! Started logfile: /vlbi/uf001/uva//J1745+1814_S_dfm.log on Mon Jan 14 04:20:10 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1745+1814_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1745+1814_S_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.790815 visibilities/baseline/integration-bin.
! Found source: J1745+1814
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8007 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1745+1814_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013984Jy  sigma=22.663211
! Fit after  self-cal, rms=0.875772Jy  sigma=19.592956
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.901 mas, bmaj=6.58 mas, bpa=-10.64 degrees
! Estimated noise=0.537479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.093926 Jy
! Component: 100  -  total flux cleaned = 0.125491 Jy
! Total flux subtracted in 100 components = 0.125491 Jy
! Clean residual min=-0.005785 max=0.014992 Jy/beam
! Clean residual mean=-0.000012 rms=0.001897 Jy/beam
! Combined flux in latest and established models = 0.125491 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.125491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066819Jy  sigma=1.410481
! Fit after  self-cal, rms=0.066511Jy  sigma=1.404119
! Inverting map 
! Added new window around map position (-1, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178078 Jy
! Component: 100  -  total flux cleaned = 0.0279704 Jy
! Total flux subtracted in 100 components = 0.0279704 Jy
! Clean residual min=-0.003950 max=0.006074 Jy/beam
! Clean residual mean=-0.000002 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.153462 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 0.153462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061112Jy  sigma=1.266727
! Fit after  self-cal, rms=0.060980Jy  sigma=1.263501
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693983 Jy
! Component: 100  -  total flux cleaned = 0.0110546 Jy
! Total flux subtracted in 100 components = 0.0110546 Jy
! Clean residual min=-0.003951 max=0.005119 Jy/beam
! Clean residual mean=0.000003 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.164516 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 46 components and 0.164516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060156Jy  sigma=1.239370
! Fit after  self-cal, rms=0.060132Jy  sigma=1.238523
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=7.233 mas, bpa=-9.587 degrees
! Estimated noise=0.368407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (55, -106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526131 Jy
! Component: 100  -  total flux cleaned = 0.00835103 Jy
! Component: 150  -  total flux cleaned = 0.0106372 Jy
! Component: 200  -  total flux cleaned = 0.0124353 Jy
! Total flux subtracted in 200 components = 0.0124353 Jy
! Clean residual min=-0.003653 max=0.004671 Jy/beam
! Clean residual mean=0.000010 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.176951 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 88 components and 0.176951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059634Jy  sigma=1.225664
! Fit after  self-cal, rms=0.059615Jy  sigma=1.224646
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.487 x 7.233 at -9.587 degrees (North through East)
! Clean map  min=-0.0034083  max=0.12292 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.03     
!   LA        0.95     MK        1.02     NL        0.95     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.02     
!   LA        0.94     MK        1.03     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.01     KP        1.03     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.059615Jy  sigma=1.224646
! Fit after  self-cal, rms=0.059213Jy  sigma=1.219910
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=7.284 mas, bpa=-9.619 degrees
! Estimated noise=0.366184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-104.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034124 Jy
! Component: 100  -  total flux cleaned = 0.00475174 Jy
! Component: 150  -  total flux cleaned = 0.00563214 Jy
! Component: 200  -  total flux cleaned = 0.00644385 Jy
! Total flux subtracted in 200 components = 0.00644385 Jy
! Clean residual min=-0.002953 max=0.002760 Jy/beam
! Clean residual mean=0.000023 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.183395 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 114 components and 0.183395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058939Jy  sigma=1.214925
! Fit after  self-cal, rms=0.058930Jy  sigma=1.214445
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058930Jy  sigma=1.214445
! Fit after  self-cal, rms=0.059810Jy  sigma=1.197184
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=7.243 mas, bpa=-9.284 degrees
! Estimated noise=0.368671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000970276 Jy
! Component: 100  -  total flux cleaned = -0.0011012 Jy
! Component: 150  -  total flux cleaned = -0.00127893 Jy
! Component: 200  -  total flux cleaned = -0.00130987 Jy
! Total flux subtracted in 200 components = -0.00130987 Jy
! Clean residual min=-0.001903 max=0.001935 Jy/beam
! Clean residual mean=0.000010 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.182085 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 146 components and 0.182085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059757Jy  sigma=1.195695
! Fit after  self-cal, rms=0.059791Jy  sigma=1.195532
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145242 Jy
! Component: 100  -  total flux cleaned = -0.000144855 Jy
! Component: 150  -  total flux cleaned = -0.000198857 Jy
! Component: 200  -  total flux cleaned = -0.00027485 Jy
! Total flux subtracted in 200 components = -0.00027485 Jy
! Clean residual min=-0.001793 max=0.001911 Jy/beam
! Clean residual mean=0.000010 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.18181 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 166 components and 0.18181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059768Jy  sigma=1.194984
! Fit after  self-cal, rms=0.059769Jy  sigma=1.194956
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059769Jy  sigma=1.194956
! Fit after  self-cal, rms=0.060226Jy  sigma=1.194510
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.517 mas, bmaj=7.238 mas, bpa=-9.24 degrees
! Estimated noise=0.36876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000835685 Jy
! Component: 100  -  total flux cleaned = -0.00114174 Jy
! Component: 150  -  total flux cleaned = -0.00133264 Jy
! Component: 200  -  total flux cleaned = -0.00140781 Jy
! Total flux subtracted in 200 components = -0.00140781 Jy
! Clean residual min=-0.001774 max=0.001927 Jy/beam
! Clean residual mean=0.000006 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.180403 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 174 components and 0.180403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060201Jy  sigma=1.193892
! Fit after  self-cal, rms=0.060211Jy  sigma=1.193864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (86.5, 80.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171399 Jy
! Component: 100  -  total flux cleaned = 0.00190009 Jy
! Component: 150  -  total flux cleaned = 0.00193081 Jy
! Component: 200  -  total flux cleaned = 0.00198075 Jy
! Total flux subtracted in 200 components = 0.00198075 Jy
! Clean residual min=-0.001611 max=0.001570 Jy/beam
! Clean residual mean=0.000004 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.182383 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 193 components and 0.182383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060158Jy  sigma=1.192538
! Fit after  self-cal, rms=0.060156Jy  sigma=1.192440
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060156Jy  sigma=1.192440
! Fit after  self-cal, rms=0.060351Jy  sigma=1.192263
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.63 mas, bmaj=10.4 mas, bpa=-9.026 degrees
! Estimated noise=0.453771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000135976 Jy
! Component: 100  -  total flux cleaned = -0.000199648 Jy
! Component: 150  -  total flux cleaned = -0.000332037 Jy
! Component: 200  -  total flux cleaned = -0.000492802 Jy
! Total flux subtracted in 200 components = -0.000492802 Jy
! Clean residual min=-0.001817 max=0.001630 Jy/beam
! Clean residual mean=0.000010 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.181891 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 224 components and 0.181891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060342Jy  sigma=1.191977
! Fit after  self-cal, rms=0.060344Jy  sigma=1.191932
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.56541e-05 Jy
! Component: 100  -  total flux cleaned = 2.53396e-05 Jy
! Component: 150  -  total flux cleaned = -6.60743e-05 Jy
! Component: 200  -  total flux cleaned = -0.000115138 Jy
! Total flux subtracted in 200 components = -0.000115138 Jy
! Clean residual min=-0.001718 max=0.001612 Jy/beam
! Clean residual mean=0.000009 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.181776 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 243 components and 0.181776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060343Jy  sigma=1.191913
! Fit after  self-cal, rms=0.060343Jy  sigma=1.191883
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=7.235 mas, bpa=-9.179 degrees
! Estimated noise=0.368872 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 7.235 at -9.179 degrees (North through East)
! Clean map  min=-0.001634  max=0.12215 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.924 mas, bmaj=6.568 mas, bpa=-10.33 degrees
! Estimated noise=0.539266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.094275 Jy
! Component: 100  -  total flux cleaned = 0.127634 Jy
! Component: 150  -  total flux cleaned = 0.144786 Jy
! Component: 200  -  total flux cleaned = 0.154683 Jy
! Total flux subtracted in 200 components = 0.154683 Jy
! Clean residual min=-0.002864 max=0.005005 Jy/beam
! Clean residual mean=-0.000004 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.154683 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.154683 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=7.235 mas, bpa=-9.179 degrees
! Estimated noise=0.368872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693664 Jy
! Component: 100  -  total flux cleaned = 0.0109141 Jy
! Component: 150  -  total flux cleaned = 0.0138397 Jy
! Component: 200  -  total flux cleaned = 0.0161493 Jy
! Total flux subtracted in 200 components = 0.0161493 Jy
! Clean residual min=-0.001853 max=0.001902 Jy/beam
! Clean residual mean=-0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.170832 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.170832 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.63 mas, bmaj=10.4 mas, bpa=-9.026 degrees
! Estimated noise=0.453771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025622 Jy
! Component: 100  -  total flux cleaned = 0.00422744 Jy
! Component: 150  -  total flux cleaned = 0.0055209 Jy
! Component: 200  -  total flux cleaned = 0.00636045 Jy
! Total flux subtracted in 200 components = 0.00636045 Jy
! Clean residual min=-0.001933 max=0.001633 Jy/beam
! Clean residual mean=0.000004 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.177193 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632603 Jy
! Component: 100  -  total flux cleaned = 0.00118632 Jy
! Component: 150  -  total flux cleaned = 0.00165017 Jy
! Component: 200  -  total flux cleaned = 0.00199087 Jy
! Total flux subtracted in 200 components = 0.00199087 Jy
! Clean residual min=-0.001816 max=0.001632 Jy/beam
! Clean residual mean=0.000004 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.179184 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 136 components and 0.179184 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=7.235 mas, bpa=-9.179 degrees
! Estimated noise=0.368872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000866908 Jy
! Component: 100  -  total flux cleaned = 0.001284 Jy
! Component: 150  -  total flux cleaned = 0.00138718 Jy
! Component: 200  -  total flux cleaned = 0.00145009 Jy
! Total flux subtracted in 200 components = 0.00145009 Jy
! Clean residual min=-0.001681 max=0.001634 Jy/beam
! Clean residual mean=0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.180634 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 158 components and 0.180634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060402Jy  sigma=1.193008
! Fit after  self-cal, rms=0.060393Jy  sigma=1.192777
wmodel J1745+1814_S_map.mod
! Writing 158 model components to file: J1745+1814_S_map.mod
wobs   J1745+1814_S_uvs.fits
! Writing UV FITS file: J1745+1814_S_uvs.fits
wwins  J1745+1814_S_map.win
! wwins: Wrote 5 windows to J1745+1814_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.50161e-05 Jy
! Component: 100  -  total flux cleaned = 0.000183029 Jy
! Component: 150  -  total flux cleaned = 0.000209025 Jy
! Component: 200  -  total flux cleaned = 0.000360606 Jy
! Component: 250  -  total flux cleaned = 0.000409211 Jy
! Component: 300  -  total flux cleaned = 0.00055167 Jy
! Component: 350  -  total flux cleaned = 0.000644021 Jy
! Component: 400  -  total flux cleaned = 0.000734529 Jy
! Component: 450  -  total flux cleaned = 0.00088788 Jy
! Component: 500  -  total flux cleaned = 0.000973263 Jy
! Component: 550  -  total flux cleaned = 0.00105677 Jy
! Component: 600  -  total flux cleaned = 0.00113888 Jy
! Component: 650  -  total flux cleaned = 0.00121969 Jy
! Component: 700  -  total flux cleaned = 0.0013187 Jy
! Component: 750  -  total flux cleaned = 0.00137651 Jy
! Component: 800  -  total flux cleaned = 0.00143347 Jy
! Component: 850  -  total flux cleaned = 0.00154631 Jy
! Component: 900  -  total flux cleaned = 0.00163881 Jy
! Component: 950  -  total flux cleaned = 0.0017662 Jy
! Component: 1000  -  total flux cleaned = 0.00189143 Jy
! Component: 1050  -  total flux cleaned = 0.00196254 Jy
! Component: 1100  -  total flux cleaned = 0.00204959 Jy
! Component: 1150  -  total flux cleaned = 0.00210165 Jy
! Component: 1200  -  total flux cleaned = 0.00218662 Jy
! Component: 1250  -  total flux cleaned = 0.00230389 Jy
! Component: 1300  -  total flux cleaned = 0.0023865 Jy
! Component: 1350  -  total flux cleaned = 0.00245146 Jy
! Component: 1400  -  total flux cleaned = 0.00246735 Jy
! Component: 1450  -  total flux cleaned = 0.00256302 Jy
! Component: 1500  -  total flux cleaned = 0.00256306 Jy
! Component: 1550  -  total flux cleaned = 0.00262532 Jy
! Component: 1600  -  total flux cleaned = 0.00271711 Jy
! Component: 1650  -  total flux cleaned = 0.00282301 Jy
! Component: 1700  -  total flux cleaned = 0.00280806 Jy
! Component: 1750  -  total flux cleaned = 0.00289697 Jy
! Component: 1800  -  total flux cleaned = 0.00294097 Jy
! Component: 1850  -  total flux cleaned = 0.00295524 Jy
! Component: 1900  -  total flux cleaned = 0.00295517 Jy
! Component: 1950  -  total flux cleaned = 0.00292677 Jy
! Component: 2000  -  total flux cleaned = 0.00294092 Jy
! Component: 2050  -  total flux cleaned = 0.0029411 Jy
! Component: 2100  -  total flux cleaned = 0.0029965 Jy
! Component: 2150  -  total flux cleaned = 0.00299641 Jy
! Component: 2200  -  total flux cleaned = 0.00301002 Jy
! Component: 2250  -  total flux cleaned = 0.00303674 Jy
! Component: 2300  -  total flux cleaned = 0.00306336 Jy
! Component: 2350  -  total flux cleaned = 0.0030896 Jy
! Component: 2400  -  total flux cleaned = 0.00310272 Jy
! Component: 2450  -  total flux cleaned = 0.00312869 Jy
! Component: 2500  -  total flux cleaned = 0.00314156 Jy
! Component: 2550  -  total flux cleaned = 0.003205 Jy
! Component: 2600  -  total flux cleaned = 0.00321778 Jy
! Component: 2650  -  total flux cleaned = 0.00320533 Jy
! Component: 2700  -  total flux cleaned = 0.00332935 Jy
! Component: 2750  -  total flux cleaned = 0.00332936 Jy
! Component: 2800  -  total flux cleaned = 0.00340255 Jy
! Component: 2850  -  total flux cleaned = 0.00341456 Jy
! Component: 2900  -  total flux cleaned = 0.00339065 Jy
! Component: 2950  -  total flux cleaned = 0.00340253 Jy
! Component: 3000  -  total flux cleaned = 0.00341432 Jy
! Component: 3050  -  total flux cleaned = 0.00344938 Jy
! Component: 3100  -  total flux cleaned = 0.00347271 Jy
! Component: 3150  -  total flux cleaned = 0.00342655 Jy
! Component: 3200  -  total flux cleaned = 0.00348385 Jy
! Component: 3250  -  total flux cleaned = 0.00349534 Jy
! Component: 3300  -  total flux cleaned = 0.00348418 Jy
! Component: 3350  -  total flux cleaned = 0.00355154 Jy
! Component: 3400  -  total flux cleaned = 0.00357373 Jy
! Component: 3450  -  total flux cleaned = 0.0035847 Jy
! Component: 3500  -  total flux cleaned = 0.00357378 Jy
! Component: 3550  -  total flux cleaned = 0.00359572 Jy
! Component: 3600  -  total flux cleaned = 0.00359575 Jy
! Component: 3650  -  total flux cleaned = 0.00366042 Jy
! Component: 3700  -  total flux cleaned = 0.00366046 Jy
! Component: 3750  -  total flux cleaned = 0.00369247 Jy
! Component: 3800  -  total flux cleaned = 0.00370296 Jy
! Component: 3850  -  total flux cleaned = 0.00369248 Jy
! Component: 3900  -  total flux cleaned = 0.00369253 Jy
! Component: 3950  -  total flux cleaned = 0.00370295 Jy
! Component: 4000  -  total flux cleaned = 0.00370298 Jy
! Component: 4050  -  total flux cleaned = 0.00377459 Jy
! Total flux subtracted in 4096 components = 0.00375432 Jy
! Clean residual min=-0.000604 max=0.000628 Jy/beam
! Clean residual mean=0.000000 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.184388 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 444 components and 0.184388 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1745+1814_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 7.235 at -9.179 degrees (North through East)
! Clean map  min=-0.001198  max=0.12275 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1745+1814_S_map.fits
wmodel /vlbi/uf001/uva//J1745+1814_S_map.mod
! Writing 444 model components to file: /vlbi/uf001/uva//J1745+1814_S_map.mod
wobs   /vlbi/uf001/uva//J1745+1814_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1745+1814_S_uvs.fits
wwins  /vlbi/uf001/uva//J1745+1814_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1745+1814_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122752 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180316 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.440684 0.440684 0.881368 1.76274 3.52547 7.05094 14.1019 28.2038 56.4076
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  680.759 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1745+1814_S_dfm.log closed on Mon Jan 14 04:20:14 2019