! Started logfile: /vlbi/uf001/uvm//J1714-2100_S_a_dfm.log on Sun Jan 13 22:05:36 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1714-2100_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1714-2100_S_a_uvm.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! AN table 2: 72 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.868908 visibilities/baseline/integration-bin.
! Found source: J1714-2100
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10698 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1714-2100_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.013305Jy  sigma=16.876373
! Fit after  self-cal, rms=0.898247Jy  sigma=14.869287
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=8.441 mas, bpa=5.359 degrees
! Estimated noise=0.593761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0734284 Jy
! Component: 100  -  total flux cleaned = 0.107944 Jy
! Total flux subtracted in 100 components = 0.107944 Jy
! Clean residual min=-0.006415 max=0.017802 Jy/beam
! Clean residual mean=-0.000064 rms=0.002312 Jy/beam
! Combined flux in latest and established models = 0.107944 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.107944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098338Jy  sigma=1.440017
! Fit after  self-cal, rms=0.097505Jy  sigma=1.428416
! Inverting map 
! Added new window around map position (-3, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218051 Jy
! Component: 100  -  total flux cleaned = 0.0354306 Jy
! Total flux subtracted in 100 components = 0.0354306 Jy
! Clean residual min=-0.004830 max=0.010319 Jy/beam
! Clean residual mean=-0.000037 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.143375 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 56 components and 0.143375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090814Jy  sigma=1.280118
! Fit after  self-cal, rms=0.090606Jy  sigma=1.277681
! Inverting map 
! Added new window around map position (4.5, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109037 Jy
! Component: 100  -  total flux cleaned = 0.0183605 Jy
! Total flux subtracted in 100 components = 0.0183605 Jy
! Clean residual min=-0.003882 max=0.004409 Jy/beam
! Clean residual mean=-0.000024 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.161735 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 88 components and 0.161735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088845Jy  sigma=1.237137
! Fit after  self-cal, rms=0.088831Jy  sigma=1.236472
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.887 mas, bmaj=10.58 mas, bpa=3.746 degrees
! Estimated noise=0.429318 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0086817 Jy
! Component: 100  -  total flux cleaned = 0.014608 Jy
! Component: 150  -  total flux cleaned = 0.0189383 Jy
! Component: 200  -  total flux cleaned = 0.0221304 Jy
! Total flux subtracted in 200 components = 0.0221304 Jy
! Clean residual min=-0.003402 max=0.004447 Jy/beam
! Clean residual mean=-0.000014 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.183866 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 149 components and 0.183866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087914Jy  sigma=1.213744
! Fit after  self-cal, rms=0.087908Jy  sigma=1.213329
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.887 x 10.58 at 3.746 degrees (North through East)
! Clean map  min=-0.0032633  max=0.094631 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.98     KP        1.01     
!   LA        0.97     NL        1.11     OV        0.99     PT        0.98     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.87     HN        1.11     KP        0.93     
!   LA        0.92     MK        1.03     NL        1.05     OV        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.04     KP        1.08     
!   LA        0.95     NL        1.06     OV        0.95     PT        1.02     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     FD        0.95     HN        1.11     KP        1.02     
!   LA        0.96     MK        0.93     NL        0.97     OV        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.11     KP        1.07     
!   LA        0.94     NL        1.02     OV        1.00     PT        0.99     
!   SC        0.87     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.19     FD        0.96     HN        1.09     KP        0.91     
!   LA        0.93     MK        1.12     NL        1.12     OV        1.00     
! 
! 
! Fit before self-cal, rms=0.087908Jy  sigma=1.213329
! Fit after  self-cal, rms=0.093036Jy  sigma=1.199480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.896 mas, bmaj=10.52 mas, bpa=4.576 degrees
! Estimated noise=0.427634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000568265 Jy
! Component: 100  -  total flux cleaned = -0.000604328 Jy
! Component: 150  -  total flux cleaned = -0.00052783 Jy
! Component: 200  -  total flux cleaned = -0.000459122 Jy
! Total flux subtracted in 200 components = -0.000459122 Jy
! Clean residual min=-0.003159 max=0.003519 Jy/beam
! Clean residual mean=0.000002 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.183407 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 154 components and 0.183407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092992Jy  sigma=1.199361
! Fit after  self-cal, rms=0.093122Jy  sigma=1.199070
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093122Jy  sigma=1.199070
! Fit after  self-cal, rms=0.113186Jy  sigma=1.185804
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.888 mas, bmaj=10.56 mas, bpa=4.459 degrees
! Estimated noise=0.426544 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351083 Jy
! Component: 100  -  total flux cleaned = -0.000538448 Jy
! Component: 150  -  total flux cleaned = -0.00066108 Jy
! Component: 200  -  total flux cleaned = -0.000806824 Jy
! Total flux subtracted in 200 components = -0.000806824 Jy
! Clean residual min=-0.001896 max=0.002073 Jy/beam
! Clean residual mean=-0.000002 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.1826 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 167 components and 0.1826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113113Jy  sigma=1.185232
! Fit after  self-cal, rms=0.113294Jy  sigma=1.184898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0002278 Jy
! Component: 100  -  total flux cleaned = -0.000313378 Jy
! Component: 150  -  total flux cleaned = -0.000391531 Jy
! Component: 200  -  total flux cleaned = -0.000460071 Jy
! Total flux subtracted in 200 components = -0.000460071 Jy
! Clean residual min=-0.001812 max=0.001977 Jy/beam
! Clean residual mean=-0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.18214 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 167 components and 0.18214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113265Jy  sigma=1.184713
! Fit after  self-cal, rms=0.113258Jy  sigma=1.184702
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113258Jy  sigma=1.184702
! Fit after  self-cal, rms=0.116424Jy  sigma=1.184344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.883 mas, bmaj=10.54 mas, bpa=4.401 degrees
! Estimated noise=0.426089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334172 Jy
! Component: 100  -  total flux cleaned = -0.000454476 Jy
! Component: 150  -  total flux cleaned = -0.000562406 Jy
! Component: 200  -  total flux cleaned = -0.000634973 Jy
! Total flux subtracted in 200 components = -0.000634973 Jy
! Clean residual min=-0.001846 max=0.001985 Jy/beam
! Clean residual mean=-0.000002 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.181505 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 169 components and 0.181505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116390Jy  sigma=1.184148
! Fit after  self-cal, rms=0.116402Jy  sigma=1.184132
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.5668e-05 Jy
! Component: 100  -  total flux cleaned = -0.000107947 Jy
! Component: 150  -  total flux cleaned = -0.000145996 Jy
! Component: 200  -  total flux cleaned = -0.000180584 Jy
! Total flux subtracted in 200 components = -0.000180584 Jy
! Clean residual min=-0.001855 max=0.002001 Jy/beam
! Clean residual mean=-0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.181324 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 170 components and 0.181324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116384Jy  sigma=1.184054
! Fit after  self-cal, rms=0.116378Jy  sigma=1.184046
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116378Jy  sigma=1.184046
! Fit after  self-cal, rms=0.117418Jy  sigma=1.183972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=18.63 mas, bpa=2.49 degrees
! Estimated noise=0.496849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174437 Jy
! Component: 100  -  total flux cleaned = -0.000295531 Jy
! Component: 150  -  total flux cleaned = -0.000347873 Jy
! Component: 200  -  total flux cleaned = -0.000363172 Jy
! Total flux subtracted in 200 components = -0.000363172 Jy
! Clean residual min=-0.001605 max=0.001685 Jy/beam
! Clean residual mean=-0.000004 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.180961 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 179 components and 0.180961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117400Jy  sigma=1.184013
! Fit after  self-cal, rms=0.117410Jy  sigma=1.183988
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.35758e-06 Jy
! Component: 100  -  total flux cleaned = 6.7949e-06 Jy
! Component: 150  -  total flux cleaned = 2.00326e-05 Jy
! Component: 200  -  total flux cleaned = 3.23052e-05 Jy
! Total flux subtracted in 200 components = 3.23052e-05 Jy
! Clean residual min=-0.001579 max=0.001648 Jy/beam
! Clean residual mean=-0.000004 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.180993 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 180 components and 0.180993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117398Jy  sigma=1.184067
! Fit after  self-cal, rms=0.117404Jy  sigma=1.184055
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.883 mas, bmaj=10.53 mas, bpa=4.347 degrees
! Estimated noise=0.425989 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.883 x 10.53 at 4.347 degrees (North through East)
! Clean map  min=-0.0018428  max=0.093452 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.082 mas, bmaj=8.41 mas, bpa=6.307 degrees
! Estimated noise=0.589214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731644 Jy
! Component: 100  -  total flux cleaned = 0.10919 Jy
! Component: 150  -  total flux cleaned = 0.130727 Jy
! Component: 200  -  total flux cleaned = 0.144401 Jy
! Total flux subtracted in 200 components = 0.144401 Jy
! Clean residual min=-0.004217 max=0.007278 Jy/beam
! Clean residual mean=-0.000028 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.144401 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.144401 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.883 mas, bmaj=10.53 mas, bpa=4.347 degrees
! Estimated noise=0.425989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128223 Jy
! Component: 100  -  total flux cleaned = 0.0202344 Jy
! Component: 150  -  total flux cleaned = 0.0249055 Jy
! Component: 200  -  total flux cleaned = 0.0280708 Jy
! Total flux subtracted in 200 components = 0.0280708 Jy
! Clean residual min=-0.002200 max=0.002246 Jy/beam
! Clean residual mean=-0.000009 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.172472 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 134 components and 0.172472 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=18.63 mas, bpa=2.49 degrees
! Estimated noise=0.496849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00329163 Jy
! Component: 100  -  total flux cleaned = 0.00525106 Jy
! Component: 150  -  total flux cleaned = 0.0064587 Jy
! Component: 200  -  total flux cleaned = 0.00722256 Jy
! Total flux subtracted in 200 components = 0.00722256 Jy
! Clean residual min=-0.001598 max=0.001640 Jy/beam
! Clean residual mean=-0.000006 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.179694 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024305 Jy
! Component: 100  -  total flux cleaned = 0.000380512 Jy
! Component: 150  -  total flux cleaned = 0.000489819 Jy
! Component: 200  -  total flux cleaned = 0.000591901 Jy
! Total flux subtracted in 200 components = 0.000591901 Jy
! Clean residual min=-0.001601 max=0.001573 Jy/beam
! Clean residual mean=-0.000005 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.180286 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 165 components and 0.180286 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.883 mas, bmaj=10.53 mas, bpa=4.347 degrees
! Estimated noise=0.425989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165489 Jy
! Component: 100  -  total flux cleaned = 8.5911e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107364 Jy
! Component: 200  -  total flux cleaned = 0.000144922 Jy
! Total flux subtracted in 200 components = 0.000144922 Jy
! Clean residual min=-0.002007 max=0.001984 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.180431 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 178 components and 0.180431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117400Jy  sigma=1.184542
! Fit after  self-cal, rms=0.117386Jy  sigma=1.184382
wmodel J1714-2100_S_a_map.mod
! Writing 178 model components to file: J1714-2100_S_a_map.mod
wobs   J1714-2100_S_a_uvs.fits
! Writing UV FITS file: J1714-2100_S_a_uvs.fits
wwins  J1714-2100_S_a_map.win
! wwins: Wrote 3 windows to J1714-2100_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262252 Jy
! Component: 100  -  total flux cleaned = 0.000591937 Jy
! Component: 150  -  total flux cleaned = 0.000779098 Jy
! Component: 200  -  total flux cleaned = 0.000899703 Jy
! Component: 250  -  total flux cleaned = 0.000870269 Jy
! Component: 300  -  total flux cleaned = 0.00087005 Jy
! Component: 350  -  total flux cleaned = 0.000897139 Jy
! Component: 400  -  total flux cleaned = 0.000896384 Jy
! Component: 450  -  total flux cleaned = 0.000843515 Jy
! Component: 500  -  total flux cleaned = 0.000817938 Jy
! Component: 550  -  total flux cleaned = 0.000843379 Jy
! Component: 600  -  total flux cleaned = 0.000842905 Jy
! Component: 650  -  total flux cleaned = 0.000769631 Jy
! Component: 700  -  total flux cleaned = 0.000721716 Jy
! Component: 750  -  total flux cleaned = 0.000721829 Jy
! Component: 800  -  total flux cleaned = 0.000675355 Jy
! Component: 850  -  total flux cleaned = 0.000652518 Jy
! Component: 900  -  total flux cleaned = 0.000607966 Jy
! Component: 950  -  total flux cleaned = 0.000585886 Jy
! Component: 1000  -  total flux cleaned = 0.000499197 Jy
! Component: 1050  -  total flux cleaned = 0.000520632 Jy
! Component: 1100  -  total flux cleaned = 0.000478644 Jy
! Component: 1150  -  total flux cleaned = 0.000478444 Jy
! Component: 1200  -  total flux cleaned = 0.000478385 Jy
! Component: 1250  -  total flux cleaned = 0.000498482 Jy
! Component: 1300  -  total flux cleaned = 0.000458239 Jy
! Component: 1350  -  total flux cleaned = 0.000478071 Jy
! Component: 1400  -  total flux cleaned = 0.000458258 Jy
! Component: 1450  -  total flux cleaned = 0.00041929 Jy
! Component: 1500  -  total flux cleaned = 0.000400149 Jy
! Component: 1550  -  total flux cleaned = 0.000362246 Jy
! Component: 1600  -  total flux cleaned = 0.000362236 Jy
! Component: 1650  -  total flux cleaned = 0.000343915 Jy
! Component: 1700  -  total flux cleaned = 0.00027027 Jy
! Component: 1750  -  total flux cleaned = 0.000252186 Jy
! Component: 1800  -  total flux cleaned = 0.000216295 Jy
! Component: 1850  -  total flux cleaned = 0.000162992 Jy
! Component: 1900  -  total flux cleaned = 0.000162781 Jy
! Component: 1950  -  total flux cleaned = 0.000110252 Jy
! Component: 2000  -  total flux cleaned = 9.2848e-05 Jy
! Component: 2050  -  total flux cleaned = 7.58555e-05 Jy
! Component: 2100  -  total flux cleaned = 9.28579e-05 Jy
! Component: 2150  -  total flux cleaned = 5.92226e-05 Jy
! Component: 2200  -  total flux cleaned = 5.93604e-05 Jy
! Component: 2250  -  total flux cleaned = 4.32186e-05 Jy
! Component: 2300  -  total flux cleaned = 7.58677e-05 Jy
! Component: 2350  -  total flux cleaned = 9.19476e-05 Jy
! Component: 2400  -  total flux cleaned = 7.59793e-05 Jy
! Component: 2450  -  total flux cleaned = 9.20453e-05 Jy
! Component: 2500  -  total flux cleaned = 2.8936e-05 Jy
! Component: 2550  -  total flux cleaned = 9.1588e-05 Jy
! Component: 2600  -  total flux cleaned = 9.12845e-05 Jy
! Component: 2650  -  total flux cleaned = 0.000137258 Jy
! Component: 2700  -  total flux cleaned = 0.000137006 Jy
! Component: 2750  -  total flux cleaned = 0.000167378 Jy
! Component: 2800  -  total flux cleaned = 0.000167295 Jy
! Component: 2850  -  total flux cleaned = 0.000212108 Jy
! Component: 2900  -  total flux cleaned = 0.000152897 Jy
! Component: 2950  -  total flux cleaned = 0.000197291 Jy
! Component: 3000  -  total flux cleaned = 0.000285014 Jy
! Component: 3050  -  total flux cleaned = 0.000270479 Jy
! Component: 3100  -  total flux cleaned = 0.000270688 Jy
! Component: 3150  -  total flux cleaned = 0.000356866 Jy
! Component: 3200  -  total flux cleaned = 0.000413737 Jy
! Component: 3250  -  total flux cleaned = 0.00042782 Jy
! Component: 3300  -  total flux cleaned = 0.000484047 Jy
! Component: 3350  -  total flux cleaned = 0.000525999 Jy
! Component: 3400  -  total flux cleaned = 0.000581456 Jy
! Component: 3450  -  total flux cleaned = 0.000609027 Jy
! Component: 3500  -  total flux cleaned = 0.000677283 Jy
! Component: 3550  -  total flux cleaned = 0.000690841 Jy
! Component: 3600  -  total flux cleaned = 0.000717872 Jy
! Component: 3650  -  total flux cleaned = 0.000771693 Jy
! Component: 3700  -  total flux cleaned = 0.000838479 Jy
! Component: 3750  -  total flux cleaned = 0.000878373 Jy
! Component: 3800  -  total flux cleaned = 0.000917977 Jy
! Component: 3850  -  total flux cleaned = 0.000944147 Jy
! Component: 3900  -  total flux cleaned = 0.000930998 Jy
! Component: 3950  -  total flux cleaned = 0.00103495 Jy
! Component: 4000  -  total flux cleaned = 0.00104784 Jy
! Component: 4050  -  total flux cleaned = 0.00106065 Jy
! Total flux subtracted in 4096 components = 0.00108627 Jy
! Clean residual min=-0.000694 max=0.000967 Jy/beam
! Clean residual mean=0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.181517 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 460 components and 0.181517 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1714-2100_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.883 x 10.53 at 4.347 degrees (North through East)
! Clean map  min=-0.0015467  max=0.09364 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1714-2100_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1714-2100_S_a_map.mod
! Writing 460 model components to file: /vlbi/uf001/uvm//J1714-2100_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1714-2100_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1714-2100_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1714-2100_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J1714-2100_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0936396 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000246821 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.790757 0.790757 1.58151 3.16303 6.32606 12.6521 25.3042 50.6085
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.093 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  379.383 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1714-2100_S_a_dfm.log closed on Sun Jan 13 22:05:40 2019