 HN 1.82 KP 0.96 ! LA 0.89 NL 0.97 OV 2.39 PT 0.92 ! SC 1.12 ! ! ! Fit before self-cal, rms=0.131645Jy sigma=2.317744 ! Fit after self-cal, rms=0.160159Jy sigma=1.992941 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.533 mas, bmaj=12.87 mas, bpa=21.85 degrees ! Estimated noise=0.500517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933129 Jy ! Component: 100 - total flux cleaned = 0.0106186 Jy ! Component: 150 - total flux cleaned = 0.0114543 Jy ! Component: 200 - total flux cleaned = 0.0121938 Jy ! Total flux subtracted in 200 components = 0.0121938 Jy ! Clean residual min=-0.022317 max=0.022290 Jy/beam ! Clean residual mean=-0.000009 rms=0.005949 Jy/beam ! Combined flux in latest and established models = 0.295475 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.295475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.159077Jy sigma=1.977294 ! Fit after self-cal, rms=0.162441Jy sigma=1.965554 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.162441Jy sigma=1.965554 ! Fit after self-cal, rms=0.185782Jy sigma=1.436134 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.543 mas, bmaj=12.92 mas, bpa=23.57 degrees ! Estimated noise=0.504798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415925 Jy ! Component: 100 - total flux cleaned = -0.000419249 Jy ! Component: 150 - total flux cleaned = -0.000327326 Jy ! Component: 200 - total flux cleaned = -0.000241976 Jy ! Total flux subtracted in 200 components = -0.000241976 Jy ! Clean residual min=-0.012786 max=0.015518 Jy/beam ! Clean residual mean=0.000063 rms=0.003593 Jy/beam ! Combined flux in latest and established models = 0.295233 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 0.295233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.185453Jy sigma=1.434527 ! Fit after self-cal, rms=0.187737Jy sigma=1.427858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314049 Jy ! Component: 100 - total flux cleaned = -0.000141356 Jy ! Component: 150 - total flux cleaned = 1.88694e-05 Jy ! Component: 200 - total flux cleaned = 0.000169776 Jy ! Total flux subtracted in 200 components = 0.000169776 Jy ! Clean residual min=-0.012852 max=0.014990 Jy/beam ! Clean residual mean=0.000062 rms=0.003586 Jy/beam ! Combined flux in latest and established models = 0.295402 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.295402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.187560Jy sigma=1.426877 ! Fit after self-cal, rms=0.187579Jy sigma=1.426587 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.187579Jy sigma=1.426587 ! Fit after self-cal, rms=0.195352Jy sigma=1.423573 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.584 mas, bmaj=13 mas, bpa=24.26 degrees ! Estimated noise=0.50643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178355 Jy ! Component: 100 - total flux cleaned = -0.00179052 Jy ! Component: 150 - total flux cleaned = -0.00170758 Jy ! Component: 200 - total flux cleaned = -0.00155238 Jy ! Total flux subtracted in 200 components = -0.00155238 Jy ! Clean residual min=-0.012877 max=0.015830 Jy/beam ! Clean residual mean=0.000060 rms=0.003562 Jy/beam ! Combined flux in latest and established models = 0.29385 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.29385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.195137Jy sigma=1.422477 ! Fit after self-cal, rms=0.195812Jy sigma=1.421931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-96.5, -54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00929071 Jy ! Component: 100 - total flux cleaned = 0.00777863 Jy ! Component: 150 - total flux cleaned = 0.00629067 Jy ! Component: 200 - total flux cleaned = 0.00462141 Jy ! Total flux subtracted in 200 components = 0.00462141 Jy ! Clean residual min=-0.011878 max=0.012386 Jy/beam ! Clean residual mean=0.000045 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 0.298471 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 169 components and 0.298471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193625Jy sigma=1.407583 ! Fit after self-cal, rms=0.193378Jy sigma=1.403377 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193378Jy sigma=1.403377 ! Fit after self-cal, rms=0.199257Jy sigma=1.396904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.853 mas, bmaj=15.88 mas, bpa=14.82 degrees ! Estimated noise=0.493362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149608 Jy ! Component: 100 - total flux cleaned = 5.22248e-05 Jy ! Component: 150 - total flux cleaned = -0.00166587 Jy ! Component: 200 - total flux cleaned = -0.00313389 Jy ! Total flux subtracted in 200 components = -0.00313389 Jy ! Clean residual min=-0.012184 max=0.013337 Jy/beam ! Clean residual mean=0.000059 rms=0.003736 Jy/beam ! Combined flux in latest and established models = 0.295337 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 196 components and 0.295337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.198300Jy sigma=1.398308 ! Fit after self-cal, rms=0.198705Jy sigma=1.396663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00090209 Jy ! Component: 100 - total flux cleaned = -0.00169061 Jy ! Component: 150 - total flux cleaned = -0.00181254 Jy ! Component: 200 - total flux cleaned = -0.00192465 Jy ! Total flux subtracted in 200 components = -0.00192465 Jy ! Clean residual min=-0.012495 max=0.013497 Jy/beam ! Clean residual mean=0.000063 rms=0.003760 Jy/beam ! Combined flux in latest and established models = 0.293413 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 215 components and 0.293413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.198292Jy sigma=1.397452 ! Fit after self-cal, rms=0.198256Jy sigma=1.397015 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=6.641 mas, bmaj=13.12 mas, bpa=24.22 degrees ! Estimated noise=0.502185 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.641 x 13.12 at 24.22 degrees (North through East) ! Clean map min=-0.012501 max=0.12262 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.297 mas, bmaj=11.27 mas, bpa=25.38 degrees ! Estimated noise=0.981941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109476 Jy ! Component: 100 - total flux cleaned = 0.166338 Jy ! Component: 150 - total flux cleaned = 0.200777 Jy ! Component: 200 - total flux cleaned = 0.224609 Jy ! Total flux subtracted in 200 components = 0.224609 Jy ! Clean residual min=-0.021516 max=0.027646 Jy/beam ! Clean residual mean=0.000101 rms=0.005509 Jy/beam ! Combined flux in latest and established models = 0.224609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.224609 Jy ! Inverting map and beam ! Estimated beam: bmin=6.641 mas, bmaj=13.12 mas, bpa=24.22 degrees ! Estimated noise=0.502185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, 47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309132 Jy ! Component: 100 - total flux cleaned = 0.0486804 Jy ! Component: 150 - total flux cleaned = 0.058395 Jy ! Component: 200 - total flux cleaned = 0.0599874 Jy ! Total flux subtracted in 200 components = 0.0599874 Jy ! Clean residual min=-0.014652 max=0.012663 Jy/beam ! Clean residual mean=0.000062 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 0.284596 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 127 components and 0.284596 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.853 mas, bmaj=15.88 mas, bpa=14.82 degrees ! Estimated noise=0.493362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464211 Jy ! Component: 100 - total flux cleaned = 0.00398642 Jy ! Component: 150 - total flux cleaned = 0.0034015 Jy ! Component: 200 - total flux cleaned = 0.00287145 Jy ! Total flux subtracted in 200 components = 0.00287145 Jy ! Clean residual min=-0.012941 max=0.012702 Jy/beam ! Clean residual mean=0.000067 rms=0.003677 Jy/beam ! Combined flux in latest and established models = 0.287468 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000479911 Jy ! Component: 100 - total flux cleaned = -0.00092746 Jy ! Component: 150 - total flux cleaned = -0.00133457 Jy ! Component: 200 - total flux cleaned = -0.0017164 Jy ! Total flux subtracted in 200 components = -0.0017164 Jy ! Clean residual min=-0.011536 max=0.012306 Jy/beam ! Clean residual mean=0.000064 rms=0.003605 Jy/beam ! Combined flux in latest and established models = 0.285751 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 181 components and 0.285751 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.641 mas, bmaj=13.12 mas, bpa=24.22 degrees ! Estimated noise=0.502185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000858675 Jy ! Component: 100 - total flux cleaned = -7.20861e-05 Jy ! Component: 150 - total flux cleaned = -0.00129458 Jy ! Component: 200 - total flux cleaned = -0.00244729 Jy ! Total flux subtracted in 200 components = -0.00244729 Jy ! Clean residual min=-0.010719 max=0.011290 Jy/beam ! Clean residual mean=0.000051 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 0.283304 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 207 components and 0.283304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.197367Jy sigma=1.380494 ! Fit after self-cal, rms=0.196265Jy sigma=1.369869 wmodel J1828-0530_S_map.mod ! Writing 207 model components to file: J1828-0530_S_map.mod wobs J1828-0530_S_uvs.fits ! Writing UV FITS file: J1828-0530_S_uvs.fits wwins J1828-0530_S_map.win ! wwins: Wrote 3 windows to J1828-0530_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072308 Jy ! Component: 100 - total flux cleaned = 0.00143397 Jy ! Component: 150 - total flux cleaned = 0.00293484 Jy ! Component: 200 - total flux cleaned = 0.00499272 Jy ! Component: 250 - total flux cleaned = 0.00682436 Jy ! Component: 300 - total flux cleaned = 0.00815255 Jy ! Component: 350 - total flux cleaned = 0.00915536 Jy ! Component: 400 - total flux cleaned = 0.00985106 Jy ! Component: 450 - total flux cleaned = 0.0105298 Jy ! Component: 500 - total flux cleaned = 0.0113246 Jy ! Component: 550 - total flux cleaned = 0.0117107 Jy ! Component: 600 - total flux cleaned = 0.0120865 Jy ! Component: 650 - total flux cleaned = 0.0124541 Jy ! Component: 700 - total flux cleaned = 0.0130606 Jy ! Component: 750 - total flux cleaned = 0.0132988 Jy ! Component: 800 - total flux cleaned = 0.0143456 Jy ! Component: 850 - total flux cleaned = 0.0147962 Jy ! Component: 900 - total flux cleaned = 0.015016 Jy ! Component: 950 - total flux cleaned = 0.0155617 Jy ! Component: 1000 - total flux cleaned = 0.0154519 Jy ! Component: 1050 - total flux cleaned = 0.015874 Jy ! Component: 1100 - total flux cleaned = 0.0161848 Jy ! Component: 1150 - total flux cleaned = 0.0163897 Jy ! Component: 1200 - total flux cleaned = 0.0165906 Jy ! Component: 1250 - total flux cleaned = 0.0166906 Jy ! Component: 1300 - total flux cleaned = 0.0168854 Jy ! Component: 1350 - total flux cleaned = 0.0169786 Jy ! Component: 1400 - total flux cleaned = 0.0167897 Jy ! Component: 1450 - total flux cleaned = 0.0167885 Jy ! Component: 1500 - total flux cleaned = 0.0168796 Jy ! Component: 1550 - total flux cleaned = 0.0168793 Jy ! Component: 1600 - total flux cleaned = 0.016881 Jy ! Component: 1650 - total flux cleaned = 0.0168795 Jy ! Component: 1700 - total flux cleaned = 0.0165347 Jy ! Component: 1750 - total flux cleaned = 0.01628 Jy ! Component: 1800 - total flux cleaned = 0.0161969 Jy ! Component: 1850 - total flux cleaned = 0.01587 Jy ! Component: 1900 - total flux cleaned = 0.0160331 Jy ! Component: 1950 - total flux cleaned = 0.0160338 Jy ! Component: 2000 - total flux cleaned = 0.0162701 Jy ! Component: 2050 - total flux cleaned = 0.0163474 Jy ! Component: 2100 - total flux cleaned = 0.0163473 Jy ! Component: 2150 - total flux cleaned = 0.0164993 Jy ! Component: 2200 - total flux cleaned = 0.0163505 Jy ! Component: 2250 - total flux cleaned = 0.0166483 Jy ! Component: 2300 - total flux cleaned = 0.0167944 Jy ! Component: 2350 - total flux cleaned = 0.0166517 Jy ! Component: 2400 - total flux cleaned = 0.0169367 Jy ! Component: 2450 - total flux cleaned = 0.0171478 Jy ! Component: 2500 - total flux cleaned = 0.0168686 Jy ! Component: 2550 - total flux cleaned = 0.0167996 Jy ! Component: 2600 - total flux cleaned = 0.016733 Jy ! Component: 2650 - total flux cleaned = 0.0166657 Jy ! Component: 2700 - total flux cleaned = 0.0166666 Jy ! Component: 2750 - total flux cleaned = 0.0166686 Jy ! Component: 2800 - total flux cleaned = 0.0167342 Jy ! Component: 2850 - total flux cleaned = 0.016991 Jy ! Component: 2900 - total flux cleaned = 0.0169908 Jy ! Component: 2950 - total flux cleaned = 0.0166767 Jy ! Component: 3000 - total flux cleaned = 0.0168009 Jy ! Component: 3050 - total flux cleaned = 0.0167393 Jy ! Component: 3100 - total flux cleaned = 0.0166173 Jy ! Component: 3150 - total flux cleaned = 0.0165556 Jy ! Component: 3200 - total flux cleaned = 0.0163754 Jy ! Component: 3250 - total flux cleaned = 0.0162569 Jy ! Component: 3300 - total flux cleaned = 0.0161389 Jy ! Component: 3350 - total flux cleaned = 0.0160222 Jy ! Component: 3400 - total flux cleaned = 0.0159077 Jy ! Component: 3450 - total flux cleaned = 0.0158507 Jy ! Component: 3500 - total flux cleaned = 0.0156814 Jy ! Component: 3550 - total flux cleaned = 0.0156248 Jy ! Component: 3600 - total flux cleaned = 0.015791 Jy ! Component: 3650 - total flux cleaned = 0.0155708 Jy ! Component: 3700 - total flux cleaned = 0.0156256 Jy ! Component: 3750 - total flux cleaned = 0.0157339 Jy ! Component: 3800 - total flux cleaned = 0.0156808 Jy ! Component: 3850 - total flux cleaned = 0.0159455 Jy ! Component: 3900 - total flux cleaned = 0.0161561 Jy ! Component: 3950 - total flux cleaned = 0.0163126 Jy ! Component: 4000 - total flux cleaned = 0.0164166 Jy ! Component: 4050 - total flux cleaned = 0.0166223 Jy ! Total flux subtracted in 4096 components = 0.0167241 Jy ! Clean residual min=-0.002832 max=0.002691 Jy/beam ! Clean residual mean=0.000017 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.300028 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 528 components and 0.300028 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1828-0530_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.641 x 13.12 at 24.22 degrees (North through East) ! Clean map min=-0.010424 max=0.12148 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1828-0530_S_map.fits wmodel /vlbi/uf001/uva//J1828-0530_S_map.mod ! Writing 528 model components to file: /vlbi/uf001/uva//J1828-0530_S_map.mod wobs /vlbi/uf001/uva//J1828-0530_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1828-0530_S_uvs.fits wwins /vlbi/uf001/uva//J1828-0530_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1828-0530_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.121476 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00115657 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.85628 2.85628 5.71255 11.4251 22.8502 45.7004 91.4008 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.121 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 105.031 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1828-0530_S_dfm.log closed on Mon Jan 14 04:39:19 2019