! Started logfile: /vlbi/uf001/uvm//J1739+4955_X_a_dfm.log on Sun Jan 13 22:08:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1739+4955_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1739+4955_X_a_uvm.fits ! AN table 1: 9 integrations on 28 of 28 possible baselines. ! AN table 2: 10 integrations on 45 of 45 possible baselines. ! AN table 3: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.801587 visibilities/baseline/integration-bin. ! Found source: J1739+4955 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8484 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1739+4955_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.126910Jy sigma=21.045922 ! Fit after self-cal, rms=0.601972Jy sigma=11.795902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7842 mas, bmaj=1.149 mas, bpa=-4.069 degrees ! Estimated noise=0.68394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31258 Jy ! Component: 100 - total flux cleaned = 0.380924 Jy ! Total flux subtracted in 100 components = 0.380924 Jy ! Clean residual min=-0.014459 max=0.020661 Jy/beam ! Clean residual mean=-0.000012 rms=0.003072 Jy/beam ! Combined flux in latest and established models = 0.380924 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.380924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.220676Jy sigma=1.861373 ! Fit after self-cal, rms=0.220675Jy sigma=1.861329 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020409 Jy ! Component: 100 - total flux cleaned = 0.0293752 Jy ! Total flux subtracted in 100 components = 0.0293752 Jy ! Clean residual min=-0.015974 max=0.019096 Jy/beam ! Clean residual mean=-0.000009 rms=0.003024 Jy/beam ! Combined flux in latest and established models = 0.410299 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.410299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.214475Jy sigma=1.790841 ! Fit after self-cal, rms=0.214470Jy sigma=1.790650 ! Inverting map ! Added new window around map position (0.4, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166174 Jy ! Component: 100 - total flux cleaned = 0.0183501 Jy ! Total flux subtracted in 100 components = 0.0183501 Jy ! Clean residual min=-0.014967 max=0.016085 Jy/beam ! Clean residual mean=-0.000007 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.428649 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.428649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.211821Jy sigma=1.735678 ! Fit after self-cal, rms=0.211709Jy sigma=1.729604 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.475 mas, bpa=-9.38 degrees ! Estimated noise=0.457031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020002 Jy ! Component: 100 - total flux cleaned = 0.0303387 Jy ! Component: 150 - total flux cleaned = 0.0350544 Jy ! Component: 200 - total flux cleaned = 0.0372772 Jy ! Total flux subtracted in 200 components = 0.0372772 Jy ! Clean residual min=-0.013638 max=0.015061 Jy/beam ! Clean residual mean=-0.000001 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 0.465926 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 48 components and 0.465926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.206926Jy sigma=1.667866 ! Fit after self-cal, rms=0.206745Jy sigma=1.659673 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.475 at -9.38 degrees (North through East) ! Clean map min=-0.012953 max=0.4003 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.19 KP 1.07 LA 0.99 ! NL 1.12 OV 0.95 PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.05 HN 0.92 KP 0.77 ! LA 1.05 MK 1.03 NL 1.09 OV 0.94 ! PT 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.00 KP 1.02 LA 1.00 ! MK 0.96 NL 1.14 OV 0.93 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.22 KP 1.07 LA 0.98 ! NL 1.12 OV 0.95 PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.06 HN 0.91 KP 0.78 ! LA 1.03 MK 1.03 NL 1.11 OV 0.94 ! PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.00 KP 1.00 LA 1.00 ! MK 1.02 NL 1.14 OV 0.92 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.20 KP 1.05 LA 1.01 ! NL 1.11 OV 0.95 PT 0.96 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.05 HN 0.93 KP 0.76 ! LA 1.02 MK 1.05 NL 1.09 OV 0.94 ! PT 0.96 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 0.98 KP 1.02 LA 0.99 ! MK 0.99 NL 1.14 OV 0.95 PT 0.93 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.18 KP 1.05 LA 0.98 ! NL 1.12 OV 0.96 PT 0.98 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.05 HN 0.88 KP 0.78 ! LA 1.03 MK 1.06 NL 1.10 OV 0.94 ! PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 0.98 KP 1.02 LA 1.01 ! MK 1.03 NL 1.13 OV 0.93 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.19 KP 1.09 LA 0.99 ! NL 1.12 OV 0.93 PT 0.98 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.06 HN 0.98 KP 0.76 ! LA 1.03 MK 1.05 NL 1.11 OV 0.91 ! PT 0.97 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 HN 1.01 KP 1.02 LA 1.01 ! MK 1.05 NL 1.11 OV 0.92 PT 0.93 ! SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 HN 1.19 KP 1.07 LA 1.00 ! NL 1.12 OV 0.94 PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.02 HN 0.92 KP 0.76 ! LA 1.03 MK 1.05 NL 1.07 OV 0.91 ! PT 0.99 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.01 KP 1.01 LA 1.01 ! MK 1.00 NL 1.13 OV 0.95 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.25 KP 1.05 LA 1.00 ! NL 1.10 OV 0.93 PT 0.96 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.04 HN 0.95 KP 0.74 ! LA 1.01 MK 1.02 NL 1.10 OV 0.94 ! PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 1.01 KP 1.01 LA 1.01 ! MK 1.07 NL 1.12 OV 0.92 PT 0.93 ! SC 0.91 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.18 KP 1.08 LA 0.99 ! NL 1.12 OV 0.95 PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.04 HN 0.92 KP 0.76 ! LA 1.00 MK 1.04 NL 1.12 OV 0.92 ! PT 0.99 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 0.99 KP 1.00 LA 0.98 ! MK 1.02 NL 1.13 OV 0.92 PT 0.95 ! SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.22 KP 1.07 LA 1.00 ! NL 1.11 OV 0.94 PT 0.98 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.05 HN 0.98 KP 0.75 ! LA 1.01 MK 1.06 NL 1.12 OV 0.95 ! PT 0.96 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 0.99 KP 1.00 LA 0.98 ! MK 1.03 NL 1.17 OV 0.93 PT 0.95 ! SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.23 KP 1.06 LA 0.99 ! NL 1.13 OV 0.94 PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.03 HN 0.92 KP 0.76 ! LA 1.03 MK 1.05 NL 1.10 OV 0.94 ! PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.00 KP 1.06 LA 0.97 ! MK 1.02 NL 1.11 OV 0.92 PT 0.95 ! SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 HN 1.15 KP 1.04 LA 0.96 ! NL 1.11 OV 0.95 PT 0.93 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.06 HN 0.91 KP 0.78 ! LA 1.01 MK 1.03 NL 1.12 OV 0.96 ! PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 1.01 KP 1.01 LA 1.00 ! MK 1.00 NL 1.10 OV 0.91 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.27 KP 1.07 LA 0.99 ! NL 1.11 OV 0.94 PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.08 HN 0.94 KP 0.75 ! LA 1.01 MK 1.00 NL 1.11 OV 0.95 ! PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.06 KP 1.02 LA 0.99 ! MK 1.00 NL 1.14 OV 0.94 PT 0.93 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.206745Jy sigma=1.659673 ! Fit after self-cal, rms=0.146917Jy sigma=1.451732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=1.479 mas, bpa=-8.569 degrees ! Estimated noise=0.46468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282093 Jy ! Component: 100 - total flux cleaned = 0.00249529 Jy ! Component: 150 - total flux cleaned = 0.00248793 Jy ! Component: 200 - total flux cleaned = 0.00238263 Jy ! Total flux subtracted in 200 components = 0.00238263 Jy ! Clean residual min=-0.011043 max=0.009529 Jy/beam ! Clean residual mean=-0.000005 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 0.468309 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.468309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145732Jy sigma=1.452034 ! Fit after self-cal, rms=0.145720Jy sigma=1.451242 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145720Jy sigma=1.451242 ! Fit after self-cal, rms=0.068978Jy sigma=1.111719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.052 mas, bmaj=1.483 mas, bpa=-8.58 degrees ! Estimated noise=0.46405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00362621 Jy ! Component: 100 - total flux cleaned = -0.00386879 Jy ! Component: 150 - total flux cleaned = -0.00427922 Jy ! Component: 200 - total flux cleaned = -0.00472871 Jy ! Total flux subtracted in 200 components = -0.00472871 Jy ! Clean residual min=-0.002909 max=0.002960 Jy/beam ! Clean residual mean=0.000001 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.46358 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.46358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068572Jy sigma=1.103131 ! Fit after self-cal, rms=0.068514Jy sigma=1.102392 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00090955 Jy ! Component: 100 - total flux cleaned = -0.00127656 Jy ! Component: 150 - total flux cleaned = -0.00160104 Jy ! Component: 200 - total flux cleaned = -0.00189276 Jy ! Total flux subtracted in 200 components = -0.00189276 Jy ! Clean residual min=-0.002764 max=0.002784 Jy/beam ! Clean residual mean=-0.000000 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.461688 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.461688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068387Jy sigma=1.099785 ! Fit after self-cal, rms=0.068378Jy sigma=1.099714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068378Jy sigma=1.099714 ! Fit after self-cal, rms=0.068410Jy sigma=1.097431 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=1.484 mas, bpa=-8.487 degrees ! Estimated noise=0.463592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226301 Jy ! Component: 100 - total flux cleaned = -0.00289559 Jy ! Component: 150 - total flux cleaned = -0.00315683 Jy ! Component: 200 - total flux cleaned = -0.00333301 Jy ! Total flux subtracted in 200 components = -0.00333301 Jy ! Clean residual min=-0.002568 max=0.002598 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.458355 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.458354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068250Jy sigma=1.094143 ! Fit after self-cal, rms=0.068235Jy sigma=1.093969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272727 Jy ! Component: 100 - total flux cleaned = 0.00314915 Jy ! Component: 150 - total flux cleaned = 0.00310078 Jy ! Component: 200 - total flux cleaned = 0.00305278 Jy ! Total flux subtracted in 200 components = 0.00305278 Jy ! Clean residual min=-0.002438 max=0.002229 Jy/beam ! Clean residual mean=-0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.461407 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 0.461407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068095Jy sigma=1.091165 ! Fit after self-cal, rms=0.068083Jy sigma=1.091026 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068083Jy sigma=1.091026 ! Fit after self-cal, rms=0.068118Jy sigma=1.090052 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=2.764 mas, bpa=-34.95 degrees ! Estimated noise=0.567586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634717 Jy ! Component: 100 - total flux cleaned = -0.000542207 Jy ! Component: 150 - total flux cleaned = -0.000504155 Jy ! Component: 200 - total flux cleaned = -0.000502705 Jy ! Total flux subtracted in 200 components = -0.000502705 Jy ! Clean residual min=-0.002850 max=0.002475 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.460905 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 0.460905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068079Jy sigma=1.089211 ! Fit after self-cal, rms=0.068071Jy sigma=1.089145 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294841 Jy ! Component: 100 - total flux cleaned = -0.000323023 Jy ! Component: 150 - total flux cleaned = -0.000323403 Jy ! Component: 200 - total flux cleaned = -0.000323993 Jy ! Total flux subtracted in 200 components = -0.000323993 Jy ! Clean residual min=-0.002882 max=0.002501 Jy/beam ! Clean residual mean=-0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.460581 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 128 components and 0.460581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068053Jy sigma=1.088831 ! Fit after self-cal, rms=0.068049Jy sigma=1.088804 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.485 mas, bpa=-8.439 degrees ! Estimated noise=0.463164 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.485 at -8.439 degrees (North through East) ! Clean map min=-0.0025609 max=0.40573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=1.145 mas, bpa=-3.816 degrees ! Estimated noise=0.693152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316729 Jy ! Component: 100 - total flux cleaned = 0.385868 Jy ! Component: 150 - total flux cleaned = 0.406388 Jy ! Component: 200 - total flux cleaned = 0.417956 Jy ! Total flux subtracted in 200 components = 0.417956 Jy ! Clean residual min=-0.004722 max=0.006194 Jy/beam ! Clean residual mean=-0.000004 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.417956 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.417956 Jy ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.485 mas, bpa=-8.439 degrees ! Estimated noise=0.463164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133769 Jy ! Component: 100 - total flux cleaned = 0.0215527 Jy ! Component: 150 - total flux cleaned = 0.0269795 Jy ! Component: 200 - total flux cleaned = 0.0308523 Jy ! Total flux subtracted in 200 components = 0.0308523 Jy ! Clean residual min=-0.002728 max=0.002839 Jy/beam ! Clean residual mean=-0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.448808 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 54 components and 0.448808 Jy ! Inverting map ! Added new window around map position (-1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320212 Jy ! Component: 100 - total flux cleaned = 0.00564827 Jy ! Component: 150 - total flux cleaned = 0.0073071 Jy ! Component: 200 - total flux cleaned = 0.00803692 Jy ! Total flux subtracted in 200 components = 0.00803692 Jy ! Clean residual min=-0.002359 max=0.002188 Jy/beam ! Clean residual mean=-0.000000 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.456845 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.456845 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=2.764 mas, bpa=-34.95 degrees ! Estimated noise=0.567586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163234 Jy ! Component: 100 - total flux cleaned = 0.00203683 Jy ! Component: 150 - total flux cleaned = 0.00218012 Jy ! Component: 200 - total flux cleaned = 0.00234292 Jy ! Total flux subtracted in 200 components = 0.00234292 Jy ! Clean residual min=-0.002991 max=0.002426 Jy/beam ! Clean residual mean=-0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.459188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62003e-05 Jy ! Component: 100 - total flux cleaned = 3.50352e-05 Jy ! Component: 150 - total flux cleaned = 3.411e-05 Jy ! Component: 200 - total flux cleaned = 3.40328e-05 Jy ! Total flux subtracted in 200 components = 3.40328e-05 Jy ! Clean residual min=-0.002985 max=0.002373 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.459222 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 120 components and 0.459222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.485 mas, bpa=-8.439 degrees ! Estimated noise=0.463164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000673952 Jy ! Component: 100 - total flux cleaned = -0.000719479 Jy ! Component: 150 - total flux cleaned = -0.000612506 Jy ! Component: 200 - total flux cleaned = -0.000546818 Jy ! Total flux subtracted in 200 components = -0.000546818 Jy ! Clean residual min=-0.002344 max=0.002058 Jy/beam ! Clean residual mean=-0.000000 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.458675 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 0.458675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067882Jy sigma=1.085878 ! Fit after self-cal, rms=0.067842Jy sigma=1.085194 wmodel J1739+4955_X_a_map.mod ! Writing 134 model components to file: J1739+4955_X_a_map.mod wobs J1739+4955_X_a_uvs.fits ! Writing UV FITS file: J1739+4955_X_a_uvs.fits wwins J1739+4955_X_a_map.win ! wwins: Wrote 5 windows to J1739+4955_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000744792 Jy ! Component: 100 - total flux cleaned = -0.00119112 Jy ! Component: 150 - total flux cleaned = -0.0014048 Jy ! Component: 200 - total flux cleaned = -0.00147386 Jy ! Component: 250 - total flux cleaned = -0.00170828 Jy ! Component: 300 - total flux cleaned = -0.00190372 Jy ! Component: 350 - total flux cleaned = -0.00187144 Jy ! Component: 400 - total flux cleaned = -0.00187197 Jy ! Component: 450 - total flux cleaned = -0.00190307 Jy ! Component: 500 - total flux cleaned = -0.0019336 Jy ! Component: 550 - total flux cleaned = -0.00199274 Jy ! Component: 600 - total flux cleaned = -0.00202246 Jy ! Component: 650 - total flux cleaned = -0.00213786 Jy ! Component: 700 - total flux cleaned = -0.00219451 Jy ! Component: 750 - total flux cleaned = -0.00230633 Jy ! Component: 800 - total flux cleaned = -0.0023064 Jy ! Component: 850 - total flux cleaned = -0.00227939 Jy ! Component: 900 - total flux cleaned = -0.00227934 Jy ! Component: 950 - total flux cleaned = -0.00227951 Jy ! Component: 1000 - total flux cleaned = -0.00225317 Jy ! Component: 1050 - total flux cleaned = -0.0021752 Jy ! Component: 1100 - total flux cleaned = -0.00209816 Jy ! Component: 1150 - total flux cleaned = -0.00202211 Jy ! Component: 1200 - total flux cleaned = -0.00199696 Jy ! Component: 1250 - total flux cleaned = -0.00197211 Jy ! Component: 1300 - total flux cleaned = -0.00189833 Jy ! Component: 1350 - total flux cleaned = -0.00194724 Jy ! Component: 1400 - total flux cleaned = -0.00187391 Jy ! Component: 1450 - total flux cleaned = -0.00182619 Jy ! Component: 1500 - total flux cleaned = -0.00180247 Jy ! Component: 1550 - total flux cleaned = -0.00182601 Jy ! Component: 1600 - total flux cleaned = -0.00182603 Jy ! Component: 1650 - total flux cleaned = -0.00177923 Jy ! Component: 1700 - total flux cleaned = -0.00175614 Jy ! Component: 1750 - total flux cleaned = -0.0017104 Jy ! Component: 1800 - total flux cleaned = -0.00177839 Jy ! Component: 1850 - total flux cleaned = -0.0017786 Jy ! Component: 1900 - total flux cleaned = -0.00175618 Jy ! Component: 1950 - total flux cleaned = -0.00177819 Jy ! Component: 2000 - total flux cleaned = -0.00171191 Jy ! Component: 2050 - total flux cleaned = -0.00164626 Jy ! Component: 2100 - total flux cleaned = -0.00164664 Jy ! Component: 2150 - total flux cleaned = -0.0015814 Jy ! Component: 2200 - total flux cleaned = -0.00153846 Jy ! Component: 2250 - total flux cleaned = -0.00147421 Jy ! Component: 2300 - total flux cleaned = -0.00138943 Jy ! Component: 2350 - total flux cleaned = -0.00147367 Jy ! Component: 2400 - total flux cleaned = -0.00130605 Jy ! Component: 2450 - total flux cleaned = -0.00132679 Jy ! Component: 2500 - total flux cleaned = -0.00130611 Jy ! Component: 2550 - total flux cleaned = -0.00134714 Jy ! Component: 2600 - total flux cleaned = -0.00124502 Jy ! Component: 2650 - total flux cleaned = -0.00120433 Jy ! Component: 2700 - total flux cleaned = -0.00118409 Jy ! Component: 2750 - total flux cleaned = -0.00112385 Jy ! Component: 2800 - total flux cleaned = -0.00114379 Jy ! Component: 2850 - total flux cleaned = -0.00104419 Jy ! Component: 2900 - total flux cleaned = -0.000984766 Jy ! Component: 2950 - total flux cleaned = -0.00090613 Jy ! Component: 3000 - total flux cleaned = -0.00102349 Jy ! Component: 3050 - total flux cleaned = -0.000965129 Jy ! Component: 3100 - total flux cleaned = -0.00100376 Jy ! Component: 3150 - total flux cleaned = -0.000926857 Jy ! Component: 3200 - total flux cleaned = -0.000888467 Jy ! Component: 3250 - total flux cleaned = -0.000812141 Jy ! Component: 3300 - total flux cleaned = -0.000869141 Jy ! Component: 3350 - total flux cleaned = -0.000869098 Jy ! Component: 3400 - total flux cleaned = -0.000850394 Jy ! Component: 3450 - total flux cleaned = -0.000719577 Jy ! Component: 3500 - total flux cleaned = -0.000812576 Jy ! Component: 3550 - total flux cleaned = -0.00081256 Jy ! Component: 3600 - total flux cleaned = -0.000701967 Jy ! Component: 3650 - total flux cleaned = -0.000702047 Jy ! Component: 3700 - total flux cleaned = -0.000720409 Jy ! Component: 3750 - total flux cleaned = -0.000665848 Jy ! Component: 3800 - total flux cleaned = -0.000774629 Jy ! Component: 3850 - total flux cleaned = -0.000612264 Jy ! Component: 3900 - total flux cleaned = -0.000720072 Jy ! Component: 3950 - total flux cleaned = -0.000612751 Jy ! Component: 4000 - total flux cleaned = -0.000612857 Jy ! Component: 4050 - total flux cleaned = -0.000648329 Jy ! Total flux subtracted in 4096 components = -0.000542354 Jy ! Clean residual min=-0.001024 max=0.000904 Jy/beam ! Clean residual mean=0.000000 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.458133 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 463 components and 0.458133 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1739+4955_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.485 at -8.439 degrees (North through East) ! Clean map min=-0.0016846 max=0.4064 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1739+4955_X_a_map.fits wmodel /vlbi/uf001/uvm//J1739+4955_X_a_map.mod ! Writing 463 model components to file: /vlbi/uf001/uvm//J1739+4955_X_a_map.mod wobs /vlbi/uf001/uvm//J1739+4955_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1739+4955_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1739+4955_X_a_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J1739+4955_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.406397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000300811 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222057 0.222057 0.444113 0.888227 1.77645 3.55291 7.10582 14.2116 28.4233 56.8465 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.406 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1351.01 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1739+4955_X_a_dfm.log closed on Sun Jan 13 22:08:14 2019