! Started logfile: /vlbi/uf001/uva//J1740+2211_S_dfm.log on Mon Jan 14 04:16:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1740+2211_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1740+2211_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.905864 visibilities/baseline/integration-bin.
! Found source: J1740+2211
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8805 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1740+2211_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027430Jy  sigma=21.043065
! Fit after  self-cal, rms=0.746866Jy  sigma=15.284080
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.822 mas, bmaj=6.088 mas, bpa=-2.659 degrees
! Estimated noise=0.508933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193241 Jy
! Component: 100  -  total flux cleaned = 0.255429 Jy
! Total flux subtracted in 100 components = 0.255429 Jy
! Clean residual min=-0.012604 max=0.029373 Jy/beam
! Clean residual mean=-0.000105 rms=0.003457 Jy/beam
! Combined flux in latest and established models = 0.255429 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.255429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093510Jy  sigma=1.893750
! Fit after  self-cal, rms=0.092761Jy  sigma=1.877068
! Inverting map 
! Added new window around map position (-0.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0340863 Jy
! Component: 100  -  total flux cleaned = 0.0549927 Jy
! Total flux subtracted in 100 components = 0.0549927 Jy
! Clean residual min=-0.007573 max=0.015680 Jy/beam
! Clean residual mean=-0.000064 rms=0.002216 Jy/beam
! Combined flux in latest and established models = 0.310421 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.310421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075044Jy  sigma=1.492029
! Fit after  self-cal, rms=0.074494Jy  sigma=1.479954
! Inverting map 
! Added new window around map position (5, 4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184126 Jy
! Component: 100  -  total flux cleaned = 0.0313718 Jy
! Total flux subtracted in 100 components = 0.0313718 Jy
! Clean residual min=-0.005697 max=0.008252 Jy/beam
! Clean residual mean=-0.000042 rms=0.001606 Jy/beam
! Combined flux in latest and established models = 0.341793 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 49 components and 0.341793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067800Jy  sigma=1.333584
! Fit after  self-cal, rms=0.067440Jy  sigma=1.326992
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.357 mas, bmaj=6.882 mas, bpa=-2.575 degrees
! Estimated noise=0.373013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152212 Jy
! Component: 100  -  total flux cleaned = 0.0255136 Jy
! Component: 150  -  total flux cleaned = 0.0332203 Jy
! Component: 200  -  total flux cleaned = 0.039117 Jy
! Total flux subtracted in 200 components = 0.039117 Jy
! Clean residual min=-0.004893 max=0.005390 Jy/beam
! Clean residual mean=-0.000024 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.38091 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 105 components and 0.38091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063083Jy  sigma=1.231246
! Fit after  self-cal, rms=0.062894Jy  sigma=1.227606
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.357 x 6.882 at -2.575 degrees (North through East)
! Clean map  min=-0.004466  max=0.24662 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.97     KP        0.98     
!   LA        0.95     MK        1.03     NL        1.04     OV        0.97     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        0.98     KP        0.99     
!   LA        0.95     MK        1.04     NL        1.07     OV        0.98     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.95     KP        0.98     
!   LA        0.93     MK        0.99     NL        1.05     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.062894Jy  sigma=1.227606
! Fit after  self-cal, rms=0.061155Jy  sigma=1.192292
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=6.954 mas, bpa=-2.813 degrees
! Estimated noise=0.370853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000959955 Jy
! Component: 100  -  total flux cleaned = 0.00080396 Jy
! Component: 150  -  total flux cleaned = 0.000802779 Jy
! Component: 200  -  total flux cleaned = 0.000799212 Jy
! Total flux subtracted in 200 components = 0.000799212 Jy
! Clean residual min=-0.003153 max=0.002939 Jy/beam
! Clean residual mean=0.000005 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.38171 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.38171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060928Jy  sigma=1.188683
! Fit after  self-cal, rms=0.060917Jy  sigma=1.187882
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060917Jy  sigma=1.187882
! Fit after  self-cal, rms=0.060583Jy  sigma=1.167554
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=6.912 mas, bpa=-2.727 degrees
! Estimated noise=0.370199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000923669 Jy
! Component: 100  -  total flux cleaned = 0.0008722 Jy
! Component: 150  -  total flux cleaned = 0.000826562 Jy
! Component: 200  -  total flux cleaned = 0.000713349 Jy
! Total flux subtracted in 200 components = 0.000713349 Jy
! Clean residual min=-0.002507 max=0.002007 Jy/beam
! Clean residual mean=0.000001 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.382423 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 135 components and 0.382423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060490Jy  sigma=1.165938
! Fit after  self-cal, rms=0.060488Jy  sigma=1.165537
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.79831e-05 Jy
! Component: 100  -  total flux cleaned = -6.07832e-05 Jy
! Component: 150  -  total flux cleaned = -9.21102e-05 Jy
! Component: 200  -  total flux cleaned = -0.000209331 Jy
! Total flux subtracted in 200 components = -0.000209331 Jy
! Clean residual min=-0.002355 max=0.001980 Jy/beam
! Clean residual mean=0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.382214 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.382214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060436Jy  sigma=1.164582
! Fit after  self-cal, rms=0.060421Jy  sigma=1.164297
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060421Jy  sigma=1.164297
! Fit after  self-cal, rms=0.060372Jy  sigma=1.164100
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=6.909 mas, bpa=-2.682 degrees
! Estimated noise=0.370061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000628179 Jy
! Component: 100  -  total flux cleaned = 0.000555672 Jy
! Component: 150  -  total flux cleaned = 0.000461044 Jy
! Component: 200  -  total flux cleaned = 0.000348618 Jy
! Total flux subtracted in 200 components = 0.000348618 Jy
! Clean residual min=-0.002198 max=0.001927 Jy/beam
! Clean residual mean=0.000001 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.382562 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 145 components and 0.382562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060327Jy  sigma=1.163258
! Fit after  self-cal, rms=0.060317Jy  sigma=1.163061
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.38473e-05 Jy
! Component: 100  -  total flux cleaned = -9.01201e-05 Jy
! Component: 150  -  total flux cleaned = -0.00019201 Jy
! Component: 200  -  total flux cleaned = -0.000261629 Jy
! Total flux subtracted in 200 components = -0.000261629 Jy
! Clean residual min=-0.002085 max=0.001905 Jy/beam
! Clean residual mean=0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.3823 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 146 components and 0.3823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060288Jy  sigma=1.162470
! Fit after  self-cal, rms=0.060279Jy  sigma=1.162314
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060279Jy  sigma=1.162314
! Fit after  self-cal, rms=0.060231Jy  sigma=1.162227
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.347 mas, bmaj=10.12 mas, bpa=-0.6318 degrees
! Estimated noise=0.465779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288542 Jy
! Component: 100  -  total flux cleaned = 0.000225933 Jy
! Component: 150  -  total flux cleaned = 0.000182996 Jy
! Component: 200  -  total flux cleaned = 0.000128258 Jy
! Total flux subtracted in 200 components = 0.000128258 Jy
! Clean residual min=-0.001822 max=0.001972 Jy/beam
! Clean residual mean=-0.000000 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.382429 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 153 components and 0.382429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060217Jy  sigma=1.162021
! Fit after  self-cal, rms=0.060208Jy  sigma=1.161860
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.35886e-05 Jy
! Component: 100  -  total flux cleaned = 1.67177e-05 Jy
! Component: 150  -  total flux cleaned = -4.554e-05 Jy
! Component: 200  -  total flux cleaned = -7.24572e-05 Jy
! Total flux subtracted in 200 components = -7.24572e-05 Jy
! Clean residual min=-0.001856 max=0.001935 Jy/beam
! Clean residual mean=0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.382356 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 160 components and 0.382356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060204Jy  sigma=1.161744
! Fit after  self-cal, rms=0.060196Jy  sigma=1.161644
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=6.907 mas, bpa=-2.65 degrees
! Estimated noise=0.369917 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.375 x 6.907 at -2.65 degrees (North through East)
! Clean map  min=-0.0018252  max=0.24165 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=6.093 mas, bpa=-2.779 degrees
! Estimated noise=0.506312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19184 Jy
! Component: 100  -  total flux cleaned = 0.258972 Jy
! Component: 150  -  total flux cleaned = 0.295007 Jy
! Component: 200  -  total flux cleaned = 0.317602 Jy
! Total flux subtracted in 200 components = 0.317602 Jy
! Clean residual min=-0.005253 max=0.012233 Jy/beam
! Clean residual mean=-0.000044 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.317602 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.317602 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=6.907 mas, bpa=-2.65 degrees
! Estimated noise=0.369917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200979 Jy
! Component: 100  -  total flux cleaned = 0.0327169 Jy
! Component: 150  -  total flux cleaned = 0.0411072 Jy
! Component: 200  -  total flux cleaned = 0.0471197 Jy
! Total flux subtracted in 200 components = 0.0471197 Jy
! Clean residual min=-0.002322 max=0.003877 Jy/beam
! Clean residual mean=-0.000012 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.364722 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 72 components and 0.364722 Jy
! Inverting map 
! Added new window around map position (-4.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453837 Jy
! Component: 100  -  total flux cleaned = 0.00787131 Jy
! Component: 150  -  total flux cleaned = 0.0103716 Jy
! Component: 200  -  total flux cleaned = 0.0122599 Jy
! Total flux subtracted in 200 components = 0.0122599 Jy
! Clean residual min=-0.001879 max=0.001735 Jy/beam
! Clean residual mean=-0.000003 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.376982 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 95 components and 0.376982 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.347 mas, bmaj=10.12 mas, bpa=-0.6318 degrees
! Estimated noise=0.465779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232423 Jy
! Component: 100  -  total flux cleaned = 0.00363915 Jy
! Component: 150  -  total flux cleaned = 0.00440832 Jy
! Component: 200  -  total flux cleaned = 0.00467193 Jy
! Total flux subtracted in 200 components = 0.00467193 Jy
! Clean residual min=-0.001915 max=0.001839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.381654 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181903 Jy
! Component: 100  -  total flux cleaned = 0.000260712 Jy
! Component: 150  -  total flux cleaned = 0.000316565 Jy
! Component: 200  -  total flux cleaned = 0.000364937 Jy
! Total flux subtracted in 200 components = 0.000364937 Jy
! Clean residual min=-0.001879 max=0.001883 Jy/beam
! Clean residual mean=-0.000000 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.382019 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 143 components and 0.382019 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=6.907 mas, bpa=-2.65 degrees
! Estimated noise=0.369917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032702 Jy
! Component: 100  -  total flux cleaned = -0.000325349 Jy
! Component: 150  -  total flux cleaned = -0.000325883 Jy
! Component: 200  -  total flux cleaned = -0.000347669 Jy
! Total flux subtracted in 200 components = -0.000347669 Jy
! Clean residual min=-0.001648 max=0.001807 Jy/beam
! Clean residual mean=0.000001 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.381671 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 156 components and 0.381671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060121Jy  sigma=1.159945
! Fit after  self-cal, rms=0.060107Jy  sigma=1.159707
wmodel J1740+2211_S_map.mod
! Writing 156 model components to file: J1740+2211_S_map.mod
wobs   J1740+2211_S_uvs.fits
! Writing UV FITS file: J1740+2211_S_uvs.fits
wwins  J1740+2211_S_map.win
! wwins: Wrote 4 windows to J1740+2211_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114714 Jy
! Component: 100  -  total flux cleaned = 8.42629e-05 Jy
! Component: 150  -  total flux cleaned = 5.74778e-05 Jy
! Component: 200  -  total flux cleaned = 5.79505e-05 Jy
! Component: 250  -  total flux cleaned = 4.86849e-06 Jy
! Component: 300  -  total flux cleaned = 4.59969e-06 Jy
! Component: 350  -  total flux cleaned = 4.56114e-06 Jy
! Component: 400  -  total flux cleaned = -4.45236e-05 Jy
! Component: 450  -  total flux cleaned = -4.40856e-05 Jy
! Component: 500  -  total flux cleaned = -4.37031e-05 Jy
! Component: 550  -  total flux cleaned = 3.36945e-06 Jy
! Component: 600  -  total flux cleaned = 9.46682e-05 Jy
! Component: 650  -  total flux cleaned = 9.49985e-05 Jy
! Component: 700  -  total flux cleaned = 0.000161209 Jy
! Component: 750  -  total flux cleaned = 0.000139223 Jy
! Component: 800  -  total flux cleaned = 9.66958e-05 Jy
! Component: 850  -  total flux cleaned = 0.000117242 Jy
! Component: 900  -  total flux cleaned = 9.66287e-05 Jy
! Component: 950  -  total flux cleaned = 7.62646e-05 Jy
! Component: 1000  -  total flux cleaned = 7.58803e-05 Jy
! Component: 1050  -  total flux cleaned = 1.62395e-05 Jy
! Component: 1100  -  total flux cleaned = 3.58071e-05 Jy
! Component: 1150  -  total flux cleaned = 1.60416e-05 Jy
! Component: 1200  -  total flux cleaned = -6.07397e-05 Jy
! Component: 1250  -  total flux cleaned = -2.27147e-05 Jy
! Component: 1300  -  total flux cleaned = -7.87583e-05 Jy
! Component: 1350  -  total flux cleaned = -4.16422e-05 Jy
! Component: 1400  -  total flux cleaned = 1.3279e-05 Jy
! Component: 1450  -  total flux cleaned = -2.30034e-05 Jy
! Component: 1500  -  total flux cleaned = -0.000112412 Jy
! Component: 1550  -  total flux cleaned = -5.82233e-06 Jy
! Component: 1600  -  total flux cleaned = -2.32691e-05 Jy
! Component: 1650  -  total flux cleaned = -5.76673e-05 Jy
! Component: 1700  -  total flux cleaned = -2.31129e-05 Jy
! Component: 1750  -  total flux cleaned = 1.07813e-05 Jy
! Component: 1800  -  total flux cleaned = -3.99324e-05 Jy
! Component: 1850  -  total flux cleaned = -3.97887e-05 Jy
! Component: 1900  -  total flux cleaned = -3.99036e-05 Jy
! Component: 1950  -  total flux cleaned = -5.62719e-05 Jy
! Component: 2000  -  total flux cleaned = -5.62335e-05 Jy
! Component: 2050  -  total flux cleaned = -2.40524e-05 Jy
! Component: 2100  -  total flux cleaned = -7.20277e-05 Jy
! Component: 2150  -  total flux cleaned = -5.60607e-05 Jy
! Component: 2200  -  total flux cleaned = -4.01588e-05 Jy
! Component: 2250  -  total flux cleaned = -2.43537e-05 Jy
! Component: 2300  -  total flux cleaned = 2.19809e-05 Jy
! Component: 2350  -  total flux cleaned = 3.72099e-05 Jy
! Component: 2400  -  total flux cleaned = 2.22063e-05 Jy
! Component: 2450  -  total flux cleaned = 5.20634e-05 Jy
! Component: 2500  -  total flux cleaned = 8.19908e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000111569 Jy
! Component: 2600  -  total flux cleaned = 0.000170138 Jy
! Component: 2650  -  total flux cleaned = 0.000155726 Jy
! Component: 2700  -  total flux cleaned = 0.000141459 Jy
! Component: 2750  -  total flux cleaned = 0.000184398 Jy
! Component: 2800  -  total flux cleaned = 0.000184108 Jy
! Component: 2850  -  total flux cleaned = 0.000212304 Jy
! Component: 2900  -  total flux cleaned = 0.000212246 Jy
! Component: 2950  -  total flux cleaned = 0.000253813 Jy
! Component: 3000  -  total flux cleaned = 0.000281066 Jy
! Component: 3050  -  total flux cleaned = 0.000281178 Jy
! Component: 3100  -  total flux cleaned = 0.000321965 Jy
! Component: 3150  -  total flux cleaned = 0.000335351 Jy
! Component: 3200  -  total flux cleaned = 0.000362116 Jy
! Component: 3250  -  total flux cleaned = 0.000362108 Jy
! Component: 3300  -  total flux cleaned = 0.000362019 Jy
! Component: 3350  -  total flux cleaned = 0.000388301 Jy
! Component: 3400  -  total flux cleaned = 0.000388308 Jy
! Component: 3450  -  total flux cleaned = 0.000426829 Jy
! Component: 3500  -  total flux cleaned = 0.000477964 Jy
! Component: 3550  -  total flux cleaned = 0.000503338 Jy
! Component: 3600  -  total flux cleaned = 0.000478177 Jy
! Component: 3650  -  total flux cleaned = 0.000528284 Jy
! Component: 3700  -  total flux cleaned = 0.000528281 Jy
! Component: 3750  -  total flux cleaned = 0.00060235 Jy
! Component: 3800  -  total flux cleaned = 0.00060231 Jy
! Component: 3850  -  total flux cleaned = 0.000614577 Jy
! Component: 3900  -  total flux cleaned = 0.0006753 Jy
! Component: 3950  -  total flux cleaned = 0.000723464 Jy
! Component: 4000  -  total flux cleaned = 0.0007594 Jy
! Component: 4050  -  total flux cleaned = 0.000818692 Jy
! Total flux subtracted in 4096 components = 0.000877734 Jy
! Clean residual min=-0.000719 max=0.000761 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.382549 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 473 components and 0.382549 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1740+2211_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.375 x 6.907 at -2.65 degrees (North through East)
! Clean map  min=-0.0013175  max=0.24185 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1740+2211_S_map.fits
wmodel /vlbi/uf001/uva//J1740+2211_S_map.mod
! Writing 473 model components to file: /vlbi/uf001/uva//J1740+2211_S_map.mod
wobs   /vlbi/uf001/uva//J1740+2211_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1740+2211_S_uvs.fits
wwins  /vlbi/uf001/uva//J1740+2211_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1740+2211_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.241852 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000222879 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.276466 0.276466 0.552932 1.10586 2.21173 4.42345 8.84691 17.6938 35.3876 70.7753
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.241 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1085.12 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1740+2211_S_dfm.log closed on Mon Jan 14 04:16:56 2019