! Started logfile: /vlbi/uf001/uva//J1734+0926_X_dfm.log on Mon Jan 14 04:14:14 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1734+0926_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1734+0926_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97193 visibilities/baseline/integration-bin.
! Found source: J1734+0926
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29916 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1734+0926_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034240Jy  sigma=21.805410
! Fit after  self-cal, rms=0.782356Jy  sigma=16.790017
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7109 mas, bmaj=1.647 mas, bpa=-2.917 degrees
! Estimated noise=0.353831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159489 Jy
! Component: 100  -  total flux cleaned = 0.205652 Jy
! Total flux subtracted in 100 components = 0.205652 Jy
! Clean residual min=-0.023048 max=0.097765 Jy/beam
! Clean residual mean=0.000052 rms=0.005854 Jy/beam
! Combined flux in latest and established models = 0.205652 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.205652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.206727Jy  sigma=3.593763
! Fit after  self-cal, rms=0.206633Jy  sigma=3.590380
! Inverting map 
! Added new window around map position (13, -6.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.080342 Jy
! Component: 100  -  total flux cleaned = 0.116081 Jy
! Total flux subtracted in 100 components = 0.116081 Jy
! Clean residual min=-0.017619 max=0.030476 Jy/beam
! Clean residual mean=0.000030 rms=0.003744 Jy/beam
! Combined flux in latest and established models = 0.321733 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.321733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157729Jy  sigma=2.548851
! Fit after  self-cal, rms=0.150910Jy  sigma=2.379203
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0341302 Jy
! Component: 100  -  total flux cleaned = 0.0566692 Jy
! Total flux subtracted in 100 components = 0.0566692 Jy
! Clean residual min=-0.011472 max=0.028071 Jy/beam
! Clean residual mean=0.000015 rms=0.002727 Jy/beam
! Combined flux in latest and established models = 0.378402 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 0.378402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.134053Jy  sigma=2.032209
! Fit after  self-cal, rms=0.133406Jy  sigma=2.016751
! Inverting map 
! Added new window around map position (11.6, -5.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264953 Jy
! Component: 100  -  total flux cleaned = 0.0437739 Jy
! Total flux subtracted in 100 components = 0.0437739 Jy
! Clean residual min=-0.009058 max=0.024641 Jy/beam
! Clean residual mean=0.000006 rms=0.002220 Jy/beam
! Combined flux in latest and established models = 0.422176 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.422176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121620Jy  sigma=1.783236
! Fit after  self-cal, rms=0.121249Jy  sigma=1.773797
! Inverting map 
! Added new window around map position (1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020823 Jy
! Component: 100  -  total flux cleaned = 0.0346263 Jy
! Total flux subtracted in 100 components = 0.0346263 Jy
! Clean residual min=-0.008365 max=0.009098 Jy/beam
! Clean residual mean=0.000004 rms=0.001875 Jy/beam
! Combined flux in latest and established models = 0.456803 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 55 components and 0.456803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112902Jy  sigma=1.621626
! Fit after  self-cal, rms=0.112787Jy  sigma=1.618622
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8698 mas, bmaj=1.904 mas, bpa=-3.031 degrees
! Estimated noise=0.214874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211896 Jy
! Component: 100  -  total flux cleaned = 0.0371429 Jy
! Component: 150  -  total flux cleaned = 0.0497914 Jy
! Component: 200  -  total flux cleaned = 0.0601597 Jy
! Total flux subtracted in 200 components = 0.0601597 Jy
! Clean residual min=-0.008072 max=0.011873 Jy/beam
! Clean residual mean=0.000000 rms=0.002372 Jy/beam
! Combined flux in latest and established models = 0.516962 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 85 components and 0.516962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103168Jy  sigma=1.492945
! Fit after  self-cal, rms=0.103107Jy  sigma=1.491623
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8698 x 1.904 at -3.031 degrees (North through East)
! Clean map  min=-0.0077651  max=0.21519 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        0.96     KP        0.83     
!   LA        0.95     MK        1.06     NL        1.11     OV        1.01     
!   PT        0.88     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.95     KP        0.82     
!   LA        0.95     MK        1.05     NL        1.10     OV        1.03     
!   PT        0.89     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.98     KP        0.85     
!   LA        0.96     MK        1.08     NL        1.10     OV        1.02     
!   PT        0.88     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.94     KP        0.86     
!   LA        0.96     MK        1.06     NL        1.10     OV        1.01     
!   PT        0.89     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.95     KP        0.85     
!   LA        0.95     MK        1.06     NL        1.14     OV        1.00     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        0.95     KP        0.86     
!   LA        0.96     MK        1.09     NL        1.11     OV        1.01     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        0.96     KP        0.85     
!   LA        0.95     MK        1.07     NL        1.11     OV        0.99     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.97     KP        0.86     
!   LA        0.95     MK        1.09     NL        1.14     OV        0.99     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        0.98     KP        0.86     
!   LA        0.96     MK        1.11     NL        1.11     OV        0.98     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.03     HN        0.97     KP        0.87     
!   LA        0.95     MK        1.11     NL        1.13     OV        1.00     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.98     KP        0.88     
!   LA        0.99     MK        1.12     NL        1.13     OV        1.02     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.98     KP        0.86     
!   LA        0.95     MK        1.14     NL        1.12     OV        1.01     
!   PT        0.92     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.103107Jy  sigma=1.491623
! Fit after  self-cal, rms=0.083391Jy  sigma=1.371809
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=1.938 mas, bpa=-2.294 degrees
! Estimated noise=0.214209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401094 Jy
! Component: 100  -  total flux cleaned = 0.00578079 Jy
! Component: 150  -  total flux cleaned = 0.00661207 Jy
! Component: 200  -  total flux cleaned = 0.00719381 Jy
! Total flux subtracted in 200 components = 0.00719381 Jy
! Clean residual min=-0.007660 max=0.007104 Jy/beam
! Clean residual mean=0.000004 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.524156 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.524156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083012Jy  sigma=1.367416
! Fit after  self-cal, rms=0.082976Jy  sigma=1.366928
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082976Jy  sigma=1.366928
! Fit after  self-cal, rms=0.065566Jy  sigma=1.187924
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8802 mas, bmaj=1.934 mas, bpa=-2.624 degrees
! Estimated noise=0.213915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124146 Jy
! Component: 100  -  total flux cleaned = 0.00099829 Jy
! Component: 150  -  total flux cleaned = 0.000996109 Jy
! Component: 200  -  total flux cleaned = 0.00111249 Jy
! Total flux subtracted in 200 components = 0.00111249 Jy
! Clean residual min=-0.001510 max=0.001996 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.525269 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 121 components and 0.525269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065384Jy  sigma=1.183847
! Fit after  self-cal, rms=0.065359Jy  sigma=1.183476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, -5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172988 Jy
! Component: 100  -  total flux cleaned = 0.00197078 Jy
! Component: 150  -  total flux cleaned = 0.00207781 Jy
! Component: 200  -  total flux cleaned = 0.0022223 Jy
! Total flux subtracted in 200 components = 0.0022223 Jy
! Clean residual min=-0.001474 max=0.001595 Jy/beam
! Clean residual mean=0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.527491 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.527491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065261Jy  sigma=1.181135
! Fit after  self-cal, rms=0.065255Jy  sigma=1.181049
! Inverting map 
! Added new window around map position (12.4, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125472 Jy
! Component: 100  -  total flux cleaned = 0.00149472 Jy
! Component: 150  -  total flux cleaned = 0.00166569 Jy
! Component: 200  -  total flux cleaned = 0.00178489 Jy
! Total flux subtracted in 200 components = 0.00178489 Jy
! Clean residual min=-0.001365 max=0.001362 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.529276 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 155 components and 0.529276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065189Jy  sigma=1.179676
! Fit after  self-cal, rms=0.065187Jy  sigma=1.179620
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065187Jy  sigma=1.179620
! Fit after  self-cal, rms=0.065007Jy  sigma=1.179167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8788 mas, bmaj=1.932 mas, bpa=-2.681 degrees
! Estimated noise=0.213663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124497 Jy
! Component: 100  -  total flux cleaned = 0.00178695 Jy
! Component: 150  -  total flux cleaned = 0.00197387 Jy
! Component: 200  -  total flux cleaned = 0.00207817 Jy
! Total flux subtracted in 200 components = 0.00207817 Jy
! Clean residual min=-0.001197 max=0.001344 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.531354 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 163 components and 0.531354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064959Jy  sigma=1.178152
! Fit after  self-cal, rms=0.064958Jy  sigma=1.178117
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113807 Jy
! Component: 100  -  total flux cleaned = 0.00150137 Jy
! Component: 150  -  total flux cleaned = 0.00160199 Jy
! Component: 200  -  total flux cleaned = 0.00175968 Jy
! Total flux subtracted in 200 components = 0.00175968 Jy
! Clean residual min=-0.001147 max=0.001163 Jy/beam
! Clean residual mean=0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.533114 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 177 components and 0.533114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064918Jy  sigma=1.177226
! Fit after  self-cal, rms=0.064917Jy  sigma=1.177204
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064917Jy  sigma=1.177204
! Fit after  self-cal, rms=0.064859Jy  sigma=1.177065
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.07 mas, bmaj=2.988 mas, bpa=-1.252 degrees
! Estimated noise=0.279783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108707 Jy
! Component: 100  -  total flux cleaned = 0.00180927 Jy
! Component: 150  -  total flux cleaned = 0.00226978 Jy
! Component: 200  -  total flux cleaned = 0.0024699 Jy
! Total flux subtracted in 200 components = 0.0024699 Jy
! Clean residual min=-0.001071 max=0.001149 Jy/beam
! Clean residual mean=0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.535583 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 204 components and 0.535584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064843Jy  sigma=1.176755
! Fit after  self-cal, rms=0.064842Jy  sigma=1.176731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321595 Jy
! Component: 100  -  total flux cleaned = 0.000442698 Jy
! Component: 150  -  total flux cleaned = 0.000524157 Jy
! Component: 200  -  total flux cleaned = 0.000574485 Jy
! Total flux subtracted in 200 components = 0.000574485 Jy
! Clean residual min=-0.001100 max=0.001098 Jy/beam
! Clean residual mean=0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.536158 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 214 components and 0.536158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064837Jy  sigma=1.176646
! Fit after  self-cal, rms=0.064837Jy  sigma=1.176638
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=1.931 mas, bpa=-2.715 degrees
! Estimated noise=0.21353 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8779 x 1.931 at -2.715 degrees (North through East)
! Clean map  min=-0.0010794  max=0.20956 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7143 mas, bmaj=1.664 mas, bpa=-2.72 degrees
! Estimated noise=0.356167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.175061 Jy
! Component: 100  -  total flux cleaned = 0.252973 Jy
! Component: 150  -  total flux cleaned = 0.302123 Jy
! Component: 200  -  total flux cleaned = 0.339294 Jy
! Total flux subtracted in 200 components = 0.339294 Jy
! Clean residual min=-0.008643 max=0.021811 Jy/beam
! Clean residual mean=0.000010 rms=0.002591 Jy/beam
! Combined flux in latest and established models = 0.339294 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.339294 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=1.931 mas, bpa=-2.715 degrees
! Estimated noise=0.21353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0462809 Jy
! Component: 100  -  total flux cleaned = 0.0787776 Jy
! Component: 150  -  total flux cleaned = 0.102383 Jy
! Component: 200  -  total flux cleaned = 0.119923 Jy
! Total flux subtracted in 200 components = 0.119923 Jy
! Clean residual min=-0.004371 max=0.010096 Jy/beam
! Clean residual mean=0.000006 rms=0.001536 Jy/beam
! Combined flux in latest and established models = 0.459217 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 41 components and 0.459217 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134184 Jy
! Component: 100  -  total flux cleaned = 0.02393 Jy
! Component: 150  -  total flux cleaned = 0.032312 Jy
! Component: 200  -  total flux cleaned = 0.039101 Jy
! Total flux subtracted in 200 components = 0.039101 Jy
! Clean residual min=-0.002609 max=0.004051 Jy/beam
! Clean residual mean=0.000003 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.498318 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 83 components and 0.498318 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557419 Jy
! Component: 100  -  total flux cleaned = 0.0101912 Jy
! Component: 150  -  total flux cleaned = 0.0140424 Jy
! Component: 200  -  total flux cleaned = 0.0172911 Jy
! Total flux subtracted in 200 components = 0.0172911 Jy
! Clean residual min=-0.001777 max=0.002078 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.51561 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 115 components and 0.51561 Jy
! Inverting map 
! Added new window around map position (1.6, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277752 Jy
! Component: 100  -  total flux cleaned = 0.00515647 Jy
! Component: 150  -  total flux cleaned = 0.00720971 Jy
! Component: 200  -  total flux cleaned = 0.00899962 Jy
! Total flux subtracted in 200 components = 0.00899962 Jy
! Clean residual min=-0.001397 max=0.001373 Jy/beam
! Clean residual mean=0.000001 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.524609 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 140 components and 0.524609 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.07 mas, bmaj=2.988 mas, bpa=-1.252 degrees
! Estimated noise=0.279783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260828 Jy
! Component: 100  -  total flux cleaned = 0.00449977 Jy
! Component: 150  -  total flux cleaned = 0.00595611 Jy
! Component: 200  -  total flux cleaned = 0.00710185 Jy
! Total flux subtracted in 200 components = 0.00710185 Jy
! Clean residual min=-0.001134 max=0.001124 Jy/beam
! Clean residual mean=0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.531711 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00091643 Jy
! Component: 100  -  total flux cleaned = 0.00166037 Jy
! Component: 150  -  total flux cleaned = 0.00227448 Jy
! Component: 200  -  total flux cleaned = 0.00278585 Jy
! Total flux subtracted in 200 components = 0.00278585 Jy
! Clean residual min=-0.001091 max=0.001088 Jy/beam
! Clean residual mean=0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.534497 Jy
! Adding 102 model components to the UV plane model.
! The established model now contains 226 components and 0.534497 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=1.931 mas, bpa=-2.715 degrees
! Estimated noise=0.21353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000448773 Jy
! Component: 100  -  total flux cleaned = -0.000243711 Jy
! Component: 150  -  total flux cleaned = -3.54237e-05 Jy
! Component: 200  -  total flux cleaned = 8.72085e-05 Jy
! Total flux subtracted in 200 components = 8.72085e-05 Jy
! Clean residual min=-0.001097 max=0.001105 Jy/beam
! Clean residual mean=0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.534584 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 239 components and 0.534584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064805Jy  sigma=1.175607
! Fit after  self-cal, rms=0.064794Jy  sigma=1.175448
wmodel J1734+0926_X_map.mod
! Writing 239 model components to file: J1734+0926_X_map.mod
wobs   J1734+0926_X_uvs.fits
! Writing UV FITS file: J1734+0926_X_uvs.fits
wwins  J1734+0926_X_map.win
! wwins: Wrote 8 windows to J1734+0926_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150132 Jy
! Component: 100  -  total flux cleaned = 0.000389973 Jy
! Component: 150  -  total flux cleaned = 0.00053127 Jy
! Component: 200  -  total flux cleaned = 0.000668652 Jy
! Component: 250  -  total flux cleaned = 0.000735574 Jy
! Component: 300  -  total flux cleaned = 0.000817262 Jy
! Component: 350  -  total flux cleaned = 0.000865061 Jy
! Component: 400  -  total flux cleaned = 0.000896497 Jy
! Component: 450  -  total flux cleaned = 0.000974004 Jy
! Component: 500  -  total flux cleaned = 0.000989307 Jy
! Component: 550  -  total flux cleaned = 0.00106443 Jy
! Component: 600  -  total flux cleaned = 0.00107921 Jy
! Component: 650  -  total flux cleaned = 0.00110863 Jy
! Component: 700  -  total flux cleaned = 0.00112323 Jy
! Component: 750  -  total flux cleaned = 0.00119463 Jy
! Component: 800  -  total flux cleaned = 0.00119434 Jy
! Component: 850  -  total flux cleaned = 0.00119425 Jy
! Component: 900  -  total flux cleaned = 0.0012357 Jy
! Component: 950  -  total flux cleaned = 0.00123581 Jy
! Component: 1000  -  total flux cleaned = 0.00130336 Jy
! Component: 1050  -  total flux cleaned = 0.00135692 Jy
! Component: 1100  -  total flux cleaned = 0.00140974 Jy
! Component: 1150  -  total flux cleaned = 0.00144883 Jy
! Component: 1200  -  total flux cleaned = 0.00152638 Jy
! Component: 1250  -  total flux cleaned = 0.00153891 Jy
! Component: 1300  -  total flux cleaned = 0.00158982 Jy
! Component: 1350  -  total flux cleaned = 0.00166513 Jy
! Component: 1400  -  total flux cleaned = 0.00167766 Jy
! Component: 1450  -  total flux cleaned = 0.00171455 Jy
! Component: 1500  -  total flux cleaned = 0.00171468 Jy
! Component: 1550  -  total flux cleaned = 0.00178748 Jy
! Component: 1600  -  total flux cleaned = 0.00179947 Jy
! Component: 1650  -  total flux cleaned = 0.00179945 Jy
! Component: 1700  -  total flux cleaned = 0.0017994 Jy
! Component: 1750  -  total flux cleaned = 0.00178792 Jy
! Component: 1800  -  total flux cleaned = 0.00183445 Jy
! Component: 1850  -  total flux cleaned = 0.0017998 Jy
! Component: 1900  -  total flux cleaned = 0.00183431 Jy
! Component: 1950  -  total flux cleaned = 0.00185707 Jy
! Component: 2000  -  total flux cleaned = 0.00183447 Jy
! Component: 2050  -  total flux cleaned = 0.00185713 Jy
! Component: 2100  -  total flux cleaned = 0.00186835 Jy
! Component: 2150  -  total flux cleaned = 0.00189047 Jy
! Component: 2200  -  total flux cleaned = 0.00185749 Jy
! Component: 2250  -  total flux cleaned = 0.00189035 Jy
! Component: 2300  -  total flux cleaned = 0.00191204 Jy
! Component: 2350  -  total flux cleaned = 0.00190118 Jy
! Component: 2400  -  total flux cleaned = 0.00193339 Jy
! Component: 2450  -  total flux cleaned = 0.00192265 Jy
! Component: 2500  -  total flux cleaned = 0.00195453 Jy
! Component: 2550  -  total flux cleaned = 0.0019018 Jy
! Component: 2600  -  total flux cleaned = 0.00197525 Jy
! Component: 2650  -  total flux cleaned = 0.00197514 Jy
! Component: 2700  -  total flux cleaned = 0.00201665 Jy
! Component: 2750  -  total flux cleaned = 0.00198567 Jy
! Component: 2800  -  total flux cleaned = 0.00200619 Jy
! Component: 2850  -  total flux cleaned = 0.0020164 Jy
! Component: 2900  -  total flux cleaned = 0.00199608 Jy
! Component: 2950  -  total flux cleaned = 0.00205669 Jy
! Component: 3000  -  total flux cleaned = 0.00204672 Jy
! Component: 3050  -  total flux cleaned = 0.00203685 Jy
! Component: 3100  -  total flux cleaned = 0.00205674 Jy
! Component: 3150  -  total flux cleaned = 0.00209633 Jy
! Component: 3200  -  total flux cleaned = 0.00208647 Jy
! Component: 3250  -  total flux cleaned = 0.00210607 Jy
! Component: 3300  -  total flux cleaned = 0.00212549 Jy
! Component: 3350  -  total flux cleaned = 0.00219329 Jy
! Component: 3400  -  total flux cleaned = 0.00217417 Jy
! Component: 3450  -  total flux cleaned = 0.00213571 Jy
! Component: 3500  -  total flux cleaned = 0.00213572 Jy
! Component: 3550  -  total flux cleaned = 0.0021737 Jy
! Component: 3600  -  total flux cleaned = 0.00220199 Jy
! Component: 3650  -  total flux cleaned = 0.00223958 Jy
! Component: 3700  -  total flux cleaned = 0.00221159 Jy
! Component: 3750  -  total flux cleaned = 0.00223962 Jy
! Component: 3800  -  total flux cleaned = 0.00221186 Jy
! Component: 3850  -  total flux cleaned = 0.00223955 Jy
! Component: 3900  -  total flux cleaned = 0.00221197 Jy
! Component: 3950  -  total flux cleaned = 0.0022486 Jy
! Component: 4000  -  total flux cleaned = 0.00227584 Jy
! Component: 4050  -  total flux cleaned = 0.00227577 Jy
! Total flux subtracted in 4096 components = 0.00230278 Jy
! Clean residual min=-0.000535 max=0.000675 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.536886 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 566 components and 0.536887 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1734+0926_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8779 x 1.931 at -2.715 degrees (North through East)
! Clean map  min=-0.00098358  max=0.21049 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1734+0926_X_map.fits
wmodel /vlbi/uf001/uva//J1734+0926_X_map.mod
! Writing 566 model components to file: /vlbi/uf001/uva//J1734+0926_X_map.mod
wobs   /vlbi/uf001/uva//J1734+0926_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1734+0926_X_uvs.fits
wwins  /vlbi/uf001/uva//J1734+0926_X_map.win
! wwins: Wrote 9 windows to /vlbi/uf001/uva//J1734+0926_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.210494 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000158763 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.226272 0.226272 0.452544 0.905089 1.81018 3.62036 7.24071 14.4814 28.9628 57.9257
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.21 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1325.84 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1734+0926_X_dfm.log closed on Mon Jan 14 04:14:21 2019