! Started logfile: /vlbi/uf001/uvm//J1807+0528_S_a_dfm.log on Sun Jan 13 22:12:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1807+0528_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1807+0528_S_a_uvm.fits
! AN table 1: 24 integrations on 1 of 1 possible baselines.
! AN table 2: 72 integrations on 10 of 10 possible baselines.
! AN table 3: 74 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.832898 visibilities/baseline/integration-bin.
! Found source: J1807+0528
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5742 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1807+0528_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 168 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 168 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 168 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.003523Jy  sigma=23.364176
! Fit after  self-cal, rms=0.967231Jy  sigma=22.539253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.913 mas, bmaj=18.04 mas, bpa=-19.83 degrees
! Estimated noise=0.714781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0253663 Jy
! Component: 100  -  total flux cleaned = 0.0296306 Jy
! Total flux subtracted in 100 components = 0.0296306 Jy
! Clean residual min=-0.002944 max=0.003173 Jy/beam
! Clean residual mean=0.000003 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0296306 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0296306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053586Jy  sigma=1.187555
! Fit after  self-cal, rms=0.051948Jy  sigma=1.149539
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511191 Jy
! Component: 100  -  total flux cleaned = 0.00621316 Jy
! Total flux subtracted in 100 components = 0.00621316 Jy
! Clean residual min=-0.002498 max=0.002518 Jy/beam
! Clean residual mean=0.000000 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.0358437 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.0358437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051370Jy  sigma=1.137192
! Fit after  self-cal, rms=0.051311Jy  sigma=1.136469
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=18.45 mas, bpa=-19.21 degrees
! Estimated noise=0.415841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023223 Jy
! Component: 100  -  total flux cleaned = 0.00275515 Jy
! Component: 150  -  total flux cleaned = 0.0028554 Jy
! Component: 200  -  total flux cleaned = 0.0029933 Jy
! Total flux subtracted in 200 components = 0.0029933 Jy
! Clean residual min=-0.001913 max=0.001623 Jy/beam
! Clean residual mean=-0.000001 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.038837 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 41 components and 0.038837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051187Jy  sigma=1.134142
! Fit after  self-cal, rms=0.051100Jy  sigma=1.133338
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.436 x 18.45 at -19.21 degrees (North through East)
! Clean map  min=-0.0027557  max=0.03648 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    HN        0.00*    
! 
!  A total of 72 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     LA        0.92     NL        1.15     OV        0.89     
!   PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     HN        0.95     KP        0.93     LA        0.92     
!   MK        1.07     NL        1.14     OV        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    HN        0.00*    
! 
!  A total of 72 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     LA        0.95     NL        1.03     OV        0.86     
!   PT        1.11     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.96     HN        1.00     KP        1.05     LA        1.01     
!   MK        0.99     NL        0.97     OV        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    HN        0.00*    
! 
!  A total of 72 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     LA        0.99     NL        0.96     OV        0.89     
!   PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.08     HN        1.02     KP        1.09     LA        0.98     
!   MK        0.97     NL        0.92     OV        1.04     
! 
! 
! Fit before self-cal, rms=0.051100Jy  sigma=1.133338
! Fit after  self-cal, rms=0.051246Jy  sigma=1.138334
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.388 mas, bmaj=18.27 mas, bpa=-19.2 degrees
! Estimated noise=0.422129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.32871e-05 Jy
! Component: 100  -  total flux cleaned = 8.19559e-05 Jy
! Component: 150  -  total flux cleaned = 0.000105061 Jy
! Component: 200  -  total flux cleaned = 0.000125419 Jy
! Total flux subtracted in 200 components = 0.000125419 Jy
! Clean residual min=-0.001657 max=0.001566 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0389625 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 61 components and 0.0389625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051221Jy  sigma=1.137702
! Fit after  self-cal, rms=0.051302Jy  sigma=1.136527
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051302Jy  sigma=1.136527
! Fit after  self-cal, rms=0.052115Jy  sigma=1.134993
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.386 mas, bmaj=18.3 mas, bpa=-19.18 degrees
! Estimated noise=0.424894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115647 Jy
! Component: 100  -  total flux cleaned = 6.75466e-05 Jy
! Component: 150  -  total flux cleaned = 4.69961e-05 Jy
! Component: 200  -  total flux cleaned = 2.94133e-05 Jy
! Total flux subtracted in 200 components = 2.94133e-05 Jy
! Clean residual min=-0.001493 max=0.001400 Jy/beam
! Clean residual mean=-0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.0389919 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 66 components and 0.0389919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052097Jy  sigma=1.134530
! Fit after  self-cal, rms=0.052153Jy  sigma=1.133298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07953e-05 Jy
! Component: 100  -  total flux cleaned = 5.21871e-06 Jy
! Component: 150  -  total flux cleaned = 3.78792e-06 Jy
! Component: 200  -  total flux cleaned = 2.07378e-05 Jy
! Total flux subtracted in 200 components = 2.07378e-05 Jy
! Clean residual min=-0.001414 max=0.001363 Jy/beam
! Clean residual mean=-0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0390126 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.0390126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052133Jy  sigma=1.132853
! Fit after  self-cal, rms=0.052137Jy  sigma=1.132750
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052137Jy  sigma=1.132750
! Fit after  self-cal, rms=0.052805Jy  sigma=1.132592
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=18.32 mas, bpa=-19.16 degrees
! Estimated noise=0.426851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302891 Jy
! Component: 100  -  total flux cleaned = 0.000260902 Jy
! Component: 150  -  total flux cleaned = 0.000242072 Jy
! Component: 200  -  total flux cleaned = 0.000224948 Jy
! Total flux subtracted in 200 components = 0.000224948 Jy
! Clean residual min=-0.001497 max=0.001370 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.0392376 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.0392376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052790Jy  sigma=1.132227
! Fit after  self-cal, rms=0.052834Jy  sigma=1.132101
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.07059e-05 Jy
! Component: 100  -  total flux cleaned = -8.1751e-05 Jy
! Component: 150  -  total flux cleaned = -9.79774e-05 Jy
! Component: 200  -  total flux cleaned = -0.000113427 Jy
! Total flux subtracted in 200 components = -0.000113427 Jy
! Clean residual min=-0.001489 max=0.001409 Jy/beam
! Clean residual mean=-0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0391241 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.0391242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052823Jy  sigma=1.131846
! Fit after  self-cal, rms=0.052823Jy  sigma=1.131789
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052823Jy  sigma=1.131789
! Fit after  self-cal, rms=0.053227Jy  sigma=1.131745
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.55 mas, bmaj=17.36 mas, bpa=-18.23 degrees
! Estimated noise=0.529726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.24062e-05 Jy
! Component: 100  -  total flux cleaned = -5.24128e-05 Jy
! Component: 150  -  total flux cleaned = -2.7209e-05 Jy
! Component: 200  -  total flux cleaned = 1.16958e-05 Jy
! Total flux subtracted in 200 components = 1.16958e-05 Jy
! Clean residual min=-0.001800 max=0.001565 Jy/beam
! Clean residual mean=-0.000002 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0391359 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 95 components and 0.0391359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053221Jy  sigma=1.131641
! Fit after  self-cal, rms=0.053241Jy  sigma=1.131581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110223 Jy
! Component: 100  -  total flux cleaned = -0.000150282 Jy
! Component: 150  -  total flux cleaned = -0.000151707 Jy
! Component: 200  -  total flux cleaned = -0.000129633 Jy
! Total flux subtracted in 200 components = -0.000129633 Jy
! Clean residual min=-0.001785 max=0.001558 Jy/beam
! Clean residual mean=-0.000002 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0390062 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 0.0390062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053237Jy  sigma=1.131511
! Fit after  self-cal, rms=0.053240Jy  sigma=1.131477
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=18.33 mas, bpa=-19.17 degrees
! Estimated noise=0.428452 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.368 x 18.33 at -19.17 degrees (North through East)
! Clean map  min=-0.0035184  max=0.035841 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.881 mas, bmaj=18.05 mas, bpa=-19.71 degrees
! Estimated noise=0.739243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275138 Jy
! Component: 100  -  total flux cleaned = 0.0336151 Jy
! Component: 150  -  total flux cleaned = 0.0350927 Jy
! Component: 200  -  total flux cleaned = 0.0364744 Jy
! Total flux subtracted in 200 components = 0.0364744 Jy
! Clean residual min=-0.002999 max=0.002779 Jy/beam
! Clean residual mean=-0.000000 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.0364744 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0364744 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=18.33 mas, bpa=-19.17 degrees
! Estimated noise=0.428452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190033 Jy
! Component: 100  -  total flux cleaned = 0.00214178 Jy
! Component: 150  -  total flux cleaned = 0.00201794 Jy
! Component: 200  -  total flux cleaned = 0.00196446 Jy
! Total flux subtracted in 200 components = 0.00196446 Jy
! Clean residual min=-0.001578 max=0.001629 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0384389 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.0384389 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.55 mas, bmaj=17.36 mas, bpa=-18.23 degrees
! Estimated noise=0.529726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421881 Jy
! Component: 100  -  total flux cleaned = 0.000327984 Jy
! Component: 150  -  total flux cleaned = 0.000293181 Jy
! Component: 200  -  total flux cleaned = 0.0002783 Jy
! Total flux subtracted in 200 components = 0.0002783 Jy
! Clean residual min=-0.001843 max=0.001534 Jy/beam
! Clean residual mean=-0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0387172 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.30298e-05 Jy
! Component: 100  -  total flux cleaned = 3.60746e-05 Jy
! Component: 150  -  total flux cleaned = 4.67726e-05 Jy
! Component: 200  -  total flux cleaned = 7.78842e-05 Jy
! Total flux subtracted in 200 components = 7.78842e-05 Jy
! Clean residual min=-0.001817 max=0.001538 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0387951 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 80 components and 0.0387951 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=18.33 mas, bpa=-19.17 degrees
! Estimated noise=0.428452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326667 Jy
! Component: 100  -  total flux cleaned = 0.000212519 Jy
! Component: 150  -  total flux cleaned = 0.000163698 Jy
! Component: 200  -  total flux cleaned = 9.56517e-05 Jy
! Total flux subtracted in 200 components = 9.56517e-05 Jy
! Clean residual min=-0.001547 max=0.001451 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0388907 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 88 components and 0.0388907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053250Jy  sigma=1.131841
! Fit after  self-cal, rms=0.053247Jy  sigma=1.131722
wmodel J1807+0528_S_a_map.mod
! Writing 88 model components to file: J1807+0528_S_a_map.mod
wobs   J1807+0528_S_a_uvs.fits
! Writing UV FITS file: J1807+0528_S_a_uvs.fits
wwins  J1807+0528_S_a_map.win
! wwins: Wrote 1 windows to J1807+0528_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.03306e-06 Jy
! Component: 100  -  total flux cleaned = -5.11647e-05 Jy
! Component: 150  -  total flux cleaned = -0.000138674 Jy
! Component: 200  -  total flux cleaned = -0.000177851 Jy
! Component: 250  -  total flux cleaned = -0.000177218 Jy
! Component: 300  -  total flux cleaned = -0.000158677 Jy
! Component: 350  -  total flux cleaned = -0.000193921 Jy
! Component: 400  -  total flux cleaned = -0.000210871 Jy
! Component: 450  -  total flux cleaned = -0.000260903 Jy
! Component: 500  -  total flux cleaned = -0.000341821 Jy
! Component: 550  -  total flux cleaned = -0.000436249 Jy
! Component: 600  -  total flux cleaned = -0.000497855 Jy
! Component: 650  -  total flux cleaned = -0.000572589 Jy
! Component: 700  -  total flux cleaned = -0.000616559 Jy
! Component: 750  -  total flux cleaned = -0.000673752 Jy
! Component: 800  -  total flux cleaned = -0.000688079 Jy
! Component: 850  -  total flux cleaned = -0.000729368 Jy
! Component: 900  -  total flux cleaned = -0.000783371 Jy
! Component: 950  -  total flux cleaned = -0.000849159 Jy
! Component: 1000  -  total flux cleaned = -0.000913269 Jy
! Component: 1050  -  total flux cleaned = -0.000951005 Jy
! Component: 1100  -  total flux cleaned = -0.0010005 Jy
! Component: 1150  -  total flux cleaned = -0.00102495 Jy
! Component: 1200  -  total flux cleaned = -0.00109671 Jy
! Component: 1250  -  total flux cleaned = -0.0011552 Jy
! Component: 1300  -  total flux cleaned = -0.00117814 Jy
! Component: 1350  -  total flux cleaned = -0.00117807 Jy
! Component: 1400  -  total flux cleaned = -0.001178 Jy
! Component: 1450  -  total flux cleaned = -0.0011889 Jy
! Component: 1500  -  total flux cleaned = -0.00115622 Jy
! Component: 1550  -  total flux cleaned = -0.00114558 Jy
! Component: 1600  -  total flux cleaned = -0.00112458 Jy
! Component: 1650  -  total flux cleaned = -0.0011245 Jy
! Component: 1700  -  total flux cleaned = -0.00107292 Jy
! Component: 1750  -  total flux cleaned = -0.00106282 Jy
! Component: 1800  -  total flux cleaned = -0.00105287 Jy
! Component: 1850  -  total flux cleaned = -0.00102321 Jy
! Component: 1900  -  total flux cleaned = -0.00101341 Jy
! Component: 1950  -  total flux cleaned = -0.000955287 Jy
! Component: 2000  -  total flux cleaned = -0.000945779 Jy
! Component: 2050  -  total flux cleaned = -0.000879535 Jy
! Component: 2100  -  total flux cleaned = -0.000851406 Jy
! Component: 2150  -  total flux cleaned = -0.000777271 Jy
! Component: 2200  -  total flux cleaned = -0.000768071 Jy
! Component: 2250  -  total flux cleaned = -0.000713553 Jy
! Component: 2300  -  total flux cleaned = -0.000704589 Jy
! Component: 2350  -  total flux cleaned = -0.000686803 Jy
! Component: 2400  -  total flux cleaned = -0.000677969 Jy
! Component: 2450  -  total flux cleaned = -0.000669193 Jy
! Component: 2500  -  total flux cleaned = -0.000643077 Jy
! Component: 2550  -  total flux cleaned = -0.000625787 Jy
! Component: 2600  -  total flux cleaned = -0.000591749 Jy
! Component: 2650  -  total flux cleaned = -0.000583426 Jy
! Component: 2700  -  total flux cleaned = -0.00056674 Jy
! Component: 2750  -  total flux cleaned = -0.000566739 Jy
! Component: 2800  -  total flux cleaned = -0.000542014 Jy
! Component: 2850  -  total flux cleaned = -0.000550131 Jy
! Component: 2900  -  total flux cleaned = -0.000525704 Jy
! Component: 2950  -  total flux cleaned = -0.00050947 Jy
! Component: 3000  -  total flux cleaned = -0.000477476 Jy
! Component: 3050  -  total flux cleaned = -0.000453663 Jy
! Component: 3100  -  total flux cleaned = -0.000461507 Jy
! Component: 3150  -  total flux cleaned = -0.000445801 Jy
! Component: 3200  -  total flux cleaned = -0.000406892 Jy
! Component: 3250  -  total flux cleaned = -0.000406931 Jy
! Component: 3300  -  total flux cleaned = -0.000376216 Jy
! Component: 3350  -  total flux cleaned = -0.000376287 Jy
! Component: 3400  -  total flux cleaned = -0.000345998 Jy
! Component: 3450  -  total flux cleaned = -0.000353519 Jy
! Component: 3500  -  total flux cleaned = -0.000323553 Jy
! Component: 3550  -  total flux cleaned = -0.000323601 Jy
! Component: 3600  -  total flux cleaned = -0.000316233 Jy
! Component: 3650  -  total flux cleaned = -0.000301545 Jy
! Component: 3700  -  total flux cleaned = -0.000294219 Jy
! Component: 3750  -  total flux cleaned = -0.00025786 Jy
! Component: 3800  -  total flux cleaned = -0.000229018 Jy
! Component: 3850  -  total flux cleaned = -0.00022182 Jy
! Component: 3900  -  total flux cleaned = -0.000171756 Jy
! Component: 3950  -  total flux cleaned = -0.000164661 Jy
! Component: 4000  -  total flux cleaned = -0.000136313 Jy
! Component: 4050  -  total flux cleaned = -0.000129289 Jy
! Total flux subtracted in 4096 components = -0.000115258 Jy
! Clean residual min=-0.000508 max=0.000423 Jy/beam
! Clean residual mean=0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0387754 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 340 components and 0.0387754 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1807+0528_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.368 x 18.33 at -19.17 degrees (North through East)
! Clean map  min=-0.0035118  max=0.035653 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1807+0528_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1807+0528_S_a_map.mod
! Writing 340 model components to file: /vlbi/uf001/uvm//J1807+0528_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1807+0528_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1807+0528_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1807+0528_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1807+0528_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0356531 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000127662 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0742 1.0742 2.1484 4.29679 8.59358 17.1872 34.3743 68.7487
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.035 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  279.278 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1807+0528_S_a_dfm.log closed on Sun Jan 13 22:12:33 2019