! Started logfile: /vlbi/uf001/uvm//J1824+5651_X_b_dfm.log on Sun Jan 13 22:14:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1824+5651_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1824+5651_X_b_uvm.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! AN table 2: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.852525 visibilities/baseline/integration-bin. ! Found source: J1824+5651 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 10128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1824+5651_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.218719Jy sigma=21.234402 ! Fit after self-cal, rms=0.381990Jy sigma=6.764362 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6968 mas, bmaj=1.107 mas, bpa=-19.34 degrees ! Estimated noise=0.647068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.495262 Jy ! Component: 100 - total flux cleaned = 0.624059 Jy ! Total flux subtracted in 100 components = 0.624059 Jy ! Clean residual min=-0.027409 max=0.053262 Jy/beam ! Clean residual mean=-0.000004 rms=0.005486 Jy/beam ! Combined flux in latest and established models = 0.624059 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.624059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193086Jy sigma=3.223916 ! Fit after self-cal, rms=0.192979Jy sigma=3.222254 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553737 Jy ! Component: 100 - total flux cleaned = 0.0830559 Jy ! Total flux subtracted in 100 components = 0.0830559 Jy ! Clean residual min=-0.023423 max=0.045323 Jy/beam ! Clean residual mean=-0.000005 rms=0.004927 Jy/beam ! Combined flux in latest and established models = 0.707115 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.707115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169603Jy sigma=2.839094 ! Fit after self-cal, rms=0.169440Jy sigma=2.836580 ! Inverting map ! Added new window around map position (-0.8, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412345 Jy ! Component: 100 - total flux cleaned = 0.0627936 Jy ! Total flux subtracted in 100 components = 0.0627936 Jy ! Clean residual min=-0.023313 max=0.029144 Jy/beam ! Clean residual mean=-0.000005 rms=0.004563 Jy/beam ! Combined flux in latest and established models = 0.769908 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.769908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154931Jy sigma=2.596338 ! Fit after self-cal, rms=0.153678Jy sigma=2.572553 ! Inverting map ! Added new window around map position (-2.2, -11.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255507 Jy ! Component: 100 - total flux cleaned = 0.0422863 Jy ! Total flux subtracted in 100 components = 0.0422863 Jy ! Clean residual min=-0.021025 max=0.025791 Jy/beam ! Clean residual mean=-0.000005 rms=0.004345 Jy/beam ! Combined flux in latest and established models = 0.812195 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.812195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149105Jy sigma=2.495639 ! Fit after self-cal, rms=0.148865Jy sigma=2.490777 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.862 mas, bmaj=1.351 mas, bpa=-19.76 degrees ! Estimated noise=0.467295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296543 Jy ! Component: 100 - total flux cleaned = 0.0475055 Jy ! Component: 150 - total flux cleaned = 0.0572912 Jy ! Component: 200 - total flux cleaned = 0.0644439 Jy ! Total flux subtracted in 200 components = 0.0644439 Jy ! Clean residual min=-0.017867 max=0.024944 Jy/beam ! Clean residual mean=-0.000027 rms=0.004437 Jy/beam ! Combined flux in latest and established models = 0.876639 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.876638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140872Jy sigma=2.358708 ! Fit after self-cal, rms=0.140504Jy sigma=2.352489 ! Inverting map ! Added new window around map position (-10.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198391 Jy ! Component: 100 - total flux cleaned = 0.0215234 Jy ! Component: 150 - total flux cleaned = 0.0229893 Jy ! Component: 200 - total flux cleaned = 0.0229946 Jy ! Total flux subtracted in 200 components = 0.0229946 Jy ! Clean residual min=-0.017473 max=0.021682 Jy/beam ! Clean residual mean=-0.000015 rms=0.004221 Jy/beam ! Combined flux in latest and established models = 0.899633 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.899633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135451Jy sigma=2.267906 ! Fit after self-cal, rms=0.135271Jy sigma=2.264085 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.862 x 1.351 at -19.76 degrees (North through East) ! Clean map min=-0.01658 max=0.64202 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.90 KP 1.03 ! LA 1.01 MK 1.01 NL 1.01 OV 0.91 ! PT 0.95 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.25 KP 1.00 LA 0.98 ! MK 0.99 NL 1.05 OV 0.91 PT 0.92 ! SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.91 KP 1.04 ! LA 1.00 MK 1.03 NL 1.01 OV 0.92 ! PT 0.95 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 1.32 KP 0.98 LA 1.02 ! MK 0.98 NL 1.02 OV 0.89 PT 0.93 ! SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.91 KP 1.03 ! LA 1.00 MK 1.00 NL 1.02 OV 0.92 ! PT 0.96 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.28 KP 1.01 LA 1.00 ! MK 0.97 NL 1.05 OV 0.90 PT 0.92 ! SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.90 KP 1.02 ! LA 1.00 MK 1.03 NL 1.03 OV 0.91 ! PT 0.95 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.24 KP 1.02 LA 1.01 ! MK 0.98 NL 1.04 OV 0.90 PT 0.92 ! SC 1.10 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.90 KP 1.04 ! LA 0.99 MK 1.02 NL 1.02 OV 0.93 ! PT 0.94 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 1.24 KP 1.02 LA 1.00 ! MK 0.97 NL 1.05 OV 0.89 PT 0.94 ! SC 1.13 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.89 KP 1.05 ! LA 1.00 MK 1.01 NL 1.03 OV 0.91 ! PT 0.95 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.24 KP 1.03 LA 1.00 ! MK 0.98 NL 1.04 OV 0.89 PT 0.92 ! SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.89 KP 1.05 ! LA 1.00 MK 1.04 NL 1.01 OV 0.92 ! PT 0.95 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.24 KP 1.02 LA 0.99 ! MK 0.99 NL 1.05 OV 0.88 PT 0.93 ! SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.90 KP 1.04 ! LA 1.00 MK 1.03 NL 1.02 OV 0.91 ! PT 0.94 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.23 KP 1.01 LA 0.98 ! MK 0.99 NL 1.03 OV 0.87 PT 0.95 ! SC 1.12 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.90 KP 1.02 ! LA 1.00 MK 1.02 NL 1.03 OV 0.92 ! PT 0.95 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.26 KP 1.00 LA 1.01 ! MK 0.98 NL 1.02 OV 0.90 PT 0.93 ! SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.89 KP 1.05 ! LA 1.01 MK 1.02 NL 1.00 OV 0.91 ! PT 0.95 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.23 KP 1.00 LA 0.99 ! MK 0.99 NL 1.03 OV 0.90 PT 0.94 ! SC 1.09 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.92 KP 1.06 ! LA 0.99 MK 1.02 NL 1.01 OV 0.91 ! PT 0.93 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.28 KP 1.02 LA 0.99 ! MK 0.99 NL 1.03 OV 0.89 PT 0.92 ! SC 1.12 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.92 KP 1.05 ! LA 1.01 MK 1.02 NL 1.00 OV 0.91 ! PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.29 KP 1.01 LA 0.97 ! MK 0.97 NL 1.04 OV 0.89 PT 0.94 ! SC 1.11 ! ! ! Fit before self-cal, rms=0.135271Jy sigma=2.264085 ! Fit after self-cal, rms=0.130664Jy sigma=1.935533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8656 mas, bmaj=1.377 mas, bpa=-20.52 degrees ! Estimated noise=0.467788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329632 Jy ! Component: 100 - total flux cleaned = -0.00689334 Jy ! Component: 150 - total flux cleaned = -0.0143794 Jy ! Component: 200 - total flux cleaned = -0.0199997 Jy ! Total flux subtracted in 200 components = -0.0199997 Jy ! Clean residual min=-0.015516 max=0.016548 Jy/beam ! Clean residual mean=0.000011 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.879633 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 0.879633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123838Jy sigma=1.843218 ! Fit after self-cal, rms=0.123762Jy sigma=1.840674 ! Inverting map ! Added new window around map position (-1.8, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104566 Jy ! Component: 100 - total flux cleaned = 0.0104763 Jy ! Component: 150 - total flux cleaned = 0.0070408 Jy ! Component: 200 - total flux cleaned = 0.00505284 Jy ! Total flux subtracted in 200 components = 0.00505284 Jy ! Clean residual min=-0.014658 max=0.015016 Jy/beam ! Clean residual mean=0.000013 rms=0.003013 Jy/beam ! Combined flux in latest and established models = 0.884686 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 98 components and 0.884687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119527Jy sigma=1.786066 ! Fit after self-cal, rms=0.119368Jy sigma=1.783013 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119368Jy sigma=1.783013 ! Fit after self-cal, rms=0.086176Jy sigma=1.159646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8641 mas, bmaj=1.371 mas, bpa=-18.41 degrees ! Estimated noise=0.471401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117251 Jy ! Component: 100 - total flux cleaned = -0.0203983 Jy ! Component: 150 - total flux cleaned = -0.0264232 Jy ! Component: 200 - total flux cleaned = -0.0293067 Jy ! Total flux subtracted in 200 components = -0.0293067 Jy ! Clean residual min=-0.007150 max=0.008313 Jy/beam ! Clean residual mean=0.000012 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.85538 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 0.85538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083760Jy sigma=1.101499 ! Fit after self-cal, rms=0.083850Jy sigma=1.100040 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00592816 Jy ! Component: 100 - total flux cleaned = 0.00642598 Jy ! Component: 150 - total flux cleaned = 0.00642266 Jy ! Component: 200 - total flux cleaned = 0.00622315 Jy ! Total flux subtracted in 200 components = 0.00622315 Jy ! Clean residual min=-0.006323 max=0.005059 Jy/beam ! Clean residual mean=0.000011 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.861603 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 133 components and 0.861603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082635Jy sigma=1.069664 ! Fit after self-cal, rms=0.082601Jy sigma=1.069056 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082601Jy sigma=1.069056 ! Fit after self-cal, rms=0.083461Jy sigma=1.060374 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8654 mas, bmaj=1.374 mas, bpa=-18.42 degrees ! Estimated noise=0.470521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00695785 Jy ! Component: 100 - total flux cleaned = -0.0110074 Jy ! Component: 150 - total flux cleaned = -0.01201 Jy ! Component: 200 - total flux cleaned = -0.0125615 Jy ! Total flux subtracted in 200 components = -0.0125615 Jy ! Clean residual min=-0.005072 max=0.004601 Jy/beam ! Clean residual mean=0.000010 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.849041 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 140 components and 0.849041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082468Jy sigma=1.035710 ! Fit after self-cal, rms=0.082471Jy sigma=1.035611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02032e-07 Jy ! Component: 100 - total flux cleaned = 0.000165503 Jy ! Component: 150 - total flux cleaned = 1.29528e-05 Jy ! Component: 200 - total flux cleaned = 1.5759e-05 Jy ! Total flux subtracted in 200 components = 1.5759e-05 Jy ! Clean residual min=-0.004623 max=0.004164 Jy/beam ! Clean residual mean=0.000010 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.849057 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 147 components and 0.849057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081963Jy sigma=1.022442 ! Fit after self-cal, rms=0.081959Jy sigma=1.022370 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081959Jy sigma=1.022370 ! Fit after self-cal, rms=0.082732Jy sigma=1.018912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.15 mas, bmaj=2.487 mas, bpa=-34.47 degrees ! Estimated noise=0.633841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156219 Jy ! Component: 100 - total flux cleaned = -0.00271666 Jy ! Component: 150 - total flux cleaned = -0.00391046 Jy ! Component: 200 - total flux cleaned = -0.00481405 Jy ! Total flux subtracted in 200 components = -0.00481405 Jy ! Clean residual min=-0.004775 max=0.005201 Jy/beam ! Clean residual mean=0.000024 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.844243 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 164 components and 0.844243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082404Jy sigma=1.009491 ! Fit after self-cal, rms=0.082402Jy sigma=1.009184 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-46.2, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451674 Jy ! Component: 100 - total flux cleaned = 0.00607905 Jy ! Component: 150 - total flux cleaned = 0.00706646 Jy ! Component: 200 - total flux cleaned = 0.00780152 Jy ! Total flux subtracted in 200 components = 0.00780152 Jy ! Clean residual min=-0.004201 max=0.003875 Jy/beam ! Clean residual mean=0.000024 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.852045 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 193 components and 0.852045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082211Jy sigma=1.003791 ! Fit after self-cal, rms=0.082207Jy sigma=1.003514 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8662 mas, bmaj=1.375 mas, bpa=-18.4 degrees ! Estimated noise=0.469806 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8662 x 1.375 at -18.4 degrees (North through East) ! Clean map min=-0.0076873 max=0.64471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082207Jy sigma=1.003514 ! Fit after self-cal, rms=0.082761Jy sigma=0.938881 ! Inverting map and beam ! Estimated beam: bmin=0.8666 mas, bmaj=1.376 mas, bpa=-18.49 degrees ! Estimated noise=0.469093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00422559 Jy ! Component: 100 - total flux cleaned = -0.00580151 Jy ! Component: 150 - total flux cleaned = -0.0064483 Jy ! Component: 200 - total flux cleaned = -0.00668816 Jy ! Total flux subtracted in 200 components = -0.00668816 Jy ! Clean residual min=-0.003221 max=0.003758 Jy/beam ! Clean residual mean=0.000006 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.845357 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 199 components and 0.845357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082330Jy sigma=0.928096 ! Fit after self-cal, rms=0.082321Jy sigma=0.927945 ! Inverting map ! Added new window around map position (11.2, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217602 Jy ! Component: 100 - total flux cleaned = 0.00262909 Jy ! Component: 150 - total flux cleaned = 0.00273451 Jy ! Component: 200 - total flux cleaned = 0.00283438 Jy ! Total flux subtracted in 200 components = 0.00283438 Jy ! Clean residual min=-0.003273 max=0.003065 Jy/beam ! Clean residual mean=0.000004 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.848191 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 211 components and 0.848191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081987Jy sigma=0.920585 ! Fit after self-cal, rms=0.081972Jy sigma=0.920382 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081972Jy sigma=0.920382 ! Fit after self-cal, rms=0.082361Jy sigma=0.918956 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.698 mas, bmaj=1.118 mas, bpa=-18.68 degrees ! Estimated noise=0.653792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.499879 Jy ! Component: 100 - total flux cleaned = 0.629643 Jy ! Component: 150 - total flux cleaned = 0.69239 Jy ! Component: 200 - total flux cleaned = 0.728503 Jy ! Total flux subtracted in 200 components = 0.728503 Jy ! Clean residual min=-0.009641 max=0.018337 Jy/beam ! Clean residual mean=0.000000 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.728503 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.728503 Jy ! Inverting map and beam ! Estimated beam: bmin=0.867 mas, bmaj=1.376 mas, bpa=-18.43 degrees ! Estimated noise=0.468602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263749 Jy ! Component: 100 - total flux cleaned = 0.0432952 Jy ! Component: 150 - total flux cleaned = 0.05548 Jy ! Component: 200 - total flux cleaned = 0.065178 Jy ! Total flux subtracted in 200 components = 0.065178 Jy ! Clean residual min=-0.006108 max=0.009093 Jy/beam ! Clean residual mean=-0.000004 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.793681 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.793681 Jy ! Inverting map ! Added new window around map position (-1.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742189 Jy ! Component: 100 - total flux cleaned = 0.0128834 Jy ! Component: 150 - total flux cleaned = 0.016725 Jy ! Component: 200 - total flux cleaned = 0.0197295 Jy ! Total flux subtracted in 200 components = 0.0197295 Jy ! Clean residual min=-0.005508 max=0.006049 Jy/beam ! Clean residual mean=0.000003 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.813411 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.813411 Jy ! Inverting map ! Added new window around map position (-1.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341462 Jy ! Component: 100 - total flux cleaned = 0.00520173 Jy ! Component: 150 - total flux cleaned = 0.0066619 Jy ! Component: 200 - total flux cleaned = 0.0078603 Jy ! Total flux subtracted in 200 components = 0.0078603 Jy ! Clean residual min=-0.004898 max=0.004283 Jy/beam ! Clean residual mean=0.000005 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.821271 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 73 components and 0.821271 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=2.488 mas, bpa=-34.43 degrees ! Estimated noise=0.63105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572488 Jy ! Component: 100 - total flux cleaned = 0.00887212 Jy ! Component: 150 - total flux cleaned = 0.0118281 Jy ! Component: 200 - total flux cleaned = 0.0139322 Jy ! Total flux subtracted in 200 components = 0.0139322 Jy ! Clean residual min=-0.003705 max=0.003509 Jy/beam ! Clean residual mean=0.000013 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.835203 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168784 Jy ! Component: 100 - total flux cleaned = 0.00302457 Jy ! Component: 150 - total flux cleaned = 0.00406996 Jy ! Component: 200 - total flux cleaned = 0.00487132 Jy ! Total flux subtracted in 200 components = 0.00487132 Jy ! Clean residual min=-0.003208 max=0.003222 Jy/beam ! Clean residual mean=0.000013 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.840074 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 128 components and 0.840074 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.867 mas, bmaj=1.376 mas, bpa=-18.43 degrees ! Estimated noise=0.468602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010377 Jy ! Component: 100 - total flux cleaned = -0.00117851 Jy ! Component: 150 - total flux cleaned = -0.0011788 Jy ! Component: 200 - total flux cleaned = -0.00105188 Jy ! Total flux subtracted in 200 components = -0.00105188 Jy ! Clean residual min=-0.003933 max=0.003286 Jy/beam ! Clean residual mean=0.000004 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.839022 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 149 components and 0.839022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082902Jy sigma=0.925651 ! Fit after self-cal, rms=0.082712Jy sigma=0.920961 wmodel J1824+5651_X_b_map.mod ! Writing 149 model components to file: J1824+5651_X_b_map.mod wobs J1824+5651_X_b_uvs.fits ! Writing UV FITS file: J1824+5651_X_b_uvs.fits wwins J1824+5651_X_b_map.win ! wwins: Wrote 12 windows to J1824+5651_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165148 Jy ! Component: 100 - total flux cleaned = -0.000112405 Jy ! Component: 150 - total flux cleaned = -0.000165059 Jy ! Component: 200 - total flux cleaned = -0.000214416 Jy ! Component: 250 - total flux cleaned = -0.000410262 Jy ! Component: 300 - total flux cleaned = -0.000505503 Jy ! Component: 350 - total flux cleaned = -0.000552605 Jy ! Component: 400 - total flux cleaned = -0.00069171 Jy ! Component: 450 - total flux cleaned = -0.000783256 Jy ! Component: 500 - total flux cleaned = -0.00096474 Jy ! Component: 550 - total flux cleaned = -0.00114342 Jy ! Component: 600 - total flux cleaned = -0.00131939 Jy ! Component: 650 - total flux cleaned = -0.00149314 Jy ! Component: 700 - total flux cleaned = -0.00166483 Jy ! Component: 750 - total flux cleaned = -0.00183399 Jy ! Component: 800 - total flux cleaned = -0.00195937 Jy ! Component: 850 - total flux cleaned = -0.00212513 Jy ! Component: 900 - total flux cleaned = -0.00216634 Jy ! Component: 950 - total flux cleaned = -0.00240992 Jy ! Component: 1000 - total flux cleaned = -0.00253083 Jy ! Component: 1050 - total flux cleaned = -0.00272996 Jy ! Component: 1100 - total flux cleaned = -0.00288785 Jy ! Component: 1150 - total flux cleaned = -0.00308396 Jy ! Component: 1200 - total flux cleaned = -0.00327788 Jy ! Component: 1250 - total flux cleaned = -0.00343147 Jy ! Component: 1300 - total flux cleaned = -0.0034318 Jy ! Component: 1350 - total flux cleaned = -0.00358314 Jy ! Component: 1400 - total flux cleaned = -0.00384531 Jy ! Component: 1450 - total flux cleaned = -0.00384473 Jy ! Component: 1500 - total flux cleaned = -0.00391817 Jy ! Component: 1550 - total flux cleaned = -0.00399143 Jy ! Component: 1600 - total flux cleaned = -0.00395484 Jy ! Component: 1650 - total flux cleaned = -0.00406305 Jy ! Component: 1700 - total flux cleaned = -0.00424227 Jy ! Component: 1750 - total flux cleaned = -0.00452518 Jy ! Component: 1800 - total flux cleaned = -0.00449009 Jy ! Component: 1850 - total flux cleaned = -0.00459514 Jy ! Component: 1900 - total flux cleaned = -0.00476856 Jy ! Component: 1950 - total flux cleaned = -0.00480277 Jy ! Component: 2000 - total flux cleaned = -0.0048031 Jy ! Component: 2050 - total flux cleaned = -0.00514245 Jy ! Component: 2100 - total flux cleaned = -0.00500789 Jy ! Component: 2150 - total flux cleaned = -0.00514195 Jy ! Component: 2200 - total flux cleaned = -0.00527507 Jy ! Component: 2250 - total flux cleaned = -0.00534141 Jy ! Component: 2300 - total flux cleaned = -0.00550525 Jy ! Component: 2350 - total flux cleaned = -0.00544017 Jy ! Component: 2400 - total flux cleaned = -0.00569923 Jy ! Component: 2450 - total flux cleaned = -0.00569936 Jy ! Component: 2500 - total flux cleaned = -0.00585946 Jy ! Component: 2550 - total flux cleaned = -0.00582784 Jy ! Component: 2600 - total flux cleaned = -0.00611225 Jy ! Component: 2650 - total flux cleaned = -0.00623782 Jy ! Component: 2700 - total flux cleaned = -0.0063624 Jy ! Component: 2750 - total flux cleaned = -0.0064552 Jy ! Component: 2800 - total flux cleaned = -0.00639357 Jy ! Component: 2850 - total flux cleaned = -0.00648547 Jy ! Component: 2900 - total flux cleaned = -0.00663781 Jy ! Component: 2950 - total flux cleaned = -0.00669869 Jy ! Component: 3000 - total flux cleaned = -0.00669874 Jy ! Component: 3050 - total flux cleaned = -0.00678882 Jy ! Component: 3100 - total flux cleaned = -0.00699782 Jy ! Component: 3150 - total flux cleaned = -0.00696798 Jy ! Component: 3200 - total flux cleaned = -0.00720411 Jy ! Component: 3250 - total flux cleaned = -0.00717482 Jy ! Component: 3300 - total flux cleaned = -0.00732072 Jy ! Component: 3350 - total flux cleaned = -0.0072336 Jy ! Component: 3400 - total flux cleaned = -0.00731984 Jy ! Component: 3450 - total flux cleaned = -0.00737726 Jy ! Component: 3500 - total flux cleaned = -0.00737739 Jy ! Component: 3550 - total flux cleaned = -0.00760511 Jy ! Component: 3600 - total flux cleaned = -0.00754845 Jy ! Component: 3650 - total flux cleaned = -0.0077736 Jy ! Component: 3700 - total flux cleaned = -0.00780148 Jy ! Component: 3750 - total flux cleaned = -0.00788501 Jy ! Component: 3800 - total flux cleaned = -0.007885 Jy ! Component: 3850 - total flux cleaned = -0.0078297 Jy ! Component: 3900 - total flux cleaned = -0.00799439 Jy ! Component: 3950 - total flux cleaned = -0.00802175 Jy ! Component: 4000 - total flux cleaned = -0.00802184 Jy ! Component: 4050 - total flux cleaned = -0.00804874 Jy ! Total flux subtracted in 4096 components = -0.00818353 Jy ! Clean residual min=-0.001485 max=0.001609 Jy/beam ! Clean residual mean=0.000002 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.830839 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 478 components and 0.830839 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1824+5651_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.867 x 1.376 at -18.43 degrees (North through East) ! Clean map min=-0.0040706 max=0.6476 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1824+5651_X_b_map.fits wmodel /vlbi/uf001/uvm//J1824+5651_X_b_map.mod ! Writing 478 model components to file: /vlbi/uf001/uvm//J1824+5651_X_b_map.mod wobs /vlbi/uf001/uvm//J1824+5651_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1824+5651_X_b_uvs.fits wwins /vlbi/uf001/uvm//J1824+5651_X_b_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uvm//J1824+5651_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.647595 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000448946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.207975 0.207975 0.415951 0.831902 1.6638 3.32761 6.65521 13.3104 26.6209 53.2417 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.647 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1442.48 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1824+5651_X_b_dfm.log closed on Sun Jan 13 22:14:47 2019