! Started logfile: /vlbi/uf001/uvm//J1752-2956_S_a_dfm.log on Sun Jan 13 22:10:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1752-2956_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1752-2956_S_a_uvm.fits
! AN table 1: 221 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.882956 visibilities/baseline/integration-bin.
! Found source: J1752-2956
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8781 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1752-2956_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006450Jy  sigma=15.858746
! Fit after  self-cal, rms=0.927101Jy  sigma=14.582276
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.76 mas, bmaj=38.78 mas, bpa=16.15 degrees
! Estimated noise=0.856382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525041 Jy
! Component: 100  -  total flux cleaned = 0.0715853 Jy
! Total flux subtracted in 100 components = 0.0715853 Jy
! Clean residual min=-0.006504 max=0.009209 Jy/beam
! Clean residual mean=-0.000158 rms=0.002770 Jy/beam
! Combined flux in latest and established models = 0.0715853 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0715853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086047Jy  sigma=1.239463
! Fit after  self-cal, rms=0.085060Jy  sigma=1.225911
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.03 mas, bmaj=41.82 mas, bpa=10.32 degrees
! Estimated noise=0.497085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176999 Jy
! Component: 100  -  total flux cleaned = 0.027962 Jy
! Component: 150  -  total flux cleaned = 0.0347677 Jy
! Component: 200  -  total flux cleaned = 0.0395011 Jy
! Total flux subtracted in 200 components = 0.0395011 Jy
! Clean residual min=-0.005962 max=0.006041 Jy/beam
! Clean residual mean=-0.000048 rms=0.002039 Jy/beam
! Combined flux in latest and established models = 0.111086 Jy
! Performing phase self-cal
! Adding 117 model components to the UV plane model.
! The established model now contains 153 components and 0.111086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081188Jy  sigma=1.156578
! Fit after  self-cal, rms=0.080796Jy  sigma=1.150998
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.03 x 41.82 at 10.32 degrees (North through East)
! Clean map  min=-0.0060945  max=0.078118 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     KP        1.07     LA        0.85     
!   OV        1.05     PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     KP        1.11     LA        0.87     
!   OV        0.91     PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     KP        1.13     LA        0.87     
!   OV        0.98     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.080796Jy  sigma=1.150998
! Fit after  self-cal, rms=0.079481Jy  sigma=1.141534
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.08 mas, bmaj=42.28 mas, bpa=9.615 degrees
! Estimated noise=0.482325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337556 Jy
! Component: 100  -  total flux cleaned = 0.00515842 Jy
! Component: 150  -  total flux cleaned = 0.00606117 Jy
! Component: 200  -  total flux cleaned = 0.00666188 Jy
! Total flux subtracted in 200 components = 0.00666188 Jy
! Clean residual min=-0.004856 max=0.004647 Jy/beam
! Clean residual mean=0.000043 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.117748 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 208 components and 0.117748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079318Jy  sigma=1.138985
! Fit after  self-cal, rms=0.079464Jy  sigma=1.137950
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079464Jy  sigma=1.137950
! Fit after  self-cal, rms=0.077149Jy  sigma=1.128193
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.07 mas, bmaj=41.91 mas, bpa=9.435 degrees
! Estimated noise=0.481665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199589 Jy
! Component: 100  -  total flux cleaned = 0.00333197 Jy
! Component: 150  -  total flux cleaned = 0.00389014 Jy
! Component: 200  -  total flux cleaned = 0.00430384 Jy
! Total flux subtracted in 200 components = 0.00430384 Jy
! Clean residual min=-0.002620 max=0.003282 Jy/beam
! Clean residual mean=0.000013 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.122052 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 245 components and 0.122052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077072Jy  sigma=1.127131
! Fit after  self-cal, rms=0.077144Jy  sigma=1.126432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411695 Jy
! Component: 100  -  total flux cleaned = 0.000671504 Jy
! Component: 150  -  total flux cleaned = 0.000887077 Jy
! Component: 200  -  total flux cleaned = 0.00104724 Jy
! Total flux subtracted in 200 components = 0.00104724 Jy
! Clean residual min=-0.002759 max=0.003442 Jy/beam
! Clean residual mean=0.000013 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.123099 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 276 components and 0.123099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077120Jy  sigma=1.126199
! Fit after  self-cal, rms=0.077105Jy  sigma=1.126060
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077105Jy  sigma=1.126060
! Fit after  self-cal, rms=0.075939Jy  sigma=1.125148
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.04 mas, bmaj=41.48 mas, bpa=9.552 degrees
! Estimated noise=0.478996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123171 Jy
! Component: 100  -  total flux cleaned = 0.0017363 Jy
! Component: 150  -  total flux cleaned = 0.00212069 Jy
! Component: 200  -  total flux cleaned = 0.00236973 Jy
! Total flux subtracted in 200 components = 0.00236973 Jy
! Clean residual min=-0.002515 max=0.002989 Jy/beam
! Clean residual mean=0.000009 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.125469 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 299 components and 0.125469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075903Jy  sigma=1.124796
! Fit after  self-cal, rms=0.075909Jy  sigma=1.124705
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258916 Jy
! Component: 100  -  total flux cleaned = 0.000409643 Jy
! Component: 150  -  total flux cleaned = 0.000549866 Jy
! Component: 200  -  total flux cleaned = 0.000670698 Jy
! Total flux subtracted in 200 components = 0.000670698 Jy
! Clean residual min=-0.002582 max=0.003048 Jy/beam
! Clean residual mean=0.000009 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.12614 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 330 components and 0.12614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075897Jy  sigma=1.124612
! Fit after  self-cal, rms=0.075900Jy  sigma=1.124576
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075900Jy  sigma=1.124576
! Fit after  self-cal, rms=0.074868Jy  sigma=1.124384
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.65 mas, bmaj=41.43 mas, bpa=9.092 degrees
! Estimated noise=0.478205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779286 Jy
! Component: 100  -  total flux cleaned = 0.00107798 Jy
! Component: 150  -  total flux cleaned = 0.00134316 Jy
! Component: 200  -  total flux cleaned = 0.0015205 Jy
! Total flux subtracted in 200 components = 0.0015205 Jy
! Clean residual min=-0.002500 max=0.002913 Jy/beam
! Clean residual mean=0.000007 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.12766 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 362 components and 0.12766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074848Jy  sigma=1.124228
! Fit after  self-cal, rms=0.074844Jy  sigma=1.124175
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017144 Jy
! Component: 100  -  total flux cleaned = 0.000263264 Jy
! Component: 150  -  total flux cleaned = 0.000342052 Jy
! Component: 200  -  total flux cleaned = 0.000382558 Jy
! Total flux subtracted in 200 components = 0.000382558 Jy
! Clean residual min=-0.002529 max=0.002916 Jy/beam
! Clean residual mean=0.000008 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.128043 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 383 components and 0.128043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074837Jy  sigma=1.124132
! Fit after  self-cal, rms=0.074842Jy  sigma=1.124117
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.02 mas, bmaj=41.16 mas, bpa=9.728 degrees
! Estimated noise=0.47716 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.02 x 41.16 at 9.728 degrees (North through East)
! Clean map  min=-0.002493  max=0.076168 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.91 mas, bmaj=38.04 mas, bpa=15.36 degrees
! Estimated noise=0.850485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0514543 Jy
! Component: 100  -  total flux cleaned = 0.0734658 Jy
! Component: 150  -  total flux cleaned = 0.0869876 Jy
! Component: 200  -  total flux cleaned = 0.0962081 Jy
! Total flux subtracted in 200 components = 0.0962081 Jy
! Clean residual min=-0.005273 max=0.005967 Jy/beam
! Clean residual mean=-0.000087 rms=0.001864 Jy/beam
! Combined flux in latest and established models = 0.0962081 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 88 model components to the UV plane model.
! The established model now contains 88 components and 0.0962081 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.02 mas, bmaj=41.16 mas, bpa=9.728 degrees
! Estimated noise=0.47716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00839153 Jy
! Component: 100  -  total flux cleaned = 0.0141597 Jy
! Component: 150  -  total flux cleaned = 0.0183539 Jy
! Component: 200  -  total flux cleaned = 0.0214527 Jy
! Total flux subtracted in 200 components = 0.0214527 Jy
! Clean residual min=-0.002786 max=0.002725 Jy/beam
! Clean residual mean=-0.000014 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.117661 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 184 components and 0.117661 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.65 mas, bmaj=41.43 mas, bpa=9.092 degrees
! Estimated noise=0.478205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241118 Jy
! Component: 100  -  total flux cleaned = 0.00421409 Jy
! Component: 150  -  total flux cleaned = 0.00543801 Jy
! Component: 200  -  total flux cleaned = 0.00614054 Jy
! Total flux subtracted in 200 components = 0.00614054 Jy
! Clean residual min=-0.002417 max=0.002862 Jy/beam
! Clean residual mean=-0.000003 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.123801 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604024 Jy
! Component: 100  -  total flux cleaned = 0.00103884 Jy
! Component: 150  -  total flux cleaned = 0.00142015 Jy
! Component: 200  -  total flux cleaned = 0.00171449 Jy
! Total flux subtracted in 200 components = 0.00171449 Jy
! Clean residual min=-0.002481 max=0.002927 Jy/beam
! Clean residual mean=0.000000 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.125516 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 259 components and 0.125516 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.02 mas, bmaj=41.16 mas, bpa=9.728 degrees
! Estimated noise=0.47716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126448 Jy
! Component: 100  -  total flux cleaned = 0.000222966 Jy
! Component: 150  -  total flux cleaned = 0.000297741 Jy
! Component: 200  -  total flux cleaned = 0.000354037 Jy
! Total flux subtracted in 200 components = 0.000354037 Jy
! Clean residual min=-0.002518 max=0.002886 Jy/beam
! Clean residual mean=0.000002 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.12587 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 280 components and 0.12587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074851Jy  sigma=1.124332
! Fit after  self-cal, rms=0.074841Jy  sigma=1.124220
wmodel J1752-2956_S_a_map.mod
! Writing 280 model components to file: J1752-2956_S_a_map.mod
wobs   J1752-2956_S_a_uvs.fits
! Writing UV FITS file: J1752-2956_S_a_uvs.fits
wwins  J1752-2956_S_a_map.win
! wwins: Wrote 1 windows to J1752-2956_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382254 Jy
! Component: 100  -  total flux cleaned = 0.000265033 Jy
! Component: 150  -  total flux cleaned = 0.000200087 Jy
! Component: 200  -  total flux cleaned = 0.000289627 Jy
! Component: 250  -  total flux cleaned = 0.000372693 Jy
! Component: 300  -  total flux cleaned = 0.000398335 Jy
! Component: 350  -  total flux cleaned = 0.000351553 Jy
! Component: 400  -  total flux cleaned = 0.000329561 Jy
! Component: 450  -  total flux cleaned = 0.000287209 Jy
! Component: 500  -  total flux cleaned = 0.000245366 Jy
! Component: 550  -  total flux cleaned = 0.000283655 Jy
! Component: 600  -  total flux cleaned = 0.000338612 Jy
! Component: 650  -  total flux cleaned = 0.000355766 Jy
! Component: 700  -  total flux cleaned = 0.0003899 Jy
! Component: 750  -  total flux cleaned = 0.000406966 Jy
! Component: 800  -  total flux cleaned = 0.000455696 Jy
! Component: 850  -  total flux cleaned = 0.00048735 Jy
! Component: 900  -  total flux cleaned = 0.000518197 Jy
! Component: 950  -  total flux cleaned = 0.000518181 Jy
! Component: 1000  -  total flux cleaned = 0.000532828 Jy
! Component: 1050  -  total flux cleaned = 0.000560678 Jy
! Component: 1100  -  total flux cleaned = 0.000546665 Jy
! Component: 1150  -  total flux cleaned = 0.000519881 Jy
! Component: 1200  -  total flux cleaned = 0.00050657 Jy
! Component: 1250  -  total flux cleaned = 0.000481287 Jy
! Component: 1300  -  total flux cleaned = 0.000543289 Jy
! Component: 1350  -  total flux cleaned = 0.00055523 Jy
! Component: 1400  -  total flux cleaned = 0.000555434 Jy
! Component: 1450  -  total flux cleaned = 0.000613433 Jy
! Component: 1500  -  total flux cleaned = 0.000647009 Jy
! Component: 1550  -  total flux cleaned = 0.000657839 Jy
! Component: 1600  -  total flux cleaned = 0.000700973 Jy
! Component: 1650  -  total flux cleaned = 0.000690794 Jy
! Component: 1700  -  total flux cleaned = 0.000763086 Jy
! Component: 1750  -  total flux cleaned = 0.000803289 Jy
! Component: 1800  -  total flux cleaned = 0.00086251 Jy
! Component: 1850  -  total flux cleaned = 0.000920466 Jy
! Component: 1900  -  total flux cleaned = 0.000958219 Jy
! Component: 1950  -  total flux cleaned = 0.000995448 Jy
! Component: 2000  -  total flux cleaned = 0.00105933 Jy
! Component: 2050  -  total flux cleaned = 0.00114868 Jy
! Component: 2100  -  total flux cleaned = 0.00121008 Jy
! Component: 2150  -  total flux cleaned = 0.001253 Jy
! Component: 2200  -  total flux cleaned = 0.00132073 Jy
! Component: 2250  -  total flux cleaned = 0.00136261 Jy
! Component: 2300  -  total flux cleaned = 0.00141999 Jy
! Component: 2350  -  total flux cleaned = 0.00147653 Jy
! Component: 2400  -  total flux cleaned = 0.00150845 Jy
! Component: 2450  -  total flux cleaned = 0.00153205 Jy
! Component: 2500  -  total flux cleaned = 0.00157089 Jy
! Component: 2550  -  total flux cleaned = 0.00160907 Jy
! Component: 2600  -  total flux cleaned = 0.00160895 Jy
! Component: 2650  -  total flux cleaned = 0.00163871 Jy
! Component: 2700  -  total flux cleaned = 0.00165339 Jy
! Component: 2750  -  total flux cleaned = 0.0016753 Jy
! Component: 2800  -  total flux cleaned = 0.00169675 Jy
! Component: 2850  -  total flux cleaned = 0.00169677 Jy
! Component: 2900  -  total flux cleaned = 0.00170373 Jy
! Component: 2950  -  total flux cleaned = 0.00171759 Jy
! Component: 3000  -  total flux cleaned = 0.00173826 Jy
! Component: 3050  -  total flux cleaned = 0.00178564 Jy
! Component: 3100  -  total flux cleaned = 0.00183926 Jy
! Component: 3150  -  total flux cleaned = 0.00189235 Jy
! Component: 3200  -  total flux cleaned = 0.00193181 Jy
! Component: 3250  -  total flux cleaned = 0.00197749 Jy
! Component: 3300  -  total flux cleaned = 0.00202914 Jy
! Component: 3350  -  total flux cleaned = 0.0020612 Jy
! Component: 3400  -  total flux cleaned = 0.00211835 Jy
! Component: 3450  -  total flux cleaned = 0.00217496 Jy
! Component: 3500  -  total flux cleaned = 0.00221862 Jy
! Component: 3550  -  total flux cleaned = 0.00225577 Jy
! Component: 3600  -  total flux cleaned = 0.00228649 Jy
! Component: 3650  -  total flux cleaned = 0.00232908 Jy
! Component: 3700  -  total flux cleaned = 0.00235322 Jy
! Component: 3750  -  total flux cleaned = 0.00237718 Jy
! Component: 3800  -  total flux cleaned = 0.00240688 Jy
! Component: 3850  -  total flux cleaned = 0.00242455 Jy
! Component: 3900  -  total flux cleaned = 0.00244213 Jy
! Component: 3950  -  total flux cleaned = 0.00247121 Jy
! Component: 4000  -  total flux cleaned = 0.00248272 Jy
! Component: 4050  -  total flux cleaned = 0.0024942 Jy
! Total flux subtracted in 4096 components = 0.00251132 Jy
! Clean residual min=-0.000342 max=0.000308 Jy/beam
! Clean residual mean=0.000003 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.128381 Jy
keep
! Adding 561 model components to the UV plane model.
! The established model now contains 841 components and 0.128381 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1752-2956_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.02 x 41.16 at 9.728 degrees (North through East)
! Clean map  min=-0.001159  max=0.075239 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1752-2956_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1752-2956_S_a_map.mod
! Writing 841 model components to file: /vlbi/uf001/uvm//J1752-2956_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1752-2956_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1752-2956_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1752-2956_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1752-2956_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0752393 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000145289 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.579306 0.579306 1.15861 2.31722 4.63445 9.2689 18.5378 37.0756 74.1512
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  517.861 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1752-2956_S_a_dfm.log closed on Sun Jan 13 22:10:17 2019