! Started logfile: /vlbi/uf001/uva//J1752+1734_S_dfm.log on Mon Jan 14 04:22:34 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1752+1734_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1752+1734_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.843665 visibilities/baseline/integration-bin.
! Found source: J1752+1734
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6492 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1752+1734_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.125216Jy  sigma=23.992596
! Fit after  self-cal, rms=0.561668Jy  sigma=12.140917
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.847 mas, bmaj=6.257 mas, bpa=-8.158 degrees
! Estimated noise=0.622138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.328047 Jy
! Component: 100  -  total flux cleaned = 0.42583 Jy
! Total flux subtracted in 100 components = 0.42583 Jy
! Clean residual min=-0.013883 max=0.039847 Jy/beam
! Clean residual mean=-0.000010 rms=0.004111 Jy/beam
! Combined flux in latest and established models = 0.42583 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.42583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100998Jy  sigma=2.085616
! Fit after  self-cal, rms=0.100893Jy  sigma=2.083979
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0421477 Jy
! Component: 100  -  total flux cleaned = 0.0660391 Jy
! Total flux subtracted in 100 components = 0.0660391 Jy
! Clean residual min=-0.010640 max=0.017922 Jy/beam
! Clean residual mean=0.000011 rms=0.002504 Jy/beam
! Combined flux in latest and established models = 0.491869 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 27 components and 0.491869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076121Jy  sigma=1.539733
! Fit after  self-cal, rms=0.075966Jy  sigma=1.535244
! Inverting map 
! Added new window around map position (-2, -8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183857 Jy
! Component: 100  -  total flux cleaned = 0.0305604 Jy
! Total flux subtracted in 100 components = 0.0305604 Jy
! Clean residual min=-0.009182 max=0.007757 Jy/beam
! Clean residual mean=0.000022 rms=0.001975 Jy/beam
! Combined flux in latest and established models = 0.52243 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 47 components and 0.52243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070095Jy  sigma=1.396746
! Fit after  self-cal, rms=0.069981Jy  sigma=1.394214
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.437 mas, bmaj=7.031 mas, bpa=-9.217 degrees
! Estimated noise=0.424827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129952 Jy
! Component: 100  -  total flux cleaned = 0.0217784 Jy
! Component: 150  -  total flux cleaned = 0.0280969 Jy
! Component: 200  -  total flux cleaned = 0.0328123 Jy
! Total flux subtracted in 200 components = 0.0328123 Jy
! Clean residual min=-0.007124 max=0.008203 Jy/beam
! Clean residual mean=0.000050 rms=0.001941 Jy/beam
! Combined flux in latest and established models = 0.555242 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 85 components and 0.555242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067359Jy  sigma=1.320808
! Fit after  self-cal, rms=0.067277Jy  sigma=1.319558
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.437 x 7.031 at -9.217 degrees (North through East)
! Clean map  min=-0.0069108  max=0.43434 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.03     KP        1.02     
!   LA        0.97     MK        1.04     NL        0.96     OV        0.98     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.98     MK        0.97     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.067277Jy  sigma=1.319558
! Fit after  self-cal, rms=0.065701Jy  sigma=1.279523
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=7.083 mas, bpa=-9.317 degrees
! Estimated noise=0.422457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15, -23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00788867 Jy
! Component: 100  -  total flux cleaned = 0.0123344 Jy
! Component: 150  -  total flux cleaned = 0.014787 Jy
! Component: 200  -  total flux cleaned = 0.0160014 Jy
! Total flux subtracted in 200 components = 0.0160014 Jy
! Clean residual min=-0.006143 max=0.005992 Jy/beam
! Clean residual mean=0.000066 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.571244 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 118 components and 0.571244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064602Jy  sigma=1.256696
! Fit after  self-cal, rms=0.064499Jy  sigma=1.255024
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064499Jy  sigma=1.255024
! Fit after  self-cal, rms=0.059755Jy  sigma=1.153212
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=7.08 mas, bpa=-9.214 degrees
! Estimated noise=0.4229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282687 Jy
! Component: 100  -  total flux cleaned = 0.00441548 Jy
! Component: 150  -  total flux cleaned = 0.00515526 Jy
! Component: 200  -  total flux cleaned = 0.00550961 Jy
! Total flux subtracted in 200 components = 0.00550961 Jy
! Clean residual min=-0.002214 max=0.003629 Jy/beam
! Clean residual mean=0.000007 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.576753 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 0.576753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059577Jy  sigma=1.149875
! Fit after  self-cal, rms=0.059588Jy  sigma=1.149659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324755 Jy
! Component: 100  -  total flux cleaned = 0.00428161 Jy
! Component: 150  -  total flux cleaned = 0.00428152 Jy
! Component: 200  -  total flux cleaned = 0.00418725 Jy
! Total flux subtracted in 200 components = 0.00418725 Jy
! Clean residual min=-0.002033 max=0.002117 Jy/beam
! Clean residual mean=0.000007 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.58094 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 163 components and 0.580941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059393Jy  sigma=1.145291
! Fit after  self-cal, rms=0.059365Jy  sigma=1.144838
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059365Jy  sigma=1.144838
! Fit after  self-cal, rms=0.059452Jy  sigma=1.142919
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.448 mas, bmaj=7.082 mas, bpa=-9.211 degrees
! Estimated noise=0.422771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147709 Jy
! Component: 100  -  total flux cleaned = 0.00192047 Jy
! Component: 150  -  total flux cleaned = 0.00217934 Jy
! Component: 200  -  total flux cleaned = 0.00221189 Jy
! Total flux subtracted in 200 components = 0.00221189 Jy
! Clean residual min=-0.001822 max=0.001729 Jy/beam
! Clean residual mean=-0.000005 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.583153 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 171 components and 0.583153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059387Jy  sigma=1.141607
! Fit after  self-cal, rms=0.059384Jy  sigma=1.141526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044466 Jy
! Component: 100  -  total flux cleaned = 0.000590493 Jy
! Component: 150  -  total flux cleaned = 0.000671483 Jy
! Component: 200  -  total flux cleaned = 0.000748407 Jy
! Total flux subtracted in 200 components = 0.000748407 Jy
! Clean residual min=-0.001710 max=0.001678 Jy/beam
! Clean residual mean=-0.000005 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.583901 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 183 components and 0.583901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059356Jy  sigma=1.141013
! Fit after  self-cal, rms=0.059355Jy  sigma=1.141001
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059355Jy  sigma=1.141001
! Fit after  self-cal, rms=0.059336Jy  sigma=1.140880
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=10.09 mas, bpa=-4.65 degrees
! Estimated noise=0.536148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109157 Jy
! Component: 100  -  total flux cleaned = 0.000107455 Jy
! Component: 150  -  total flux cleaned = 0.000106975 Jy
! Component: 200  -  total flux cleaned = 0.00010634 Jy
! Total flux subtracted in 200 components = 0.00010634 Jy
! Clean residual min=-0.002247 max=0.001784 Jy/beam
! Clean residual mean=-0.000012 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.584007 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 205 components and 0.584007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059329Jy  sigma=1.140834
! Fit after  self-cal, rms=0.059329Jy  sigma=1.140806
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.24171e-05 Jy
! Component: 100  -  total flux cleaned = 0.000120857 Jy
! Component: 150  -  total flux cleaned = 0.000108932 Jy
! Component: 200  -  total flux cleaned = 9.74851e-05 Jy
! Total flux subtracted in 200 components = 9.74851e-05 Jy
! Clean residual min=-0.002226 max=0.001787 Jy/beam
! Clean residual mean=-0.000012 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.584105 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 210 components and 0.584105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059324Jy  sigma=1.140793
! Fit after  self-cal, rms=0.059325Jy  sigma=1.140784
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.447 mas, bmaj=7.083 mas, bpa=-9.215 degrees
! Estimated noise=0.422674 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.447 x 7.083 at -9.215 degrees (North through East)
! Clean map  min=-0.0016218  max=0.4321 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.853 mas, bmaj=6.301 mas, bpa=-8.224 degrees
! Estimated noise=0.621557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.327634 Jy
! Component: 100  -  total flux cleaned = 0.42534 Jy
! Component: 150  -  total flux cleaned = 0.466961 Jy
! Component: 200  -  total flux cleaned = 0.491272 Jy
! Total flux subtracted in 200 components = 0.491272 Jy
! Clean residual min=-0.005374 max=0.013088 Jy/beam
! Clean residual mean=-0.000016 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.491272 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.491272 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.447 mas, bmaj=7.083 mas, bpa=-9.215 degrees
! Estimated noise=0.422674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212629 Jy
! Component: 100  -  total flux cleaned = 0.0353125 Jy
! Component: 150  -  total flux cleaned = 0.0459073 Jy
! Component: 200  -  total flux cleaned = 0.0541714 Jy
! Total flux subtracted in 200 components = 0.0541714 Jy
! Clean residual min=-0.003002 max=0.004875 Jy/beam
! Clean residual mean=-0.000013 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.545443 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 76 components and 0.545443 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00660204 Jy
! Component: 100  -  total flux cleaned = 0.0119151 Jy
! Component: 150  -  total flux cleaned = 0.0162189 Jy
! Component: 200  -  total flux cleaned = 0.0197528 Jy
! Total flux subtracted in 200 components = 0.0197528 Jy
! Clean residual min=-0.002173 max=0.002248 Jy/beam
! Clean residual mean=-0.000008 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.565196 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 109 components and 0.565196 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.409 mas, bmaj=10.09 mas, bpa=-4.65 degrees
! Estimated noise=0.536148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047531 Jy
! Component: 100  -  total flux cleaned = 0.00794618 Jy
! Component: 150  -  total flux cleaned = 0.0102867 Jy
! Component: 200  -  total flux cleaned = 0.0120697 Jy
! Total flux subtracted in 200 components = 0.0120697 Jy
! Clean residual min=-0.002088 max=0.001702 Jy/beam
! Clean residual mean=-0.000014 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.577266 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139436 Jy
! Component: 100  -  total flux cleaned = 0.00250677 Jy
! Component: 150  -  total flux cleaned = 0.00340452 Jy
! Component: 200  -  total flux cleaned = 0.00413424 Jy
! Total flux subtracted in 200 components = 0.00413424 Jy
! Clean residual min=-0.002070 max=0.001617 Jy/beam
! Clean residual mean=-0.000013 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.5814 Jy
! Adding 139 model components to the UV plane model.
! The established model now contains 240 components and 0.5814 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.447 mas, bmaj=7.083 mas, bpa=-9.215 degrees
! Estimated noise=0.422674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000833815 Jy
! Component: 100  -  total flux cleaned = 0.00129 Jy
! Component: 150  -  total flux cleaned = 0.00174186 Jy
! Component: 200  -  total flux cleaned = 0.00211646 Jy
! Total flux subtracted in 200 components = 0.00211646 Jy
! Clean residual min=-0.001808 max=0.001807 Jy/beam
! Clean residual mean=-0.000006 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.583516 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 260 components and 0.583516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059380Jy  sigma=1.142093
! Fit after  self-cal, rms=0.059370Jy  sigma=1.141852
wmodel J1752+1734_S_map.mod
! Writing 260 model components to file: J1752+1734_S_map.mod
wobs   J1752+1734_S_uvs.fits
! Writing UV FITS file: J1752+1734_S_uvs.fits
wwins  J1752+1734_S_map.win
! wwins: Wrote 4 windows to J1752+1734_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173856 Jy
! Component: 100  -  total flux cleaned = 0.000145647 Jy
! Component: 150  -  total flux cleaned = 0.000174261 Jy
! Component: 200  -  total flux cleaned = 0.000284222 Jy
! Component: 250  -  total flux cleaned = 0.000230112 Jy
! Component: 300  -  total flux cleaned = 0.000151934 Jy
! Component: 350  -  total flux cleaned = 2.523e-05 Jy
! Component: 400  -  total flux cleaned = 5.12222e-07 Jy
! Component: 450  -  total flux cleaned = -2.4014e-05 Jy
! Component: 500  -  total flux cleaned = -4.81009e-05 Jy
! Component: 550  -  total flux cleaned = -9.46756e-05 Jy
! Component: 600  -  total flux cleaned = -0.00014028 Jy
! Component: 650  -  total flux cleaned = -0.000162925 Jy
! Component: 700  -  total flux cleaned = -0.000185175 Jy
! Component: 750  -  total flux cleaned = -0.000250447 Jy
! Component: 800  -  total flux cleaned = -0.000314389 Jy
! Component: 850  -  total flux cleaned = -0.000377229 Jy
! Component: 900  -  total flux cleaned = -0.000377205 Jy
! Component: 950  -  total flux cleaned = -0.000479154 Jy
! Component: 1000  -  total flux cleaned = -0.000478992 Jy
! Component: 1050  -  total flux cleaned = -0.000638302 Jy
! Component: 1100  -  total flux cleaned = -0.000638169 Jy
! Component: 1150  -  total flux cleaned = -0.000734582 Jy
! Component: 1200  -  total flux cleaned = -0.000734561 Jy
! Component: 1250  -  total flux cleaned = -0.000734478 Jy
! Component: 1300  -  total flux cleaned = -0.000753277 Jy
! Component: 1350  -  total flux cleaned = -0.000790066 Jy
! Component: 1400  -  total flux cleaned = -0.000735623 Jy
! Component: 1450  -  total flux cleaned = -0.00080751 Jy
! Component: 1500  -  total flux cleaned = -0.000807854 Jy
! Component: 1550  -  total flux cleaned = -0.000825218 Jy
! Component: 1600  -  total flux cleaned = -0.000790615 Jy
! Component: 1650  -  total flux cleaned = -0.000841804 Jy
! Component: 1700  -  total flux cleaned = -0.000841648 Jy
! Component: 1750  -  total flux cleaned = -0.000908927 Jy
! Component: 1800  -  total flux cleaned = -0.000809002 Jy
! Component: 1850  -  total flux cleaned = -0.000875069 Jy
! Component: 1900  -  total flux cleaned = -0.000891503 Jy
! Component: 1950  -  total flux cleaned = -0.000923957 Jy
! Component: 2000  -  total flux cleaned = -0.000972093 Jy
! Component: 2050  -  total flux cleaned = -0.000956359 Jy
! Component: 2100  -  total flux cleaned = -0.00101953 Jy
! Component: 2150  -  total flux cleaned = -0.0010352 Jy
! Component: 2200  -  total flux cleaned = -0.00112815 Jy
! Component: 2250  -  total flux cleaned = -0.00112801 Jy
! Component: 2300  -  total flux cleaned = -0.00117352 Jy
! Component: 2350  -  total flux cleaned = -0.0012337 Jy
! Component: 2400  -  total flux cleaned = -0.00124877 Jy
! Component: 2450  -  total flux cleaned = -0.0012932 Jy
! Component: 2500  -  total flux cleaned = -0.00139572 Jy
! Component: 2550  -  total flux cleaned = -0.00141024 Jy
! Component: 2600  -  total flux cleaned = -0.0015113 Jy
! Component: 2650  -  total flux cleaned = -0.00151129 Jy
! Component: 2700  -  total flux cleaned = -0.00159643 Jy
! Component: 2750  -  total flux cleaned = -0.00162467 Jy
! Component: 2800  -  total flux cleaned = -0.00168058 Jy
! Component: 2850  -  total flux cleaned = -0.00170806 Jy
! Component: 2900  -  total flux cleaned = -0.00177691 Jy
! Component: 2950  -  total flux cleaned = -0.00180434 Jy
! Component: 3000  -  total flux cleaned = -0.001818 Jy
! Component: 3050  -  total flux cleaned = -0.00183153 Jy
! Component: 3100  -  total flux cleaned = -0.00185816 Jy
! Component: 3150  -  total flux cleaned = -0.00193759 Jy
! Component: 3200  -  total flux cleaned = -0.00196382 Jy
! Component: 3250  -  total flux cleaned = -0.0019898 Jy
! Component: 3300  -  total flux cleaned = -0.00197676 Jy
! Component: 3350  -  total flux cleaned = -0.00201521 Jy
! Component: 3400  -  total flux cleaned = -0.0020406 Jy
! Component: 3450  -  total flux cleaned = -0.00207832 Jy
! Component: 3500  -  total flux cleaned = -0.00206582 Jy
! Component: 3550  -  total flux cleaned = -0.0020658 Jy
! Component: 3600  -  total flux cleaned = -0.0020782 Jy
! Component: 3650  -  total flux cleaned = -0.00210266 Jy
! Component: 3700  -  total flux cleaned = -0.00207824 Jy
! Component: 3750  -  total flux cleaned = -0.00213864 Jy
! Component: 3800  -  total flux cleaned = -0.00211459 Jy
! Component: 3850  -  total flux cleaned = -0.00213835 Jy
! Component: 3900  -  total flux cleaned = -0.00212653 Jy
! Component: 3950  -  total flux cleaned = -0.00217363 Jy
! Component: 4000  -  total flux cleaned = -0.00215036 Jy
! Component: 4050  -  total flux cleaned = -0.00218532 Jy
! Total flux subtracted in 4096 components = -0.0021969 Jy
! Clean residual min=-0.000607 max=0.000723 Jy/beam
! Clean residual mean=-0.000003 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.581319 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 558 components and 0.581319 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1752+1734_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.447 x 7.083 at -9.215 degrees (North through East)
! Clean map  min=-0.0015198  max=0.43285 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1752+1734_S_map.fits
wmodel /vlbi/uf001/uva//J1752+1734_S_map.mod
! Writing 558 model components to file: /vlbi/uf001/uva//J1752+1734_S_map.mod
wobs   /vlbi/uf001/uva//J1752+1734_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1752+1734_S_uvs.fits
wwins  /vlbi/uf001/uva//J1752+1734_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1752+1734_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.432847 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216462 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.150027 0.150027 0.300053 0.600107 1.20021 2.40043 4.80085 9.6017 19.2034 38.4068 76.8136
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.432 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1999.65 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1752+1734_S_dfm.log closed on Mon Jan 14 04:22:38 2019