! Started logfile: /vlbi/uf001/uvm//J1742-3341_S_a_dfm.log on Sun Jan 13 22:08:15 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1742-3341_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1742-3341_S_a_uvm.fits
! AN table 1: 84 integrations on 6 of 6 possible baselines.
! AN table 2: 118 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.895215 visibilities/baseline/integration-bin.
! Found source: J1742-3341
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3255 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1742-3341_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004932Jy  sigma=16.094172
! Fit after  self-cal, rms=0.931435Jy  sigma=14.942956
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.99 mas, bmaj=69.96 mas, bpa=-0.223 degrees
! Estimated noise=1.21209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527503 Jy
! Component: 100  -  total flux cleaned = 0.0654942 Jy
! Total flux subtracted in 100 components = 0.0654942 Jy
! Clean residual min=-0.004999 max=0.005592 Jy/beam
! Clean residual mean=-0.000156 rms=0.002449 Jy/beam
! Combined flux in latest and established models = 0.0654942 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.0654942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068509Jy  sigma=1.062426
! Fit after  self-cal, rms=0.067727Jy  sigma=1.050519
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.61 mas, bmaj=67.4 mas, bpa=-0.7365 degrees
! Estimated noise=0.797168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728493 Jy
! Component: 100  -  total flux cleaned = 0.00908962 Jy
! Component: 150  -  total flux cleaned = 0.0102427 Jy
! Component: 200  -  total flux cleaned = 0.0109792 Jy
! Total flux subtracted in 200 components = 0.0109792 Jy
! Clean residual min=-0.001820 max=0.001808 Jy/beam
! Clean residual mean=-0.000102 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.0764734 Jy
! Performing phase self-cal
! Adding 145 model components to the UV plane model.
! The established model now contains 176 components and 0.0764734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066253Jy  sigma=1.026704
! Fit after  self-cal, rms=0.066032Jy  sigma=1.023875
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 20.61 x 67.4 at -0.7365 degrees (North through East)
! Clean map  min=-0.0046883  max=0.070005 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 120 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.06     LA        0.86     OV        1.30     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.10     KP        1.06     LA        0.90     PT        0.98     
! 
! 
! Correcting IF 2.
!  A total of 120 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.92     LA        1.05     OV        0.91     PT        0.84     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        1.08     LA        0.96     PT        0.98     
! 
! 
! Correcting IF 3.
!  A total of 120 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.93     LA        0.91     OV        1.01     PT        1.12     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KP        1.08     LA        0.96     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.066032Jy  sigma=1.023875
! Fit after  self-cal, rms=0.065851Jy  sigma=1.028081
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.1 mas, bmaj=63.98 mas, bpa=-0.6604 degrees
! Estimated noise=0.833271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109469 Jy
! Component: 100  -  total flux cleaned = -0.00104871 Jy
! Component: 150  -  total flux cleaned = -0.000933557 Jy
! Component: 200  -  total flux cleaned = -0.000908979 Jy
! Total flux subtracted in 200 components = -0.000908979 Jy
! Clean residual min=-0.000446 max=0.000456 Jy/beam
! Clean residual mean=-0.000016 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0755644 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 256 components and 0.0755644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065770Jy  sigma=1.026977
! Fit after  self-cal, rms=0.065952Jy  sigma=1.025446
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065952Jy  sigma=1.025446
! Fit after  self-cal, rms=0.066987Jy  sigma=1.023441
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.13 mas, bmaj=63.95 mas, bpa=-0.7548 degrees
! Estimated noise=0.838591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259533 Jy
! Component: 100  -  total flux cleaned = -0.000471955 Jy
! Component: 150  -  total flux cleaned = -0.00047256 Jy
! Component: 200  -  total flux cleaned = -0.000424784 Jy
! Total flux subtracted in 200 components = -0.000424784 Jy
! Clean residual min=-0.000394 max=0.000390 Jy/beam
! Clean residual mean=-0.000009 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0751396 Jy
selfcal
! Performing phase self-cal
! Adding 105 model components to the UV plane model.
! The established model now contains 357 components and 0.0751396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066951Jy  sigma=1.023036
! Fit after  self-cal, rms=0.067080Jy  sigma=1.022550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113224 Jy
! Component: 100  -  total flux cleaned = -0.000390039 Jy
! Component: 150  -  total flux cleaned = -0.000413021 Jy
! Component: 200  -  total flux cleaned = -0.000476429 Jy
! Total flux subtracted in 200 components = -0.000476429 Jy
! Clean residual min=-0.000353 max=0.000347 Jy/beam
! Clean residual mean=-0.000009 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.0746632 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 423 components and 0.0746632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067060Jy  sigma=1.022349
! Fit after  self-cal, rms=0.067066Jy  sigma=1.022309
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067066Jy  sigma=1.022309
! Fit after  self-cal, rms=0.067923Jy  sigma=1.021782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.11 mas, bmaj=63.93 mas, bpa=-0.7617 degrees
! Estimated noise=0.841832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.66887e-06 Jy
! Component: 100  -  total flux cleaned = -0.000250358 Jy
! Component: 150  -  total flux cleaned = -0.00035273 Jy
! Component: 200  -  total flux cleaned = -0.000429346 Jy
! Total flux subtracted in 200 components = -0.000429346 Jy
! Clean residual min=-0.000316 max=0.000316 Jy/beam
! Clean residual mean=-0.000003 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.0742339 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 507 components and 0.0742339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067903Jy  sigma=1.021610
! Fit after  self-cal, rms=0.068019Jy  sigma=1.021431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204955 Jy
! Component: 100  -  total flux cleaned = 0.000124338 Jy
! Component: 150  -  total flux cleaned = 6.97632e-05 Jy
! Component: 200  -  total flux cleaned = 5.31965e-05 Jy
! Total flux subtracted in 200 components = 5.31965e-05 Jy
! Clean residual min=-0.000287 max=0.000285 Jy/beam
! Clean residual mean=-0.000003 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0742871 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 576 components and 0.0742871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068005Jy  sigma=1.021323
! Fit after  self-cal, rms=0.068017Jy  sigma=1.021298
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068017Jy  sigma=1.021298
! Fit after  self-cal, rms=0.068585Jy  sigma=1.021186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.53 mas, bmaj=63.74 mas, bpa=-0.7009 degrees
! Estimated noise=0.843298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.36398e-05 Jy
! Component: 100  -  total flux cleaned = -9.1348e-05 Jy
! Component: 150  -  total flux cleaned = -0.000164066 Jy
! Component: 200  -  total flux cleaned = -0.000216423 Jy
! Total flux subtracted in 200 components = -0.000216423 Jy
! Clean residual min=-0.000283 max=0.000276 Jy/beam
! Clean residual mean=-0.000003 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0740707 Jy
selfcal
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 661 components and 0.0740707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068568Jy  sigma=1.021081
! Fit after  self-cal, rms=0.068644Jy  sigma=1.021011
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.56886e-05 Jy
! Component: 100  -  total flux cleaned = -8.83997e-06 Jy
! Component: 150  -  total flux cleaned = -5.90973e-05 Jy
! Component: 200  -  total flux cleaned = -9.06375e-05 Jy
! Total flux subtracted in 200 components = -9.06375e-05 Jy
! Clean residual min=-0.000263 max=0.000261 Jy/beam
! Clean residual mean=-0.000002 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.07398 Jy
! Performing phase self-cal
! Adding 109 model components to the UV plane model.
! The established model now contains 716 components and 0.07398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068632Jy  sigma=1.020932
! Fit after  self-cal, rms=0.068645Jy  sigma=1.020912
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=20.07 mas, bmaj=63.9 mas, bpa=-0.7652 degrees
! Estimated noise=0.844095 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 20.07 x 63.9 at -0.7652 degrees (North through East)
! Clean map  min=-0.0038615  max=0.067946 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.79 mas, bmaj=67.6 mas, bpa=-0.284 degrees
! Estimated noise=1.29433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0528574 Jy
! Component: 100  -  total flux cleaned = 0.0593466 Jy
! Component: 150  -  total flux cleaned = 0.0594253 Jy
! Component: 200  -  total flux cleaned = 0.058505 Jy
! Total flux subtracted in 200 components = 0.058505 Jy
! Clean residual min=-0.003238 max=0.003210 Jy/beam
! Clean residual mean=-0.000129 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.058505 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 66 model components to the UV plane model.
! The established model now contains 66 components and 0.058505 Jy
! Inverting map and beam 
! Estimated beam: bmin=20.07 mas, bmaj=63.9 mas, bpa=-0.7652 degrees
! Estimated noise=0.844095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188435 Jy
! Component: 100  -  total flux cleaned = 0.00215531 Jy
! Component: 150  -  total flux cleaned = 0.00206475 Jy
! Component: 200  -  total flux cleaned = 0.00285971 Jy
! Total flux subtracted in 200 components = 0.00285971 Jy
! Clean residual min=-0.001126 max=0.001130 Jy/beam
! Clean residual mean=-0.000034 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0613647 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 176 components and 0.0613647 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.53 mas, bmaj=63.74 mas, bpa=-0.7009 degrees
! Estimated noise=0.843298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261401 Jy
! Component: 100  -  total flux cleaned = 0.000578593 Jy
! Component: 150  -  total flux cleaned = 0.000807018 Jy
! Component: 200  -  total flux cleaned = 0.000885965 Jy
! Total flux subtracted in 200 components = 0.000885965 Jy
! Clean residual min=-0.000620 max=0.000618 Jy/beam
! Clean residual mean=-0.000030 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.0622507 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.50946e-05 Jy
! Component: 100  -  total flux cleaned = -4.469e-06 Jy
! Component: 150  -  total flux cleaned = -6.44682e-05 Jy
! Component: 200  -  total flux cleaned = -0.000146263 Jy
! Total flux subtracted in 200 components = -0.000146263 Jy
! Clean residual min=-0.000448 max=0.000449 Jy/beam
! Clean residual mean=-0.000022 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0621044 Jy
! Adding 206 model components to the UV plane model.
! The established model now contains 379 components and 0.0621044 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=20.07 mas, bmaj=63.9 mas, bpa=-0.7652 degrees
! Estimated noise=0.844095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014924 Jy
! Component: 100  -  total flux cleaned = -0.000316912 Jy
! Component: 150  -  total flux cleaned = -0.00029679 Jy
! Component: 200  -  total flux cleaned = -0.000296541 Jy
! Total flux subtracted in 200 components = -0.000296541 Jy
! Clean residual min=-0.000350 max=0.000349 Jy/beam
! Clean residual mean=-0.000017 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0618079 Jy
selfcal
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 476 components and 0.0618079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068667Jy  sigma=1.021324
! Fit after  self-cal, rms=0.068642Jy  sigma=1.021214
wmodel J1742-3341_S_a_map.mod
! Writing 476 model components to file: J1742-3341_S_a_map.mod
wobs   J1742-3341_S_a_uvs.fits
! Writing UV FITS file: J1742-3341_S_a_uvs.fits
wwins  J1742-3341_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uvm//J1742-3341_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 20.07 x 63.9 at -0.7652 degrees (North through East)
! Clean map  min=-0.0041763  max=0.066773 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1742-3341_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1742-3341_S_a_map.mod
! Writing 476 model components to file: /vlbi/uf001/uvm//J1742-3341_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1742-3341_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1742-3341_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1742-3341_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0667731 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00019266 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.865586 0.865586 1.73117 3.46235 6.92469 13.8494 27.6988 55.3975
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  346.585 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1742-3341_S_a_dfm.log closed on Sun Jan 13 22:08:19 2019