! Started logfile: /vlbi/uf001/uva//J1709-3525_S_dfm.log on Mon Jan 14 04:02:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1709-3525_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1709-3525_S_uva.fits
! AN table 1: 36 integrations on 1 of 1 possible baselines.
! AN table 2: 36 integrations on 10 of 10 possible baselines.
! AN table 3: 37 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.994778 visibilities/baseline/integration-bin.
! Found source: J1709-3525
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2286 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1709-3525_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.015569Jy  sigma=12.409098
! Fit after  self-cal, rms=0.839461Jy  sigma=10.072862
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.082 mas, bmaj=32.36 mas, bpa=-7.566 degrees
! Estimated noise=2.06614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13186 Jy
! Component: 100  -  total flux cleaned = 0.19672 Jy
! Total flux subtracted in 100 components = 0.19672 Jy
! Clean residual min=-0.026834 max=0.033720 Jy/beam
! Clean residual mean=-0.000469 rms=0.011599 Jy/beam
! Combined flux in latest and established models = 0.19672 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.19672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.129789Jy  sigma=1.605555
! Fit after  self-cal, rms=0.128922Jy  sigma=1.592758
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.907 mas, bmaj=34.41 mas, bpa=-6.802 degrees
! Estimated noise=1.26682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0547429 Jy
! Component: 100  -  total flux cleaned = 0.0701393 Jy
! Component: 150  -  total flux cleaned = 0.0794598 Jy
! Component: 200  -  total flux cleaned = 0.0838687 Jy
! Total flux subtracted in 200 components = 0.0838687 Jy
! Clean residual min=-0.012490 max=0.012561 Jy/beam
! Clean residual mean=-0.000395 rms=0.006099 Jy/beam
! Combined flux in latest and established models = 0.280588 Jy
! Performing phase self-cal
! Adding 142 model components to the UV plane model.
! The established model now contains 190 components and 0.280588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102344Jy  sigma=1.169889
! Fit after  self-cal, rms=0.102028Jy  sigma=1.163647
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.907 x 34.41 at -6.802 degrees (North through East)
! Clean map  min=-0.02166  max=0.14836 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.98     LA        0.92     NL        1.30     OV        0.94     
!   PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.24     KP        0.85     LA        1.14     NL        1.11     
!   OV        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.94     LA        0.95     NL        1.15     OV        0.91     
!   PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.57     KP        0.86     LA        1.15     NL        0.93     
!   OV        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.91     LA        0.91     NL        1.19     OV        0.99     
!   PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.12     KP        0.94     LA        0.96     NL        0.80     
!   OV        0.95     
! 
! 
! Fit before self-cal, rms=0.102028Jy  sigma=1.163647
! Fit after  self-cal, rms=0.107730Jy  sigma=1.098704
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.125 mas, bmaj=36.23 mas, bpa=-6.401 degrees
! Estimated noise=1.23102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129504 Jy
! Component: 100  -  total flux cleaned = 0.0171239 Jy
! Component: 150  -  total flux cleaned = 0.0205856 Jy
! Component: 200  -  total flux cleaned = 0.0220677 Jy
! Total flux subtracted in 200 components = 0.0220677 Jy
! Clean residual min=-0.002679 max=0.002693 Jy/beam
! Clean residual mean=-0.000063 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.302656 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 287 components and 0.302656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105964Jy  sigma=1.068714
! Fit after  self-cal, rms=0.106190Jy  sigma=1.066563
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106190Jy  sigma=1.066563
! Fit after  self-cal, rms=0.105369Jy  sigma=1.065927
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.133 mas, bmaj=36.32 mas, bpa=-6.234 degrees
! Estimated noise=1.22463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127419 Jy
! Component: 100  -  total flux cleaned = 0.000146965 Jy
! Component: 150  -  total flux cleaned = -0.000186335 Jy
! Component: 200  -  total flux cleaned = -0.000371697 Jy
! Total flux subtracted in 200 components = -0.000371697 Jy
! Clean residual min=-0.001367 max=0.001375 Jy/beam
! Clean residual mean=-0.000017 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.302284 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 348 components and 0.302284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104969Jy  sigma=1.062201
! Fit after  self-cal, rms=0.104952Jy  sigma=1.061897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113087 Jy
! Component: 100  -  total flux cleaned = -0.00122602 Jy
! Component: 150  -  total flux cleaned = -0.000932393 Jy
! Component: 200  -  total flux cleaned = -0.000465577 Jy
! Total flux subtracted in 200 components = -0.000465577 Jy
! Clean residual min=-0.001048 max=0.001044 Jy/beam
! Clean residual mean=-0.000009 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.301819 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 390 components and 0.301819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104765Jy  sigma=1.060714
! Fit after  self-cal, rms=0.104746Jy  sigma=1.060590
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104746Jy  sigma=1.060590
! Fit after  self-cal, rms=0.104542Jy  sigma=1.060497
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.151 mas, bmaj=36.31 mas, bpa=-6.278 degrees
! Estimated noise=1.22746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000540913 Jy
! Component: 100  -  total flux cleaned = -0.000206608 Jy
! Component: 150  -  total flux cleaned = 0.00021622 Jy
! Component: 200  -  total flux cleaned = 0.000656367 Jy
! Total flux subtracted in 200 components = 0.000656367 Jy
! Clean residual min=-0.000880 max=0.000879 Jy/beam
! Clean residual mean=-0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.302475 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 423 components and 0.302475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104417Jy  sigma=1.059781
! Fit after  self-cal, rms=0.104403Jy  sigma=1.059715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205527 Jy
! Component: 100  -  total flux cleaned = 0.00018466 Jy
! Component: 150  -  total flux cleaned = 0.000339699 Jy
! Component: 200  -  total flux cleaned = 0.000534976 Jy
! Total flux subtracted in 200 components = 0.000534976 Jy
! Clean residual min=-0.000804 max=0.000797 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.30301 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 472 components and 0.30301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104311Jy  sigma=1.059224
! Fit after  self-cal, rms=0.104307Jy  sigma=1.059192
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104307Jy  sigma=1.059192
! Fit after  self-cal, rms=0.103891Jy  sigma=1.059146
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.527 mas, bmaj=39.87 mas, bpa=-6.132 degrees
! Estimated noise=1.22584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000525832 Jy
! Component: 100  -  total flux cleaned = 0.00101253 Jy
! Component: 150  -  total flux cleaned = 0.00131269 Jy
! Component: 200  -  total flux cleaned = 0.00148782 Jy
! Total flux subtracted in 200 components = 0.00148782 Jy
! Clean residual min=-0.000576 max=0.000578 Jy/beam
! Clean residual mean=0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.304498 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 503 components and 0.304498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103832Jy  sigma=1.058842
! Fit after  self-cal, rms=0.103818Jy  sigma=1.058822
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.94569e-05 Jy
! Component: 100  -  total flux cleaned = 0.00019268 Jy
! Component: 150  -  total flux cleaned = 0.000224803 Jy
! Component: 200  -  total flux cleaned = 0.000288306 Jy
! Total flux subtracted in 200 components = 0.000288306 Jy
! Clean residual min=-0.000521 max=0.000524 Jy/beam
! Clean residual mean=-0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.304786 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 533 components and 0.304786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103770Jy  sigma=1.058561
! Fit after  self-cal, rms=0.103767Jy  sigma=1.058550
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.16 mas, bmaj=36.28 mas, bpa=-6.314 degrees
! Estimated noise=1.22736 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.16 x 36.28 at -6.314 degrees (North through East)
! Clean map  min=-0.0099419  max=0.14129 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.235 mas, bmaj=33.71 mas, bpa=-6.585 degrees
! Estimated noise=2.02467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128522 Jy
! Component: 100  -  total flux cleaned = 0.19092 Jy
! Component: 150  -  total flux cleaned = 0.218294 Jy
! Component: 200  -  total flux cleaned = 0.217444 Jy
! Total flux subtracted in 200 components = 0.217444 Jy
! Clean residual min=-0.014976 max=0.015016 Jy/beam
! Clean residual mean=-0.000293 rms=0.005978 Jy/beam
! Combined flux in latest and established models = 0.217444 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 91 model components to the UV plane model.
! The established model now contains 91 components and 0.217444 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.16 mas, bmaj=36.28 mas, bpa=-6.314 degrees
! Estimated noise=1.22736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109336 Jy
! Component: 100  -  total flux cleaned = 0.0198359 Jy
! Component: 150  -  total flux cleaned = 0.0256254 Jy
! Component: 200  -  total flux cleaned = 0.0295324 Jy
! Total flux subtracted in 200 components = 0.0295324 Jy
! Clean residual min=-0.007106 max=0.007125 Jy/beam
! Clean residual mean=-0.000220 rms=0.003369 Jy/beam
! Combined flux in latest and established models = 0.246976 Jy
! Adding 136 model components to the UV plane model.
! The established model now contains 227 components and 0.246977 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.527 mas, bmaj=39.87 mas, bpa=-6.132 degrees
! Estimated noise=1.22584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00780832 Jy
! Component: 100  -  total flux cleaned = 0.0125826 Jy
! Component: 150  -  total flux cleaned = 0.0136788 Jy
! Component: 200  -  total flux cleaned = 0.0137146 Jy
! Total flux subtracted in 200 components = 0.0137146 Jy
! Clean residual min=-0.003461 max=0.003476 Jy/beam
! Clean residual mean=-0.000121 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.260691 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119307 Jy
! Component: 100  -  total flux cleaned = -0.00231252 Jy
! Component: 150  -  total flux cleaned = -0.0033865 Jy
! Component: 200  -  total flux cleaned = -0.00458482 Jy
! Total flux subtracted in 200 components = -0.00458482 Jy
! Clean residual min=-0.002776 max=0.002809 Jy/beam
! Clean residual mean=-0.000089 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.256106 Jy
! Adding 176 model components to the UV plane model.
! The established model now contains 400 components and 0.256106 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.16 mas, bmaj=36.28 mas, bpa=-6.314 degrees
! Estimated noise=1.22736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136681 Jy
! Component: 100  -  total flux cleaned = 0.0014911 Jy
! Component: 150  -  total flux cleaned = 0.00177466 Jy
! Component: 200  -  total flux cleaned = 0.00154546 Jy
! Total flux subtracted in 200 components = 0.00154546 Jy
! Clean residual min=-0.001253 max=0.001255 Jy/beam
! Clean residual mean=-0.000017 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.257652 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 481 components and 0.257652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103839Jy  sigma=1.060219
! Fit after  self-cal, rms=0.103777Jy  sigma=1.059458
wmodel J1709-3525_S_map.mod
! Writing 481 model components to file: J1709-3525_S_map.mod
wobs   J1709-3525_S_uvs.fits
! Writing UV FITS file: J1709-3525_S_uvs.fits
wwins  J1709-3525_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J1709-3525_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.16 x 36.28 at -6.314 degrees (North through East)
! Clean map  min=-0.011935  max=0.13189 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1709-3525_S_map.fits
wmodel /vlbi/uf001/uva//J1709-3525_S_map.mod
! Writing 481 model components to file: /vlbi/uf001/uva//J1709-3525_S_map.mod
wobs   /vlbi/uf001/uva//J1709-3525_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1709-3525_S_uvs.fits
wwins  /vlbi/uf001/uva//J1709-3525_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.131893 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000461572 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04988 1.04988 2.09975 4.19951 8.39901 16.798 33.5961 67.1921
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  285.747 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1709-3525_S_dfm.log closed on Mon Jan 14 04:02:58 2019