! Started logfile: /vlbi/uf001/uva//J1722+2815_S_dfm.log on Mon Jan 14 04:08:59 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1722+2815_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1722+2815_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.71423 visibilities/baseline/integration-bin.
! Found source: J1722+2815
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5496 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1722+2815_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 217 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 217 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 217 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018011Jy  sigma=20.797769
! Fit after  self-cal, rms=0.753399Jy  sigma=15.186910
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=6.25 mas, bpa=-5.172 degrees
! Estimated noise=0.71305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189229 Jy
! Component: 100  -  total flux cleaned = 0.240691 Jy
! Total flux subtracted in 100 components = 0.240691 Jy
! Clean residual min=-0.010743 max=0.027526 Jy/beam
! Clean residual mean=-0.000068 rms=0.003167 Jy/beam
! Combined flux in latest and established models = 0.240691 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.240691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084761Jy  sigma=1.705039
! Fit after  self-cal, rms=0.084708Jy  sigma=1.703589
! Inverting map 
! Added new window around map position (-7.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293397 Jy
! Component: 100  -  total flux cleaned = 0.048668 Jy
! Total flux subtracted in 100 components = 0.048668 Jy
! Clean residual min=-0.008402 max=0.011217 Jy/beam
! Clean residual mean=-0.000049 rms=0.002104 Jy/beam
! Combined flux in latest and established models = 0.289359 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.289359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071936Jy  sigma=1.412705
! Fit after  self-cal, rms=0.071526Jy  sigma=1.403481
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149043 Jy
! Component: 100  -  total flux cleaned = 0.0255732 Jy
! Total flux subtracted in 100 components = 0.0255732 Jy
! Clean residual min=-0.006878 max=0.007488 Jy/beam
! Clean residual mean=-0.000038 rms=0.001677 Jy/beam
! Combined flux in latest and established models = 0.314933 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 60 components and 0.314933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067742Jy  sigma=1.311777
! Fit after  self-cal, rms=0.067641Jy  sigma=1.309332
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.572 mas, bmaj=6.851 mas, bpa=-5.094 degrees
! Estimated noise=0.522383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111803 Jy
! Component: 100  -  total flux cleaned = 0.0191774 Jy
! Component: 150  -  total flux cleaned = 0.0253973 Jy
! Component: 200  -  total flux cleaned = 0.0303386 Jy
! Total flux subtracted in 200 components = 0.0303386 Jy
! Clean residual min=-0.005859 max=0.006763 Jy/beam
! Clean residual mean=-0.000016 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.345271 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 108 components and 0.345271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065287Jy  sigma=1.252306
! Fit after  self-cal, rms=0.065223Jy  sigma=1.250608
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.572 x 6.851 at -5.094 degrees (North through East)
! Clean map  min=-0.0058021  max=0.2431 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.94     HN        0.97     KP        1.02     
!   LA        0.89     MK        1.04     NL        1.06     OV        1.04     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.93     HN        0.98     KP        1.01     
!   LA        0.89     MK        1.04     NL        1.04     OV        1.00     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.93     MK        1.05     NL        1.08     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.065223Jy  sigma=1.250608
! Fit after  self-cal, rms=0.062843Jy  sigma=1.186423
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.6 mas, bmaj=6.896 mas, bpa=-4.647 degrees
! Estimated noise=0.52015 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465569 Jy
! Component: 100  -  total flux cleaned = 0.00469015 Jy
! Component: 150  -  total flux cleaned = 0.0043533 Jy
! Component: 200  -  total flux cleaned = 0.00435337 Jy
! Total flux subtracted in 200 components = 0.00435337 Jy
! Clean residual min=-0.003040 max=0.003232 Jy/beam
! Clean residual mean=0.000010 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.349625 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 135 components and 0.349625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062464Jy  sigma=1.178349
! Fit after  self-cal, rms=0.062463Jy  sigma=1.177382
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062463Jy  sigma=1.177382
! Fit after  self-cal, rms=0.061958Jy  sigma=1.163972
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.598 mas, bmaj=6.904 mas, bpa=-4.995 degrees
! Estimated noise=0.520044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327337 Jy
! Component: 100  -  total flux cleaned = 0.000569822 Jy
! Component: 150  -  total flux cleaned = 0.000617454 Jy
! Component: 200  -  total flux cleaned = 0.00066451 Jy
! Total flux subtracted in 200 components = 0.00066451 Jy
! Clean residual min=-0.002323 max=0.002733 Jy/beam
! Clean residual mean=0.000005 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.350289 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 154 components and 0.350289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061855Jy  sigma=1.161909
! Fit after  self-cal, rms=0.061857Jy  sigma=1.161752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19, -27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119392 Jy
! Component: 100  -  total flux cleaned = 0.00131825 Jy
! Component: 150  -  total flux cleaned = 0.00121754 Jy
! Component: 200  -  total flux cleaned = 0.00117105 Jy
! Total flux subtracted in 200 components = 0.00117105 Jy
! Clean residual min=-0.002210 max=0.002340 Jy/beam
! Clean residual mean=0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.35146 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 169 components and 0.35146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061717Jy  sigma=1.159025
! Fit after  self-cal, rms=0.061714Jy  sigma=1.158947
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061714Jy  sigma=1.158947
! Fit after  self-cal, rms=0.061895Jy  sigma=1.158511
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=6.911 mas, bpa=-5.051 degrees
! Estimated noise=0.520272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.39028e-05 Jy
! Component: 100  -  total flux cleaned = 7.14911e-05 Jy
! Component: 150  -  total flux cleaned = 2.9836e-05 Jy
! Component: 200  -  total flux cleaned = -0.000125926 Jy
! Total flux subtracted in 200 components = -0.000125926 Jy
! Clean residual min=-0.002040 max=0.002288 Jy/beam
! Clean residual mean=0.000004 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.351334 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 179 components and 0.351334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061832Jy  sigma=1.157327
! Fit after  self-cal, rms=0.061835Jy  sigma=1.157287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.96132e-05 Jy
! Component: 100  -  total flux cleaned = -0.000112845 Jy
! Component: 150  -  total flux cleaned = -0.00021582 Jy
! Component: 200  -  total flux cleaned = -0.000313305 Jy
! Total flux subtracted in 200 components = -0.000313305 Jy
! Clean residual min=-0.002026 max=0.002202 Jy/beam
! Clean residual mean=0.000004 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.351021 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 195 components and 0.351021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061798Jy  sigma=1.156609
! Fit after  self-cal, rms=0.061797Jy  sigma=1.156593
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061797Jy  sigma=1.156593
! Fit after  self-cal, rms=0.061904Jy  sigma=1.156453
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.417 mas, bmaj=10.17 mas, bpa=-5.103 degrees
! Estimated noise=0.624514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000387733 Jy
! Component: 100  -  total flux cleaned = -0.000422922 Jy
! Component: 150  -  total flux cleaned = -0.000424605 Jy
! Component: 200  -  total flux cleaned = -0.000376536 Jy
! Total flux subtracted in 200 components = -0.000376536 Jy
! Clean residual min=-0.002340 max=0.002011 Jy/beam
! Clean residual mean=0.000006 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.350644 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 209 components and 0.350644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061885Jy  sigma=1.156085
! Fit after  self-cal, rms=0.061885Jy  sigma=1.156020
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.96822e-06 Jy
! Component: 100  -  total flux cleaned = 0.000138342 Jy
! Component: 150  -  total flux cleaned = 0.000203514 Jy
! Component: 200  -  total flux cleaned = 0.0002232 Jy
! Total flux subtracted in 200 components = 0.0002232 Jy
! Clean residual min=-0.002301 max=0.001989 Jy/beam
! Clean residual mean=0.000006 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.350867 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 224 components and 0.350867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061875Jy  sigma=1.155870
! Fit after  self-cal, rms=0.061874Jy  sigma=1.155837
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.605 mas, bmaj=6.915 mas, bpa=-5.057 degrees
! Estimated noise=0.520299 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.605 x 6.915 at -5.057 degrees (North through East)
! Clean map  min=-0.0027332  max=0.24107 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=6.301 mas, bpa=-5.189 degrees
! Estimated noise=0.711814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.188562 Jy
! Component: 100  -  total flux cleaned = 0.239969 Jy
! Component: 150  -  total flux cleaned = 0.268738 Jy
! Component: 200  -  total flux cleaned = 0.287671 Jy
! Total flux subtracted in 200 components = 0.287671 Jy
! Clean residual min=-0.005140 max=0.010272 Jy/beam
! Clean residual mean=-0.000025 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.287671 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.287671 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.605 mas, bmaj=6.915 mas, bpa=-5.057 degrees
! Estimated noise=0.520299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159888 Jy
! Component: 100  -  total flux cleaned = 0.0264063 Jy
! Component: 150  -  total flux cleaned = 0.0339751 Jy
! Component: 200  -  total flux cleaned = 0.0397181 Jy
! Total flux subtracted in 200 components = 0.0397181 Jy
! Clean residual min=-0.002966 max=0.003581 Jy/beam
! Clean residual mean=-0.000002 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.327389 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 104 components and 0.327389 Jy
! Inverting map 
! Added new window around map position (4, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457822 Jy
! Component: 100  -  total flux cleaned = 0.0082515 Jy
! Component: 150  -  total flux cleaned = 0.0112299 Jy
! Component: 200  -  total flux cleaned = 0.0132085 Jy
! Total flux subtracted in 200 components = 0.0132085 Jy
! Clean residual min=-0.002577 max=0.002238 Jy/beam
! Clean residual mean=0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.340598 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 152 components and 0.340598 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.417 mas, bmaj=10.17 mas, bpa=-5.103 degrees
! Estimated noise=0.624514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324217 Jy
! Component: 100  -  total flux cleaned = 0.00512219 Jy
! Component: 150  -  total flux cleaned = 0.00612597 Jy
! Component: 200  -  total flux cleaned = 0.00698255 Jy
! Total flux subtracted in 200 components = 0.00698255 Jy
! Clean residual min=-0.002487 max=0.001881 Jy/beam
! Clean residual mean=0.000004 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.34758 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796192 Jy
! Component: 100  -  total flux cleaned = 0.00148622 Jy
! Component: 150  -  total flux cleaned = 0.00201222 Jy
! Component: 200  -  total flux cleaned = 0.0023042 Jy
! Total flux subtracted in 200 components = 0.0023042 Jy
! Clean residual min=-0.002372 max=0.001853 Jy/beam
! Clean residual mean=0.000004 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.349884 Jy
! Adding 112 model components to the UV plane model.
! The established model now contains 243 components and 0.349884 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.605 mas, bmaj=6.915 mas, bpa=-5.057 degrees
! Estimated noise=0.520299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149104 Jy
! Component: 100  -  total flux cleaned = 3.7911e-05 Jy
! Component: 150  -  total flux cleaned = 0.000165709 Jy
! Component: 200  -  total flux cleaned = 0.000244492 Jy
! Total flux subtracted in 200 components = 0.000244492 Jy
! Clean residual min=-0.002141 max=0.002217 Jy/beam
! Clean residual mean=0.000003 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.350129 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 272 components and 0.350129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061875Jy  sigma=1.155596
! Fit after  self-cal, rms=0.061860Jy  sigma=1.155358
wmodel J1722+2815_S_map.mod
! Writing 272 model components to file: J1722+2815_S_map.mod
wobs   J1722+2815_S_uvs.fits
! Writing UV FITS file: J1722+2815_S_uvs.fits
wwins  J1722+2815_S_map.win
! wwins: Wrote 6 windows to J1722+2815_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108596 Jy
! Component: 100  -  total flux cleaned = 3.25743e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100531 Jy
! Component: 200  -  total flux cleaned = 0.000265307 Jy
! Component: 250  -  total flux cleaned = 0.000425848 Jy
! Component: 300  -  total flux cleaned = 0.000551677 Jy
! Component: 350  -  total flux cleaned = 0.000766408 Jy
! Component: 400  -  total flux cleaned = 0.000856583 Jy
! Component: 450  -  total flux cleaned = 0.00100347 Jy
! Component: 500  -  total flux cleaned = 0.00106144 Jy
! Component: 550  -  total flux cleaned = 0.00117437 Jy
! Component: 600  -  total flux cleaned = 0.00106288 Jy
! Component: 650  -  total flux cleaned = 0.00111777 Jy
! Component: 700  -  total flux cleaned = 0.00117127 Jy
! Component: 750  -  total flux cleaned = 0.00114428 Jy
! Component: 800  -  total flux cleaned = 0.00106572 Jy
! Component: 850  -  total flux cleaned = 0.00109259 Jy
! Component: 900  -  total flux cleaned = 0.00106731 Jy
! Component: 950  -  total flux cleaned = 0.00111856 Jy
! Component: 1000  -  total flux cleaned = 0.00116856 Jy
! Component: 1050  -  total flux cleaned = 0.00111935 Jy
! Component: 1100  -  total flux cleaned = 0.00111949 Jy
! Component: 1150  -  total flux cleaned = 0.0011195 Jy
! Component: 1200  -  total flux cleaned = 0.0011192 Jy
! Component: 1250  -  total flux cleaned = 0.00107221 Jy
! Component: 1300  -  total flux cleaned = 0.00109591 Jy
! Component: 1350  -  total flux cleaned = 0.00109637 Jy
! Component: 1400  -  total flux cleaned = 0.00121051 Jy
! Component: 1450  -  total flux cleaned = 0.00125545 Jy
! Component: 1500  -  total flux cleaned = 0.00116564 Jy
! Component: 1550  -  total flux cleaned = 0.00123238 Jy
! Component: 1600  -  total flux cleaned = 0.00114443 Jy
! Component: 1650  -  total flux cleaned = 0.00120979 Jy
! Component: 1700  -  total flux cleaned = 0.00118798 Jy
! Component: 1750  -  total flux cleaned = 0.00123059 Jy
! Component: 1800  -  total flux cleaned = 0.00127282 Jy
! Component: 1850  -  total flux cleaned = 0.00133576 Jy
! Component: 1900  -  total flux cleaned = 0.0013981 Jy
! Component: 1950  -  total flux cleaned = 0.0013774 Jy
! Component: 2000  -  total flux cleaned = 0.00147986 Jy
! Component: 2050  -  total flux cleaned = 0.00150018 Jy
! Component: 2100  -  total flux cleaned = 0.00158059 Jy
! Component: 2150  -  total flux cleaned = 0.00164069 Jy
! Component: 2200  -  total flux cleaned = 0.00166021 Jy
! Component: 2250  -  total flux cleaned = 0.00167971 Jy
! Component: 2300  -  total flux cleaned = 0.0016798 Jy
! Component: 2350  -  total flux cleaned = 0.00167953 Jy
! Component: 2400  -  total flux cleaned = 0.00171816 Jy
! Component: 2450  -  total flux cleaned = 0.00175634 Jy
! Component: 2500  -  total flux cleaned = 0.00171857 Jy
! Component: 2550  -  total flux cleaned = 0.00173721 Jy
! Component: 2600  -  total flux cleaned = 0.00173705 Jy
! Component: 2650  -  total flux cleaned = 0.00184771 Jy
! Component: 2700  -  total flux cleaned = 0.00181096 Jy
! Component: 2750  -  total flux cleaned = 0.00182931 Jy
! Component: 2800  -  total flux cleaned = 0.00179306 Jy
! Component: 2850  -  total flux cleaned = 0.00188266 Jy
! Component: 2900  -  total flux cleaned = 0.00188277 Jy
! Component: 2950  -  total flux cleaned = 0.00188269 Jy
! Component: 3000  -  total flux cleaned = 0.00191782 Jy
! Component: 3050  -  total flux cleaned = 0.00193541 Jy
! Component: 3100  -  total flux cleaned = 0.00203917 Jy
! Component: 3150  -  total flux cleaned = 0.00202185 Jy
! Component: 3200  -  total flux cleaned = 0.00203906 Jy
! Component: 3250  -  total flux cleaned = 0.00210657 Jy
! Component: 3300  -  total flux cleaned = 0.00205626 Jy
! Component: 3350  -  total flux cleaned = 0.00210623 Jy
! Component: 3400  -  total flux cleaned = 0.00212265 Jy
! Component: 3450  -  total flux cleaned = 0.00223783 Jy
! Component: 3500  -  total flux cleaned = 0.00218867 Jy
! Component: 3550  -  total flux cleaned = 0.00217259 Jy
! Component: 3600  -  total flux cleaned = 0.00218882 Jy
! Component: 3650  -  total flux cleaned = 0.00217285 Jy
! Component: 3700  -  total flux cleaned = 0.0022049 Jy
! Component: 3750  -  total flux cleaned = 0.00218897 Jy
! Component: 3800  -  total flux cleaned = 0.00218902 Jy
! Component: 3850  -  total flux cleaned = 0.00223596 Jy
! Component: 3900  -  total flux cleaned = 0.00215825 Jy
! Component: 3950  -  total flux cleaned = 0.00220464 Jy
! Component: 4000  -  total flux cleaned = 0.00223537 Jy
! Component: 4050  -  total flux cleaned = 0.0022659 Jy
! Total flux subtracted in 4096 components = 0.00226588 Jy
! Clean residual min=-0.000862 max=0.001057 Jy/beam
! Clean residual mean=-0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.352395 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 572 components and 0.352395 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1722+2815_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.605 x 6.915 at -5.057 degrees (North through East)
! Clean map  min=-0.0022838  max=0.24179 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1722+2815_S_map.fits
wmodel /vlbi/uf001/uva//J1722+2815_S_map.mod
! Writing 572 model components to file: /vlbi/uf001/uva//J1722+2815_S_map.mod
wobs   /vlbi/uf001/uva//J1722+2815_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1722+2815_S_uvs.fits
wwins  /vlbi/uf001/uva//J1722+2815_S_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J1722+2815_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.241788 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000281574 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.349365 0.349365 0.69873 1.39746 2.79492 5.58984 11.1797 22.3594 44.7187 89.4374
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.241 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  858.7 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1722+2815_S_dfm.log closed on Mon Jan 14 04:09:03 2019