! Started logfile: /vlbi/uf001/uva//J1724+4004_X_dfm.log on Mon Jan 14 04:10:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1724+4004_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1724+4004_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835867 visibilities/baseline/integration-bin. ! Found source: J1724+4004 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 25728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1724+4004_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.163467Jy sigma=23.847968 ! Fit after self-cal, rms=0.409743Jy sigma=8.376611 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7292 mas, bmaj=1.249 mas, bpa=-9.213 degrees ! Estimated noise=0.449152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.454159 Jy ! Component: 100 - total flux cleaned = 0.553884 Jy ! Total flux subtracted in 100 components = 0.553884 Jy ! Clean residual min=-0.012593 max=0.031537 Jy/beam ! Clean residual mean=0.000011 rms=0.002978 Jy/beam ! Combined flux in latest and established models = 0.553884 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.553884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094765Jy sigma=1.922743 ! Fit after self-cal, rms=0.094740Jy sigma=1.922175 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319535 Jy ! Component: 100 - total flux cleaned = 0.0480414 Jy ! Total flux subtracted in 100 components = 0.0480414 Jy ! Clean residual min=-0.010411 max=0.016978 Jy/beam ! Clean residual mean=0.000002 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.601926 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.601926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078354Jy sigma=1.571279 ! Fit after self-cal, rms=0.078319Jy sigma=1.570735 ! Inverting map ! Added new window around map position (-1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155648 Jy ! Component: 100 - total flux cleaned = 0.0247963 Jy ! Total flux subtracted in 100 components = 0.0247963 Jy ! Clean residual min=-0.009490 max=0.015358 Jy/beam ! Clean residual mean=-0.000001 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.626722 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.626722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073538Jy sigma=1.466797 ! Fit after self-cal, rms=0.073122Jy sigma=1.458631 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9504 mas, bmaj=1.585 mas, bpa=-9.236 degrees ! Estimated noise=0.226241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.8, 12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151543 Jy ! Component: 100 - total flux cleaned = 0.024967 Jy ! Component: 150 - total flux cleaned = 0.0320483 Jy ! Component: 200 - total flux cleaned = 0.0368026 Jy ! Total flux subtracted in 200 components = 0.0368026 Jy ! Clean residual min=-0.009949 max=0.010977 Jy/beam ! Clean residual mean=-0.000018 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.663525 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 47 components and 0.663525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069515Jy sigma=1.373239 ! Fit after self-cal, rms=0.069248Jy sigma=1.367210 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9504 x 1.585 at -9.236 degrees (North through East) ! Clean map min=-0.0094119 max=0.58902 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.98 KP 1.04 ! LA 1.02 MK 1.03 NL 0.97 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.97 KP 1.04 ! LA 1.02 MK 1.04 NL 0.97 OV 0.94 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 1.03 ! LA 1.02 MK 1.03 NL 0.97 OV 0.93 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.97 KP 1.04 ! LA 1.01 MK 1.04 NL 0.97 OV 0.95 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.00 KP 1.03 ! LA 1.02 MK 1.03 NL 0.95 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 1.03 ! LA 1.01 MK 1.04 NL 0.96 OV 0.96 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.02 KP 1.04 ! LA 1.01 MK 1.03 NL 0.97 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.00 KP 1.03 ! LA 1.01 MK 1.03 NL 0.97 OV 0.95 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.97 KP 1.03 ! LA 1.00 MK 1.03 NL 0.97 OV 0.95 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.98 KP 1.03 ! LA 1.02 MK 1.05 NL 0.97 OV 0.95 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.00 KP 1.04 ! LA 1.01 MK 0.99 NL 0.96 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 1.04 ! LA 1.02 MK 0.99 NL 0.96 OV 0.93 ! PT 0.93 SC 0.99 ! ! ! Fit before self-cal, rms=0.069248Jy sigma=1.367210 ! Fit after self-cal, rms=0.058034Jy sigma=1.110764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9536 mas, bmaj=1.596 mas, bpa=-9.16 degrees ! Estimated noise=0.22656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121501 Jy ! Component: 100 - total flux cleaned = 0.000764615 Jy ! Component: 150 - total flux cleaned = 0.00108403 Jy ! Component: 200 - total flux cleaned = 0.00149223 Jy ! Total flux subtracted in 200 components = 0.00149223 Jy ! Clean residual min=-0.003863 max=0.004529 Jy/beam ! Clean residual mean=-0.000003 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.665017 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 79 components and 0.665017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056597Jy sigma=1.079172 ! Fit after self-cal, rms=0.056541Jy sigma=1.077757 ! Inverting map ! Added new window around map position (-5.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264479 Jy ! Component: 100 - total flux cleaned = 0.00342245 Jy ! Component: 150 - total flux cleaned = 0.00420993 Jy ! Component: 200 - total flux cleaned = 0.00461103 Jy ! Total flux subtracted in 200 components = 0.00461103 Jy ! Clean residual min=-0.003020 max=0.003780 Jy/beam ! Clean residual mean=-0.000001 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.669628 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 92 components and 0.669628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056016Jy sigma=1.066869 ! Fit after self-cal, rms=0.055993Jy sigma=1.066432 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055993Jy sigma=1.066432 ! Fit after self-cal, rms=0.055058Jy sigma=1.045922 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9531 mas, bmaj=1.594 mas, bpa=-9.126 degrees ! Estimated noise=0.226179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.54245e-05 Jy ! Component: 100 - total flux cleaned = -9.83875e-05 Jy ! Component: 150 - total flux cleaned = 0.000245477 Jy ! Component: 200 - total flux cleaned = 0.000474647 Jy ! Total flux subtracted in 200 components = 0.000474647 Jy ! Clean residual min=-0.002072 max=0.002781 Jy/beam ! Clean residual mean=-0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.670102 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.670102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054775Jy sigma=1.039733 ! Fit after self-cal, rms=0.054766Jy sigma=1.039496 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195638 Jy ! Component: 100 - total flux cleaned = 0.00209529 Jy ! Component: 150 - total flux cleaned = 0.00209664 Jy ! Component: 200 - total flux cleaned = 0.00215533 Jy ! Total flux subtracted in 200 components = 0.00215533 Jy ! Clean residual min=-0.001922 max=0.001842 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.672258 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.672257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054591Jy sigma=1.035714 ! Fit after self-cal, rms=0.054587Jy sigma=1.035632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054587Jy sigma=1.035632 ! Fit after self-cal, rms=0.054543Jy sigma=1.034847 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9527 mas, bmaj=1.593 mas, bpa=-9.116 degrees ! Estimated noise=0.226036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634874 Jy ! Component: 100 - total flux cleaned = -0.000397952 Jy ! Component: 150 - total flux cleaned = -0.000237122 Jy ! Component: 200 - total flux cleaned = -3.91825e-05 Jy ! Total flux subtracted in 200 components = -3.91825e-05 Jy ! Clean residual min=-0.001664 max=0.001609 Jy/beam ! Clean residual mean=-0.000001 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.672218 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 128 components and 0.672218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054434Jy sigma=1.032504 ! Fit after self-cal, rms=0.054431Jy sigma=1.032437 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.28017e-05 Jy ! Component: 100 - total flux cleaned = -5.25862e-06 Jy ! Component: 150 - total flux cleaned = 3.54578e-05 Jy ! Component: 200 - total flux cleaned = 0.000113262 Jy ! Total flux subtracted in 200 components = 0.000113262 Jy ! Clean residual min=-0.001595 max=0.001539 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.672332 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 139 components and 0.672331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054373Jy sigma=1.031194 ! Fit after self-cal, rms=0.054371Jy sigma=1.031162 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054371Jy sigma=1.031162 ! Fit after self-cal, rms=0.054364Jy sigma=1.030886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.254 mas, bmaj=2.706 mas, bpa=-3.892 degrees ! Estimated noise=0.284183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104823 Jy ! Component: 100 - total flux cleaned = 0.00129252 Jy ! Component: 150 - total flux cleaned = 0.00155477 Jy ! Component: 200 - total flux cleaned = 0.00178603 Jy ! Total flux subtracted in 200 components = 0.00178603 Jy ! Clean residual min=-0.001725 max=0.002201 Jy/beam ! Clean residual mean=-0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.674118 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 154 components and 0.674118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054335Jy sigma=1.030360 ! Fit after self-cal, rms=0.054331Jy sigma=1.030244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.8, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180864 Jy ! Component: 100 - total flux cleaned = 0.00239907 Jy ! Component: 150 - total flux cleaned = 0.00284117 Jy ! Component: 200 - total flux cleaned = 0.00305637 Jy ! Total flux subtracted in 200 components = 0.00305637 Jy ! Clean residual min=-0.001527 max=0.001704 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.677174 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 181 components and 0.677174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054279Jy sigma=1.029235 ! Fit after self-cal, rms=0.054276Jy sigma=1.029149 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9525 mas, bmaj=1.593 mas, bpa=-9.115 degrees ! Estimated noise=0.225989 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9525 x 1.593 at -9.115 degrees (North through East) ! Clean map min=-0.0012352 max=0.59034 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054276Jy sigma=1.029149 ! Fit after self-cal, rms=0.050983Jy sigma=0.954014 ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=1.594 mas, bpa=-9.133 degrees ! Estimated noise=0.225963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452414 Jy ! Component: 100 - total flux cleaned = -0.000533325 Jy ! Component: 150 - total flux cleaned = -0.000418912 Jy ! Component: 200 - total flux cleaned = -0.000382876 Jy ! Total flux subtracted in 200 components = -0.000382876 Jy ! Clean residual min=-0.001258 max=0.001287 Jy/beam ! Clean residual mean=-0.000000 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.676791 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 197 components and 0.676791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050925Jy sigma=0.952824 ! Fit after self-cal, rms=0.050923Jy sigma=0.952796 ! Inverting map ! Added new window around map position (-9, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863336 Jy ! Component: 100 - total flux cleaned = 0.00089842 Jy ! Component: 150 - total flux cleaned = 0.00089747 Jy ! Component: 200 - total flux cleaned = 0.000927757 Jy ! Total flux subtracted in 200 components = 0.000927757 Jy ! Clean residual min=-0.001179 max=0.001145 Jy/beam ! Clean residual mean=0.000000 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.677719 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 215 components and 0.677719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050875Jy sigma=0.951771 ! Fit after self-cal, rms=0.050872Jy sigma=0.951720 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050872Jy sigma=0.951720 ! Fit after self-cal, rms=0.050867Jy sigma=0.951644 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.73 mas, bmaj=1.251 mas, bpa=-9.034 degrees ! Estimated noise=0.450253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.455207 Jy ! Component: 100 - total flux cleaned = 0.555354 Jy ! Component: 150 - total flux cleaned = 0.588114 Jy ! Component: 200 - total flux cleaned = 0.605029 Jy ! Total flux subtracted in 200 components = 0.605029 Jy ! Clean residual min=-0.004675 max=0.008781 Jy/beam ! Clean residual mean=0.000002 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.605029 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.605029 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=1.594 mas, bpa=-9.135 degrees ! Estimated noise=0.225941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156524 Jy ! Component: 100 - total flux cleaned = 0.0254821 Jy ! Component: 150 - total flux cleaned = 0.0326419 Jy ! Component: 200 - total flux cleaned = 0.0381773 Jy ! Total flux subtracted in 200 components = 0.0381773 Jy ! Clean residual min=-0.002133 max=0.003279 Jy/beam ! Clean residual mean=-0.000005 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.643206 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 40 components and 0.643206 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445468 Jy ! Component: 100 - total flux cleaned = 0.00811278 Jy ! Component: 150 - total flux cleaned = 0.0111784 Jy ! Component: 200 - total flux cleaned = 0.0137972 Jy ! Total flux subtracted in 200 components = 0.0137972 Jy ! Clean residual min=-0.001563 max=0.001907 Jy/beam ! Clean residual mean=-0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.657003 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 67 components and 0.657003 Jy ! Inverting map ! Added new window around map position (1, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232238 Jy ! Component: 100 - total flux cleaned = 0.00433613 Jy ! Component: 150 - total flux cleaned = 0.00612372 Jy ! Component: 200 - total flux cleaned = 0.00773535 Jy ! Total flux subtracted in 200 components = 0.00773535 Jy ! Clean residual min=-0.001383 max=0.001321 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.664738 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 95 components and 0.664738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.254 mas, bmaj=2.707 mas, bpa=-3.982 degrees ! Estimated noise=0.28403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236478 Jy ! Component: 100 - total flux cleaned = 0.00425702 Jy ! Component: 150 - total flux cleaned = 0.00584715 Jy ! Component: 200 - total flux cleaned = 0.00720555 Jy ! Total flux subtracted in 200 components = 0.00720555 Jy ! Clean residual min=-0.001463 max=0.001725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.671944 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104555 Jy ! Component: 100 - total flux cleaned = 0.00184497 Jy ! Component: 150 - total flux cleaned = 0.00241209 Jy ! Component: 200 - total flux cleaned = 0.00296319 Jy ! Total flux subtracted in 200 components = 0.00296319 Jy ! Clean residual min=-0.001271 max=0.001585 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.674907 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 184 components and 0.674907 Jy ! Inverting map ! Added new window around map position (-11, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151741 Jy ! Component: 100 - total flux cleaned = 0.00240303 Jy ! Component: 150 - total flux cleaned = 0.00288157 Jy ! Component: 200 - total flux cleaned = 0.00317936 Jy ! Total flux subtracted in 200 components = 0.00317936 Jy ! Clean residual min=-0.001186 max=0.001147 Jy/beam ! Clean residual mean=-0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.678086 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 205 components and 0.678086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=1.594 mas, bpa=-9.135 degrees ! Estimated noise=0.225941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014392 Jy ! Component: 100 - total flux cleaned = 0.000139228 Jy ! Component: 150 - total flux cleaned = 0.00017551 Jy ! Component: 200 - total flux cleaned = 0.000242457 Jy ! Total flux subtracted in 200 components = 0.000242457 Jy ! Clean residual min=-0.001147 max=0.001110 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.678329 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 227 components and 0.678329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050809Jy sigma=0.950643 ! Fit after self-cal, rms=0.050790Jy sigma=0.950251 wmodel J1724+4004_X_map.mod ! Writing 227 model components to file: J1724+4004_X_map.mod wobs J1724+4004_X_uvs.fits ! Writing UV FITS file: J1724+4004_X_uvs.fits wwins J1724+4004_X_map.win ! wwins: Wrote 10 windows to J1724+4004_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212768 Jy ! Component: 100 - total flux cleaned = -0.000174983 Jy ! Component: 150 - total flux cleaned = -0.000103374 Jy ! Component: 200 - total flux cleaned = -3.40924e-05 Jy ! Component: 250 - total flux cleaned = 6.62864e-05 Jy ! Component: 300 - total flux cleaned = 0.000147662 Jy ! Component: 350 - total flux cleaned = 0.000226676 Jy ! Component: 400 - total flux cleaned = 0.000288553 Jy ! Component: 450 - total flux cleaned = 0.000364168 Jy ! Component: 500 - total flux cleaned = 0.000394035 Jy ! Component: 550 - total flux cleaned = 0.000438047 Jy ! Component: 600 - total flux cleaned = 0.00046699 Jy ! Component: 650 - total flux cleaned = 0.000509646 Jy ! Component: 700 - total flux cleaned = 0.00053751 Jy ! Component: 750 - total flux cleaned = 0.000564937 Jy ! Component: 800 - total flux cleaned = 0.000551457 Jy ! Component: 850 - total flux cleaned = 0.000564821 Jy ! Component: 900 - total flux cleaned = 0.000538219 Jy ! Component: 950 - total flux cleaned = 0.000577396 Jy ! Component: 1000 - total flux cleaned = 0.000499721 Jy ! Component: 1050 - total flux cleaned = 0.000512526 Jy ! Component: 1100 - total flux cleaned = 0.00056275 Jy ! Component: 1150 - total flux cleaned = 0.000549917 Jy ! Component: 1200 - total flux cleaned = 0.000549708 Jy ! Component: 1250 - total flux cleaned = 0.000525449 Jy ! Component: 1300 - total flux cleaned = 0.000573929 Jy ! Component: 1350 - total flux cleaned = 0.000573948 Jy ! Component: 1400 - total flux cleaned = 0.00060929 Jy ! Component: 1450 - total flux cleaned = 0.000574044 Jy ! Component: 1500 - total flux cleaned = 0.000632094 Jy ! Component: 1550 - total flux cleaned = 0.000643648 Jy ! Component: 1600 - total flux cleaned = 0.000654957 Jy ! Component: 1650 - total flux cleaned = 0.00067776 Jy ! Component: 1700 - total flux cleaned = 0.000677908 Jy ! Component: 1750 - total flux cleaned = 0.000766651 Jy ! Component: 1800 - total flux cleaned = 0.000733542 Jy ! Component: 1850 - total flux cleaned = 0.000788146 Jy ! Component: 1900 - total flux cleaned = 0.000788142 Jy ! Component: 1950 - total flux cleaned = 0.000788266 Jy ! Component: 2000 - total flux cleaned = 0.000830836 Jy ! Component: 2050 - total flux cleaned = 0.000862559 Jy ! Component: 2100 - total flux cleaned = 0.000893936 Jy ! Component: 2150 - total flux cleaned = 0.000966663 Jy ! Component: 2200 - total flux cleaned = 0.000976942 Jy ! Component: 2250 - total flux cleaned = 0.000966799 Jy ! Component: 2300 - total flux cleaned = 0.00103828 Jy ! Component: 2350 - total flux cleaned = 0.00105845 Jy ! Component: 2400 - total flux cleaned = 0.00108862 Jy ! Component: 2450 - total flux cleaned = 0.00110853 Jy ! Component: 2500 - total flux cleaned = 0.00111855 Jy ! Component: 2550 - total flux cleaned = 0.00118759 Jy ! Component: 2600 - total flux cleaned = 0.00120713 Jy ! Component: 2650 - total flux cleaned = 0.00123626 Jy ! Component: 2700 - total flux cleaned = 0.00124591 Jy ! Component: 2750 - total flux cleaned = 0.00128439 Jy ! Component: 2800 - total flux cleaned = 0.00130349 Jy ! Component: 2850 - total flux cleaned = 0.00138886 Jy ! Component: 2900 - total flux cleaned = 0.00136999 Jy ! Component: 2950 - total flux cleaned = 0.00139805 Jy ! Component: 3000 - total flux cleaned = 0.00144462 Jy ! Component: 3050 - total flux cleaned = 0.00148167 Jy ! Component: 3100 - total flux cleaned = 0.00155536 Jy ! Component: 3150 - total flux cleaned = 0.00159206 Jy ! Component: 3200 - total flux cleaned = 0.00161931 Jy ! Component: 3250 - total flux cleaned = 0.00165545 Jy ! Component: 3300 - total flux cleaned = 0.0016914 Jy ! Component: 3350 - total flux cleaned = 0.00168246 Jy ! Component: 3400 - total flux cleaned = 0.00174477 Jy ! Component: 3450 - total flux cleaned = 0.00178014 Jy ! Component: 3500 - total flux cleaned = 0.00179784 Jy ! Component: 3550 - total flux cleaned = 0.00184161 Jy ! Component: 3600 - total flux cleaned = 0.00183285 Jy ! Component: 3650 - total flux cleaned = 0.00183291 Jy ! Component: 3700 - total flux cleaned = 0.00187607 Jy ! Component: 3750 - total flux cleaned = 0.00188473 Jy ! Component: 3800 - total flux cleaned = 0.00189334 Jy ! Component: 3850 - total flux cleaned = 0.00194428 Jy ! Component: 3900 - total flux cleaned = 0.00192748 Jy ! Component: 3950 - total flux cleaned = 0.00195269 Jy ! Component: 4000 - total flux cleaned = 0.00200281 Jy ! Component: 4050 - total flux cleaned = 0.00197789 Jy ! Total flux subtracted in 4096 components = 0.00203579 Jy ! Clean residual min=-0.000473 max=0.000521 Jy/beam ! Clean residual mean=-0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.680365 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 549 components and 0.680364 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1724+4004_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9528 x 1.594 at -9.135 degrees (North through East) ! Clean map min=-0.00085372 max=0.59254 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1724+4004_X_map.fits wmodel /vlbi/uf001/uva//J1724+4004_X_map.mod ! Writing 549 model components to file: /vlbi/uf001/uva//J1724+4004_X_map.mod wobs /vlbi/uf001/uva//J1724+4004_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1724+4004_X_uvs.fits wwins /vlbi/uf001/uva//J1724+4004_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J1724+4004_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.592542 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138533 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0701384 0.0701384 0.140277 0.280554 0.561108 1.12222 2.24443 4.48886 8.97772 17.9554 35.9109 71.8218 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.592 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4277.25 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1724+4004_X_dfm.log closed on Mon Jan 14 04:10:54 2019