! Started logfile: /vlbi/uf001/uva//J1708+0035_X_dfm.log on Mon Jan 14 04:02:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1708+0035_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1708+0035_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.91384 visibilities/baseline/integration-bin. ! Found source: J1708+0035 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1708+0035_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008215Jy sigma=25.703964 ! Fit after self-cal, rms=0.896971Jy sigma=22.809543 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7064 mas, bmaj=1.762 mas, bpa=-5.193 degrees ! Estimated noise=0.273321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797176 Jy ! Component: 100 - total flux cleaned = 0.0977529 Jy ! Total flux subtracted in 100 components = 0.0977529 Jy ! Clean residual min=-0.004897 max=0.007826 Jy/beam ! Clean residual mean=-0.000003 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.0977529 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0977529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063245Jy sigma=1.497082 ! Fit after self-cal, rms=0.063132Jy sigma=1.496014 ! Inverting map ! Added new window around map position (-1.2, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815007 Jy ! Component: 100 - total flux cleaned = 0.0128517 Jy ! Total flux subtracted in 100 components = 0.0128517 Jy ! Clean residual min=-0.004711 max=0.005598 Jy/beam ! Clean residual mean=-0.000002 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.110605 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.110605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061683Jy sigma=1.448763 ! Fit after self-cal, rms=0.061619Jy sigma=1.447219 ! Inverting map ! Added new window around map position (-8, 16.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606578 Jy ! Component: 100 - total flux cleaned = 0.0102639 Jy ! Total flux subtracted in 100 components = 0.0102639 Jy ! Clean residual min=-0.004483 max=0.005457 Jy/beam ! Clean residual mean=-0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.120868 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.120868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060330Jy sigma=1.411940 ! Fit after self-cal, rms=0.060278Jy sigma=1.410481 ! Inverting map ! Added new window around map position (-6, 14.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557402 Jy ! Component: 100 - total flux cleaned = 0.00930327 Jy ! Total flux subtracted in 100 components = 0.00930327 Jy ! Clean residual min=-0.004298 max=0.004940 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.130172 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.130172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059182Jy sigma=1.380854 ! Fit after self-cal, rms=0.059109Jy sigma=1.379316 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447485 Jy ! Component: 100 - total flux cleaned = 0.00763805 Jy ! Total flux subtracted in 100 components = 0.00763805 Jy ! Clean residual min=-0.003597 max=0.003651 Jy/beam ! Clean residual mean=-0.000001 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.13781 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.13781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058500Jy sigma=1.362920 ! Fit after self-cal, rms=0.058480Jy sigma=1.362231 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8903 mas, bmaj=2.081 mas, bpa=-4.079 degrees ! Estimated noise=0.174002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679578 Jy ! Component: 100 - total flux cleaned = 0.0118061 Jy ! Component: 150 - total flux cleaned = 0.0157976 Jy ! Component: 200 - total flux cleaned = 0.0191224 Jy ! Total flux subtracted in 200 components = 0.0191224 Jy ! Clean residual min=-0.003795 max=0.004358 Jy/beam ! Clean residual mean=-0.000002 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.156932 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 98 components and 0.156932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057344Jy sigma=1.331565 ! Fit after self-cal, rms=0.057276Jy sigma=1.329552 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8903 x 2.081 at -4.079 degrees (North through East) ! Clean map min=-0.0034642 max=0.10109 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.98 KP 0.98 ! LA 0.99 MK 1.00 NL 1.09 OV 0.94 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.98 KP 1.03 ! LA 0.96 MK 1.01 NL 1.07 OV 0.91 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.99 KP 1.00 ! LA 0.96 MK 1.00 NL 1.10 OV 0.90 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.99 KP 1.02 ! LA 0.97 MK 1.03 NL 1.05 OV 0.93 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00 KP 1.03 ! LA 0.94 MK 1.02 NL 1.08 OV 0.91 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.01 KP 1.00 ! LA 0.95 MK 0.98 NL 1.09 OV 0.94 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.00 KP 1.00 ! LA 0.94 MK 1.00 NL 1.10 OV 0.91 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.01 KP 1.02 ! LA 0.97 MK 1.01 NL 1.07 OV 0.89 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.01 KP 0.99 ! LA 0.97 MK 0.97 NL 1.04 OV 0.91 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.00 KP 1.02 ! LA 0.96 MK 1.01 NL 1.09 OV 0.92 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.03 KP 1.03 ! LA 0.96 MK 0.98 NL 1.06 OV 0.91 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 1.04 KP 0.98 ! LA 0.92 MK 1.05 NL 1.05 OV 0.96 ! PT 0.92 SC 1.07 ! ! ! Fit before self-cal, rms=0.057276Jy sigma=1.329552 ! Fit after self-cal, rms=0.056230Jy sigma=1.309311 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8974 mas, bmaj=2.116 mas, bpa=-4.102 degrees ! Estimated noise=0.171007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, 19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413567 Jy ! Component: 100 - total flux cleaned = 0.00674291 Jy ! Component: 150 - total flux cleaned = 0.00855236 Jy ! Component: 200 - total flux cleaned = 0.00965329 Jy ! Total flux subtracted in 200 components = 0.00965329 Jy ! Clean residual min=-0.002220 max=0.002836 Jy/beam ! Clean residual mean=0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.166586 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 0.166586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055869Jy sigma=1.298039 ! Fit after self-cal, rms=0.055887Jy sigma=1.297179 ! Inverting map ! Added new window around map position (-0.6, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288687 Jy ! Component: 100 - total flux cleaned = 0.00449895 Jy ! Component: 150 - total flux cleaned = 0.00536853 Jy ! Component: 200 - total flux cleaned = 0.00596446 Jy ! Total flux subtracted in 200 components = 0.00596446 Jy ! Clean residual min=-0.002028 max=0.002037 Jy/beam ! Clean residual mean=0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.17255 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 147 components and 0.17255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055715Jy sigma=1.292004 ! Fit after self-cal, rms=0.055703Jy sigma=1.291806 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055703Jy sigma=1.291806 ! Fit after self-cal, rms=0.059311Jy sigma=1.282122 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8964 mas, bmaj=2.117 mas, bpa=-4.068 degrees ! Estimated noise=0.172065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048571 Jy ! Component: 100 - total flux cleaned = 0.00108208 Jy ! Component: 150 - total flux cleaned = 0.00150515 Jy ! Component: 200 - total flux cleaned = 0.00181347 Jy ! Total flux subtracted in 200 components = 0.00181347 Jy ! Clean residual min=-0.001342 max=0.001208 Jy/beam ! Clean residual mean=0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.174363 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.174363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059266Jy sigma=1.280766 ! Fit after self-cal, rms=0.059311Jy sigma=1.280635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249468 Jy ! Component: 100 - total flux cleaned = 0.000550591 Jy ! Component: 150 - total flux cleaned = 0.000781954 Jy ! Component: 200 - total flux cleaned = 0.000976241 Jy ! Total flux subtracted in 200 components = 0.000976241 Jy ! Clean residual min=-0.001263 max=0.001151 Jy/beam ! Clean residual mean=0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.17534 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 189 components and 0.17534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059295Jy sigma=1.280209 ! Fit after self-cal, rms=0.059292Jy sigma=1.280195 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059292Jy sigma=1.280195 ! Fit after self-cal, rms=0.060262Jy sigma=1.280032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.897 mas, bmaj=2.119 mas, bpa=-4.08 degrees ! Estimated noise=0.172076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278232 Jy ! Component: 100 - total flux cleaned = -0.000116802 Jy ! Component: 150 - total flux cleaned = 6.35297e-05 Jy ! Component: 200 - total flux cleaned = 0.000180611 Jy ! Total flux subtracted in 200 components = 0.000180611 Jy ! Clean residual min=-0.001149 max=0.001136 Jy/beam ! Clean residual mean=0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.17552 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 198 components and 0.17552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060248Jy sigma=1.279690 ! Fit after self-cal, rms=0.060253Jy sigma=1.279670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.77512e-05 Jy ! Component: 100 - total flux cleaned = 0.000150205 Jy ! Component: 150 - total flux cleaned = 0.000209 Jy ! Component: 200 - total flux cleaned = 0.000264528 Jy ! Total flux subtracted in 200 components = 0.000264528 Jy ! Clean residual min=-0.001103 max=0.001127 Jy/beam ! Clean residual mean=0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.175785 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 203 components and 0.175785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060245Jy sigma=1.279490 ! Fit after self-cal, rms=0.060243Jy sigma=1.279485 ! Inverting map ! Added new window around map position (-1.4, -23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715463 Jy ! Component: 100 - total flux cleaned = 0.000620151 Jy ! Component: 150 - total flux cleaned = 0.000653157 Jy ! Component: 200 - total flux cleaned = 0.000758929 Jy ! Total flux subtracted in 200 components = 0.000758929 Jy ! Clean residual min=-0.001051 max=0.001064 Jy/beam ! Clean residual mean=0.000000 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.176544 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 220 components and 0.176544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060225Jy sigma=1.279047 ! Fit after self-cal, rms=0.060224Jy sigma=1.279032 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060224Jy sigma=1.279032 ! Fit after self-cal, rms=0.060307Jy sigma=1.278961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=3.462 mas, bpa=-1.722 degrees ! Estimated noise=0.215676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709305 Jy ! Component: 100 - total flux cleaned = 0.000897567 Jy ! Component: 150 - total flux cleaned = 0.00103293 Jy ! Component: 200 - total flux cleaned = 0.00111358 Jy ! Total flux subtracted in 200 components = 0.00111358 Jy ! Clean residual min=-0.001395 max=0.001147 Jy/beam ! Clean residual mean=0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.177657 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 228 components and 0.177657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060297Jy sigma=1.278912 ! Fit after self-cal, rms=0.060297Jy sigma=1.278889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014212 Jy ! Component: 100 - total flux cleaned = 0.000177006 Jy ! Component: 150 - total flux cleaned = 0.000209524 Jy ! Component: 200 - total flux cleaned = 0.000239841 Jy ! Total flux subtracted in 200 components = 0.000239841 Jy ! Clean residual min=-0.001374 max=0.001146 Jy/beam ! Clean residual mean=0.000000 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.177897 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 236 components and 0.177897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060293Jy sigma=1.278925 ! Fit after self-cal, rms=0.060292Jy sigma=1.278919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8974 mas, bmaj=2.12 mas, bpa=-4.063 degrees ! Estimated noise=0.1719 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8974 x 2.12 at -4.063 degrees (North through East) ! Clean map min=-0.00095534 max=0.099735 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7079 mas, bmaj=1.784 mas, bpa=-5.143 degrees ! Estimated noise=0.274755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799284 Jy ! Component: 100 - total flux cleaned = 0.0988669 Jy ! Component: 150 - total flux cleaned = 0.108543 Jy ! Component: 200 - total flux cleaned = 0.115544 Jy ! Total flux subtracted in 200 components = 0.115544 Jy ! Clean residual min=-0.002658 max=0.004407 Jy/beam ! Clean residual mean=-0.000002 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.115544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.115544 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8974 mas, bmaj=2.12 mas, bpa=-4.063 degrees ! Estimated noise=0.1719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108444 Jy ! Component: 100 - total flux cleaned = 0.018537 Jy ! Component: 150 - total flux cleaned = 0.0244533 Jy ! Component: 200 - total flux cleaned = 0.0291946 Jy ! Total flux subtracted in 200 components = 0.0291946 Jy ! Clean residual min=-0.002223 max=0.003395 Jy/beam ! Clean residual mean=-0.000003 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.144739 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 91 components and 0.144739 Jy ! Inverting map ! Added new window around map position (-7.2, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398097 Jy ! Component: 100 - total flux cleaned = 0.00722565 Jy ! Component: 150 - total flux cleaned = 0.00998702 Jy ! Component: 200 - total flux cleaned = 0.0123712 Jy ! Total flux subtracted in 200 components = 0.0123712 Jy ! Clean residual min=-0.001630 max=0.002035 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.15711 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 144 components and 0.15711 Jy ! Inverting map ! Added new window around map position (-9, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023046 Jy ! Component: 100 - total flux cleaned = 0.00417419 Jy ! Component: 150 - total flux cleaned = 0.00581913 Jy ! Component: 200 - total flux cleaned = 0.00722416 Jy ! Total flux subtracted in 200 components = 0.00722416 Jy ! Clean residual min=-0.001354 max=0.001468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.164334 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 189 components and 0.164334 Jy ! Inverting map ! Added new window around map position (10.6, 49.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141945 Jy ! Component: 100 - total flux cleaned = 0.00252984 Jy ! Component: 150 - total flux cleaned = 0.00358411 Jy ! Component: 200 - total flux cleaned = 0.00451374 Jy ! Total flux subtracted in 200 components = 0.00451374 Jy ! Clean residual min=-0.001204 max=0.001008 Jy/beam ! Clean residual mean=-0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.168848 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 215 components and 0.168848 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=3.462 mas, bpa=-1.722 degrees ! Estimated noise=0.215676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169085 Jy ! Component: 100 - total flux cleaned = 0.00299825 Jy ! Component: 150 - total flux cleaned = 0.00407473 Jy ! Component: 200 - total flux cleaned = 0.0049878 Jy ! Total flux subtracted in 200 components = 0.0049878 Jy ! Clean residual min=-0.001379 max=0.001302 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.173836 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805138 Jy ! Component: 100 - total flux cleaned = 0.00151976 Jy ! Component: 150 - total flux cleaned = 0.00215622 Jy ! Component: 200 - total flux cleaned = 0.00270219 Jy ! Total flux subtracted in 200 components = 0.00270219 Jy ! Clean residual min=-0.001264 max=0.001181 Jy/beam ! Clean residual mean=-0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.176538 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 294 components and 0.176538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8974 mas, bmaj=2.12 mas, bpa=-4.063 degrees ! Estimated noise=0.1719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041851 Jy ! Component: 100 - total flux cleaned = 0.00072756 Jy ! Component: 150 - total flux cleaned = 0.00104305 Jy ! Component: 200 - total flux cleaned = 0.00123214 Jy ! Total flux subtracted in 200 components = 0.00123214 Jy ! Clean residual min=-0.000894 max=0.000963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.17777 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 320 components and 0.17777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060231Jy sigma=1.277704 ! Fit after self-cal, rms=0.060218Jy sigma=1.277479 wmodel J1708+0035_X_map.mod ! Writing 320 model components to file: J1708+0035_X_map.mod wobs J1708+0035_X_uvs.fits ! Writing UV FITS file: J1708+0035_X_uvs.fits wwins J1708+0035_X_map.win ! wwins: Wrote 11 windows to J1708+0035_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123532 Jy ! Component: 100 - total flux cleaned = 0.000204229 Jy ! Component: 150 - total flux cleaned = 0.00023442 Jy ! Component: 200 - total flux cleaned = 0.000234738 Jy ! Component: 250 - total flux cleaned = 0.000248872 Jy ! Component: 300 - total flux cleaned = 0.000290345 Jy ! Component: 350 - total flux cleaned = 0.000236057 Jy ! Component: 400 - total flux cleaned = 0.000249823 Jy ! Component: 450 - total flux cleaned = 0.000210784 Jy ! Component: 500 - total flux cleaned = 0.000223577 Jy ! Component: 550 - total flux cleaned = 0.000198073 Jy ! Component: 600 - total flux cleaned = 0.000160715 Jy ! Component: 650 - total flux cleaned = 0.000172926 Jy ! Component: 700 - total flux cleaned = 0.000136719 Jy ! Component: 750 - total flux cleaned = 0.000112958 Jy ! Component: 800 - total flux cleaned = 0.000136517 Jy ! Component: 850 - total flux cleaned = 0.000101677 Jy ! Component: 900 - total flux cleaned = 6.73038e-05 Jy ! Component: 950 - total flux cleaned = 6.71637e-05 Jy ! Component: 1000 - total flux cleaned = 3.34071e-05 Jy ! Component: 1050 - total flux cleaned = 1.11145e-05 Jy ! Component: 1100 - total flux cleaned = -3.2928e-05 Jy ! Component: 1150 - total flux cleaned = -6.5474e-05 Jy ! Component: 1200 - total flux cleaned = -0.000108634 Jy ! Component: 1250 - total flux cleaned = -0.000161813 Jy ! Component: 1300 - total flux cleaned = -0.000204069 Jy ! Component: 1350 - total flux cleaned = -0.00024588 Jy ! Component: 1400 - total flux cleaned = -0.000308007 Jy ! Component: 1450 - total flux cleaned = -0.000359397 Jy ! Component: 1500 - total flux cleaned = -0.000400194 Jy ! Component: 1550 - total flux cleaned = -0.000430484 Jy ! Component: 1600 - total flux cleaned = -0.000460588 Jy ! Component: 1650 - total flux cleaned = -0.000510206 Jy ! Component: 1700 - total flux cleaned = -0.000559441 Jy ! Component: 1750 - total flux cleaned = -0.000617993 Jy ! Component: 1800 - total flux cleaned = -0.000685714 Jy ! Component: 1850 - total flux cleaned = -0.000752694 Jy ! Component: 1900 - total flux cleaned = -0.000752719 Jy ! Component: 1950 - total flux cleaned = -0.000809353 Jy ! Component: 2000 - total flux cleaned = -0.00085624 Jy ! Component: 2050 - total flux cleaned = -0.000856174 Jy ! Component: 2100 - total flux cleaned = -0.0009207 Jy ! Component: 2150 - total flux cleaned = -0.000966499 Jy ! Component: 2200 - total flux cleaned = -0.000957406 Jy ! Component: 2250 - total flux cleaned = -0.00100249 Jy ! Component: 2300 - total flux cleaned = -0.0010383 Jy ! Component: 2350 - total flux cleaned = -0.00107396 Jy ! Component: 2400 - total flux cleaned = -0.0011181 Jy ! Component: 2450 - total flux cleaned = -0.00117954 Jy ! Component: 2500 - total flux cleaned = -0.00117089 Jy ! Component: 2550 - total flux cleaned = -0.00124016 Jy ! Component: 2600 - total flux cleaned = -0.00126599 Jy ! Component: 2650 - total flux cleaned = -0.00130873 Jy ! Component: 2700 - total flux cleaned = -0.00134269 Jy ! Component: 2750 - total flux cleaned = -0.00134264 Jy ! Component: 2800 - total flux cleaned = -0.00138454 Jy ! Component: 2850 - total flux cleaned = -0.00143455 Jy ! Component: 2900 - total flux cleaned = -0.00144282 Jy ! Component: 2950 - total flux cleaned = -0.0014428 Jy ! Component: 3000 - total flux cleaned = -0.00145926 Jy ! Component: 3050 - total flux cleaned = -0.00150809 Jy ! Component: 3100 - total flux cleaned = -0.00150814 Jy ! Component: 3150 - total flux cleaned = -0.00151621 Jy ! Component: 3200 - total flux cleaned = -0.00153215 Jy ! Component: 3250 - total flux cleaned = -0.00154807 Jy ! Component: 3300 - total flux cleaned = -0.00155598 Jy ! Component: 3350 - total flux cleaned = -0.0015638 Jy ! Component: 3400 - total flux cleaned = -0.00161858 Jy ! Component: 3450 - total flux cleaned = -0.00162632 Jy ! Component: 3500 - total flux cleaned = -0.00157986 Jy ! Component: 3550 - total flux cleaned = -0.00159523 Jy ! Component: 3600 - total flux cleaned = -0.00161818 Jy ! Component: 3650 - total flux cleaned = -0.00161826 Jy ! Component: 3700 - total flux cleaned = -0.00163344 Jy ! Component: 3750 - total flux cleaned = -0.00162585 Jy ! Component: 3800 - total flux cleaned = -0.00161086 Jy ! Component: 3850 - total flux cleaned = -0.00162577 Jy ! Component: 3900 - total flux cleaned = -0.00158124 Jy ! Component: 3950 - total flux cleaned = -0.00159597 Jy ! Component: 4000 - total flux cleaned = -0.00161802 Jy ! Component: 4050 - total flux cleaned = -0.00155954 Jy ! Total flux subtracted in 4096 components = -0.00161764 Jy ! Clean residual min=-0.000422 max=0.000399 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.176152 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 631 components and 0.176152 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1708+0035_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8974 x 2.12 at -4.063 degrees (North through East) ! Clean map min=-0.00069021 max=0.099755 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1708+0035_X_map.fits wmodel /vlbi/uf001/uva//J1708+0035_X_map.mod ! Writing 631 model components to file: /vlbi/uf001/uva//J1708+0035_X_map.mod wobs /vlbi/uf001/uva//J1708+0035_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1708+0035_X_uvs.fits wwins /vlbi/uf001/uva//J1708+0035_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1708+0035_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0997551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000128071 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385158 0.385158 0.770316 1.54063 3.08126 6.16252 12.325 24.6501 49.3002 98.6004 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.099 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 778.901 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1708+0035_X_dfm.log closed on Mon Jan 14 04:02:31 2019