! Started logfile: /vlbi/uf001/uvm//J1725+7726_X_a_dfm.log on Sun Jan 13 22:06:51 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1725+7726_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1725+7726_X_a_uvm.fits ! AN table 1: 96 integrations on 36 of 36 possible baselines. ! AN table 2: 87 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.836558 visibilities/baseline/integration-bin. ! Found source: J1725+7726 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 59148 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1725+7726_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.004107Jy sigma=21.749186 ! Fit after self-cal, rms=0.964649Jy sigma=20.930562 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9317 mas, bmaj=1.615 mas, bpa=-21.92 degrees ! Estimated noise=0.338577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250032 Jy ! Component: 100 - total flux cleaned = 0.0317529 Jy ! Total flux subtracted in 100 components = 0.0317529 Jy ! Clean residual min=-0.002428 max=0.003872 Jy/beam ! Clean residual mean=-0.000003 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0317529 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0317529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071179Jy sigma=1.311400 ! Fit after self-cal, rms=0.069827Jy sigma=1.277956 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593101 Jy ! Component: 100 - total flux cleaned = 0.0097633 Jy ! Total flux subtracted in 100 components = 0.0097633 Jy ! Clean residual min=-0.002406 max=0.003741 Jy/beam ! Clean residual mean=-0.000002 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0415162 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0415163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068733Jy sigma=1.254711 ! Fit after self-cal, rms=0.068723Jy sigma=1.253688 ! Inverting map ! Added new window around map position (0.4, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040407 Jy ! Component: 100 - total flux cleaned = 0.00681566 Jy ! Total flux subtracted in 100 components = 0.00681566 Jy ! Clean residual min=-0.002475 max=0.003461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0483319 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.0483319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068221Jy sigma=1.242542 ! Fit after self-cal, rms=0.068180Jy sigma=1.241319 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.279 mas, bmaj=1.877 mas, bpa=-22.38 degrees ! Estimated noise=0.138839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693684 Jy ! Component: 100 - total flux cleaned = 0.0117105 Jy ! Component: 150 - total flux cleaned = 0.0155516 Jy ! Component: 200 - total flux cleaned = 0.0187248 Jy ! Total flux subtracted in 200 components = 0.0187248 Jy ! Clean residual min=-0.002896 max=0.003209 Jy/beam ! Clean residual mean=0.000002 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0670567 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 112 components and 0.0670567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067123Jy sigma=1.217787 ! Fit after self-cal, rms=0.066992Jy sigma=1.214474 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.279 x 1.877 at -22.38 degrees (North through East) ! Clean map min=-0.0030622 max=0.036849 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.14 HN 1.26 KP 0.97 ! LA 0.86 NL 1.28 OV 0.93 PT 0.76 ! SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.90 HN 1.07 KP 1.13 ! LA 0.98 MK 1.10 NL 1.13 OV 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.14 HN 1.05 KP 0.92 ! LA 0.85 NL 1.38 OV 0.97 PT 0.74 ! SC 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.92 HN 1.09 KP 1.11 ! LA 0.95 MK 1.11 NL 1.11 OV 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.09 HN 1.10 KP 0.96 ! LA 0.88 NL 1.36 OV 0.96 PT 0.75 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.98 HN 1.02 KP 1.28 ! LA 0.86 MK 0.92 NL 1.03 OV 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.07 HN 1.03 KP 0.99 ! LA 0.85 NL 1.36 OV 1.00 PT 0.80 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.91 HN 1.07 KP 1.32 ! LA 0.88 MK 1.05 NL 1.00 OV 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.14 HN 1.03 KP 1.02 ! LA 0.84 NL 1.39 OV 0.94 PT 0.73 ! SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 0.95 HN 0.95 KP 1.18 ! LA 0.93 MK 0.97 NL 0.98 OV 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.05 HN 1.02 KP 0.96 ! LA 0.85 NL 1.33 OV 0.91 PT 0.79 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.94 HN 0.97 KP 1.27 ! LA 0.90 MK 0.87 NL 0.97 OV 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.18 HN 1.09 KP 0.94 ! LA 0.87 NL 1.40 OV 0.92 PT 0.78 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.98 HN 0.97 KP 1.17 ! LA 0.96 MK 0.93 NL 1.09 OV 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.06 HN 1.01 KP 0.98 ! LA 0.86 NL 1.25 OV 0.94 PT 0.81 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 0.93 HN 0.90 KP 1.22 ! LA 0.92 MK 0.90 NL 0.97 OV 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.06 HN 0.93 KP 0.93 ! LA 0.86 NL 1.41 OV 0.91 PT 0.78 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 FD 0.95 HN 0.82 KP 1.27 ! LA 0.94 MK 0.90 NL 1.05 OV 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.08 HN 0.92 KP 0.95 ! LA 0.86 NL 1.26 OV 0.88 PT 0.80 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.75 FD 0.97 HN 0.88 KP 1.23 ! LA 0.91 MK 1.02 NL 0.99 OV 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 0.93 KP 0.97 ! LA 0.89 NL 1.23 OV 0.89 PT 0.80 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.73 FD 0.85 HN 0.93 KP 1.18 ! LA 0.93 MK 0.86 NL 1.00 OV 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.98 HN 0.89 KP 0.89 ! LA 0.88 NL 1.26 OV 0.86 PT 0.76 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 0.88 HN 0.85 KP 1.23 ! LA 0.92 MK 0.82 NL 0.95 OV 0.92 ! ! ! Fit before self-cal, rms=0.066992Jy sigma=1.214474 ! Fit after self-cal, rms=0.063817Jy sigma=1.199851 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.271 mas, bmaj=1.887 mas, bpa=-22.01 degrees ! Estimated noise=0.135219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232318 Jy ! Component: 100 - total flux cleaned = 0.00370467 Jy ! Component: 150 - total flux cleaned = 0.00463509 Jy ! Component: 200 - total flux cleaned = 0.00503009 Jy ! Total flux subtracted in 200 components = 0.00503009 Jy ! Clean residual min=-0.002131 max=0.003036 Jy/beam ! Clean residual mean=0.000007 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0720868 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 0.0720868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063707Jy sigma=1.197332 ! Fit after self-cal, rms=0.063873Jy sigma=1.193662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063873Jy sigma=1.193662 ! Fit after self-cal, rms=0.062490Jy sigma=1.178955 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.269 mas, bmaj=1.888 mas, bpa=-23.22 degrees ! Estimated noise=0.135147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986041 Jy ! Component: 100 - total flux cleaned = 0.00128986 Jy ! Component: 150 - total flux cleaned = 0.00147285 Jy ! Component: 200 - total flux cleaned = 0.00157466 Jy ! Total flux subtracted in 200 components = 0.00157466 Jy ! Clean residual min=-0.001797 max=0.002444 Jy/beam ! Clean residual mean=0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0736614 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 154 components and 0.0736614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062470Jy sigma=1.178205 ! Fit after self-cal, rms=0.062745Jy sigma=1.174963 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.8, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257328 Jy ! Component: 100 - total flux cleaned = 0.00410534 Jy ! Component: 150 - total flux cleaned = 0.00498019 Jy ! Component: 200 - total flux cleaned = 0.00553567 Jy ! Total flux subtracted in 200 components = 0.00553567 Jy ! Clean residual min=-0.001560 max=0.002445 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0791971 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 188 components and 0.0791971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062616Jy sigma=1.171815 ! Fit after self-cal, rms=0.062534Jy sigma=1.170626 ! Inverting map ! Added new window around map position (-0.2, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250311 Jy ! Component: 100 - total flux cleaned = 0.00412204 Jy ! Component: 150 - total flux cleaned = 0.00536217 Jy ! Component: 200 - total flux cleaned = 0.00634599 Jy ! Total flux subtracted in 200 components = 0.00634599 Jy ! Clean residual min=-0.001643 max=0.001901 Jy/beam ! Clean residual mean=0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0855431 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 211 components and 0.0855431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062410Jy sigma=1.167197 ! Fit after self-cal, rms=0.062312Jy sigma=1.165960 ! Inverting map ! Added new window around map position (9.4, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020398 Jy ! Component: 100 - total flux cleaned = 0.00350581 Jy ! Component: 150 - total flux cleaned = 0.00467534 Jy ! Component: 200 - total flux cleaned = 0.00564232 Jy ! Total flux subtracted in 200 components = 0.00564232 Jy ! Clean residual min=-0.001474 max=0.001519 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0911854 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 241 components and 0.0911854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062213Jy sigma=1.163585 ! Fit after self-cal, rms=0.062139Jy sigma=1.162815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062139Jy sigma=1.162815 ! Fit after self-cal, rms=0.060399Jy sigma=1.161395 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.266 mas, bmaj=1.883 mas, bpa=-23.57 degrees ! Estimated noise=0.132378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156711 Jy ! Component: 100 - total flux cleaned = 0.00265895 Jy ! Component: 150 - total flux cleaned = 0.00348225 Jy ! Component: 200 - total flux cleaned = 0.00419482 Jy ! Total flux subtracted in 200 components = 0.00419482 Jy ! Clean residual min=-0.001301 max=0.001397 Jy/beam ! Clean residual mean=0.000004 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0953802 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 256 components and 0.0953802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060338Jy sigma=1.159696 ! Fit after self-cal, rms=0.060303Jy sigma=1.158980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155111 Jy ! Component: 100 - total flux cleaned = 0.00266859 Jy ! Component: 150 - total flux cleaned = 0.00330607 Jy ! Component: 200 - total flux cleaned = 0.00383136 Jy ! Total flux subtracted in 200 components = 0.00383136 Jy ! Clean residual min=-0.001296 max=0.001292 Jy/beam ! Clean residual mean=0.000003 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.0992116 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 283 components and 0.0992115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060240Jy sigma=1.157479 ! Fit after self-cal, rms=0.060208Jy sigma=1.157103 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060208Jy sigma=1.157103 ! Fit after self-cal, rms=0.059242Jy sigma=1.156689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=2.833 mas, bpa=-41.37 degrees ! Estimated noise=0.151784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184404 Jy ! Component: 100 - total flux cleaned = 0.00315048 Jy ! Component: 150 - total flux cleaned = 0.00416224 Jy ! Component: 200 - total flux cleaned = 0.00470517 Jy ! Total flux subtracted in 200 components = 0.00470517 Jy ! Clean residual min=-0.001538 max=0.001751 Jy/beam ! Clean residual mean=0.000005 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.103917 Jy selfcal ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 340 components and 0.103917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059195Jy sigma=1.155504 ! Fit after self-cal, rms=0.059145Jy sigma=1.154997 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117087 Jy ! Component: 100 - total flux cleaned = 0.0016648 Jy ! Component: 150 - total flux cleaned = 0.00211123 Jy ! Component: 200 - total flux cleaned = 0.00249925 Jy ! Total flux subtracted in 200 components = 0.00249925 Jy ! Clean residual min=-0.001493 max=0.001843 Jy/beam ! Clean residual mean=0.000005 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.106416 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 359 components and 0.106416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059113Jy sigma=1.154384 ! Fit after self-cal, rms=0.059084Jy sigma=1.153989 ! Inverting map ! Added new window around map position (8.2, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743735 Jy ! Component: 100 - total flux cleaned = 0.00125444 Jy ! Component: 150 - total flux cleaned = 0.00185709 Jy ! Component: 200 - total flux cleaned = 0.00239439 Jy ! Total flux subtracted in 200 components = 0.00239439 Jy ! Clean residual min=-0.001337 max=0.001430 Jy/beam ! Clean residual mean=0.000006 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.10881 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 384 components and 0.10881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059036Jy sigma=1.153136 ! Fit after self-cal, rms=0.058999Jy sigma=1.152640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.262 mas, bmaj=1.878 mas, bpa=-23.68 degrees ! Estimated noise=0.131139 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.262 x 1.878 at -23.68 degrees (North through East) ! Clean map min=-0.0013873 max=0.03363 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9116 mas, bmaj=1.605 mas, bpa=-22.51 degrees ! Estimated noise=0.319515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239822 Jy ! Component: 100 - total flux cleaned = 0.0318997 Jy ! Component: 150 - total flux cleaned = 0.0379867 Jy ! Component: 200 - total flux cleaned = 0.0432021 Jy ! Total flux subtracted in 200 components = 0.0432021 Jy ! Clean residual min=-0.002406 max=0.003222 Jy/beam ! Clean residual mean=-0.000000 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0432021 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.0432021 Jy ! Inverting map and beam ! Estimated beam: bmin=1.262 mas, bmaj=1.878 mas, bpa=-23.68 degrees ! Estimated noise=0.131139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00802799 Jy ! Component: 100 - total flux cleaned = 0.0143621 Jy ! Component: 150 - total flux cleaned = 0.0196908 Jy ! Component: 200 - total flux cleaned = 0.0242488 Jy ! Total flux subtracted in 200 components = 0.0242488 Jy ! Clean residual min=-0.002457 max=0.002874 Jy/beam ! Clean residual mean=0.000005 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0674509 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 106 components and 0.0674509 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=2.833 mas, bpa=-41.37 degrees ! Estimated noise=0.151784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621127 Jy ! Component: 100 - total flux cleaned = 0.0110937 Jy ! Component: 150 - total flux cleaned = 0.015143 Jy ! Component: 200 - total flux cleaned = 0.0184395 Jy ! Total flux subtracted in 200 components = 0.0184395 Jy ! Clean residual min=-0.002459 max=0.002562 Jy/beam ! Clean residual mean=0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0858904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247655 Jy ! Component: 100 - total flux cleaned = 0.00474157 Jy ! Component: 150 - total flux cleaned = 0.00675892 Jy ! Component: 200 - total flux cleaned = 0.00856436 Jy ! Total flux subtracted in 200 components = 0.00856436 Jy ! Clean residual min=-0.001956 max=0.001995 Jy/beam ! Clean residual mean=0.000006 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0944548 Jy ! Adding 153 model components to the UV plane model. ! The established model now contains 246 components and 0.0944547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.262 mas, bmaj=1.878 mas, bpa=-23.68 degrees ! Estimated noise=0.131139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168204 Jy ! Component: 100 - total flux cleaned = 0.00313655 Jy ! Component: 150 - total flux cleaned = 0.00430237 Jy ! Component: 200 - total flux cleaned = 0.00542894 Jy ! Total flux subtracted in 200 components = 0.00542894 Jy ! Clean residual min=-0.001378 max=0.001370 Jy/beam ! Clean residual mean=0.000003 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0998837 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 278 components and 0.0998837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059097Jy sigma=1.155351 ! Fit after self-cal, rms=0.059021Jy sigma=1.154031 wmodel J1725+7726_X_a_map.mod ! Writing 278 model components to file: J1725+7726_X_a_map.mod wobs J1725+7726_X_a_uvs.fits ! Writing UV FITS file: J1725+7726_X_a_uvs.fits wwins J1725+7726_X_a_map.win ! wwins: Wrote 8 windows to J1725+7726_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.13957e-05 Jy ! Component: 100 - total flux cleaned = 0.000220516 Jy ! Component: 150 - total flux cleaned = 0.00051607 Jy ! Component: 200 - total flux cleaned = 0.000687237 Jy ! Component: 250 - total flux cleaned = 0.000872009 Jy ! Component: 300 - total flux cleaned = 0.00106982 Jy ! Component: 350 - total flux cleaned = 0.00126263 Jy ! Component: 400 - total flux cleaned = 0.00141689 Jy ! Component: 450 - total flux cleaned = 0.00156807 Jy ! Component: 500 - total flux cleaned = 0.00163403 Jy ! Component: 550 - total flux cleaned = 0.00168241 Jy ! Component: 600 - total flux cleaned = 0.00172991 Jy ! Component: 650 - total flux cleaned = 0.00172988 Jy ! Component: 700 - total flux cleaned = 0.00171451 Jy ! Component: 750 - total flux cleaned = 0.00174488 Jy ! Component: 800 - total flux cleaned = 0.00171501 Jy ! Component: 850 - total flux cleaned = 0.0017447 Jy ! Component: 900 - total flux cleaned = 0.00174469 Jy ! Component: 950 - total flux cleaned = 0.00174461 Jy ! Component: 1000 - total flux cleaned = 0.00175876 Jy ! Component: 1050 - total flux cleaned = 0.0017728 Jy ! Component: 1100 - total flux cleaned = 0.00178642 Jy ! Component: 1150 - total flux cleaned = 0.00181369 Jy ! Component: 1200 - total flux cleaned = 0.00179997 Jy ! Component: 1250 - total flux cleaned = 0.00177302 Jy ! Component: 1300 - total flux cleaned = 0.00175978 Jy ! Component: 1350 - total flux cleaned = 0.00179952 Jy ! Component: 1400 - total flux cleaned = 0.00178648 Jy ! Component: 1450 - total flux cleaned = 0.0017607 Jy ! Component: 1500 - total flux cleaned = 0.00181204 Jy ! Component: 1550 - total flux cleaned = 0.00181215 Jy ! Component: 1600 - total flux cleaned = 0.00181195 Jy ! Component: 1650 - total flux cleaned = 0.0017996 Jy ! Component: 1700 - total flux cleaned = 0.00183661 Jy ! Component: 1750 - total flux cleaned = 0.00187314 Jy ! Component: 1800 - total flux cleaned = 0.00187313 Jy ! Component: 1850 - total flux cleaned = 0.00187315 Jy ! Component: 1900 - total flux cleaned = 0.00187328 Jy ! Component: 1950 - total flux cleaned = 0.00195586 Jy ! Component: 2000 - total flux cleaned = 0.00193237 Jy ! Component: 2050 - total flux cleaned = 0.00195558 Jy ! Component: 2100 - total flux cleaned = 0.00195554 Jy ! Component: 2150 - total flux cleaned = 0.00192149 Jy ! Component: 2200 - total flux cleaned = 0.00200031 Jy ! Component: 2250 - total flux cleaned = 0.00203368 Jy ! Component: 2300 - total flux cleaned = 0.00202245 Jy ! Component: 2350 - total flux cleaned = 0.0020445 Jy ! Component: 2400 - total flux cleaned = 0.00204444 Jy ! Component: 2450 - total flux cleaned = 0.00208754 Jy ! Component: 2500 - total flux cleaned = 0.00209833 Jy ! Component: 2550 - total flux cleaned = 0.0020769 Jy ! Component: 2600 - total flux cleaned = 0.00212994 Jy ! Component: 2650 - total flux cleaned = 0.0021193 Jy ! Component: 2700 - total flux cleaned = 0.00211923 Jy ! Component: 2750 - total flux cleaned = 0.00212965 Jy ! Component: 2800 - total flux cleaned = 0.00210911 Jy ! Component: 2850 - total flux cleaned = 0.00213967 Jy ! Component: 2900 - total flux cleaned = 0.00215993 Jy ! Component: 2950 - total flux cleaned = 0.00218997 Jy ! Component: 3000 - total flux cleaned = 0.00216999 Jy ! Component: 3050 - total flux cleaned = 0.00216009 Jy ! Component: 3100 - total flux cleaned = 0.00220922 Jy ! Component: 3150 - total flux cleaned = 0.00217987 Jy ! Component: 3200 - total flux cleaned = 0.00216048 Jy ! Component: 3250 - total flux cleaned = 0.00215086 Jy ! Component: 3300 - total flux cleaned = 0.0021797 Jy ! Component: 3350 - total flux cleaned = 0.00221778 Jy ! Component: 3400 - total flux cleaned = 0.00217996 Jy ! Component: 3450 - total flux cleaned = 0.00219877 Jy ! Component: 3500 - total flux cleaned = 0.00220813 Jy ! Component: 3550 - total flux cleaned = 0.00220814 Jy ! Component: 3600 - total flux cleaned = 0.00224506 Jy ! Component: 3650 - total flux cleaned = 0.00225417 Jy ! Component: 3700 - total flux cleaned = 0.00223594 Jy ! Component: 3750 - total flux cleaned = 0.00224498 Jy ! Component: 3800 - total flux cleaned = 0.002236 Jy ! Component: 3850 - total flux cleaned = 0.0022003 Jy ! Component: 3900 - total flux cleaned = 0.00223593 Jy ! Component: 3950 - total flux cleaned = 0.00228022 Jy ! Component: 4000 - total flux cleaned = 0.00233292 Jy ! Component: 4050 - total flux cleaned = 0.00231531 Jy ! Total flux subtracted in 4096 components = 0.00230653 Jy ! Clean residual min=-0.000452 max=0.000434 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.10219 Jy keep ! Adding 356 model components to the UV plane model. ! The established model now contains 634 components and 0.10219 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1725+7726_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.262 x 1.878 at -23.68 degrees (North through East) ! Clean map min=-0.0011585 max=0.033433 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1725+7726_X_a_map.fits wmodel /vlbi/uf001/uvm//J1725+7726_X_a_map.mod ! Writing 634 model components to file: /vlbi/uf001/uvm//J1725+7726_X_a_map.mod wobs /vlbi/uf001/uvm//J1725+7726_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1725+7726_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1725+7726_X_a_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1725+7726_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.033433 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.53088 1.53088 3.06175 6.1235 12.247 24.494 48.988 97.976 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.033 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 195.966 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1725+7726_X_a_dfm.log closed on Sun Jan 13 22:07:00 2019