! Started logfile: /vlbi/uf001/uva//J1755+3350_S_b_dfm.log on Mon Jan 14 04:25:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1755+3350_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1755+3350_S_b_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.633333 visibilities/baseline/integration-bin.
! Found source: J1755+3350
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1653 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1755+3350_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000632Jy  sigma=24.587132
! Fit after  self-cal, rms=0.965380Jy  sigma=23.883012
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.426 mas, bmaj=9.476 mas, bpa=-40.76 degrees
! Estimated noise=1.39438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265011 Jy
! Component: 100  -  total flux cleaned = 0.0329328 Jy
! Total flux subtracted in 100 components = 0.0329328 Jy
! Clean residual min=-0.004196 max=0.004096 Jy/beam
! Clean residual mean=0.000001 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.0329328 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0329328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047699Jy  sigma=1.120821
! Fit after  self-cal, rms=0.046198Jy  sigma=1.085915
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=9.728 mas, bpa=-38.1 degrees
! Estimated noise=0.744465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511313 Jy
! Component: 100  -  total flux cleaned = 0.0076717 Jy
! Component: 150  -  total flux cleaned = 0.00896658 Jy
! Component: 200  -  total flux cleaned = 0.00922993 Jy
! Total flux subtracted in 200 components = 0.00922993 Jy
! Clean residual min=-0.003743 max=0.003011 Jy/beam
! Clean residual mean=-0.000005 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.0421628 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 33 components and 0.0421628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045640Jy  sigma=1.071899
! Fit after  self-cal, rms=0.045487Jy  sigma=1.070314
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.103 x 9.728 at -38.1 degrees (North through East)
! Clean map  min=-0.0037142  max=0.037595 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.80     HN        1.05     KP        1.24     LA        0.86     
!   MK        1.05     OV        1.12     
! 
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     HN        0.99     KP        1.10     LA        0.93     
!   MK        1.05     OV        0.90     
! 
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.90     KP        0.91     LA        1.30     
!   MK        1.08     OV        1.04     
! 
! 
! Fit before self-cal, rms=0.045487Jy  sigma=1.070314
! Fit after  self-cal, rms=0.047546Jy  sigma=1.086261
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=11.18 mas, bpa=-42.19 degrees
! Estimated noise=0.837765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120138 Jy
! Component: 100  -  total flux cleaned = 0.000274904 Jy
! Component: 150  -  total flux cleaned = 0.000398582 Jy
! Component: 200  -  total flux cleaned = 0.000398861 Jy
! Total flux subtracted in 200 components = 0.000398861 Jy
! Clean residual min=-0.003800 max=0.003096 Jy/beam
! Clean residual mean=-0.000005 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.0425616 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 57 components and 0.0425616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047448Jy  sigma=1.083906
! Fit after  self-cal, rms=0.047612Jy  sigma=1.081640
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047612Jy  sigma=1.081640
! Fit after  self-cal, rms=0.048214Jy  sigma=1.081053
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=11.12 mas, bpa=-42.24 degrees
! Estimated noise=0.837913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174776 Jy
! Component: 100  -  total flux cleaned = 3.37808e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103703 Jy
! Component: 200  -  total flux cleaned = 0.000135486 Jy
! Total flux subtracted in 200 components = 0.000135486 Jy
! Clean residual min=-0.003632 max=0.003109 Jy/beam
! Clean residual mean=-0.000004 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0426971 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 65 components and 0.0426971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048145Jy  sigma=1.079657
! Fit after  self-cal, rms=0.048195Jy  sigma=1.079087
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65714e-05 Jy
! Component: 100  -  total flux cleaned = 5.13313e-05 Jy
! Component: 150  -  total flux cleaned = 8.5583e-05 Jy
! Component: 200  -  total flux cleaned = 0.000144733 Jy
! Total flux subtracted in 200 components = 0.000144733 Jy
! Clean residual min=-0.003714 max=0.003241 Jy/beam
! Clean residual mean=-0.000005 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.0428419 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.0428419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048136Jy  sigma=1.078014
! Fit after  self-cal, rms=0.048128Jy  sigma=1.077787
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048128Jy  sigma=1.077787
! Fit after  self-cal, rms=0.048221Jy  sigma=1.077671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=11.08 mas, bpa=-42.28 degrees
! Estimated noise=0.837169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243529 Jy
! Component: 100  -  total flux cleaned = -0.000178004 Jy
! Component: 150  -  total flux cleaned = -0.000118001 Jy
! Component: 200  -  total flux cleaned = -6.62536e-05 Jy
! Total flux subtracted in 200 components = -6.62536e-05 Jy
! Clean residual min=-0.003679 max=0.003184 Jy/beam
! Clean residual mean=-0.000005 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.0427756 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.0427756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048170Jy  sigma=1.076895
! Fit after  self-cal, rms=0.048188Jy  sigma=1.076715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259921 Jy
! Component: 100  -  total flux cleaned = -0.000202937 Jy
! Component: 150  -  total flux cleaned = -0.000178175 Jy
! Component: 200  -  total flux cleaned = -0.000155013 Jy
! Total flux subtracted in 200 components = -0.000155013 Jy
! Clean residual min=-0.003642 max=0.003221 Jy/beam
! Clean residual mean=-0.000005 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.0426206 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.0426206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048145Jy  sigma=1.076166
! Fit after  self-cal, rms=0.048141Jy  sigma=1.076039
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048141Jy  sigma=1.076039
! Fit after  self-cal, rms=0.048039Jy  sigma=1.075997
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.543 mas, bmaj=13.65 mas, bpa=-57.74 degrees
! Estimated noise=1.13306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218339 Jy
! Component: 100  -  total flux cleaned = -0.000222507 Jy
! Component: 150  -  total flux cleaned = -0.00022029 Jy
! Component: 200  -  total flux cleaned = -0.00017934 Jy
! Total flux subtracted in 200 components = -0.00017934 Jy
! Clean residual min=-0.003780 max=0.003720 Jy/beam
! Clean residual mean=-0.000009 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.0424412 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 98 components and 0.0424412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048003Jy  sigma=1.076043
! Fit after  self-cal, rms=0.047993Jy  sigma=1.075667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000292142 Jy
! Component: 100  -  total flux cleaned = -0.000292757 Jy
! Component: 150  -  total flux cleaned = -0.000251132 Jy
! Component: 200  -  total flux cleaned = -0.000179421 Jy
! Total flux subtracted in 200 components = -0.000179421 Jy
! Clean residual min=-0.003906 max=0.003773 Jy/beam
! Clean residual mean=-0.000010 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.0422618 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 112 components and 0.0422618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047971Jy  sigma=1.075817
! Fit after  self-cal, rms=0.047958Jy  sigma=1.075547
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.99 mas, bmaj=11.05 mas, bpa=-42.31 degrees
! Estimated noise=0.836025 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.99 x 11.05 at -42.31 degrees (North through East)
! Clean map  min=-0.0071856  max=0.035997 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.379 mas, bmaj=10.47 mas, bpa=-43.02 degrees
! Estimated noise=1.54508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272933 Jy
! Component: 100  -  total flux cleaned = 0.034276 Jy
! Component: 150  -  total flux cleaned = 0.0375324 Jy
! Component: 200  -  total flux cleaned = 0.0386726 Jy
! Total flux subtracted in 200 components = 0.0386726 Jy
! Clean residual min=-0.004288 max=0.004062 Jy/beam
! Clean residual mean=-0.000000 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.0386727 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0386727 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.99 mas, bmaj=11.05 mas, bpa=-42.31 degrees
! Estimated noise=0.836025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183744 Jy
! Component: 100  -  total flux cleaned = 0.00260992 Jy
! Component: 150  -  total flux cleaned = 0.00293257 Jy
! Component: 200  -  total flux cleaned = 0.00306382 Jy
! Total flux subtracted in 200 components = 0.00306382 Jy
! Clean residual min=-0.003846 max=0.003233 Jy/beam
! Clean residual mean=-0.000004 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.0417365 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 48 components and 0.0417365 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.543 mas, bmaj=13.65 mas, bpa=-57.74 degrees
! Estimated noise=1.13306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000416487 Jy
! Component: 100  -  total flux cleaned = 0.000479349 Jy
! Component: 150  -  total flux cleaned = 0.00052762 Jy
! Component: 200  -  total flux cleaned = 0.000635523 Jy
! Total flux subtracted in 200 components = 0.000635523 Jy
! Clean residual min=-0.003929 max=0.003827 Jy/beam
! Clean residual mean=-0.000009 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 0.042372 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.93619e-05 Jy
! Component: 100  -  total flux cleaned = 0.000141226 Jy
! Component: 150  -  total flux cleaned = 0.000209971 Jy
! Component: 200  -  total flux cleaned = 0.000287711 Jy
! Total flux subtracted in 200 components = 0.000287711 Jy
! Clean residual min=-0.003798 max=0.003806 Jy/beam
! Clean residual mean=-0.000010 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.0426597 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 82 components and 0.0426597 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.99 mas, bmaj=11.05 mas, bpa=-42.31 degrees
! Estimated noise=0.836025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.80924e-05 Jy
! Component: 100  -  total flux cleaned = 5.09283e-05 Jy
! Component: 150  -  total flux cleaned = 8.09712e-05 Jy
! Component: 200  -  total flux cleaned = 8.04162e-05 Jy
! Total flux subtracted in 200 components = 8.04162e-05 Jy
! Clean residual min=-0.003808 max=0.003091 Jy/beam
! Clean residual mean=-0.000005 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.0427401 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 94 components and 0.0427401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047965Jy  sigma=1.075950
! Fit after  self-cal, rms=0.047926Jy  sigma=1.075370
wmodel J1755+3350_S_b_map.mod
! Writing 94 model components to file: J1755+3350_S_b_map.mod
wobs   J1755+3350_S_b_uvs.fits
! Writing UV FITS file: J1755+3350_S_b_uvs.fits
wwins  J1755+3350_S_b_map.win
! wwins: Wrote 1 windows to J1755+3350_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119236 Jy
! Component: 100  -  total flux cleaned = -0.00124658 Jy
! Component: 150  -  total flux cleaned = -0.00107668 Jy
! Component: 200  -  total flux cleaned = -0.000883914 Jy
! Component: 250  -  total flux cleaned = -0.00084971 Jy
! Component: 300  -  total flux cleaned = -0.000654894 Jy
! Component: 350  -  total flux cleaned = -0.00037687 Jy
! Component: 400  -  total flux cleaned = -0.000172572 Jy
! Component: 450  -  total flux cleaned = 2.15954e-05 Jy
! Component: 500  -  total flux cleaned = 0.000154169 Jy
! Component: 550  -  total flux cleaned = 0.000128878 Jy
! Component: 600  -  total flux cleaned = 0.000129054 Jy
! Component: 650  -  total flux cleaned = 0.000129038 Jy
! Component: 700  -  total flux cleaned = 0.000152712 Jy
! Component: 750  -  total flux cleaned = 0.000198519 Jy
! Component: 800  -  total flux cleaned = 0.000243762 Jy
! Component: 850  -  total flux cleaned = 0.00024325 Jy
! Component: 900  -  total flux cleaned = 8.70607e-05 Jy
! Component: 950  -  total flux cleaned = -0.000114225 Jy
! Component: 1000  -  total flux cleaned = -0.000271522 Jy
! Component: 1050  -  total flux cleaned = -0.000429174 Jy
! Component: 1100  -  total flux cleaned = -0.000611003 Jy
! Component: 1150  -  total flux cleaned = -0.00067981 Jy
! Component: 1200  -  total flux cleaned = -0.000726176 Jy
! Component: 1250  -  total flux cleaned = -0.000726377 Jy
! Component: 1300  -  total flux cleaned = -0.000726306 Jy
! Component: 1350  -  total flux cleaned = -0.000726067 Jy
! Component: 1400  -  total flux cleaned = -0.000700401 Jy
! Component: 1450  -  total flux cleaned = -0.000700525 Jy
! Component: 1500  -  total flux cleaned = -0.000672213 Jy
! Component: 1550  -  total flux cleaned = -0.000671328 Jy
! Component: 1600  -  total flux cleaned = -0.000671866 Jy
! Component: 1650  -  total flux cleaned = -0.000640082 Jy
! Component: 1700  -  total flux cleaned = -0.000640019 Jy
! Component: 1750  -  total flux cleaned = -0.000605437 Jy
! Component: 1800  -  total flux cleaned = -0.000605076 Jy
! Component: 1850  -  total flux cleaned = -0.000605581 Jy
! Component: 1900  -  total flux cleaned = -0.000566976 Jy
! Component: 1950  -  total flux cleaned = -0.000567317 Jy
! Component: 2000  -  total flux cleaned = -0.000568229 Jy
! Component: 2050  -  total flux cleaned = -0.000524154 Jy
! Component: 2100  -  total flux cleaned = -0.000477397 Jy
! Component: 2150  -  total flux cleaned = -0.000476803 Jy
! Component: 2200  -  total flux cleaned = -0.000476552 Jy
! Component: 2250  -  total flux cleaned = -0.000423157 Jy
! Component: 2300  -  total flux cleaned = -0.000421963 Jy
! Component: 2350  -  total flux cleaned = -0.000420559 Jy
! Component: 2400  -  total flux cleaned = -0.000421677 Jy
! Component: 2450  -  total flux cleaned = -0.000422393 Jy
! Component: 2500  -  total flux cleaned = -0.000423836 Jy
! Component: 2550  -  total flux cleaned = -0.000424554 Jy
! Component: 2600  -  total flux cleaned = -0.000425566 Jy
! Component: 2650  -  total flux cleaned = -0.000425577 Jy
! Component: 2700  -  total flux cleaned = -0.000423505 Jy
! Component: 2750  -  total flux cleaned = -0.000423426 Jy
! Component: 2800  -  total flux cleaned = -0.000506205 Jy
! Component: 2850  -  total flux cleaned = -0.000506584 Jy
! Component: 2900  -  total flux cleaned = -0.000508612 Jy
! Component: 2950  -  total flux cleaned = -0.000509356 Jy
! Component: 3000  -  total flux cleaned = -0.000507974 Jy
! Component: 3050  -  total flux cleaned = -0.000507254 Jy
! Component: 3100  -  total flux cleaned = -0.000617317 Jy
! Component: 3150  -  total flux cleaned = -0.00061825 Jy
! Component: 3200  -  total flux cleaned = -0.000619893 Jy
! Component: 3250  -  total flux cleaned = -0.000623162 Jy
! Component: 3300  -  total flux cleaned = -0.000621624 Jy
! Component: 3350  -  total flux cleaned = -0.000621531 Jy
! Component: 3400  -  total flux cleaned = -0.000619919 Jy
! Component: 3450  -  total flux cleaned = -0.00076724 Jy
! Component: 3500  -  total flux cleaned = -0.000609659 Jy
! Component: 3550  -  total flux cleaned = -0.000766891 Jy
! Component: 3600  -  total flux cleaned = -0.000768072 Jy
! Component: 3650  -  total flux cleaned = -0.000770498 Jy
! Component: 3700  -  total flux cleaned = -0.000767124 Jy
! Component: 3750  -  total flux cleaned = -0.000765646 Jy
! Component: 3800  -  total flux cleaned = -0.000762886 Jy
! Component: 3850  -  total flux cleaned = -0.000762008 Jy
! Component: 3900  -  total flux cleaned = -0.000761418 Jy
! Component: 3950  -  total flux cleaned = -0.000755939 Jy
! Component: 4000  -  total flux cleaned = -0.000747998 Jy
! Component: 4050  -  total flux cleaned = -0.000992868 Jy
! Total flux subtracted in 4096 components = -0.000999101 Jy
! Clean residual min=-0.013597 max=0.013754 Jy/beam
! Clean residual mean=-0.000038 rms=0.002758 Jy/beam
! Combined flux in latest and established models = 0.041741 Jy
keep
! Adding 123 model components to the UV plane model.
! The established model now contains 217 components and 0.041741 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1755+3350_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.99 x 11.05 at -42.31 degrees (North through East)
! Clean map  min=-0.022643  max=0.030428 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1755+3350_S_b_map.fits
wmodel /vlbi/uf001/uva//J1755+3350_S_b_map.mod
! Writing 217 model components to file: /vlbi/uf001/uva//J1755+3350_S_b_map.mod
wobs   /vlbi/uf001/uva//J1755+3350_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1755+3350_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1755+3350_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1755+3350_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0304276 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00226438 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -22.3256 22.3256 44.6512 89.3024
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0067 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.03 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  13.437 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1755+3350_S_b_dfm.log closed on Mon Jan 14 04:25:31 2019