! Started logfile: /vlbi/uf001/uvm//J1819-2036_S_a_dfm.log on Sun Jan 13 22:13:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1819-2036_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1819-2036_S_a_uvm.fits
! AN table 1: 221 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.999397 visibilities/baseline/integration-bin.
! Found source: J1819-2036
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9939 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1819-2036_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012550Jy  sigma=17.060909
! Fit after  self-cal, rms=0.929478Jy  sigma=15.583807
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.75 mas, bmaj=28.71 mas, bpa=28.42 degrees
! Estimated noise=0.970918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.053742 Jy
! Component: 100  -  total flux cleaned = 0.07987 Jy
! Total flux subtracted in 100 components = 0.07987 Jy
! Clean residual min=-0.009598 max=0.014280 Jy/beam
! Clean residual mean=-0.000259 rms=0.005543 Jy/beam
! Combined flux in latest and established models = 0.07987 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.07987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091373Jy  sigma=1.461535
! Fit after  self-cal, rms=0.090186Jy  sigma=1.442823
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.29 mas, bmaj=31.15 mas, bpa=24.82 degrees
! Estimated noise=0.436228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266603 Jy
! Component: 100  -  total flux cleaned = 0.0446341 Jy
! Component: 150  -  total flux cleaned = 0.0585387 Jy
! Component: 200  -  total flux cleaned = 0.0700322 Jy
! Total flux subtracted in 200 components = 0.0700322 Jy
! Clean residual min=-0.006980 max=0.007011 Jy/beam
! Clean residual mean=-0.000206 rms=0.003956 Jy/beam
! Combined flux in latest and established models = 0.149902 Jy
! Performing phase self-cal
! Adding 164 model components to the UV plane model.
! The established model now contains 207 components and 0.149902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080487Jy  sigma=1.238367
! Fit after  self-cal, rms=0.079845Jy  sigma=1.230124
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.29 x 31.15 at 24.82 degrees (North through East)
! Clean map  min=-0.0072395  max=0.078197 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.26     FD        1.11     KP        1.20     LA        0.82     
!   OV        1.19     PT        0.77     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.07     KP        1.13     LA        0.83     
!   OV        0.99     PT        0.81     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     KP        1.09     LA        0.80     
!   OV        1.06     PT        0.82     
! 
! 
! Fit before self-cal, rms=0.079845Jy  sigma=1.230124
! Fit after  self-cal, rms=0.080528Jy  sigma=1.165088
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.74 mas, bmaj=32.28 mas, bpa=23.63 degrees
! Estimated noise=0.421242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261989 Jy
! Component: 100  -  total flux cleaned = 0.00153403 Jy
! Component: 150  -  total flux cleaned = 0.000354935 Jy
! Component: 200  -  total flux cleaned = -0.000210011 Jy
! Total flux subtracted in 200 components = -0.000210011 Jy
! Clean residual min=-0.001753 max=0.001764 Jy/beam
! Clean residual mean=-0.000015 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.149692 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 306 components and 0.149692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079995Jy  sigma=1.155166
! Fit after  self-cal, rms=0.080209Jy  sigma=1.152362
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080209Jy  sigma=1.152362
! Fit after  self-cal, rms=0.078999Jy  sigma=1.147178
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.7 mas, bmaj=32.24 mas, bpa=23.28 degrees
! Estimated noise=0.416173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123745 Jy
! Component: 100  -  total flux cleaned = 0.00228268 Jy
! Component: 150  -  total flux cleaned = 0.00243772 Jy
! Component: 200  -  total flux cleaned = 0.00257938 Jy
! Total flux subtracted in 200 components = 0.00257938 Jy
! Clean residual min=-0.001070 max=0.001070 Jy/beam
! Clean residual mean=-0.000005 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.152272 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 365 components and 0.152272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078796Jy  sigma=1.143578
! Fit after  self-cal, rms=0.078766Jy  sigma=1.142535
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201227 Jy
! Component: 100  -  total flux cleaned = 0.000681954 Jy
! Component: 150  -  total flux cleaned = 0.000974695 Jy
! Component: 200  -  total flux cleaned = 0.00101873 Jy
! Total flux subtracted in 200 components = 0.00101873 Jy
! Clean residual min=-0.000839 max=0.000835 Jy/beam
! Clean residual mean=-0.000002 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.15329 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 427 components and 0.15329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078647Jy  sigma=1.140843
! Fit after  self-cal, rms=0.078600Jy  sigma=1.140561
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078600Jy  sigma=1.140561
! Fit after  self-cal, rms=0.077228Jy  sigma=1.138133
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.66 mas, bmaj=32.19 mas, bpa=23.07 degrees
! Estimated noise=0.41314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.80518e-05 Jy
! Component: 100  -  total flux cleaned = 7.38009e-05 Jy
! Component: 150  -  total flux cleaned = 0.000409194 Jy
! Component: 200  -  total flux cleaned = 0.000788211 Jy
! Total flux subtracted in 200 components = 0.000788211 Jy
! Clean residual min=-0.000659 max=0.000660 Jy/beam
! Clean residual mean=0.000002 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.154078 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 485 components and 0.154078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077150Jy  sigma=1.136921
! Fit after  self-cal, rms=0.077107Jy  sigma=1.136386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033331 Jy
! Component: 100  -  total flux cleaned = 0.000526033 Jy
! Component: 150  -  total flux cleaned = 0.000853556 Jy
! Component: 200  -  total flux cleaned = 0.00111321 Jy
! Total flux subtracted in 200 components = 0.00111321 Jy
! Clean residual min=-0.000584 max=0.000588 Jy/beam
! Clean residual mean=0.000002 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.155192 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 538 components and 0.155192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077047Jy  sigma=1.135615
! Fit after  self-cal, rms=0.077022Jy  sigma=1.135495
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077022Jy  sigma=1.135495
! Fit after  self-cal, rms=0.076684Jy  sigma=1.135235
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.39 mas, bmaj=32.3 mas, bpa=22.25 degrees
! Estimated noise=0.409242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000671043 Jy
! Component: 100  -  total flux cleaned = 0.00121313 Jy
! Component: 150  -  total flux cleaned = 0.00134361 Jy
! Component: 200  -  total flux cleaned = 0.00140165 Jy
! Total flux subtracted in 200 components = 0.00140165 Jy
! Clean residual min=-0.000472 max=0.000475 Jy/beam
! Clean residual mean=0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.156593 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 593 components and 0.156593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076639Jy  sigma=1.134627
! Fit after  self-cal, rms=0.076622Jy  sigma=1.134512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324374 Jy
! Component: 100  -  total flux cleaned = 0.000505459 Jy
! Component: 150  -  total flux cleaned = 0.00078728 Jy
! Component: 200  -  total flux cleaned = 0.00110044 Jy
! Total flux subtracted in 200 components = 0.00110044 Jy
! Clean residual min=-0.000417 max=0.000419 Jy/beam
! Clean residual mean=0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.157694 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 635 components and 0.157694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076590Jy  sigma=1.134116
! Fit after  self-cal, rms=0.076575Jy  sigma=1.134028
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.64 mas, bmaj=32.09 mas, bpa=23.05 degrees
! Estimated noise=0.411788 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.64 x 32.09 at 23.05 degrees (North through East)
! Clean map  min=-0.0029444  max=0.073956 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.11 mas, bmaj=30.02 mas, bpa=27.01 degrees
! Estimated noise=0.971925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537145 Jy
! Component: 100  -  total flux cleaned = 0.0821012 Jy
! Component: 150  -  total flux cleaned = 0.100494 Jy
! Component: 200  -  total flux cleaned = 0.111295 Jy
! Total flux subtracted in 200 components = 0.111295 Jy
! Clean residual min=-0.007181 max=0.007254 Jy/beam
! Clean residual mean=-0.000112 rms=0.002847 Jy/beam
! Combined flux in latest and established models = 0.111295 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.111295 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.64 mas, bmaj=32.09 mas, bpa=23.05 degrees
! Estimated noise=0.411788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943677 Jy
! Component: 100  -  total flux cleaned = 0.0141917 Jy
! Component: 150  -  total flux cleaned = 0.0163552 Jy
! Component: 200  -  total flux cleaned = 0.0172716 Jy
! Total flux subtracted in 200 components = 0.0172716 Jy
! Clean residual min=-0.003415 max=0.003421 Jy/beam
! Clean residual mean=-0.000054 rms=0.001556 Jy/beam
! Combined flux in latest and established models = 0.128567 Jy
! Adding 129 model components to the UV plane model.
! The established model now contains 188 components and 0.128567 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.39 mas, bmaj=32.3 mas, bpa=22.25 degrees
! Estimated noise=0.409242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202924 Jy
! Component: 100  -  total flux cleaned = 0.00253757 Jy
! Component: 150  -  total flux cleaned = 0.00269323 Jy
! Component: 200  -  total flux cleaned = 0.0034122 Jy
! Total flux subtracted in 200 components = 0.0034122 Jy
! Clean residual min=-0.001798 max=0.001801 Jy/beam
! Clean residual mean=-0.000035 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.131979 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511367 Jy
! Component: 100  -  total flux cleaned = 0.00112557 Jy
! Component: 150  -  total flux cleaned = 0.000980326 Jy
! Component: 200  -  total flux cleaned = 0.00099311 Jy
! Total flux subtracted in 200 components = 0.00099311 Jy
! Clean residual min=-0.001104 max=0.001105 Jy/beam
! Clean residual mean=-0.000026 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.132972 Jy
! Adding 175 model components to the UV plane model.
! The established model now contains 348 components and 0.132972 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.64 mas, bmaj=32.09 mas, bpa=23.05 degrees
! Estimated noise=0.411788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027953 Jy
! Component: 100  -  total flux cleaned = 5.23212e-05 Jy
! Component: 150  -  total flux cleaned = 0.000154381 Jy
! Component: 200  -  total flux cleaned = 0.000333835 Jy
! Total flux subtracted in 200 components = 0.000333835 Jy
! Clean residual min=-0.000727 max=0.000728 Jy/beam
! Clean residual mean=-0.000016 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.133306 Jy
selfcal
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 429 components and 0.133306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076632Jy  sigma=1.135347
! Fit after  self-cal, rms=0.076585Jy  sigma=1.134905
wmodel J1819-2036_S_a_map.mod
! Writing 429 model components to file: J1819-2036_S_a_map.mod
wobs   J1819-2036_S_a_uvs.fits
! Writing UV FITS file: J1819-2036_S_a_uvs.fits
wwins  J1819-2036_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uvm//J1819-2036_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.64 x 32.09 at 23.05 degrees (North through East)
! Clean map  min=-0.003163  max=0.070807 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1819-2036_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1819-2036_S_a_map.mod
! Writing 429 model components to file: /vlbi/uf001/uvm//J1819-2036_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1819-2036_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1819-2036_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1819-2036_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0708071 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000353712 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.49863 1.49863 2.99726 5.99452 11.989 23.9781 47.9562 95.9124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  200.182 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1819-2036_S_a_dfm.log closed on Sun Jan 13 22:13:51 2019