! Started logfile: /vlbi/uf001/uva//J1810+5649_X_dfm.log on Mon Jan 14 04:31:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1810+5649_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1810+5649_X_uva.fits ! AN table 1: 42 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.953704 visibilities/baseline/integration-bin. ! Found source: J1810+5649 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 17304 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1810+5649_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.116518Jy sigma=21.331718 ! Fit after self-cal, rms=0.491723Jy sigma=9.593629 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7658 mas, bmaj=0.9158 mas, bpa=-11.64 degrees ! Estimated noise=0.528635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.381962 Jy ! Component: 100 - total flux cleaned = 0.475456 Jy ! Total flux subtracted in 100 components = 0.475456 Jy ! Clean residual min=-0.021213 max=0.073369 Jy/beam ! Clean residual mean=0.000179 rms=0.005390 Jy/beam ! Combined flux in latest and established models = 0.475456 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.475456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165855Jy sigma=2.977771 ! Fit after self-cal, rms=0.165802Jy sigma=2.976271 ! Inverting map ! Added new window around map position (-1.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655599 Jy ! Component: 100 - total flux cleaned = 0.103755 Jy ! Total flux subtracted in 100 components = 0.103755 Jy ! Clean residual min=-0.015106 max=0.029975 Jy/beam ! Clean residual mean=0.000136 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 0.579211 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.579211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122444Jy sigma=2.209089 ! Fit after self-cal, rms=0.121741Jy sigma=2.194521 ! Inverting map ! Added new window around map position (0.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311675 Jy ! Component: 100 - total flux cleaned = 0.0547078 Jy ! Total flux subtracted in 100 components = 0.0547078 Jy ! Clean residual min=-0.012668 max=0.018661 Jy/beam ! Clean residual mean=0.000113 rms=0.003030 Jy/beam ! Combined flux in latest and established models = 0.633919 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.633919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104333Jy sigma=1.891086 ! Fit after self-cal, rms=0.104160Jy sigma=1.888358 ! Inverting map ! Added new window around map position (3.2, -7.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213334 Jy ! Component: 100 - total flux cleaned = 0.0384955 Jy ! Total flux subtracted in 100 components = 0.0384955 Jy ! Clean residual min=-0.011403 max=0.015517 Jy/beam ! Clean residual mean=0.000095 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 0.672414 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.672414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094948Jy sigma=1.728944 ! Fit after self-cal, rms=0.094837Jy sigma=1.726591 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9586 mas, bmaj=1.147 mas, bpa=-9.159 degrees ! Estimated noise=0.309469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283034 Jy ! Component: 100 - total flux cleaned = 0.0492557 Jy ! Component: 150 - total flux cleaned = 0.0655687 Jy ! Component: 200 - total flux cleaned = 0.0787915 Jy ! Total flux subtracted in 200 components = 0.0787915 Jy ! Clean residual min=-0.012306 max=0.017323 Jy/beam ! Clean residual mean=0.000102 rms=0.003118 Jy/beam ! Combined flux in latest and established models = 0.751206 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 75 components and 0.751206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080854Jy sigma=1.494392 ! Fit after self-cal, rms=0.080553Jy sigma=1.488180 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9586 x 1.147 at -9.159 degrees (North through East) ! Clean map min=-0.011731 max=0.52481 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.95 KP 1.00 LA 0.97 ! MK 1.02 NL 1.10 OV 0.90 PT 0.89 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.96 KP 1.01 LA 0.97 ! MK 1.03 NL 1.09 OV 0.90 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.95 KP 1.00 LA 0.96 ! MK 1.00 NL 1.10 OV 0.91 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.97 KP 1.00 LA 0.97 ! MK 1.01 NL 1.09 OV 0.91 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.96 KP 1.01 LA 0.97 ! MK 1.03 NL 1.11 OV 0.91 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.96 KP 1.03 LA 0.97 ! MK 1.01 NL 1.11 OV 0.91 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.96 KP 1.02 LA 0.98 ! MK 1.03 NL 1.10 OV 0.92 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.97 KP 1.04 LA 0.99 ! MK 1.04 NL 1.10 OV 0.91 PT 0.90 ! SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.96 KP 1.01 LA 0.98 ! MK 1.04 NL 1.11 OV 0.91 PT 0.91 ! SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.98 KP 1.02 LA 0.97 ! MK 1.04 NL 1.12 OV 0.91 PT 0.91 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.95 KP 1.02 LA 1.00 ! MK 1.06 NL 1.10 OV 0.92 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.97 KP 1.03 LA 0.98 ! MK 1.03 NL 1.12 OV 0.91 PT 0.90 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.080553Jy sigma=1.488180 ! Fit after self-cal, rms=0.062012Jy sigma=1.143031 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9691 mas, bmaj=1.159 mas, bpa=-9.274 degrees ! Estimated noise=0.306645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0096291 Jy ! Component: 100 - total flux cleaned = 0.0125438 Jy ! Component: 150 - total flux cleaned = 0.0136513 Jy ! Component: 200 - total flux cleaned = 0.0139791 Jy ! Total flux subtracted in 200 components = 0.0139791 Jy ! Clean residual min=-0.005425 max=0.005694 Jy/beam ! Clean residual mean=0.000033 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.765185 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.765185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060067Jy sigma=1.106146 ! Fit after self-cal, rms=0.060048Jy sigma=1.104985 ! Inverting map ! Added new window around map position (5.2, -10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483552 Jy ! Component: 100 - total flux cleaned = 0.00587698 Jy ! Component: 150 - total flux cleaned = 0.00641349 Jy ! Component: 200 - total flux cleaned = 0.00715538 Jy ! Total flux subtracted in 200 components = 0.00715538 Jy ! Clean residual min=-0.005138 max=0.004743 Jy/beam ! Clean residual mean=0.000025 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.772341 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 112 components and 0.772341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059333Jy sigma=1.091133 ! Fit after self-cal, rms=0.059304Jy sigma=1.090657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059304Jy sigma=1.090657 ! Fit after self-cal, rms=0.057653Jy sigma=1.057033 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9689 mas, bmaj=1.152 mas, bpa=-9.172 degrees ! Estimated noise=0.306639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812774 Jy ! Component: 100 - total flux cleaned = 0.0011491 Jy ! Component: 150 - total flux cleaned = 0.00165772 Jy ! Component: 200 - total flux cleaned = 0.00202169 Jy ! Total flux subtracted in 200 components = 0.00202169 Jy ! Clean residual min=-0.003270 max=0.003556 Jy/beam ! Clean residual mean=0.000015 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.774362 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.774362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057233Jy sigma=1.048781 ! Fit after self-cal, rms=0.057216Jy sigma=1.048374 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288891 Jy ! Component: 100 - total flux cleaned = 0.00314806 Jy ! Component: 150 - total flux cleaned = 0.00354091 Jy ! Component: 200 - total flux cleaned = 0.00410507 Jy ! Total flux subtracted in 200 components = 0.00410507 Jy ! Clean residual min=-0.002890 max=0.002561 Jy/beam ! Clean residual mean=0.000010 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.778467 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.778467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056931Jy sigma=1.043103 ! Fit after self-cal, rms=0.056921Jy sigma=1.042883 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056921Jy sigma=1.042883 ! Fit after self-cal, rms=0.056853Jy sigma=1.041944 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.151 mas, bpa=-9.224 degrees ! Estimated noise=0.306582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278595 Jy ! Component: 100 - total flux cleaned = 0.000497978 Jy ! Component: 150 - total flux cleaned = 0.00088994 Jy ! Component: 200 - total flux cleaned = 0.00118864 Jy ! Total flux subtracted in 200 components = 0.00118864 Jy ! Clean residual min=-0.002537 max=0.002318 Jy/beam ! Clean residual mean=0.000010 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.779656 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 149 components and 0.779656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056693Jy sigma=1.038903 ! Fit after self-cal, rms=0.056688Jy sigma=1.038759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126314 Jy ! Component: 100 - total flux cleaned = 0.000352501 Jy ! Component: 150 - total flux cleaned = 0.000713697 Jy ! Component: 200 - total flux cleaned = 0.000856058 Jy ! Total flux subtracted in 200 components = 0.000856058 Jy ! Clean residual min=-0.002412 max=0.002086 Jy/beam ! Clean residual mean=0.000009 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.780512 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 155 components and 0.780512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056595Jy sigma=1.037085 ! Fit after self-cal, rms=0.056592Jy sigma=1.037021 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056592Jy sigma=1.037021 ! Fit after self-cal, rms=0.056590Jy sigma=1.036616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.173 mas, bmaj=2.256 mas, bpa=66.26 degrees ! Estimated noise=0.416844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109131 Jy ! Component: 100 - total flux cleaned = 0.00193618 Jy ! Component: 150 - total flux cleaned = 0.00262761 Jy ! Component: 200 - total flux cleaned = 0.00300835 Jy ! Total flux subtracted in 200 components = 0.00300835 Jy ! Clean residual min=-0.002245 max=0.002438 Jy/beam ! Clean residual mean=0.000017 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.78352 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 166 components and 0.78352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056548Jy sigma=1.035935 ! Fit after self-cal, rms=0.056544Jy sigma=1.035795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051998 Jy ! Component: 100 - total flux cleaned = 0.000902063 Jy ! Component: 150 - total flux cleaned = 0.00107005 Jy ! Component: 200 - total flux cleaned = 0.00116162 Jy ! Total flux subtracted in 200 components = 0.00116162 Jy ! Clean residual min=-0.002077 max=0.002314 Jy/beam ! Clean residual mean=0.000013 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.784682 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 172 components and 0.784682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056531Jy sigma=1.035631 ! Fit after self-cal, rms=0.056530Jy sigma=1.035587 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9694 mas, bmaj=1.15 mas, bpa=-9.218 degrees ! Estimated noise=0.306706 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9694 x 1.15 at -9.218 degrees (North through East) ! Clean map min=-0.0019689 max=0.51785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056530Jy sigma=1.035587 ! Fit after self-cal, rms=0.052601Jy sigma=0.951154 ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.15 mas, bpa=-9.26 degrees ! Estimated noise=0.306955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164003 Jy ! Component: 100 - total flux cleaned = 5.56263e-05 Jy ! Component: 150 - total flux cleaned = -3.69298e-05 Jy ! Component: 200 - total flux cleaned = -7.74599e-05 Jy ! Total flux subtracted in 200 components = -7.74599e-05 Jy ! Clean residual min=-0.001944 max=0.001921 Jy/beam ! Clean residual mean=0.000009 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.784604 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 184 components and 0.784604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052505Jy sigma=0.949389 ! Fit after self-cal, rms=0.052503Jy sigma=0.949312 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.42106e-05 Jy ! Component: 100 - total flux cleaned = -2.37611e-05 Jy ! Component: 150 - total flux cleaned = -6.18049e-05 Jy ! Component: 200 - total flux cleaned = -6.17013e-05 Jy ! Total flux subtracted in 200 components = -6.17013e-05 Jy ! Clean residual min=-0.001899 max=0.001881 Jy/beam ! Clean residual mean=0.000009 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.784543 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 195 components and 0.784543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052450Jy sigma=0.948421 ! Fit after self-cal, rms=0.052450Jy sigma=0.948397 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052450Jy sigma=0.948397 ! Fit after self-cal, rms=0.052439Jy sigma=0.948133 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.775 mas, bmaj=0.9161 mas, bpa=-11.61 degrees ! Estimated noise=0.52664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.380177 Jy ! Component: 100 - total flux cleaned = 0.480325 Jy ! Component: 150 - total flux cleaned = 0.537991 Jy ! Component: 200 - total flux cleaned = 0.577961 Jy ! Total flux subtracted in 200 components = 0.577961 Jy ! Clean residual min=-0.010653 max=0.022572 Jy/beam ! Clean residual mean=0.000103 rms=0.002722 Jy/beam ! Combined flux in latest and established models = 0.577961 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.577961 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9691 mas, bmaj=1.15 mas, bpa=-9.23 degrees ! Estimated noise=0.306997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045846 Jy ! Component: 100 - total flux cleaned = 0.0762298 Jy ! Component: 150 - total flux cleaned = 0.0983549 Jy ! Component: 200 - total flux cleaned = 0.115273 Jy ! Total flux subtracted in 200 components = 0.115273 Jy ! Clean residual min=-0.004895 max=0.009837 Jy/beam ! Clean residual mean=0.000085 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.693234 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.693234 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130685 Jy ! Component: 100 - total flux cleaned = 0.0232825 Jy ! Component: 150 - total flux cleaned = 0.0314274 Jy ! Component: 200 - total flux cleaned = 0.0381641 Jy ! Total flux subtracted in 200 components = 0.0381641 Jy ! Clean residual min=-0.003245 max=0.004114 Jy/beam ! Clean residual mean=0.000057 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.731398 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 72 components and 0.731398 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575199 Jy ! Component: 100 - total flux cleaned = 0.0107621 Jy ! Component: 150 - total flux cleaned = 0.015184 Jy ! Component: 200 - total flux cleaned = 0.0191223 Jy ! Total flux subtracted in 200 components = 0.0191223 Jy ! Clean residual min=-0.002602 max=0.002903 Jy/beam ! Clean residual mean=0.000040 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.75052 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 99 components and 0.75052 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=2.256 mas, bpa=66.2 degrees ! Estimated noise=0.417517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717757 Jy ! Component: 100 - total flux cleaned = 0.0125412 Jy ! Component: 150 - total flux cleaned = 0.0167968 Jy ! Component: 200 - total flux cleaned = 0.0202338 Jy ! Total flux subtracted in 200 components = 0.0202338 Jy ! Clean residual min=-0.002828 max=0.002607 Jy/beam ! Clean residual mean=0.000059 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.770754 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279673 Jy ! Component: 100 - total flux cleaned = 0.00508585 Jy ! Component: 150 - total flux cleaned = 0.00698249 Jy ! Component: 200 - total flux cleaned = 0.00856809 Jy ! Total flux subtracted in 200 components = 0.00856809 Jy ! Clean residual min=-0.002151 max=0.002034 Jy/beam ! Clean residual mean=0.000036 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.779322 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 190 components and 0.779322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9691 mas, bmaj=1.15 mas, bpa=-9.23 degrees ! Estimated noise=0.306997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131903 Jy ! Component: 100 - total flux cleaned = 0.00194643 Jy ! Component: 150 - total flux cleaned = 0.00250369 Jy ! Component: 200 - total flux cleaned = 0.00284325 Jy ! Total flux subtracted in 200 components = 0.00284325 Jy ! Clean residual min=-0.001742 max=0.001958 Jy/beam ! Clean residual mean=0.000011 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.782165 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 210 components and 0.782165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052406Jy sigma=0.948043 ! Fit after self-cal, rms=0.052372Jy sigma=0.947347 wmodel J1810+5649_X_map.mod ! Writing 210 model components to file: J1810+5649_X_map.mod wobs J1810+5649_X_uvs.fits ! Writing UV FITS file: J1810+5649_X_uvs.fits wwins J1810+5649_X_map.win ! wwins: Wrote 8 windows to J1810+5649_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122303 Jy ! Component: 100 - total flux cleaned = 0.000366146 Jy ! Component: 150 - total flux cleaned = 0.000510752 Jy ! Component: 200 - total flux cleaned = 0.000707858 Jy ! Component: 250 - total flux cleaned = 0.00084385 Jy ! Component: 300 - total flux cleaned = 0.0009238 Jy ! Component: 350 - total flux cleaned = 0.00100171 Jy ! Component: 400 - total flux cleaned = 0.000951727 Jy ! Component: 450 - total flux cleaned = 0.000977018 Jy ! Component: 500 - total flux cleaned = 0.000977436 Jy ! Component: 550 - total flux cleaned = 0.00104918 Jy ! Component: 600 - total flux cleaned = 0.00104909 Jy ! Component: 650 - total flux cleaned = 0.00114115 Jy ! Component: 700 - total flux cleaned = 0.00120907 Jy ! Component: 750 - total flux cleaned = 0.00120937 Jy ! Component: 800 - total flux cleaned = 0.00134121 Jy ! Component: 850 - total flux cleaned = 0.00138438 Jy ! Component: 900 - total flux cleaned = 0.00142692 Jy ! Component: 950 - total flux cleaned = 0.0015113 Jy ! Component: 1000 - total flux cleaned = 0.00157412 Jy ! Component: 1050 - total flux cleaned = 0.00165603 Jy ! Component: 1100 - total flux cleaned = 0.00171691 Jy ! Component: 1150 - total flux cleaned = 0.00177712 Jy ! Component: 1200 - total flux cleaned = 0.00187624 Jy ! Component: 1250 - total flux cleaned = 0.00191536 Jy ! Component: 1300 - total flux cleaned = 0.00197314 Jy ! Component: 1350 - total flux cleaned = 0.00206845 Jy ! Component: 1400 - total flux cleaned = 0.00212519 Jy ! Component: 1450 - total flux cleaned = 0.00219996 Jy ! Component: 1500 - total flux cleaned = 0.00232954 Jy ! Component: 1550 - total flux cleaned = 0.00240261 Jy ! Component: 1600 - total flux cleaned = 0.00240268 Jy ! Component: 1650 - total flux cleaned = 0.00258162 Jy ! Component: 1700 - total flux cleaned = 0.00263456 Jy ! Component: 1750 - total flux cleaned = 0.0026697 Jy ! Component: 1800 - total flux cleaned = 0.00273906 Jy ! Component: 1850 - total flux cleaned = 0.00282497 Jy ! Component: 1900 - total flux cleaned = 0.00285903 Jy ! Component: 1950 - total flux cleaned = 0.00290961 Jy ! Component: 2000 - total flux cleaned = 0.00297645 Jy ! Component: 2050 - total flux cleaned = 0.00302614 Jy ! Component: 2100 - total flux cleaned = 0.00309176 Jy ! Component: 2150 - total flux cleaned = 0.00317314 Jy ! Component: 2200 - total flux cleaned = 0.0032376 Jy ! Component: 2250 - total flux cleaned = 0.00333358 Jy ! Component: 2300 - total flux cleaned = 0.00334939 Jy ! Component: 2350 - total flux cleaned = 0.00339685 Jy ! Component: 2400 - total flux cleaned = 0.00344402 Jy ! Component: 2450 - total flux cleaned = 0.00352123 Jy ! Component: 2500 - total flux cleaned = 0.00355189 Jy ! Component: 2550 - total flux cleaned = 0.00364315 Jy ! Component: 2600 - total flux cleaned = 0.00362785 Jy ! Component: 2650 - total flux cleaned = 0.00373275 Jy ! Component: 2700 - total flux cleaned = 0.00377717 Jy ! Component: 2750 - total flux cleaned = 0.00388037 Jy ! Component: 2800 - total flux cleaned = 0.00392395 Jy ! Component: 2850 - total flux cleaned = 0.00390955 Jy ! Component: 2900 - total flux cleaned = 0.00395272 Jy ! Component: 2950 - total flux cleaned = 0.00400984 Jy ! Component: 3000 - total flux cleaned = 0.0040098 Jy ! Component: 3050 - total flux cleaned = 0.00408019 Jy ! Component: 3100 - total flux cleaned = 0.00405219 Jy ! Component: 3150 - total flux cleaned = 0.00409384 Jy ! Component: 3200 - total flux cleaned = 0.00412128 Jy ! Component: 3250 - total flux cleaned = 0.00416226 Jy ! Component: 3300 - total flux cleaned = 0.00414869 Jy ! Component: 3350 - total flux cleaned = 0.00417561 Jy ! Component: 3400 - total flux cleaned = 0.00428255 Jy ! Component: 3450 - total flux cleaned = 0.00430919 Jy ! Component: 3500 - total flux cleaned = 0.004296 Jy ! Component: 3550 - total flux cleaned = 0.00430902 Jy ! Component: 3600 - total flux cleaned = 0.00433495 Jy ! Component: 3650 - total flux cleaned = 0.00436078 Jy ! Component: 3700 - total flux cleaned = 0.00437371 Jy ! Component: 3750 - total flux cleaned = 0.00442472 Jy ! Component: 3800 - total flux cleaned = 0.00446266 Jy ! Component: 3850 - total flux cleaned = 0.0044375 Jy ! Component: 3900 - total flux cleaned = 0.00450004 Jy ! Component: 3950 - total flux cleaned = 0.00456209 Jy ! Component: 4000 - total flux cleaned = 0.00453749 Jy ! Component: 4050 - total flux cleaned = 0.00462334 Jy ! Total flux subtracted in 4096 components = 0.00464757 Jy ! Clean residual min=-0.000758 max=0.000710 Jy/beam ! Clean residual mean=0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.786813 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 527 components and 0.786813 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1810+5649_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9691 x 1.15 at -9.23 degrees (North through East) ! Clean map min=-0.0013315 max=0.51978 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1810+5649_X_map.fits wmodel /vlbi/uf001/uva//J1810+5649_X_map.mod ! Writing 527 model components to file: /vlbi/uf001/uva//J1810+5649_X_map.mod wobs /vlbi/uf001/uva//J1810+5649_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1810+5649_X_uvs.fits wwins /vlbi/uf001/uva//J1810+5649_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J1810+5649_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.519782 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020149 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.116293 0.116293 0.232585 0.465171 0.930342 1.86068 3.72137 7.44274 14.8855 29.7709 59.5419 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.519 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2579.7 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1810+5649_X_dfm.log closed on Mon Jan 14 04:31:50 2019