! Started logfile: /vlbi/uf001/uvm//J1752-3001_S_a_dfm.log on Sun Jan 13 22:10:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1752-3001_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1752-3001_S_a_uvm.fits
! AN table 1: 221 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.999548 visibilities/baseline/integration-bin.
! Found source: J1752-3001
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6627 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1752-3001_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004400Jy  sigma=16.768844
! Fit after  self-cal, rms=0.946356Jy  sigma=15.801522
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.94 mas, bmaj=54.33 mas, bpa=5.061 degrees
! Estimated noise=0.672845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0418466 Jy
! Component: 100  -  total flux cleaned = 0.0535081 Jy
! Total flux subtracted in 100 components = 0.0535081 Jy
! Clean residual min=-0.005124 max=0.005433 Jy/beam
! Clean residual mean=-0.000177 rms=0.001959 Jy/beam
! Combined flux in latest and established models = 0.0535081 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.0535081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070580Jy  sigma=1.134359
! Fit after  self-cal, rms=0.069218Jy  sigma=1.111332
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.8 mas, bmaj=56.38 mas, bpa=2.591 degrees
! Estimated noise=0.533083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0088854 Jy
! Component: 100  -  total flux cleaned = 0.0139398 Jy
! Component: 150  -  total flux cleaned = 0.0176915 Jy
! Component: 200  -  total flux cleaned = 0.0208628 Jy
! Total flux subtracted in 200 components = 0.0208628 Jy
! Clean residual min=-0.004180 max=0.003936 Jy/beam
! Clean residual mean=-0.000111 rms=0.001680 Jy/beam
! Combined flux in latest and established models = 0.0743709 Jy
! Performing phase self-cal
! Adding 151 model components to the UV plane model.
! The established model now contains 181 components and 0.074371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067911Jy  sigma=1.090020
! Fit after  self-cal, rms=0.067698Jy  sigma=1.086555
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.8 x 56.38 at 2.591 degrees (North through East)
! Clean map  min=-0.0044495  max=0.058661 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.05     LA        0.92     OV        1.05     
!   PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        1.02     LA        0.89     OV        0.91     
!   PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.09     LA        0.95     OV        1.01     
!   PT        0.93     
! 
! 
! Fit before self-cal, rms=0.067698Jy  sigma=1.086555
! Fit after  self-cal, rms=0.065513Jy  sigma=1.082926
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.88 mas, bmaj=56.33 mas, bpa=2.293 degrees
! Estimated noise=0.514341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383082 Jy
! Component: 100  -  total flux cleaned = 0.00630056 Jy
! Component: 150  -  total flux cleaned = 0.00821249 Jy
! Component: 200  -  total flux cleaned = 0.00981204 Jy
! Total flux subtracted in 200 components = 0.00981204 Jy
! Clean residual min=-0.002688 max=0.003076 Jy/beam
! Clean residual mean=-0.000035 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.084183 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 243 components and 0.084183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065193Jy  sigma=1.078393
! Fit after  self-cal, rms=0.065275Jy  sigma=1.076680
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065275Jy  sigma=1.076680
! Fit after  self-cal, rms=0.064749Jy  sigma=1.069463
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.01 mas, bmaj=56.1 mas, bpa=1.521 degrees
! Estimated noise=0.516123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276458 Jy
! Component: 100  -  total flux cleaned = 0.00431441 Jy
! Component: 150  -  total flux cleaned = 0.00542307 Jy
! Component: 200  -  total flux cleaned = 0.00626838 Jy
! Total flux subtracted in 200 components = 0.00626838 Jy
! Clean residual min=-0.002030 max=0.002005 Jy/beam
! Clean residual mean=-0.000012 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.0904514 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 287 components and 0.0904513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064601Jy  sigma=1.067455
! Fit after  self-cal, rms=0.064660Jy  sigma=1.065702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013037 Jy
! Component: 100  -  total flux cleaned = 0.00221584 Jy
! Component: 150  -  total flux cleaned = 0.00288279 Jy
! Component: 200  -  total flux cleaned = 0.00341201 Jy
! Total flux subtracted in 200 components = 0.00341201 Jy
! Clean residual min=-0.001948 max=0.001988 Jy/beam
! Clean residual mean=-0.000008 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0938634 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 297 components and 0.0938634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064618Jy  sigma=1.065207
! Fit after  self-cal, rms=0.064611Jy  sigma=1.065019
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064611Jy  sigma=1.065019
! Fit after  self-cal, rms=0.064657Jy  sigma=1.062588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.04 mas, bmaj=56.05 mas, bpa=1.11 degrees
! Estimated noise=0.511197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125436 Jy
! Component: 100  -  total flux cleaned = 0.00185229 Jy
! Component: 150  -  total flux cleaned = 0.00212053 Jy
! Component: 200  -  total flux cleaned = 0.00228138 Jy
! Total flux subtracted in 200 components = 0.00228138 Jy
! Clean residual min=-0.001985 max=0.001871 Jy/beam
! Clean residual mean=-0.000011 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0961447 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 318 components and 0.0961448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064618Jy  sigma=1.062178
! Fit after  self-cal, rms=0.064711Jy  sigma=1.061625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355813 Jy
! Component: 100  -  total flux cleaned = 0.000510174 Jy
! Component: 150  -  total flux cleaned = 0.000603001 Jy
! Component: 200  -  total flux cleaned = 0.000650635 Jy
! Total flux subtracted in 200 components = 0.000650635 Jy
! Clean residual min=-0.001879 max=0.001948 Jy/beam
! Clean residual mean=-0.000010 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.0967954 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 332 components and 0.0967954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064694Jy  sigma=1.061484
! Fit after  self-cal, rms=0.064691Jy  sigma=1.061445
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064691Jy  sigma=1.061445
! Fit after  self-cal, rms=0.064843Jy  sigma=1.061147
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.63 mas, bmaj=55.97 mas, bpa=0.4836 degrees
! Estimated noise=0.510251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527507 Jy
! Component: 100  -  total flux cleaned = 0.000779974 Jy
! Component: 150  -  total flux cleaned = 0.000969009 Jy
! Component: 200  -  total flux cleaned = 0.00111378 Jy
! Total flux subtracted in 200 components = 0.00111378 Jy
! Clean residual min=-0.001886 max=0.001900 Jy/beam
! Clean residual mean=-0.000012 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.0979092 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 337 components and 0.0979092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064826Jy  sigma=1.061007
! Fit after  self-cal, rms=0.064886Jy  sigma=1.060841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.14432e-05 Jy
! Component: 100  -  total flux cleaned = 5.04257e-05 Jy
! Component: 150  -  total flux cleaned = 0.000130313 Jy
! Component: 200  -  total flux cleaned = 0.000189232 Jy
! Total flux subtracted in 200 components = 0.000189232 Jy
! Clean residual min=-0.001854 max=0.001885 Jy/beam
! Clean residual mean=-0.000011 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0980984 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 340 components and 0.0980984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064876Jy  sigma=1.060769
! Fit after  self-cal, rms=0.064871Jy  sigma=1.060715
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.03 mas, bmaj=55.92 mas, bpa=0.9662 degrees
! Estimated noise=0.50876 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.03 x 55.92 at 0.9662 degrees (North through East)
! Clean map  min=-0.0018568  max=0.058886 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.26 mas, bmaj=53.17 mas, bpa=3.445 degrees
! Estimated noise=0.657675 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0405401 Jy
! Component: 100  -  total flux cleaned = 0.0552703 Jy
! Component: 150  -  total flux cleaned = 0.0640001 Jy
! Component: 200  -  total flux cleaned = 0.0696055 Jy
! Total flux subtracted in 200 components = 0.0696055 Jy
! Clean residual min=-0.004890 max=0.004157 Jy/beam
! Clean residual mean=-0.000131 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.0696054 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 87 model components to the UV plane model.
! The established model now contains 87 components and 0.0696054 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.03 mas, bmaj=55.92 mas, bpa=0.9662 degrees
! Estimated noise=0.50876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511534 Jy
! Component: 100  -  total flux cleaned = 0.00902804 Jy
! Component: 150  -  total flux cleaned = 0.0122391 Jy
! Component: 200  -  total flux cleaned = 0.0149101 Jy
! Total flux subtracted in 200 components = 0.0149101 Jy
! Clean residual min=-0.003205 max=0.002641 Jy/beam
! Clean residual mean=-0.000052 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.0845156 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 176 components and 0.0845156 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.63 mas, bmaj=55.97 mas, bpa=0.4836 degrees
! Estimated noise=0.510251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234719 Jy
! Component: 100  -  total flux cleaned = 0.00429667 Jy
! Component: 150  -  total flux cleaned = 0.00592335 Jy
! Component: 200  -  total flux cleaned = 0.00728385 Jy
! Total flux subtracted in 200 components = 0.00728385 Jy
! Clean residual min=-0.002526 max=0.002273 Jy/beam
! Clean residual mean=-0.000032 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.0917994 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113903 Jy
! Component: 100  -  total flux cleaned = 0.00209324 Jy
! Component: 150  -  total flux cleaned = 0.0028933 Jy
! Component: 200  -  total flux cleaned = 0.00353963 Jy
! Total flux subtracted in 200 components = 0.00353963 Jy
! Clean residual min=-0.002172 max=0.002115 Jy/beam
! Clean residual mean=-0.000022 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.0953391 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 237 components and 0.0953391 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.03 mas, bmaj=55.92 mas, bpa=0.9662 degrees
! Estimated noise=0.50876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.77218e-05 Jy
! Component: 100  -  total flux cleaned = 8.68988e-05 Jy
! Component: 150  -  total flux cleaned = 0.000236405 Jy
! Component: 200  -  total flux cleaned = 0.000337184 Jy
! Total flux subtracted in 200 components = 0.000337184 Jy
! Clean residual min=-0.002175 max=0.002122 Jy/beam
! Clean residual mean=-0.000020 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.0956763 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 254 components and 0.0956763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064905Jy  sigma=1.061246
! Fit after  self-cal, rms=0.064889Jy  sigma=1.060937
wmodel J1752-3001_S_a_map.mod
! Writing 254 model components to file: J1752-3001_S_a_map.mod
wobs   J1752-3001_S_a_uvs.fits
! Writing UV FITS file: J1752-3001_S_a_uvs.fits
wwins  J1752-3001_S_a_map.win
! wwins: Wrote 1 windows to J1752-3001_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258001 Jy
! Component: 100  -  total flux cleaned = 0.000230665 Jy
! Component: 150  -  total flux cleaned = 0.000202067 Jy
! Component: 200  -  total flux cleaned = 0.000345732 Jy
! Component: 250  -  total flux cleaned = 0.000412232 Jy
! Component: 300  -  total flux cleaned = 0.000372233 Jy
! Component: 350  -  total flux cleaned = 0.000410514 Jy
! Component: 400  -  total flux cleaned = 0.000482824 Jy
! Component: 450  -  total flux cleaned = 0.00058702 Jy
! Component: 500  -  total flux cleaned = 0.000686903 Jy
! Component: 550  -  total flux cleaned = 0.000766926 Jy
! Component: 600  -  total flux cleaned = 0.000843573 Jy
! Component: 650  -  total flux cleaned = 0.000946611 Jy
! Component: 700  -  total flux cleaned = 0.0011021 Jy
! Component: 750  -  total flux cleaned = 0.00119804 Jy
! Component: 800  -  total flux cleaned = 0.00130429 Jy
! Component: 850  -  total flux cleaned = 0.00136914 Jy
! Component: 900  -  total flux cleaned = 0.00143268 Jy
! Component: 950  -  total flux cleaned = 0.00146991 Jy
! Component: 1000  -  total flux cleaned = 0.00151866 Jy
! Component: 1050  -  total flux cleaned = 0.00157804 Jy
! Component: 1100  -  total flux cleaned = 0.00162454 Jy
! Component: 1150  -  total flux cleaned = 0.00163625 Jy
! Component: 1200  -  total flux cleaned = 0.00170354 Jy
! Component: 1250  -  total flux cleaned = 0.0017253 Jy
! Component: 1300  -  total flux cleaned = 0.00173611 Jy
! Component: 1350  -  total flux cleaned = 0.00175742 Jy
! Component: 1400  -  total flux cleaned = 0.00180954 Jy
! Component: 1450  -  total flux cleaned = 0.00184007 Jy
! Component: 1500  -  total flux cleaned = 0.00187046 Jy
! Component: 1550  -  total flux cleaned = 0.00193007 Jy
! Component: 1600  -  total flux cleaned = 0.00196911 Jy
! Component: 1650  -  total flux cleaned = 0.00201718 Jy
! Component: 1700  -  total flux cleaned = 0.00208324 Jy
! Component: 1750  -  total flux cleaned = 0.00212037 Jy
! Component: 1800  -  total flux cleaned = 0.00214788 Jy
! Component: 1850  -  total flux cleaned = 0.00216589 Jy
! Component: 1900  -  total flux cleaned = 0.00220162 Jy
! Component: 1950  -  total flux cleaned = 0.00223691 Jy
! Component: 2000  -  total flux cleaned = 0.00228059 Jy
! Component: 2050  -  total flux cleaned = 0.00233243 Jy
! Component: 2100  -  total flux cleaned = 0.00235818 Jy
! Component: 2150  -  total flux cleaned = 0.00241749 Jy
! Component: 2200  -  total flux cleaned = 0.00245104 Jy
! Component: 2250  -  total flux cleaned = 0.00249273 Jy
! Component: 2300  -  total flux cleaned = 0.00255877 Jy
! Component: 2350  -  total flux cleaned = 0.00259147 Jy
! Component: 2400  -  total flux cleaned = 0.00263199 Jy
! Component: 2450  -  total flux cleaned = 0.0026963 Jy
! Component: 2500  -  total flux cleaned = 0.00273621 Jy
! Component: 2550  -  total flux cleaned = 0.00280756 Jy
! Component: 2600  -  total flux cleaned = 0.00286264 Jy
! Component: 2650  -  total flux cleaned = 0.00292522 Jy
! Component: 2700  -  total flux cleaned = 0.00297966 Jy
! Component: 2750  -  total flux cleaned = 0.00304924 Jy
! Component: 2800  -  total flux cleaned = 0.00311067 Jy
! Component: 2850  -  total flux cleaned = 0.00316409 Jy
! Component: 2900  -  total flux cleaned = 0.00322486 Jy
! Component: 2950  -  total flux cleaned = 0.00329285 Jy
! Component: 3000  -  total flux cleaned = 0.00333047 Jy
! Component: 3050  -  total flux cleaned = 0.00339038 Jy
! Component: 3100  -  total flux cleaned = 0.00343514 Jy
! Component: 3150  -  total flux cleaned = 0.00348717 Jy
! Component: 3200  -  total flux cleaned = 0.00353163 Jy
! Component: 3250  -  total flux cleaned = 0.00357592 Jy
! Component: 3300  -  total flux cleaned = 0.00363482 Jy
! Component: 3350  -  total flux cleaned = 0.00368619 Jy
! Component: 3400  -  total flux cleaned = 0.00373743 Jy
! Component: 3450  -  total flux cleaned = 0.00378118 Jy
! Component: 3500  -  total flux cleaned = 0.00383209 Jy
! Component: 3550  -  total flux cleaned = 0.00388289 Jy
! Component: 3600  -  total flux cleaned = 0.00393359 Jy
! Component: 3650  -  total flux cleaned = 0.00397694 Jy
! Component: 3700  -  total flux cleaned = 0.00403456 Jy
! Component: 3750  -  total flux cleaned = 0.00408485 Jy
! Component: 3800  -  total flux cleaned = 0.00414222 Jy
! Component: 3850  -  total flux cleaned = 0.00418519 Jy
! Component: 3900  -  total flux cleaned = 0.00424237 Jy
! Component: 3950  -  total flux cleaned = 0.00429943 Jy
! Component: 4000  -  total flux cleaned = 0.0043493 Jy
! Component: 4050  -  total flux cleaned = 0.00440623 Jy
! Total flux subtracted in 4096 components = 0.00444884 Jy
! Clean residual min=-0.000388 max=0.000426 Jy/beam
! Clean residual mean=0.000013 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.100125 Jy
keep
! Adding 519 model components to the UV plane model.
! The established model now contains 773 components and 0.100125 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1752-3001_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.03 x 55.92 at 0.9662 degrees (North through East)
! Clean map  min=-0.0022393  max=0.057236 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1752-3001_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1752-3001_S_a_map.mod
! Writing 773 model components to file: /vlbi/uf001/uvm//J1752-3001_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1752-3001_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1752-3001_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1752-3001_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1752-3001_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0572363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000172346 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.903341 0.903341 1.80668 3.61337 7.22673 14.4535 28.9069 57.8138
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  332.1 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1752-3001_S_a_dfm.log closed on Sun Jan 13 22:10:34 2019