! Started logfile: /vlbi/uf001/uva//J1751-1950_S_b_dfm.log on Mon Jan 14 04:21:52 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1751-1950_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1751-1950_S_b_uva.fits
! AN table 1: 74 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.790541 visibilities/baseline/integration-bin.
! Found source: J1751-1950
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1755 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1751-1950_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007934Jy  sigma=19.104079
! Fit after  self-cal, rms=0.944213Jy  sigma=17.877272
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.25 mas, bmaj=33.66 mas, bpa=7.043 degrees
! Estimated noise=1.00461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0458452 Jy
! Component: 100  -  total flux cleaned = 0.0564508 Jy
! Total flux subtracted in 100 components = 0.0564508 Jy
! Clean residual min=-0.004072 max=0.004172 Jy/beam
! Clean residual mean=0.000016 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.0564508 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0564508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060950Jy  sigma=1.134297
! Fit after  self-cal, rms=0.059570Jy  sigma=1.109960
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.81 mas, bmaj=31.91 mas, bpa=6.688 degrees
! Estimated noise=0.914115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00484293 Jy
! Component: 100  -  total flux cleaned = 0.00609613 Jy
! Component: 150  -  total flux cleaned = 0.00702562 Jy
! Component: 200  -  total flux cleaned = 0.00808237 Jy
! Total flux subtracted in 200 components = 0.00808237 Jy
! Clean residual min=-0.001479 max=0.001499 Jy/beam
! Clean residual mean=0.000016 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.0645331 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 112 components and 0.0645332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058891Jy  sigma=1.097534
! Fit after  self-cal, rms=0.058839Jy  sigma=1.096400
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.81 x 31.91 at 6.688 degrees (North through East)
! Clean map  min=-0.0029319  max=0.057793 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.00     LA        0.90     NL        1.02     
!   OV        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.98     LA        0.97     NL        0.99     
!   OV        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.99     LA        1.07     NL        1.06     
!   OV        1.03     
! 
! 
! Fit before self-cal, rms=0.058839Jy  sigma=1.096400
! Fit after  self-cal, rms=0.058148Jy  sigma=1.093139
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.93 mas, bmaj=31.92 mas, bpa=6.802 degrees
! Estimated noise=0.894335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267132 Jy
! Component: 100  -  total flux cleaned = -0.000470621 Jy
! Component: 150  -  total flux cleaned = -0.000319902 Jy
! Component: 200  -  total flux cleaned = -0.000324772 Jy
! Total flux subtracted in 200 components = -0.000324772 Jy
! Clean residual min=-0.000741 max=0.000753 Jy/beam
! Clean residual mean=0.000002 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.0642084 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 196 components and 0.0642084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058022Jy  sigma=1.091110
! Fit after  self-cal, rms=0.058109Jy  sigma=1.090392
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058109Jy  sigma=1.090392
! Fit after  self-cal, rms=0.058281Jy  sigma=1.088894
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.95 mas, bmaj=31.93 mas, bpa=6.764 degrees
! Estimated noise=0.891787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000283624 Jy
! Component: 100  -  total flux cleaned = 0.00029099 Jy
! Component: 150  -  total flux cleaned = 0.000366166 Jy
! Component: 200  -  total flux cleaned = 0.00047505 Jy
! Total flux subtracted in 200 components = 0.00047505 Jy
! Clean residual min=-0.000592 max=0.000593 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0646835 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 253 components and 0.0646835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058223Jy  sigma=1.088054
! Fit after  self-cal, rms=0.058240Jy  sigma=1.087218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162719 Jy
! Component: 100  -  total flux cleaned = -0.000553716 Jy
! Component: 150  -  total flux cleaned = -0.000521054 Jy
! Component: 200  -  total flux cleaned = -0.000423609 Jy
! Total flux subtracted in 200 components = -0.000423609 Jy
! Clean residual min=-0.000532 max=0.000532 Jy/beam
! Clean residual mean=-0.000002 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0642599 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 305 components and 0.0642599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058200Jy  sigma=1.086612
! Fit after  self-cal, rms=0.058203Jy  sigma=1.086518
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058203Jy  sigma=1.086518
! Fit after  self-cal, rms=0.058076Jy  sigma=1.086422
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.93 mas, bmaj=31.94 mas, bpa=6.797 degrees
! Estimated noise=0.88818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209599 Jy
! Component: 100  -  total flux cleaned = 0.000464072 Jy
! Component: 150  -  total flux cleaned = 0.000757446 Jy
! Component: 200  -  total flux cleaned = 0.000983012 Jy
! Total flux subtracted in 200 components = 0.000983012 Jy
! Clean residual min=-0.000464 max=0.000463 Jy/beam
! Clean residual mean=-0.000002 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.0652429 Jy
selfcal
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 351 components and 0.0652428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058043Jy  sigma=1.085955
! Fit after  self-cal, rms=0.058045Jy  sigma=1.085772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251849 Jy
! Component: 100  -  total flux cleaned = -0.000444228 Jy
! Component: 150  -  total flux cleaned = -0.000545107 Jy
! Component: 200  -  total flux cleaned = -0.000569195 Jy
! Total flux subtracted in 200 components = -0.000569195 Jy
! Clean residual min=-0.000398 max=0.000402 Jy/beam
! Clean residual mean=-0.000002 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.0646737 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 402 components and 0.0646736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058022Jy  sigma=1.085393
! Fit after  self-cal, rms=0.058027Jy  sigma=1.085344
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058027Jy  sigma=1.085344
! Fit after  self-cal, rms=0.057864Jy  sigma=1.085269
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.72 mas, bmaj=32.01 mas, bpa=6.545 degrees
! Estimated noise=0.88991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.91026e-05 Jy
! Component: 100  -  total flux cleaned = 0.000296689 Jy
! Component: 150  -  total flux cleaned = 0.000427113 Jy
! Component: 200  -  total flux cleaned = 0.000512308 Jy
! Total flux subtracted in 200 components = 0.000512308 Jy
! Clean residual min=-0.000350 max=0.000351 Jy/beam
! Clean residual mean=-0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.0651859 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 453 components and 0.0651859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057844Jy  sigma=1.084968
! Fit after  self-cal, rms=0.057849Jy  sigma=1.084937
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.04575e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123003 Jy
! Component: 150  -  total flux cleaned = 0.000123074 Jy
! Component: 200  -  total flux cleaned = 0.000199938 Jy
! Total flux subtracted in 200 components = 0.000199938 Jy
! Clean residual min=-0.000312 max=0.000313 Jy/beam
! Clean residual mean=-0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.0653859 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 487 components and 0.0653858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057835Jy  sigma=1.084676
! Fit after  self-cal, rms=0.057839Jy  sigma=1.084662
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.91 mas, bmaj=31.97 mas, bpa=6.827 degrees
! Estimated noise=0.884785 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.91 x 31.97 at 6.827 degrees (North through East)
! Clean map  min=-0.0038132  max=0.056567 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.34 mas, bmaj=33.73 mas, bpa=7.178 degrees
! Estimated noise=0.971623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0454974 Jy
! Component: 100  -  total flux cleaned = 0.0544736 Jy
! Component: 150  -  total flux cleaned = 0.0572347 Jy
! Component: 200  -  total flux cleaned = 0.0581813 Jy
! Total flux subtracted in 200 components = 0.0581813 Jy
! Clean residual min=-0.002832 max=0.002863 Jy/beam
! Clean residual mean=0.000019 rms=0.001021 Jy/beam
! Combined flux in latest and established models = 0.0581812 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 0.0581812 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.91 mas, bmaj=31.97 mas, bpa=6.827 degrees
! Estimated noise=0.884785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000898037 Jy
! Component: 100  -  total flux cleaned = -0.0011196 Jy
! Component: 150  -  total flux cleaned = -0.00075143 Jy
! Component: 200  -  total flux cleaned = -0.00013999 Jy
! Total flux subtracted in 200 components = -0.00013999 Jy
! Clean residual min=-0.001396 max=0.001389 Jy/beam
! Clean residual mean=0.000005 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0580413 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 146 components and 0.0580413 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.72 mas, bmaj=32.01 mas, bpa=6.545 degrees
! Estimated noise=0.88991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00038428 Jy
! Component: 100  -  total flux cleaned = -0.00090918 Jy
! Component: 150  -  total flux cleaned = -0.00127178 Jy
! Component: 200  -  total flux cleaned = -0.00139748 Jy
! Total flux subtracted in 200 components = -0.00139748 Jy
! Clean residual min=-0.000686 max=0.000687 Jy/beam
! Clean residual mean=0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0566438 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.05404e-05 Jy
! Component: 100  -  total flux cleaned = 7.99812e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120806 Jy
! Component: 200  -  total flux cleaned = 0.000121172 Jy
! Total flux subtracted in 200 components = 0.000121172 Jy
! Clean residual min=-0.000732 max=0.000714 Jy/beam
! Clean residual mean=0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0567649 Jy
! Adding 156 model components to the UV plane model.
! The established model now contains 295 components and 0.056765 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.91 mas, bmaj=31.97 mas, bpa=6.827 degrees
! Estimated noise=0.884785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289871 Jy
! Component: 100  -  total flux cleaned = 0.000508984 Jy
! Component: 150  -  total flux cleaned = 0.000708741 Jy
! Component: 200  -  total flux cleaned = 0.000819628 Jy
! Total flux subtracted in 200 components = 0.000819628 Jy
! Clean residual min=-0.000453 max=0.000448 Jy/beam
! Clean residual mean=0.000001 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0575846 Jy
selfcal
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 367 components and 0.0575846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057862Jy  sigma=1.085194
! Fit after  self-cal, rms=0.057862Jy  sigma=1.085103
wmodel J1751-1950_S_b_map.mod
! Writing 367 model components to file: J1751-1950_S_b_map.mod
wobs   J1751-1950_S_b_uvs.fits
! Writing UV FITS file: J1751-1950_S_b_uvs.fits
wwins  J1751-1950_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J1751-1950_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.91 x 31.97 at 6.827 degrees (North through East)
! Clean map  min=-0.0042089  max=0.05379 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1751-1950_S_b_map.fits
wmodel /vlbi/uf001/uva//J1751-1950_S_b_map.mod
! Writing 367 model components to file: /vlbi/uf001/uva//J1751-1950_S_b_map.mod
wobs   /vlbi/uf001/uva//J1751-1950_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1751-1950_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1751-1950_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0537897 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000169222 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.943799 0.943799 1.8876 3.7752 7.55039 15.1008 30.2016 60.4032
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.053 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  317.864 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1751-1950_S_b_dfm.log closed on Mon Jan 14 04:21:55 2019