! Started logfile: /vlbi/uf001/uvm//J1656-3302_X_a_dfm.log on Sun Jan 13 22:04:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1656-3302_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1656-3302_X_a_uvm.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! AN table 2: 49 integrations on 15 of 15 possible baselines. ! AN table 3: 49 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.834891 visibilities/baseline/integration-bin. ! Found source: J1656-3302 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38592 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1656-3302_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 103 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.029857Jy sigma=18.268356 ! Fit after self-cal, rms=0.799058Jy sigma=13.980878 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6573 mas, bmaj=1.742 mas, bpa=-8.028 degrees ! Estimated noise=0.494855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136367 Jy ! Component: 100 - total flux cleaned = 0.187831 Jy ! Total flux subtracted in 100 components = 0.187831 Jy ! Clean residual min=-0.011015 max=0.025918 Jy/beam ! Clean residual mean=-0.000024 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 0.187831 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.187831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110113Jy sigma=1.919506 ! Fit after self-cal, rms=0.109980Jy sigma=1.917416 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313979 Jy ! Component: 100 - total flux cleaned = 0.0510899 Jy ! Total flux subtracted in 100 components = 0.0510899 Jy ! Clean residual min=-0.008542 max=0.017668 Jy/beam ! Clean residual mean=-0.000017 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.238921 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.238921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093230Jy sigma=1.564361 ! Fit after self-cal, rms=0.093144Jy sigma=1.562728 ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185976 Jy ! Component: 100 - total flux cleaned = 0.0307248 Jy ! Total flux subtracted in 100 components = 0.0307248 Jy ! Clean residual min=-0.007799 max=0.011972 Jy/beam ! Clean residual mean=-0.000013 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.269646 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.269646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086779Jy sigma=1.440947 ! Fit after self-cal, rms=0.086329Jy sigma=1.432352 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9197 mas, bmaj=2.518 mas, bpa=-7.373 degrees ! Estimated noise=0.210299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169867 Jy ! Component: 100 - total flux cleaned = 0.0269731 Jy ! Component: 150 - total flux cleaned = 0.0331709 Jy ! Component: 200 - total flux cleaned = 0.0370668 Jy ! Total flux subtracted in 200 components = 0.0370668 Jy ! Clean residual min=-0.008860 max=0.011745 Jy/beam ! Clean residual mean=-0.000020 rms=0.002609 Jy/beam ! Combined flux in latest and established models = 0.306713 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.306713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082888Jy sigma=1.364507 ! Fit after self-cal, rms=0.082606Jy sigma=1.359078 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9197 x 2.518 at -7.373 degrees (North through East) ! Clean map min=-0.0085069 max=0.19096 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.05 KP 0.89 LA 0.89 ! MK 1.12 NL 1.04 OV 0.80 PT 0.83 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.34 KP 1.05 LA 1.09 ! NL 1.10 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 KP 1.04 LA 1.06 ! MK 0.91 NL 1.31 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.10 KP 0.89 LA 0.89 ! MK 1.16 NL 1.06 OV 0.80 PT 0.83 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.31 KP 1.05 LA 1.06 ! NL 1.10 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 KP 1.04 LA 1.06 ! MK 0.92 NL 1.30 OV 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.10 KP 0.87 LA 0.90 ! MK 1.16 NL 1.04 OV 0.80 PT 0.82 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.26 KP 1.05 LA 1.07 ! NL 1.11 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 KP 1.03 LA 1.06 ! MK 0.89 NL 1.32 OV 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.12 KP 0.87 LA 0.89 ! MK 1.17 NL 1.07 OV 0.83 PT 0.85 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.41 KP 1.06 LA 1.05 ! NL 1.12 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 KP 1.05 LA 1.05 ! MK 0.92 NL 1.30 OV 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.08 KP 0.89 LA 0.90 ! MK 1.15 NL 1.06 OV 0.82 PT 0.83 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.33 KP 1.06 LA 1.04 ! NL 1.11 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.04 KP 1.05 LA 1.04 ! MK 0.86 NL 1.28 OV 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.08 KP 0.89 LA 0.88 ! MK 1.17 NL 1.06 OV 0.82 PT 0.86 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.36 KP 1.03 LA 1.08 ! NL 1.09 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.03 KP 1.06 LA 1.07 ! MK 0.88 NL 1.30 OV 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.07 KP 0.88 LA 0.92 ! MK 1.17 NL 1.06 OV 0.84 PT 0.86 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.31 KP 1.08 LA 1.08 ! NL 1.08 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 1.06 LA 1.06 ! MK 0.86 NL 1.31 OV 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.10 KP 0.91 LA 0.91 ! MK 1.08 NL 1.08 OV 0.82 PT 0.87 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.36 KP 1.06 LA 1.05 ! NL 1.11 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.03 KP 1.07 LA 1.05 ! MK 0.89 NL 1.29 OV 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.05 KP 0.90 LA 0.91 ! MK 1.05 NL 1.05 OV 0.84 PT 0.88 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.42 KP 1.06 LA 1.07 ! NL 1.12 OV 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.05 KP 1.07 LA 1.08 ! MK 0.87 NL 1.30 OV 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.23 KP 0.91 LA 0.92 ! MK 1.10 NL 1.07 OV 0.83 PT 0.87 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.28 KP 1.06 LA 1.09 ! NL 1.09 OV 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.05 KP 1.08 LA 1.06 ! MK 0.83 NL 1.30 OV 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.04 KP 0.91 LA 0.93 ! MK 1.04 NL 1.05 OV 0.84 PT 0.88 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.24 KP 1.08 LA 1.09 ! NL 1.07 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.06 KP 1.06 LA 1.11 ! MK 0.86 NL 1.26 OV 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.04 KP 0.89 LA 0.93 ! MK 1.08 NL 1.08 OV 0.82 PT 0.85 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.27 KP 1.03 LA 1.09 ! NL 1.08 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.02 KP 1.09 LA 1.09 ! MK 0.93 NL 1.25 OV 0.95 ! ! ! Fit before self-cal, rms=0.082606Jy sigma=1.359078 ! Fit after self-cal, rms=0.079196Jy sigma=1.172395 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9268 mas, bmaj=2.521 mas, bpa=-6.925 degrees ! Estimated noise=0.211014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000990731 Jy ! Component: 100 - total flux cleaned = -0.00127357 Jy ! Component: 150 - total flux cleaned = -0.0014138 Jy ! Component: 200 - total flux cleaned = -0.00157946 Jy ! Total flux subtracted in 200 components = -0.00157946 Jy ! Clean residual min=-0.002913 max=0.002688 Jy/beam ! Clean residual mean=-0.000001 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.305133 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.305133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079118Jy sigma=1.170688 ! Fit after self-cal, rms=0.079307Jy sigma=1.169988 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079307Jy sigma=1.169988 ! Fit after self-cal, rms=0.079030Jy sigma=1.159678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.923 mas, bmaj=2.518 mas, bpa=-7.026 degrees ! Estimated noise=0.210352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209575 Jy ! Component: 100 - total flux cleaned = -0.000484581 Jy ! Component: 150 - total flux cleaned = -0.000641393 Jy ! Component: 200 - total flux cleaned = -0.000745034 Jy ! Total flux subtracted in 200 components = -0.000745034 Jy ! Clean residual min=-0.002257 max=0.002316 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.304388 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.304388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078980Jy sigma=1.158762 ! Fit after self-cal, rms=0.078988Jy sigma=1.158638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176285 Jy ! Component: 100 - total flux cleaned = 0.00211219 Jy ! Component: 150 - total flux cleaned = 0.00224317 Jy ! Component: 200 - total flux cleaned = 0.00236415 Jy ! Total flux subtracted in 200 components = 0.00236415 Jy ! Clean residual min=-0.001911 max=0.001704 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.306752 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.306752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078919Jy sigma=1.157145 ! Fit after self-cal, rms=0.078913Jy sigma=1.157082 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078913Jy sigma=1.157082 ! Fit after self-cal, rms=0.078817Jy sigma=1.156708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9202 mas, bmaj=2.511 mas, bpa=-7.018 degrees ! Estimated noise=0.209632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043293 Jy ! Component: 100 - total flux cleaned = 0.000508871 Jy ! Component: 150 - total flux cleaned = 0.000509008 Jy ! Component: 200 - total flux cleaned = 0.000542011 Jy ! Total flux subtracted in 200 components = 0.000542011 Jy ! Clean residual min=-0.001714 max=0.001673 Jy/beam ! Clean residual mean=0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.307294 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.307294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078780Jy sigma=1.156073 ! Fit after self-cal, rms=0.078781Jy sigma=1.156055 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139271 Jy ! Component: 100 - total flux cleaned = 0.000169604 Jy ! Component: 150 - total flux cleaned = 0.000169292 Jy ! Component: 200 - total flux cleaned = 0.000168128 Jy ! Total flux subtracted in 200 components = 0.000168128 Jy ! Clean residual min=-0.001664 max=0.001651 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.307463 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.307463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078755Jy sigma=1.155695 ! Fit after self-cal, rms=0.078754Jy sigma=1.155687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078754Jy sigma=1.155687 ! Fit after self-cal, rms=0.078689Jy sigma=1.155613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=6.426 mas, bpa=-2.006 degrees ! Estimated noise=0.253549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589372 Jy ! Component: 100 - total flux cleaned = 0.000679542 Jy ! Component: 150 - total flux cleaned = 0.00076251 Jy ! Component: 200 - total flux cleaned = 0.000838949 Jy ! Total flux subtracted in 200 components = 0.000838949 Jy ! Clean residual min=-0.001843 max=0.001282 Jy/beam ! Clean residual mean=0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.308302 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 105 components and 0.308302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078677Jy sigma=1.155575 ! Fit after self-cal, rms=0.078678Jy sigma=1.155558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177284 Jy ! Component: 100 - total flux cleaned = 0.000246272 Jy ! Component: 150 - total flux cleaned = 0.00027896 Jy ! Component: 200 - total flux cleaned = 0.000325967 Jy ! Total flux subtracted in 200 components = 0.000325967 Jy ! Clean residual min=-0.001829 max=0.001283 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.308628 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.308628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078670Jy sigma=1.155547 ! Fit after self-cal, rms=0.078670Jy sigma=1.155536 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9189 mas, bmaj=2.506 mas, bpa=-7.003 degrees ! Estimated noise=0.20921 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9189 x 2.506 at -7.003 degrees (North through East) ! Clean map min=-0.0018452 max=0.19064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6623 mas, bmaj=1.739 mas, bpa=-7.138 degrees ! Estimated noise=0.48775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133322 Jy ! Component: 100 - total flux cleaned = 0.185432 Jy ! Component: 150 - total flux cleaned = 0.217674 Jy ! Component: 200 - total flux cleaned = 0.2394 Jy ! Total flux subtracted in 200 components = 0.2394 Jy ! Clean residual min=-0.005192 max=0.011974 Jy/beam ! Clean residual mean=-0.000010 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.2394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.2394 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9189 mas, bmaj=2.506 mas, bpa=-7.003 degrees ! Estimated noise=0.20921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268248 Jy ! Component: 100 - total flux cleaned = 0.0408304 Jy ! Component: 150 - total flux cleaned = 0.0490816 Jy ! Component: 200 - total flux cleaned = 0.0540582 Jy ! Total flux subtracted in 200 components = 0.0540582 Jy ! Clean residual min=-0.002278 max=0.004017 Jy/beam ! Clean residual mean=-0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.293458 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 62 components and 0.293458 Jy ! Inverting map ! Added new window around map position (1, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383361 Jy ! Component: 100 - total flux cleaned = 0.0063196 Jy ! Component: 150 - total flux cleaned = 0.00821954 Jy ! Component: 200 - total flux cleaned = 0.00973069 Jy ! Total flux subtracted in 200 components = 0.00973069 Jy ! Clean residual min=-0.001642 max=0.001690 Jy/beam ! Clean residual mean=-0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.303189 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.303189 Jy ! Inverting map ! Added new window around map position (-2, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158826 Jy ! Component: 100 - total flux cleaned = 0.00231745 Jy ! Component: 150 - total flux cleaned = 0.00288418 Jy ! Component: 200 - total flux cleaned = 0.00332354 Jy ! Total flux subtracted in 200 components = 0.00332354 Jy ! Clean residual min=-0.001530 max=0.001282 Jy/beam ! Clean residual mean=-0.000000 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.306512 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.306512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=6.426 mas, bpa=-2.006 degrees ! Estimated noise=0.253549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011517 Jy ! Component: 100 - total flux cleaned = 0.00193476 Jy ! Component: 150 - total flux cleaned = 0.00233887 Jy ! Component: 200 - total flux cleaned = 0.0026261 Jy ! Total flux subtracted in 200 components = 0.0026261 Jy ! Clean residual min=-0.001528 max=0.001166 Jy/beam ! Clean residual mean=0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.309138 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.10375e-05 Jy ! Component: 100 - total flux cleaned = 0.000136063 Jy ! Component: 150 - total flux cleaned = 0.000167225 Jy ! Component: 200 - total flux cleaned = 0.00018207 Jy ! Total flux subtracted in 200 components = 0.00018207 Jy ! Clean residual min=-0.001531 max=0.001120 Jy/beam ! Clean residual mean=0.000000 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.309321 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.309321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9189 mas, bmaj=2.506 mas, bpa=-7.003 degrees ! Estimated noise=0.20921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014517 Jy ! Component: 100 - total flux cleaned = -0.000121385 Jy ! Component: 150 - total flux cleaned = -9.70122e-05 Jy ! Component: 200 - total flux cleaned = -7.41898e-05 Jy ! Total flux subtracted in 200 components = -7.41898e-05 Jy ! Clean residual min=-0.001368 max=0.001137 Jy/beam ! Clean residual mean=0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.309246 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.309246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078491Jy sigma=1.153148 ! Fit after self-cal, rms=0.078469Jy sigma=1.153012 wmodel J1656-3302_X_a_map.mod ! Writing 137 model components to file: J1656-3302_X_a_map.mod wobs J1656-3302_X_a_uvs.fits ! Writing UV FITS file: J1656-3302_X_a_uvs.fits wwins J1656-3302_X_a_map.win ! wwins: Wrote 5 windows to J1656-3302_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000619422 Jy ! Component: 100 - total flux cleaned = -0.000949482 Jy ! Component: 150 - total flux cleaned = -0.00123927 Jy ! Component: 200 - total flux cleaned = -0.00151628 Jy ! Component: 250 - total flux cleaned = -0.00174637 Jy ! Component: 300 - total flux cleaned = -0.00191416 Jy ! Component: 350 - total flux cleaned = -0.00209534 Jy ! Component: 400 - total flux cleaned = -0.00225413 Jy ! Component: 450 - total flux cleaned = -0.00235775 Jy ! Component: 500 - total flux cleaned = -0.00245934 Jy ! Component: 550 - total flux cleaned = -0.00259195 Jy ! Component: 600 - total flux cleaned = -0.00265692 Jy ! Component: 650 - total flux cleaned = -0.00275254 Jy ! Component: 700 - total flux cleaned = -0.00281483 Jy ! Component: 750 - total flux cleaned = -0.00286097 Jy ! Component: 800 - total flux cleaned = -0.0029212 Jy ! Component: 850 - total flux cleaned = -0.00292114 Jy ! Component: 900 - total flux cleaned = -0.00292123 Jy ! Component: 950 - total flux cleaned = -0.0029067 Jy ! Component: 1000 - total flux cleaned = -0.00282085 Jy ! Component: 1050 - total flux cleaned = -0.00276442 Jy ! Component: 1100 - total flux cleaned = -0.00276462 Jy ! Component: 1150 - total flux cleaned = -0.00272299 Jy ! Component: 1200 - total flux cleaned = -0.00266841 Jy ! Component: 1250 - total flux cleaned = -0.00260133 Jy ! Component: 1300 - total flux cleaned = -0.00257478 Jy ! Component: 1350 - total flux cleaned = -0.00260097 Jy ! Component: 1400 - total flux cleaned = -0.00249684 Jy ! Component: 1450 - total flux cleaned = -0.00244556 Jy ! Component: 1500 - total flux cleaned = -0.00239478 Jy ! Component: 1550 - total flux cleaned = -0.00233189 Jy ! Component: 1600 - total flux cleaned = -0.00233192 Jy ! Component: 1650 - total flux cleaned = -0.00225764 Jy ! Component: 1700 - total flux cleaned = -0.00218433 Jy ! Component: 1750 - total flux cleaned = -0.00218424 Jy ! Component: 1800 - total flux cleaned = -0.00210031 Jy ! Component: 1850 - total flux cleaned = -0.00207654 Jy ! Component: 1900 - total flux cleaned = -0.00205294 Jy ! Component: 1950 - total flux cleaned = -0.00198277 Jy ! Component: 2000 - total flux cleaned = -0.00191337 Jy ! Component: 2050 - total flux cleaned = -0.00190173 Jy ! Component: 2100 - total flux cleaned = -0.0018335 Jy ! Component: 2150 - total flux cleaned = -0.00179972 Jy ! Component: 2200 - total flux cleaned = -0.00175505 Jy ! Component: 2250 - total flux cleaned = -0.00172185 Jy ! Component: 2300 - total flux cleaned = -0.00167786 Jy ! Component: 2350 - total flux cleaned = -0.00165607 Jy ! Component: 2400 - total flux cleaned = -0.00162371 Jy ! Component: 2450 - total flux cleaned = -0.00163449 Jy ! Component: 2500 - total flux cleaned = -0.00164491 Jy ! Component: 2550 - total flux cleaned = -0.00160262 Jy ! Component: 2600 - total flux cleaned = -0.00157125 Jy ! Component: 2650 - total flux cleaned = -0.00162323 Jy ! Component: 2700 - total flux cleaned = -0.00157164 Jy ! Component: 2750 - total flux cleaned = -0.00156139 Jy ! Component: 2800 - total flux cleaned = -0.00156139 Jy ! Component: 2850 - total flux cleaned = -0.00153111 Jy ! Component: 2900 - total flux cleaned = -0.0015111 Jy ! Component: 2950 - total flux cleaned = -0.00152115 Jy ! Component: 3000 - total flux cleaned = -0.00148174 Jy ! Component: 3050 - total flux cleaned = -0.00144257 Jy ! Component: 3100 - total flux cleaned = -0.0014329 Jy ! Component: 3150 - total flux cleaned = -0.00143287 Jy ! Component: 3200 - total flux cleaned = -0.00144247 Jy ! Component: 3250 - total flux cleaned = -0.00142351 Jy ! Component: 3300 - total flux cleaned = -0.0014235 Jy ! Component: 3350 - total flux cleaned = -0.00145174 Jy ! Component: 3400 - total flux cleaned = -0.00140501 Jy ! Component: 3450 - total flux cleaned = -0.0014142 Jy ! Component: 3500 - total flux cleaned = -0.00135881 Jy ! Component: 3550 - total flux cleaned = -0.00133125 Jy ! Component: 3600 - total flux cleaned = -0.00130386 Jy ! Component: 3650 - total flux cleaned = -0.00130392 Jy ! Component: 3700 - total flux cleaned = -0.00126781 Jy ! Component: 3750 - total flux cleaned = -0.00123192 Jy ! Component: 3800 - total flux cleaned = -0.00125861 Jy ! Component: 3850 - total flux cleaned = -0.00124969 Jy ! Component: 3900 - total flux cleaned = -0.00119692 Jy ! Component: 3950 - total flux cleaned = -0.00118813 Jy ! Component: 4000 - total flux cleaned = -0.00116213 Jy ! Component: 4050 - total flux cleaned = -0.00117074 Jy ! Total flux subtracted in 4096 components = -0.00117073 Jy ! Clean residual min=-0.000490 max=0.000568 Jy/beam ! Clean residual mean=0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.308076 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 411 components and 0.308076 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1656-3302_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9189 x 2.506 at -7.003 degrees (North through East) ! Clean map min=-0.0012221 max=0.19413 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1656-3302_X_a_map.fits wmodel /vlbi/uf001/uvm//J1656-3302_X_a_map.mod ! Writing 411 model components to file: /vlbi/uf001/uvm//J1656-3302_X_a_map.mod wobs /vlbi/uf001/uvm//J1656-3302_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1656-3302_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1656-3302_X_a_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J1656-3302_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.194133 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153626 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237403 0.237403 0.474805 0.94961 1.89922 3.79844 7.59688 15.1938 30.3875 60.7751 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.194 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1263.68 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1656-3302_X_a_dfm.log closed on Sun Jan 13 22:04:08 2019