! Started logfile: /vlbi/uf001/uva//J1650+0824_S_dfm.log on Mon Jan 14 03:55:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1650+0824_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1650+0824_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857216 visibilities/baseline/integration-bin.
! Found source: J1650+0824
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10068 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1650+0824_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031773Jy  sigma=21.571092
! Fit after  self-cal, rms=0.812711Jy  sigma=16.978933
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.057 mas, bmaj=6.931 mas, bpa=-1.285 degrees
! Estimated noise=0.508143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.143052 Jy
! Component: 100  -  total flux cleaned = 0.176781 Jy
! Total flux subtracted in 100 components = 0.176781 Jy
! Clean residual min=-0.005242 max=0.013447 Jy/beam
! Clean residual mean=-0.000024 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.176781 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.176781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066973Jy  sigma=1.335040
! Fit after  self-cal, rms=0.066942Jy  sigma=1.334640
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147378 Jy
! Component: 100  -  total flux cleaned = 0.0223352 Jy
! Total flux subtracted in 100 components = 0.0223352 Jy
! Clean residual min=-0.004294 max=0.007027 Jy/beam
! Clean residual mean=-0.000012 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.199116 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.199116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062921Jy  sigma=1.246322
! Fit after  self-cal, rms=0.062887Jy  sigma=1.245760
! Inverting map 
! Added new window around map position (-4.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647522 Jy
! Component: 100  -  total flux cleaned = 0.0101418 Jy
! Total flux subtracted in 100 components = 0.0101418 Jy
! Clean residual min=-0.003524 max=0.003580 Jy/beam
! Clean residual mean=-0.000006 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.209258 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.209258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062041Jy  sigma=1.227091
! Fit after  self-cal, rms=0.061998Jy  sigma=1.226161
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=7.621 mas, bpa=0.1481 degrees
! Estimated noise=0.348958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421995 Jy
! Component: 100  -  total flux cleaned = 0.00677714 Jy
! Component: 150  -  total flux cleaned = 0.00857827 Jy
! Component: 200  -  total flux cleaned = 0.00990268 Jy
! Total flux subtracted in 200 components = 0.00990268 Jy
! Clean residual min=-0.002955 max=0.003031 Jy/beam
! Clean residual mean=-0.000002 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.219161 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 78 components and 0.219161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061677Jy  sigma=1.219052
! Fit after  self-cal, rms=0.061655Jy  sigma=1.218582
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.625 x 7.621 at 0.1481 degrees (North through East)
! Clean map  min=-0.0029674  max=0.18715 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.97     KP        1.02     
!   LA        0.93     MK        0.97     NL        1.04     OV        1.00     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.95     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.00     KP        1.02     
!   LA        0.95     MK        1.09     NL        1.06     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.061655Jy  sigma=1.218582
! Fit after  self-cal, rms=0.061099Jy  sigma=1.203909
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.634 mas, bmaj=7.662 mas, bpa=0.4151 degrees
! Estimated noise=0.348539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.19446e-05 Jy
! Component: 100  -  total flux cleaned = -0.00020377 Jy
! Component: 150  -  total flux cleaned = -0.000317889 Jy
! Component: 200  -  total flux cleaned = -0.00041545 Jy
! Total flux subtracted in 200 components = -0.00041545 Jy
! Clean residual min=-0.002501 max=0.002218 Jy/beam
! Clean residual mean=0.000000 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.218745 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.218745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061076Jy  sigma=1.203416
! Fit after  self-cal, rms=0.061085Jy  sigma=1.203301
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061085Jy  sigma=1.203301
! Fit after  self-cal, rms=0.060405Jy  sigma=1.191297
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.634 mas, bmaj=7.651 mas, bpa=0.3986 degrees
! Estimated noise=0.348187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000364833 Jy
! Component: 100  -  total flux cleaned = -0.000510864 Jy
! Component: 150  -  total flux cleaned = -0.000548589 Jy
! Component: 200  -  total flux cleaned = -0.000603715 Jy
! Total flux subtracted in 200 components = -0.000603715 Jy
! Clean residual min=-0.001824 max=0.001965 Jy/beam
! Clean residual mean=0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.218141 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.218141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060398Jy  sigma=1.191103
! Fit after  self-cal, rms=0.060391Jy  sigma=1.191018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126101 Jy
! Component: 100  -  total flux cleaned = 0.00153674 Jy
! Component: 150  -  total flux cleaned = 0.00156156 Jy
! Component: 200  -  total flux cleaned = 0.00152144 Jy
! Total flux subtracted in 200 components = 0.00152144 Jy
! Clean residual min=-0.001681 max=0.001603 Jy/beam
! Clean residual mean=0.000002 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.219663 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.219663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060348Jy  sigma=1.190035
! Fit after  self-cal, rms=0.060345Jy  sigma=1.189977
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060345Jy  sigma=1.189977
! Fit after  self-cal, rms=0.060314Jy  sigma=1.189720
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.635 mas, bmaj=7.652 mas, bpa=0.4416 degrees
! Estimated noise=0.347765 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103737 Jy
! Component: 100  -  total flux cleaned = 8.43675e-05 Jy
! Component: 150  -  total flux cleaned = 5.06262e-05 Jy
! Component: 200  -  total flux cleaned = 2.03453e-05 Jy
! Total flux subtracted in 200 components = 2.03453e-05 Jy
! Clean residual min=-0.001649 max=0.001497 Jy/beam
! Clean residual mean=0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.219683 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 151 components and 0.219683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060303Jy  sigma=1.189488
! Fit after  self-cal, rms=0.060302Jy  sigma=1.189475
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.89954e-05 Jy
! Component: 100  -  total flux cleaned = 5.4933e-05 Jy
! Component: 150  -  total flux cleaned = 6.83161e-05 Jy
! Component: 200  -  total flux cleaned = 6.8447e-05 Jy
! Total flux subtracted in 200 components = 6.8447e-05 Jy
! Clean residual min=-0.001611 max=0.001435 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.219752 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 161 components and 0.219752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060296Jy  sigma=1.189363
! Fit after  self-cal, rms=0.060296Jy  sigma=1.189360
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060296Jy  sigma=1.189360
! Fit after  self-cal, rms=0.060268Jy  sigma=1.189331
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.302 mas, bmaj=11.11 mas, bpa=-1.778 degrees
! Estimated noise=0.425123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000526399 Jy
! Component: 100  -  total flux cleaned = 0.000403241 Jy
! Component: 150  -  total flux cleaned = 0.000378428 Jy
! Component: 200  -  total flux cleaned = 0.000367748 Jy
! Total flux subtracted in 200 components = 0.000367748 Jy
! Clean residual min=-0.001517 max=0.002021 Jy/beam
! Clean residual mean=0.000002 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.220119 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 177 components and 0.220119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060266Jy  sigma=1.189426
! Fit after  self-cal, rms=0.060265Jy  sigma=1.189411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.5, -11.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172327 Jy
! Component: 100  -  total flux cleaned = 0.00266246 Jy
! Component: 150  -  total flux cleaned = 0.00307281 Jy
! Component: 200  -  total flux cleaned = 0.00335583 Jy
! Total flux subtracted in 200 components = 0.00335583 Jy
! Clean residual min=-0.001318 max=0.001519 Jy/beam
! Clean residual mean=0.000005 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.223475 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 224 components and 0.223475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060235Jy  sigma=1.188787
! Fit after  self-cal, rms=0.060232Jy  sigma=1.188739
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.637 mas, bmaj=7.655 mas, bpa=0.4696 degrees
! Estimated noise=0.347534 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.637 x 7.655 at 0.4696 degrees (North through East)
! Clean map  min=-0.0014551  max=0.18677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.071 mas, bmaj=6.947 mas, bpa=-0.9783 degrees
! Estimated noise=0.507497 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142772 Jy
! Component: 100  -  total flux cleaned = 0.176546 Jy
! Component: 150  -  total flux cleaned = 0.191477 Jy
! Component: 200  -  total flux cleaned = 0.199996 Jy
! Total flux subtracted in 200 components = 0.199996 Jy
! Clean residual min=-0.002603 max=0.004367 Jy/beam
! Clean residual mean=-0.000009 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.199996 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.199996 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.637 mas, bmaj=7.655 mas, bpa=0.4696 degrees
! Estimated noise=0.347534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00673828 Jy
! Component: 100  -  total flux cleaned = 0.0105687 Jy
! Component: 150  -  total flux cleaned = 0.0131048 Jy
! Component: 200  -  total flux cleaned = 0.0150054 Jy
! Total flux subtracted in 200 components = 0.0150054 Jy
! Clean residual min=-0.001690 max=0.001437 Jy/beam
! Clean residual mean=-0.000003 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.215001 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 67 components and 0.215001 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.302 mas, bmaj=11.11 mas, bpa=-1.778 degrees
! Estimated noise=0.425123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230183 Jy
! Component: 100  -  total flux cleaned = 0.00387269 Jy
! Component: 150  -  total flux cleaned = 0.00488209 Jy
! Component: 200  -  total flux cleaned = 0.00558302 Jy
! Total flux subtracted in 200 components = 0.00558302 Jy
! Clean residual min=-0.001416 max=0.001439 Jy/beam
! Clean residual mean=0.000000 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.220584 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598387 Jy
! Component: 100  -  total flux cleaned = 0.00111219 Jy
! Component: 150  -  total flux cleaned = 0.00155637 Jy
! Component: 200  -  total flux cleaned = 0.00194321 Jy
! Total flux subtracted in 200 components = 0.00194321 Jy
! Clean residual min=-0.001360 max=0.001471 Jy/beam
! Clean residual mean=0.000003 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.222528 Jy
! Adding 105 model components to the UV plane model.
! The established model now contains 164 components and 0.222528 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.637 mas, bmaj=7.655 mas, bpa=0.4696 degrees
! Estimated noise=0.347534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118362 Jy
! Component: 100  -  total flux cleaned = 0.000349632 Jy
! Component: 150  -  total flux cleaned = 0.000452049 Jy
! Component: 200  -  total flux cleaned = 0.000594823 Jy
! Total flux subtracted in 200 components = 0.000594823 Jy
! Clean residual min=-0.001415 max=0.001567 Jy/beam
! Clean residual mean=0.000002 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.223122 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 187 components and 0.223122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060217Jy  sigma=1.188361
! Fit after  self-cal, rms=0.060209Jy  sigma=1.188211
wmodel J1650+0824_S_map.mod
! Writing 187 model components to file: J1650+0824_S_map.mod
wobs   J1650+0824_S_uvs.fits
! Writing UV FITS file: J1650+0824_S_uvs.fits
wwins  J1650+0824_S_map.win
! wwins: Wrote 4 windows to J1650+0824_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.05838e-05 Jy
! Component: 100  -  total flux cleaned = -3.39421e-05 Jy
! Component: 150  -  total flux cleaned = -5.64072e-05 Jy
! Component: 200  -  total flux cleaned = 1.02742e-05 Jy
! Component: 250  -  total flux cleaned = 0.000117786 Jy
! Component: 300  -  total flux cleaned = 0.000201297 Jy
! Component: 350  -  total flux cleaned = 0.00026243 Jy
! Component: 400  -  total flux cleaned = 0.00030224 Jy
! Component: 450  -  total flux cleaned = 0.000360563 Jy
! Component: 500  -  total flux cleaned = 0.000398243 Jy
! Component: 550  -  total flux cleaned = 0.000435469 Jy
! Component: 600  -  total flux cleaned = 0.000545564 Jy
! Component: 650  -  total flux cleaned = 0.000653492 Jy
! Component: 700  -  total flux cleaned = 0.000724147 Jy
! Component: 750  -  total flux cleaned = 0.000828643 Jy
! Component: 800  -  total flux cleaned = 0.000896981 Jy
! Component: 850  -  total flux cleaned = 0.00101511 Jy
! Component: 900  -  total flux cleaned = 0.00111478 Jy
! Component: 950  -  total flux cleaned = 0.00117999 Jy
! Component: 1000  -  total flux cleaned = 0.00122838 Jy
! Component: 1050  -  total flux cleaned = 0.00129205 Jy
! Component: 1100  -  total flux cleaned = 0.0013866 Jy
! Component: 1150  -  total flux cleaned = 0.00144858 Jy
! Component: 1200  -  total flux cleaned = 0.00150973 Jy
! Component: 1250  -  total flux cleaned = 0.00160044 Jy
! Component: 1300  -  total flux cleaned = 0.0017051 Jy
! Component: 1350  -  total flux cleaned = 0.00177869 Jy
! Component: 1400  -  total flux cleaned = 0.00191028 Jy
! Component: 1450  -  total flux cleaned = 0.00201124 Jy
! Component: 1500  -  total flux cleaned = 0.00214 Jy
! Component: 1550  -  total flux cleaned = 0.00219652 Jy
! Component: 1600  -  total flux cleaned = 0.00228077 Jy
! Component: 1650  -  total flux cleaned = 0.00240539 Jy
! Component: 1700  -  total flux cleaned = 0.00244654 Jy
! Component: 1750  -  total flux cleaned = 0.00252812 Jy
! Component: 1800  -  total flux cleaned = 0.00262218 Jy
! Component: 1850  -  total flux cleaned = 0.002702 Jy
! Component: 1900  -  total flux cleaned = 0.00278121 Jy
! Component: 1950  -  total flux cleaned = 0.00289862 Jy
! Component: 2000  -  total flux cleaned = 0.0028988 Jy
! Component: 2050  -  total flux cleaned = 0.00303974 Jy
! Component: 2100  -  total flux cleaned = 0.00309059 Jy
! Component: 2150  -  total flux cleaned = 0.00319133 Jy
! Component: 2200  -  total flux cleaned = 0.00326591 Jy
! Component: 2250  -  total flux cleaned = 0.00327821 Jy
! Component: 2300  -  total flux cleaned = 0.00337647 Jy
! Component: 2350  -  total flux cleaned = 0.00348597 Jy
! Component: 2400  -  total flux cleaned = 0.0034979 Jy
! Component: 2450  -  total flux cleaned = 0.00354595 Jy
! Component: 2500  -  total flux cleaned = 0.00362899 Jy
! Component: 2550  -  total flux cleaned = 0.00367597 Jy
! Component: 2600  -  total flux cleaned = 0.00372274 Jy
! Component: 2650  -  total flux cleaned = 0.00379231 Jy
! Component: 2700  -  total flux cleaned = 0.00382688 Jy
! Component: 2750  -  total flux cleaned = 0.00392961 Jy
! Component: 2800  -  total flux cleaned = 0.00398623 Jy
! Component: 2850  -  total flux cleaned = 0.00403114 Jy
! Component: 2900  -  total flux cleaned = 0.00404244 Jy
! Component: 2950  -  total flux cleaned = 0.00407567 Jy
! Component: 3000  -  total flux cleaned = 0.00410863 Jy
! Component: 3050  -  total flux cleaned = 0.00417408 Jy
! Component: 3100  -  total flux cleaned = 0.00418491 Jy
! Component: 3150  -  total flux cleaned = 0.00422799 Jy
! Component: 3200  -  total flux cleaned = 0.00426001 Jy
! Component: 3250  -  total flux cleaned = 0.00430249 Jy
! Component: 3300  -  total flux cleaned = 0.00436585 Jy
! Component: 3350  -  total flux cleaned = 0.0043867 Jy
! Component: 3400  -  total flux cleaned = 0.0044596 Jy
! Component: 3450  -  total flux cleaned = 0.00445948 Jy
! Component: 3500  -  total flux cleaned = 0.00451089 Jy
! Component: 3550  -  total flux cleaned = 0.00455179 Jy
! Component: 3600  -  total flux cleaned = 0.00460244 Jy
! Component: 3650  -  total flux cleaned = 0.0046327 Jy
! Component: 3700  -  total flux cleaned = 0.00468271 Jy
! Component: 3750  -  total flux cleaned = 0.0046926 Jy
! Component: 3800  -  total flux cleaned = 0.00474204 Jy
! Component: 3850  -  total flux cleaned = 0.00480093 Jy
! Component: 3900  -  total flux cleaned = 0.00483017 Jy
! Component: 3950  -  total flux cleaned = 0.00483988 Jy
! Component: 4000  -  total flux cleaned = 0.00487835 Jy
! Component: 4050  -  total flux cleaned = 0.00486885 Jy
! Total flux subtracted in 4096 components = 0.00485929 Jy
! Clean residual min=-0.000610 max=0.000502 Jy/beam
! Clean residual mean=0.000002 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.227982 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 443 components and 0.227982 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1650+0824_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.637 x 7.655 at 0.4696 degrees (North through East)
! Clean map  min=-0.0013561  max=0.18687 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1650+0824_S_map.fits
wmodel /vlbi/uf001/uva//J1650+0824_S_map.mod
! Writing 443 model components to file: /vlbi/uf001/uva//J1650+0824_S_map.mod
wobs   /vlbi/uf001/uva//J1650+0824_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1650+0824_S_uvs.fits
wwins  /vlbi/uf001/uva//J1650+0824_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1650+0824_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.186866 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000171274 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.274968 0.274968 0.549935 1.09987 2.19974 4.39948 8.79896 17.5979 35.1958 70.3917
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.186 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1091.04 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1650+0824_S_dfm.log closed on Mon Jan 14 03:55:46 2019