! Started logfile: /vlbi/uf001/uva//J1717-3342_S_dfm.log on Mon Jan 14 04:05:57 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1717-3342_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1717-3342_S_uva.fits
! AN table 1: 88 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.695455 visibilities/baseline/integration-bin.
! Found source: J1717-3342
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1836 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1717-3342_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026745Jy  sigma=13.942003
! Fit after  self-cal, rms=0.870648Jy  sigma=11.887209
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.76 mas, bmaj=52.56 mas, bpa=1.444 degrees
! Estimated noise=1.76848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109459 Jy
! Component: 100  -  total flux cleaned = 0.170315 Jy
! Total flux subtracted in 100 components = 0.170315 Jy
! Clean residual min=-0.031905 max=0.034331 Jy/beam
! Clean residual mean=-0.003640 rms=0.021020 Jy/beam
! Combined flux in latest and established models = 0.170315 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 68 components and 0.170315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136577Jy  sigma=1.880390
! Fit after  self-cal, rms=0.133989Jy  sigma=1.857302
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=17.54 mas, bmaj=58.93 mas, bpa=-2.08 degrees
! Estimated noise=1.28634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0545567 Jy
! Component: 100  -  total flux cleaned = 0.0754964 Jy
! Component: 150  -  total flux cleaned = 0.0989945 Jy
! Component: 200  -  total flux cleaned = 0.117763 Jy
! Total flux subtracted in 200 components = 0.117763 Jy
! Clean residual min=-0.017958 max=0.017915 Jy/beam
! Clean residual mean=-0.002114 rms=0.011160 Jy/beam
! Combined flux in latest and established models = 0.288077 Jy
! Performing phase self-cal
! Adding 127 model components to the UV plane model.
! The established model now contains 194 components and 0.288078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101381Jy  sigma=1.234703
! Fit after  self-cal, rms=0.100224Jy  sigma=1.224681
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 17.54 x 58.93 at -2.08 degrees (North through East)
! Clean map  min=-0.02279  max=0.10388 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 132 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     KP        1.39     LA        0.93     OV        0.98     
!   PT        0.89     
! 
! 
! Correcting IF 2.
!  A total of 132 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     KP        1.18     LA        0.91     OV        1.10     
!   PT        0.93     
! 
! 
! Correcting IF 3.
!  A total of 132 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     KP        1.26     LA        0.98     OV        1.00     
!   PT        0.88     
! 
! 
! Fit before self-cal, rms=0.100224Jy  sigma=1.224681
! Fit after  self-cal, rms=0.113808Jy  sigma=1.072542
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.36 mas, bmaj=54.16 mas, bpa=-1.119 degrees
! Estimated noise=1.60589 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00690454 Jy
! Component: 100  -  total flux cleaned = 0.00766377 Jy
! Component: 150  -  total flux cleaned = 0.00685872 Jy
! Component: 200  -  total flux cleaned = 0.00654648 Jy
! Total flux subtracted in 200 components = 0.00654648 Jy
! Clean residual min=-0.002663 max=0.002711 Jy/beam
! Clean residual mean=-0.000011 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.294624 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 269 components and 0.294624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112211Jy  sigma=1.060416
! Fit after  self-cal, rms=0.112162Jy  sigma=1.058411
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112162Jy  sigma=1.058411
! Fit after  self-cal, rms=0.110838Jy  sigma=1.057792
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.35 mas, bmaj=54.26 mas, bpa=-1.263 degrees
! Estimated noise=1.57946 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249992 Jy
! Component: 100  -  total flux cleaned = 0.0031428 Jy
! Component: 150  -  total flux cleaned = 0.00304844 Jy
! Component: 200  -  total flux cleaned = 0.00276386 Jy
! Total flux subtracted in 200 components = 0.00276386 Jy
! Clean residual min=-0.001479 max=0.001468 Jy/beam
! Clean residual mean=-0.000004 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.297388 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 335 components and 0.297388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110468Jy  sigma=1.055258
! Fit after  self-cal, rms=0.110283Jy  sigma=1.054210
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000540759 Jy
! Component: 100  -  total flux cleaned = 0.00146932 Jy
! Component: 150  -  total flux cleaned = 0.00162881 Jy
! Component: 200  -  total flux cleaned = 0.00150153 Jy
! Total flux subtracted in 200 components = 0.00150153 Jy
! Clean residual min=-0.001056 max=0.001064 Jy/beam
! Clean residual mean=-0.000003 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.298889 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 389 components and 0.298889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110098Jy  sigma=1.052949
! Fit after  self-cal, rms=0.109964Jy  sigma=1.052488
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109964Jy  sigma=1.052488
! Fit after  self-cal, rms=0.109166Jy  sigma=1.052183
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.39 mas, bmaj=54.04 mas, bpa=-1.256 degrees
! Estimated noise=1.57292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108981 Jy
! Component: 100  -  total flux cleaned = 0.00156263 Jy
! Component: 150  -  total flux cleaned = 0.00171055 Jy
! Component: 200  -  total flux cleaned = 0.00175517 Jy
! Total flux subtracted in 200 components = 0.00175517 Jy
! Clean residual min=-0.000671 max=0.000677 Jy/beam
! Clean residual mean=-0.000004 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.300645 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 466 components and 0.300645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109100Jy  sigma=1.051459
! Fit after  self-cal, rms=0.109092Jy  sigma=1.051197
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.96106e-05 Jy
! Component: 100  -  total flux cleaned = -5.08934e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132509 Jy
! Component: 200  -  total flux cleaned = -0.000169983 Jy
! Total flux subtracted in 200 components = -0.000169983 Jy
! Clean residual min=-0.000580 max=0.000587 Jy/beam
! Clean residual mean=-0.000003 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.300475 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 541 components and 0.300475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109058Jy  sigma=1.050724
! Fit after  self-cal, rms=0.109045Jy  sigma=1.050652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109045Jy  sigma=1.050652
! Fit after  self-cal, rms=0.109171Jy  sigma=1.050566
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.78 mas, bmaj=53.52 mas, bpa=-1.187 degrees
! Estimated noise=1.57968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271064 Jy
! Component: 100  -  total flux cleaned = 0.000235951 Jy
! Component: 150  -  total flux cleaned = 9.77355e-05 Jy
! Component: 200  -  total flux cleaned = -6.44227e-05 Jy
! Total flux subtracted in 200 components = -6.44227e-05 Jy
! Clean residual min=-0.000562 max=0.000556 Jy/beam
! Clean residual mean=-0.000006 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.30041 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 612 components and 0.30041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109146Jy  sigma=1.050274
! Fit after  self-cal, rms=0.109166Jy  sigma=1.050211
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236672 Jy
! Component: 100  -  total flux cleaned = -0.000305702 Jy
! Component: 150  -  total flux cleaned = -0.000246215 Jy
! Component: 200  -  total flux cleaned = -0.000338194 Jy
! Total flux subtracted in 200 components = -0.000338194 Jy
! Clean residual min=-0.000522 max=0.000521 Jy/beam
! Clean residual mean=-0.000004 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.300072 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 679 components and 0.300072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109146Jy  sigma=1.049975
! Fit after  self-cal, rms=0.109151Jy  sigma=1.049954
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.4 mas, bmaj=53.92 mas, bpa=-1.204 degrees
! Estimated noise=1.57252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.4 x 53.92 at -1.204 degrees (North through East)
! Clean map  min=-0.0075233  max=0.0892 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.48 mas, bmaj=51.27 mas, bpa=1.237 degrees
! Estimated noise=2.09474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851793 Jy
! Component: 100  -  total flux cleaned = 0.124543 Jy
! Component: 150  -  total flux cleaned = 0.141699 Jy
! Component: 200  -  total flux cleaned = 0.141697 Jy
! Total flux subtracted in 200 components = 0.141697 Jy
! Clean residual min=-0.025742 max=0.025943 Jy/beam
! Clean residual mean=-0.000465 rms=0.010976 Jy/beam
! Combined flux in latest and established models = 0.141697 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.141697 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.4 mas, bmaj=53.92 mas, bpa=-1.204 degrees
! Estimated noise=1.57252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00647145 Jy
! Component: 100  -  total flux cleaned = -0.00747324 Jy
! Component: 150  -  total flux cleaned = -0.00656787 Jy
! Component: 200  -  total flux cleaned = -0.00657729 Jy
! Total flux subtracted in 200 components = -0.00657729 Jy
! Clean residual min=-0.013801 max=0.013830 Jy/beam
! Clean residual mean=-0.000106 rms=0.005647 Jy/beam
! Combined flux in latest and established models = 0.135119 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 150 components and 0.135119 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.78 mas, bmaj=53.52 mas, bpa=-1.187 degrees
! Estimated noise=1.57968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00543947 Jy
! Component: 100  -  total flux cleaned = -0.00736214 Jy
! Component: 150  -  total flux cleaned = -0.00639556 Jy
! Component: 200  -  total flux cleaned = -0.00608639 Jy
! Total flux subtracted in 200 components = -0.00608639 Jy
! Clean residual min=-0.004348 max=0.004370 Jy/beam
! Clean residual mean=0.000038 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.129033 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256472 Jy
! Component: 100  -  total flux cleaned = -0.000250039 Jy
! Component: 150  -  total flux cleaned = 6.71966e-05 Jy
! Component: 200  -  total flux cleaned = 0.000450978 Jy
! Total flux subtracted in 200 components = 0.000450978 Jy
! Clean residual min=-0.006865 max=0.006901 Jy/beam
! Clean residual mean=0.000106 rms=0.002243 Jy/beam
! Combined flux in latest and established models = 0.129484 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 260 components and 0.129484 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.4 mas, bmaj=53.92 mas, bpa=-1.204 degrees
! Estimated noise=1.57252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145258 Jy
! Component: 100  -  total flux cleaned = 0.0014461 Jy
! Component: 150  -  total flux cleaned = 0.00113506 Jy
! Component: 200  -  total flux cleaned = 0.00114978 Jy
! Total flux subtracted in 200 components = 0.00114978 Jy
! Clean residual min=-0.006391 max=0.006281 Jy/beam
! Clean residual mean=-0.000114 rms=0.002214 Jy/beam
! Combined flux in latest and established models = 0.130634 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 281 components and 0.130634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109897Jy  sigma=1.064658
! Fit after  self-cal, rms=0.110145Jy  sigma=1.058230
wmodel J1717-3342_S_map.mod
! Writing 281 model components to file: J1717-3342_S_map.mod
wobs   J1717-3342_S_uvs.fits
! Writing UV FITS file: J1717-3342_S_uvs.fits
wwins  J1717-3342_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J1717-3342_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.4 x 53.92 at -1.204 degrees (North through East)
! Clean map  min=-0.022718  max=0.065704 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1717-3342_S_map.fits
wmodel /vlbi/uf001/uva//J1717-3342_S_map.mod
! Writing 281 model components to file: /vlbi/uf001/uva//J1717-3342_S_map.mod
wobs   /vlbi/uf001/uva//J1717-3342_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1717-3342_S_uvs.fits
wwins  /vlbi/uf001/uva//J1717-3342_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0657038 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00182074 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -8.3134 8.3134 16.6268 33.2536 66.5072
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0054 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  36.086 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1717-3342_S_dfm.log closed on Mon Jan 14 04:06:00 2019