! Started logfile: /vlbi/uf001/uva//J1657+5705_X_dfm.log on Mon Jan 14 03:58:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1657+5705_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1657+5705_X_uva.fits ! AN table 1: 68 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860784 visibilities/baseline/integration-bin. ! Found source: J1657+5705 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31608 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1657+5705_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.100809Jy sigma=23.191336 ! Fit after self-cal, rms=0.559699Jy sigma=11.816646 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7315 mas, bmaj=1.037 mas, bpa=1.172 degrees ! Estimated noise=0.36439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331143 Jy ! Component: 100 - total flux cleaned = 0.409152 Jy ! Total flux subtracted in 100 components = 0.409152 Jy ! Clean residual min=-0.010721 max=0.030046 Jy/beam ! Clean residual mean=-0.000015 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.409152 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.409152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091782Jy sigma=1.899148 ! Fit after self-cal, rms=0.091778Jy sigma=1.898963 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031724 Jy ! Component: 100 - total flux cleaned = 0.0465614 Jy ! Total flux subtracted in 100 components = 0.0465614 Jy ! Clean residual min=-0.007753 max=0.023502 Jy/beam ! Clean residual mean=-0.000007 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.455713 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.455713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075736Jy sigma=1.582216 ! Fit after self-cal, rms=0.075721Jy sigma=1.581847 ! Inverting map ! Added new window around map position (1.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197717 Jy ! Component: 100 - total flux cleaned = 0.0295109 Jy ! Total flux subtracted in 100 components = 0.0295109 Jy ! Clean residual min=-0.008795 max=0.012685 Jy/beam ! Clean residual mean=-0.000002 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.485224 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.485224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068386Jy sigma=1.419042 ! Fit after self-cal, rms=0.067599Jy sigma=1.403283 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917938 Jy ! Component: 100 - total flux cleaned = 0.0152112 Jy ! Total flux subtracted in 100 components = 0.0152112 Jy ! Clean residual min=-0.007503 max=0.008918 Jy/beam ! Clean residual mean=-0.000000 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.500435 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.500435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065519Jy sigma=1.356731 ! Fit after self-cal, rms=0.065363Jy sigma=1.353624 ! Inverting map ! Added new window around map position (-0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770123 Jy ! Component: 100 - total flux cleaned = 0.0124655 Jy ! Total flux subtracted in 100 components = 0.0124655 Jy ! Clean residual min=-0.006970 max=0.006939 Jy/beam ! Clean residual mean=0.000002 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.512901 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.512901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064099Jy sigma=1.323886 ! Fit after self-cal, rms=0.064045Jy sigma=1.322689 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9421 mas, bmaj=1.313 mas, bpa=2.42 degrees ! Estimated noise=0.206117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665168 Jy ! Component: 100 - total flux cleaned = 0.0111232 Jy ! Component: 150 - total flux cleaned = 0.0142992 Jy ! Component: 200 - total flux cleaned = 0.0161115 Jy ! Total flux subtracted in 200 components = 0.0161115 Jy ! Clean residual min=-0.006473 max=0.006296 Jy/beam ! Clean residual mean=0.000009 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.529012 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 39 components and 0.529012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063280Jy sigma=1.303214 ! Fit after self-cal, rms=0.063251Jy sigma=1.302569 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9421 x 1.313 at 2.42 degrees (North through East) ! Clean map min=-0.0062365 max=0.43107 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.96 KP 1.03 ! LA 1.00 MK 1.02 NL 1.06 OV 0.92 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.96 KP 1.04 ! LA 1.01 MK 1.02 NL 1.07 OV 0.92 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.95 KP 1.03 ! LA 1.01 MK 1.02 NL 1.07 OV 0.92 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.95 KP 1.04 ! LA 1.01 MK 1.02 NL 1.07 OV 0.91 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.95 KP 1.04 ! LA 1.01 MK 1.03 NL 1.07 OV 0.92 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.96 KP 1.03 ! LA 1.00 MK 1.03 NL 1.07 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.96 KP 1.04 ! LA 1.01 MK 1.03 NL 1.08 OV 0.91 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.96 KP 1.04 ! LA 1.02 MK 1.04 NL 1.07 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.98 KP 1.04 ! LA 1.02 MK 1.03 NL 1.07 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.04 ! LA 1.01 MK 1.03 NL 1.08 OV 0.92 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.97 KP 1.05 ! LA 1.02 MK 1.03 NL 1.08 OV 0.92 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.05 ! LA 1.02 MK 1.03 NL 1.07 OV 0.91 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.063251Jy sigma=1.302569 ! Fit after self-cal, rms=0.055640Jy sigma=1.125741 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9416 mas, bmaj=1.316 mas, bpa=2.792 degrees ! Estimated noise=0.206599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00569184 Jy ! Component: 100 - total flux cleaned = -0.00686106 Jy ! Component: 150 - total flux cleaned = -0.00707521 Jy ! Component: 200 - total flux cleaned = -0.00733866 Jy ! Total flux subtracted in 200 components = -0.00733866 Jy ! Clean residual min=-0.002540 max=0.002608 Jy/beam ! Clean residual mean=0.000014 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.521674 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.521674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054869Jy sigma=1.110832 ! Fit after self-cal, rms=0.054881Jy sigma=1.110455 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054881Jy sigma=1.110455 ! Fit after self-cal, rms=0.053838Jy sigma=1.088673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9413 mas, bmaj=1.314 mas, bpa=2.943 degrees ! Estimated noise=0.206524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024217 Jy ! Component: 100 - total flux cleaned = -0.00296526 Jy ! Component: 150 - total flux cleaned = -0.00334863 Jy ! Component: 200 - total flux cleaned = -0.00367842 Jy ! Total flux subtracted in 200 components = -0.00367842 Jy ! Clean residual min=-0.002187 max=0.002363 Jy/beam ! Clean residual mean=0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.517995 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.517995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053632Jy sigma=1.084404 ! Fit after self-cal, rms=0.053627Jy sigma=1.084234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134057 Jy ! Component: 100 - total flux cleaned = 0.00144781 Jy ! Component: 150 - total flux cleaned = 0.00149234 Jy ! Component: 200 - total flux cleaned = 0.00157316 Jy ! Total flux subtracted in 200 components = 0.00157316 Jy ! Clean residual min=-0.002057 max=0.001994 Jy/beam ! Clean residual mean=-0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.519568 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.519568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053522Jy sigma=1.082109 ! Fit after self-cal, rms=0.053519Jy sigma=1.082035 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053519Jy sigma=1.082035 ! Fit after self-cal, rms=0.053450Jy sigma=1.080448 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9405 mas, bmaj=1.314 mas, bpa=2.966 degrees ! Estimated noise=0.206625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015064 Jy ! Component: 100 - total flux cleaned = -0.00185851 Jy ! Component: 150 - total flux cleaned = -0.00200655 Jy ! Component: 200 - total flux cleaned = -0.00204888 Jy ! Total flux subtracted in 200 components = -0.00204888 Jy ! Clean residual min=-0.001830 max=0.001893 Jy/beam ! Clean residual mean=-0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.51752 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.51752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053342Jy sigma=1.078217 ! Fit after self-cal, rms=0.053340Jy sigma=1.078168 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975982 Jy ! Component: 100 - total flux cleaned = 0.000931019 Jy ! Component: 150 - total flux cleaned = 0.000887331 Jy ! Component: 200 - total flux cleaned = 0.000886 Jy ! Total flux subtracted in 200 components = 0.000886 Jy ! Clean residual min=-0.001622 max=0.001595 Jy/beam ! Clean residual mean=-0.000002 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.518406 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.518405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053255Jy sigma=1.076487 ! Fit after self-cal, rms=0.053252Jy sigma=1.076434 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053252Jy sigma=1.076434 ! Fit after self-cal, rms=0.053219Jy sigma=1.075742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=2.512 mas, bpa=18.66 degrees ! Estimated noise=0.274723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000815649 Jy ! Component: 100 - total flux cleaned = -0.000851866 Jy ! Component: 150 - total flux cleaned = -0.000952332 Jy ! Component: 200 - total flux cleaned = -0.00101206 Jy ! Total flux subtracted in 200 components = -0.00101206 Jy ! Clean residual min=-0.001657 max=0.001843 Jy/beam ! Clean residual mean=-0.000004 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.517393 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.517394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053185Jy sigma=1.075131 ! Fit after self-cal, rms=0.053183Jy sigma=1.075083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.4, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014074 Jy ! Component: 100 - total flux cleaned = 0.0017505 Jy ! Component: 150 - total flux cleaned = 0.00185226 Jy ! Component: 200 - total flux cleaned = 0.00209328 Jy ! Total flux subtracted in 200 components = 0.00209328 Jy ! Clean residual min=-0.001258 max=0.001134 Jy/beam ! Clean residual mean=-0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.519487 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 127 components and 0.519487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053132Jy sigma=1.073944 ! Fit after self-cal, rms=0.053129Jy sigma=1.073904 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=1.314 mas, bpa=2.97 degrees ! Estimated noise=0.206681 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9397 x 1.314 at 2.97 degrees (North through East) ! Clean map min=-0.0012193 max=0.43418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7297 mas, bmaj=1.036 mas, bpa=1.737 degrees ! Estimated noise=0.365192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331721 Jy ! Component: 100 - total flux cleaned = 0.409904 Jy ! Component: 150 - total flux cleaned = 0.444026 Jy ! Component: 200 - total flux cleaned = 0.464003 Jy ! Total flux subtracted in 200 components = 0.464003 Jy ! Clean residual min=-0.004502 max=0.010238 Jy/beam ! Clean residual mean=-0.000007 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.464003 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.464003 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=1.314 mas, bpa=2.97 degrees ! Estimated noise=0.206681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186741 Jy ! Component: 100 - total flux cleaned = 0.0289821 Jy ! Component: 150 - total flux cleaned = 0.0351611 Jy ! Component: 200 - total flux cleaned = 0.0392366 Jy ! Total flux subtracted in 200 components = 0.0392366 Jy ! Clean residual min=-0.001822 max=0.002634 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.50324 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.503239 Jy ! Inverting map ! Added new window around map position (1.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312323 Jy ! Component: 100 - total flux cleaned = 0.00560614 Jy ! Component: 150 - total flux cleaned = 0.00766286 Jy ! Component: 200 - total flux cleaned = 0.00926495 Jy ! Total flux subtracted in 200 components = 0.00926495 Jy ! Clean residual min=-0.001465 max=0.001542 Jy/beam ! Clean residual mean=-0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.512504 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 58 components and 0.512504 Jy ! Inverting map ! Added new window around map position (1.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143972 Jy ! Component: 100 - total flux cleaned = 0.00236719 Jy ! Component: 150 - total flux cleaned = 0.00306636 Jy ! Component: 200 - total flux cleaned = 0.00357399 Jy ! Total flux subtracted in 200 components = 0.00357399 Jy ! Clean residual min=-0.001309 max=0.001339 Jy/beam ! Clean residual mean=-0.000002 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.516078 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 84 components and 0.516078 Jy ! Inverting map ! Added new window around map position (-34.2, -17.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100789 Jy ! Component: 100 - total flux cleaned = 0.00150897 Jy ! Component: 150 - total flux cleaned = 0.00186471 Jy ! Component: 200 - total flux cleaned = 0.00209241 Jy ! Total flux subtracted in 200 components = 0.00209241 Jy ! Clean residual min=-0.001254 max=0.001348 Jy/beam ! Clean residual mean=-0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.518171 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 102 components and 0.518171 Jy ! Inverting map ! Added new window around map position (-7.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472543 Jy ! Component: 100 - total flux cleaned = 0.000618646 Jy ! Component: 150 - total flux cleaned = 0.0007239 Jy ! Component: 200 - total flux cleaned = 0.000826352 Jy ! Total flux subtracted in 200 components = 0.000826352 Jy ! Clean residual min=-0.001194 max=0.001255 Jy/beam ! Clean residual mean=-0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.518997 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 119 components and 0.518997 Jy ! Inverting map ! Added new window around map position (-9.6, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267577 Jy ! Component: 100 - total flux cleaned = 0.000538876 Jy ! Component: 150 - total flux cleaned = 0.000604168 Jy ! Component: 200 - total flux cleaned = 0.000728662 Jy ! Total flux subtracted in 200 components = 0.000728662 Jy ! Clean residual min=-0.001112 max=0.001119 Jy/beam ! Clean residual mean=-0.000002 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.519726 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 128 components and 0.519726 Jy ! Inverting map ! Added new window around map position (-19.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393056 Jy ! Component: 100 - total flux cleaned = 0.000485562 Jy ! Component: 150 - total flux cleaned = 0.000484392 Jy ! Component: 200 - total flux cleaned = 0.000483896 Jy ! Total flux subtracted in 200 components = 0.000483896 Jy ! Clean residual min=-0.001095 max=0.001095 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.520209 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 144 components and 0.520209 Jy ! Inverting map ! Added new window around map position (0.4, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683953 Jy ! Component: 100 - total flux cleaned = 0.000906648 Jy ! Component: 150 - total flux cleaned = 0.00101381 Jy ! Component: 200 - total flux cleaned = 0.00103965 Jy ! Total flux subtracted in 200 components = 0.00103965 Jy ! Clean residual min=-0.001069 max=0.001002 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.521249 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 161 components and 0.521249 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=2.512 mas, bpa=18.66 degrees ! Estimated noise=0.274723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315642 Jy ! Component: 100 - total flux cleaned = 0.000360188 Jy ! Component: 150 - total flux cleaned = 0.000463147 Jy ! Component: 200 - total flux cleaned = 0.000633467 Jy ! Total flux subtracted in 200 components = 0.000633467 Jy ! Clean residual min=-0.001049 max=0.001058 Jy/beam ! Clean residual mean=-0.000004 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.521883 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012173 Jy ! Component: 100 - total flux cleaned = 0.000203574 Jy ! Component: 150 - total flux cleaned = 0.000265353 Jy ! Component: 200 - total flux cleaned = 0.000294707 Jy ! Total flux subtracted in 200 components = 0.000294707 Jy ! Clean residual min=-0.001028 max=0.001037 Jy/beam ! Clean residual mean=-0.000004 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.522177 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 201 components and 0.522177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=1.314 mas, bpa=2.97 degrees ! Estimated noise=0.206681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300554 Jy ! Component: 100 - total flux cleaned = -0.000404608 Jy ! Component: 150 - total flux cleaned = -0.000477879 Jy ! Component: 200 - total flux cleaned = -0.000548584 Jy ! Total flux subtracted in 200 components = -0.000548584 Jy ! Clean residual min=-0.001010 max=0.001008 Jy/beam ! Clean residual mean=-0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.521629 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 219 components and 0.521629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052882Jy sigma=1.068681 ! Fit after self-cal, rms=0.052871Jy sigma=1.068454 wmodel J1657+5705_X_map.mod ! Writing 219 model components to file: J1657+5705_X_map.mod wobs J1657+5705_X_uvs.fits ! Writing UV FITS file: J1657+5705_X_uvs.fits wwins J1657+5705_X_map.win ! wwins: Wrote 13 windows to J1657+5705_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131976 Jy ! Component: 100 - total flux cleaned = -0.000253915 Jy ! Component: 150 - total flux cleaned = -0.000388244 Jy ! Component: 200 - total flux cleaned = -0.000470245 Jy ! Component: 250 - total flux cleaned = -0.000566282 Jy ! Component: 300 - total flux cleaned = -0.00067603 Jy ! Component: 350 - total flux cleaned = -0.000768447 Jy ! Component: 400 - total flux cleaned = -0.000844437 Jy ! Component: 450 - total flux cleaned = -0.000934277 Jy ! Component: 500 - total flux cleaned = -0.00103728 Jy ! Component: 550 - total flux cleaned = -0.00110984 Jy ! Component: 600 - total flux cleaned = -0.00118105 Jy ! Component: 650 - total flux cleaned = -0.00123742 Jy ! Component: 700 - total flux cleaned = -0.00129319 Jy ! Component: 750 - total flux cleaned = -0.00133444 Jy ! Component: 800 - total flux cleaned = -0.00140248 Jy ! Component: 850 - total flux cleaned = -0.00145625 Jy ! Component: 900 - total flux cleaned = -0.00152295 Jy ! Component: 950 - total flux cleaned = -0.00164171 Jy ! Component: 1000 - total flux cleaned = -0.0017067 Jy ! Component: 1050 - total flux cleaned = -0.00178432 Jy ! Component: 1100 - total flux cleaned = -0.00189969 Jy ! Component: 1150 - total flux cleaned = -0.00197608 Jy ! Component: 1200 - total flux cleaned = -0.00210231 Jy ! Component: 1250 - total flux cleaned = -0.00216488 Jy ! Component: 1300 - total flux cleaned = -0.00228923 Jy ! Component: 1350 - total flux cleaned = -0.00230164 Jy ! Component: 1400 - total flux cleaned = -0.00237501 Jy ! Component: 1450 - total flux cleaned = -0.0024723 Jy ! Component: 1500 - total flux cleaned = -0.00249632 Jy ! Component: 1550 - total flux cleaned = -0.00262809 Jy ! Component: 1600 - total flux cleaned = -0.00262807 Jy ! Component: 1650 - total flux cleaned = -0.00267539 Jy ! Component: 1700 - total flux cleaned = -0.00271059 Jy ! Component: 1750 - total flux cleaned = -0.00273409 Jy ! Component: 1800 - total flux cleaned = -0.00280366 Jy ! Component: 1850 - total flux cleaned = -0.0028267 Jy ! Component: 1900 - total flux cleaned = -0.00288392 Jy ! Component: 1950 - total flux cleaned = -0.00286124 Jy ! Component: 2000 - total flux cleaned = -0.00291791 Jy ! Component: 2050 - total flux cleaned = -0.00300792 Jy ! Component: 2100 - total flux cleaned = -0.00295189 Jy ! Component: 2150 - total flux cleaned = -0.0030299 Jy ! Component: 2200 - total flux cleaned = -0.0030631 Jy ! Component: 2250 - total flux cleaned = -0.00310722 Jy ! Component: 2300 - total flux cleaned = -0.00311808 Jy ! Component: 2350 - total flux cleaned = -0.00311813 Jy ! Component: 2400 - total flux cleaned = -0.00311807 Jy ! Component: 2450 - total flux cleaned = -0.00315051 Jy ! Component: 2500 - total flux cleaned = -0.00319351 Jy ! Component: 2550 - total flux cleaned = -0.0032362 Jy ! Component: 2600 - total flux cleaned = -0.00321495 Jy ! Component: 2650 - total flux cleaned = -0.00324679 Jy ! Component: 2700 - total flux cleaned = -0.00327836 Jy ! Component: 2750 - total flux cleaned = -0.00328887 Jy ! Component: 2800 - total flux cleaned = -0.0033305 Jy ! Component: 2850 - total flux cleaned = -0.00338236 Jy ! Component: 2900 - total flux cleaned = -0.00334106 Jy ! Component: 2950 - total flux cleaned = -0.00336167 Jy ! Component: 3000 - total flux cleaned = -0.00344356 Jy ! Component: 3050 - total flux cleaned = -0.00344363 Jy ! Component: 3100 - total flux cleaned = -0.00346387 Jy ! Component: 3150 - total flux cleaned = -0.00349416 Jy ! Component: 3200 - total flux cleaned = -0.003464 Jy ! Component: 3250 - total flux cleaned = -0.00349402 Jy ! Component: 3300 - total flux cleaned = -0.00349406 Jy ! Component: 3350 - total flux cleaned = -0.00353369 Jy ! Component: 3400 - total flux cleaned = -0.00353367 Jy ! Component: 3450 - total flux cleaned = -0.00351398 Jy ! Component: 3500 - total flux cleaned = -0.00356292 Jy ! Component: 3550 - total flux cleaned = -0.00355319 Jy ! Component: 3600 - total flux cleaned = -0.00347558 Jy ! Component: 3650 - total flux cleaned = -0.0035432 Jy ! Component: 3700 - total flux cleaned = -0.00353361 Jy ! Component: 3750 - total flux cleaned = -0.0035144 Jy ! Component: 3800 - total flux cleaned = -0.00355254 Jy ! Component: 3850 - total flux cleaned = -0.00359048 Jy ! Component: 3900 - total flux cleaned = -0.00355267 Jy ! Component: 3950 - total flux cleaned = -0.00356206 Jy ! Component: 4000 - total flux cleaned = -0.00356203 Jy ! Component: 4050 - total flux cleaned = -0.00356207 Jy ! Total flux subtracted in 4096 components = -0.00362716 Jy ! Clean residual min=-0.000583 max=0.000480 Jy/beam ! Clean residual mean=0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.518001 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 550 components and 0.518002 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1657+5705_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9397 x 1.314 at 2.97 degrees (North through East) ! Clean map min=-0.0010449 max=0.43549 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1657+5705_X_map.fits wmodel /vlbi/uf001/uva//J1657+5705_X_map.mod ! Writing 550 model components to file: /vlbi/uf001/uva//J1657+5705_X_map.mod wobs /vlbi/uf001/uva//J1657+5705_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1657+5705_X_uvs.fits wwins /vlbi/uf001/uva//J1657+5705_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J1657+5705_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.435489 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015881 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.109401 0.109401 0.218802 0.437604 0.875207 1.75041 3.50083 7.00166 14.0033 28.0066 56.0133 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.435 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2742.21 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1657+5705_X_dfm.log closed on Mon Jan 14 03:58:26 2019