! Started logfile: /vlbi/uf001/uva//J1648+2224_S_dfm.log on Mon Jan 14 03:54:15 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1648+2224_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1648+2224_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97599 visibilities/baseline/integration-bin.
! Found source: J1648+2224
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 11463 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1648+2224_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022595Jy  sigma=21.778516
! Fit after  self-cal, rms=0.773814Jy  sigma=16.630002
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=6.069 mas, bpa=-4.477 degrees
! Estimated noise=0.50048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165737 Jy
! Component: 100  -  total flux cleaned = 0.219438 Jy
! Total flux subtracted in 100 components = 0.219438 Jy
! Clean residual min=-0.010259 max=0.030741 Jy/beam
! Clean residual mean=-0.000084 rms=0.003010 Jy/beam
! Combined flux in latest and established models = 0.219438 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.219438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085211Jy  sigma=1.777930
! Fit after  self-cal, rms=0.084889Jy  sigma=1.771219
! Inverting map 
! Added new window around map position (4.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0321731 Jy
! Component: 100  -  total flux cleaned = 0.0514521 Jy
! Total flux subtracted in 100 components = 0.0514521 Jy
! Clean residual min=-0.006493 max=0.010423 Jy/beam
! Clean residual mean=-0.000051 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.27089 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 0.27089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066810Jy  sigma=1.384946
! Fit after  self-cal, rms=0.066061Jy  sigma=1.368494
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148857 Jy
! Component: 100  -  total flux cleaned = 0.0244512 Jy
! Total flux subtracted in 100 components = 0.0244512 Jy
! Clean residual min=-0.005220 max=0.005917 Jy/beam
! Clean residual mean=-0.000035 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.295341 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 43 components and 0.295341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061202Jy  sigma=1.263010
! Fit after  self-cal, rms=0.061000Jy  sigma=1.258495
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.539 mas, bmaj=6.719 mas, bpa=-3.178 degrees
! Estimated noise=0.31885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106388 Jy
! Component: 100  -  total flux cleaned = 0.0174294 Jy
! Component: 150  -  total flux cleaned = 0.0223093 Jy
! Component: 200  -  total flux cleaned = 0.0259162 Jy
! Total flux subtracted in 200 components = 0.0259162 Jy
! Clean residual min=-0.003893 max=0.004590 Jy/beam
! Clean residual mean=-0.000019 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.321258 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 83 components and 0.321258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058806Jy  sigma=1.209376
! Fit after  self-cal, rms=0.058718Jy  sigma=1.207276
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.539 x 6.719 at -3.178 degrees (North through East)
! Clean map  min=-0.0036361  max=0.21767 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.00     KP        1.00     
!   LA        0.93     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.00     KP        1.01     
!   LA        0.93     MK        1.05     NL        1.08     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.02     
!   LA        0.93     MK        1.02     NL        1.08     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.058718Jy  sigma=1.207276
! Fit after  self-cal, rms=0.057363Jy  sigma=1.173466
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.57 mas, bmaj=6.78 mas, bpa=-3.058 degrees
! Estimated noise=0.318878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113098 Jy
! Component: 100  -  total flux cleaned = -0.00120278 Jy
! Component: 150  -  total flux cleaned = -0.00120104 Jy
! Component: 200  -  total flux cleaned = -0.00124948 Jy
! Total flux subtracted in 200 components = -0.00124948 Jy
! Clean residual min=-0.001872 max=0.001935 Jy/beam
! Clean residual mean=-0.000000 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.320008 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.320008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057310Jy  sigma=1.172452
! Fit after  self-cal, rms=0.057310Jy  sigma=1.172095
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057310Jy  sigma=1.172095
! Fit after  self-cal, rms=0.057312Jy  sigma=1.163898
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.569 mas, bmaj=6.77 mas, bpa=-3.01 degrees
! Estimated noise=0.31854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.96806e-05 Jy
! Component: 100  -  total flux cleaned = 4.03454e-05 Jy
! Component: 150  -  total flux cleaned = -2.7446e-05 Jy
! Component: 200  -  total flux cleaned = -8.57737e-05 Jy
! Total flux subtracted in 200 components = -8.57737e-05 Jy
! Clean residual min=-0.001468 max=0.001313 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.319922 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.319922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057286Jy  sigma=1.163276
! Fit after  self-cal, rms=0.057283Jy  sigma=1.163082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.62362e-06 Jy
! Component: 100  -  total flux cleaned = -5.42096e-05 Jy
! Component: 150  -  total flux cleaned = -0.000105154 Jy
! Component: 200  -  total flux cleaned = -0.000152494 Jy
! Total flux subtracted in 200 components = -0.000152494 Jy
! Clean residual min=-0.001430 max=0.001282 Jy/beam
! Clean residual mean=-0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.31977 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.31977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057266Jy  sigma=1.162677
! Fit after  self-cal, rms=0.057260Jy  sigma=1.162556
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057260Jy  sigma=1.162556
! Fit after  self-cal, rms=0.057253Jy  sigma=1.162538
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.569 mas, bmaj=6.77 mas, bpa=-2.968 degrees
! Estimated noise=0.318436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001085 Jy
! Component: 100  -  total flux cleaned = -0.000142285 Jy
! Component: 150  -  total flux cleaned = -0.000189601 Jy
! Component: 200  -  total flux cleaned = -0.000246639 Jy
! Total flux subtracted in 200 components = -0.000246639 Jy
! Clean residual min=-0.001392 max=0.001305 Jy/beam
! Clean residual mean=-0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.319523 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.319523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057240Jy  sigma=1.162231
! Fit after  self-cal, rms=0.057235Jy  sigma=1.162140
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.63404e-05 Jy
! Component: 100  -  total flux cleaned = -3.15719e-05 Jy
! Component: 150  -  total flux cleaned = -8.38533e-05 Jy
! Component: 200  -  total flux cleaned = -0.000120016 Jy
! Total flux subtracted in 200 components = -0.000120016 Jy
! Clean residual min=-0.001373 max=0.001312 Jy/beam
! Clean residual mean=-0.000002 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.319403 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.319403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057226Jy  sigma=1.161919
! Fit after  self-cal, rms=0.057223Jy  sigma=1.161856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057223Jy  sigma=1.161856
! Fit after  self-cal, rms=0.057235Jy  sigma=1.161836
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.465 mas, bmaj=10.19 mas, bpa=-1.808 degrees
! Estimated noise=0.398082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000480842 Jy
! Component: 100  -  total flux cleaned = -0.000465506 Jy
! Component: 150  -  total flux cleaned = -0.000448674 Jy
! Component: 200  -  total flux cleaned = -0.000442795 Jy
! Total flux subtracted in 200 components = -0.000442795 Jy
! Clean residual min=-0.001293 max=0.001351 Jy/beam
! Clean residual mean=-0.000005 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.31896 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 124 components and 0.31896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057231Jy  sigma=1.161782
! Fit after  self-cal, rms=0.057228Jy  sigma=1.161729
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.56863e-05 Jy
! Component: 100  -  total flux cleaned = -2.57078e-05 Jy
! Component: 150  -  total flux cleaned = -2.60381e-05 Jy
! Component: 200  -  total flux cleaned = -2.01838e-05 Jy
! Total flux subtracted in 200 components = -2.01838e-05 Jy
! Clean residual min=-0.001284 max=0.001351 Jy/beam
! Clean residual mean=-0.000005 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.31894 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 129 components and 0.31894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057227Jy  sigma=1.161682
! Fit after  self-cal, rms=0.057225Jy  sigma=1.161653
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.57 mas, bmaj=6.771 mas, bpa=-2.914 degrees
! Estimated noise=0.318463 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.57 x 6.771 at -2.914 degrees (North through East)
! Clean map  min=-0.0012966  max=0.21659 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=6.103 mas, bpa=-4.188 degrees
! Estimated noise=0.501871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165616 Jy
! Component: 100  -  total flux cleaned = 0.223426 Jy
! Component: 150  -  total flux cleaned = 0.255822 Jy
! Component: 200  -  total flux cleaned = 0.275606 Jy
! Total flux subtracted in 200 components = 0.275606 Jy
! Clean residual min=-0.004114 max=0.010287 Jy/beam
! Clean residual mean=-0.000030 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.275606 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.275606 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.57 mas, bmaj=6.771 mas, bpa=-2.914 degrees
! Estimated noise=0.318463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161253 Jy
! Component: 100  -  total flux cleaned = 0.0253829 Jy
! Component: 150  -  total flux cleaned = 0.0309667 Jy
! Component: 200  -  total flux cleaned = 0.0345642 Jy
! Total flux subtracted in 200 components = 0.0345642 Jy
! Clean residual min=-0.001595 max=0.002248 Jy/beam
! Clean residual mean=-0.000009 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.310171 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 70 components and 0.310171 Jy
! Inverting map 
! Added new window around map position (8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261725 Jy
! Component: 100  -  total flux cleaned = 0.0044829 Jy
! Component: 150  -  total flux cleaned = 0.00585049 Jy
! Component: 200  -  total flux cleaned = 0.00686325 Jy
! Total flux subtracted in 200 components = 0.00686325 Jy
! Clean residual min=-0.001445 max=0.001368 Jy/beam
! Clean residual mean=-0.000004 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.317034 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 99 components and 0.317034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.465 mas, bmaj=10.19 mas, bpa=-1.808 degrees
! Estimated noise=0.398082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962501 Jy
! Component: 100  -  total flux cleaned = 0.00150461 Jy
! Component: 150  -  total flux cleaned = 0.00184499 Jy
! Component: 200  -  total flux cleaned = 0.00202861 Jy
! Total flux subtracted in 200 components = 0.00202861 Jy
! Clean residual min=-0.001310 max=0.001373 Jy/beam
! Clean residual mean=-0.000005 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.319062 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.86767e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129366 Jy
! Component: 150  -  total flux cleaned = 0.000150449 Jy
! Component: 200  -  total flux cleaned = 0.000165452 Jy
! Total flux subtracted in 200 components = 0.000165452 Jy
! Clean residual min=-0.001302 max=0.001383 Jy/beam
! Clean residual mean=-0.000005 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.319228 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 147 components and 0.319228 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.57 mas, bmaj=6.771 mas, bpa=-2.914 degrees
! Estimated noise=0.318463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369814 Jy
! Component: 100  -  total flux cleaned = -0.000369727 Jy
! Component: 150  -  total flux cleaned = -0.000351661 Jy
! Component: 200  -  total flux cleaned = -0.000318413 Jy
! Total flux subtracted in 200 components = -0.000318413 Jy
! Clean residual min=-0.001361 max=0.001395 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.318909 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 161 components and 0.318909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057222Jy  sigma=1.161430
! Fit after  self-cal, rms=0.057218Jy  sigma=1.161349
wmodel J1648+2224_S_map.mod
! Writing 161 model components to file: J1648+2224_S_map.mod
wobs   J1648+2224_S_uvs.fits
! Writing UV FITS file: J1648+2224_S_uvs.fits
wwins  J1648+2224_S_map.win
! wwins: Wrote 3 windows to J1648+2224_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.41422e-05 Jy
! Component: 100  -  total flux cleaned = -0.000254736 Jy
! Component: 150  -  total flux cleaned = -0.000516199 Jy
! Component: 200  -  total flux cleaned = -0.000663588 Jy
! Component: 250  -  total flux cleaned = -0.000787084 Jy
! Component: 300  -  total flux cleaned = -0.000887905 Jy
! Component: 350  -  total flux cleaned = -0.000967168 Jy
! Component: 400  -  total flux cleaned = -0.00104514 Jy
! Component: 450  -  total flux cleaned = -0.0011216 Jy
! Component: 500  -  total flux cleaned = -0.00121549 Jy
! Component: 550  -  total flux cleaned = -0.00128908 Jy
! Component: 600  -  total flux cleaned = -0.0013799 Jy
! Component: 650  -  total flux cleaned = -0.00141578 Jy
! Component: 700  -  total flux cleaned = -0.00146882 Jy
! Component: 750  -  total flux cleaned = -0.00152065 Jy
! Component: 800  -  total flux cleaned = -0.00157218 Jy
! Component: 850  -  total flux cleaned = -0.00165641 Jy
! Component: 900  -  total flux cleaned = -0.00168954 Jy
! Component: 950  -  total flux cleaned = -0.00170604 Jy
! Component: 1000  -  total flux cleaned = -0.00173865 Jy
! Component: 1050  -  total flux cleaned = -0.00178685 Jy
! Component: 1100  -  total flux cleaned = -0.00180284 Jy
! Component: 1150  -  total flux cleaned = -0.00183411 Jy
! Component: 1200  -  total flux cleaned = -0.0018651 Jy
! Component: 1250  -  total flux cleaned = -0.00189599 Jy
! Component: 1300  -  total flux cleaned = -0.00191105 Jy
! Component: 1350  -  total flux cleaned = -0.00191092 Jy
! Component: 1400  -  total flux cleaned = -0.0019259 Jy
! Component: 1450  -  total flux cleaned = -0.00195513 Jy
! Component: 1500  -  total flux cleaned = -0.00192588 Jy
! Component: 1550  -  total flux cleaned = -0.00196944 Jy
! Component: 1600  -  total flux cleaned = -0.00199803 Jy
! Component: 1650  -  total flux cleaned = -0.00202629 Jy
! Component: 1700  -  total flux cleaned = -0.00202622 Jy
! Component: 1750  -  total flux cleaned = -0.00208169 Jy
! Component: 1800  -  total flux cleaned = -0.00208146 Jy
! Component: 1850  -  total flux cleaned = -0.00206778 Jy
! Component: 1900  -  total flux cleaned = -0.00206791 Jy
! Component: 1950  -  total flux cleaned = -0.00209472 Jy
! Component: 2000  -  total flux cleaned = -0.00212121 Jy
! Component: 2050  -  total flux cleaned = -0.00212134 Jy
! Component: 2100  -  total flux cleaned = -0.00212123 Jy
! Component: 2150  -  total flux cleaned = -0.00218562 Jy
! Component: 2200  -  total flux cleaned = -0.0021213 Jy
! Component: 2250  -  total flux cleaned = -0.00212124 Jy
! Component: 2300  -  total flux cleaned = -0.00212119 Jy
! Component: 2350  -  total flux cleaned = -0.00207102 Jy
! Component: 2400  -  total flux cleaned = -0.00207111 Jy
! Component: 2450  -  total flux cleaned = -0.00208351 Jy
! Component: 2500  -  total flux cleaned = -0.00213249 Jy
! Component: 2550  -  total flux cleaned = -0.00214458 Jy
! Component: 2600  -  total flux cleaned = -0.00213241 Jy
! Component: 2650  -  total flux cleaned = -0.00213241 Jy
! Component: 2700  -  total flux cleaned = -0.00214441 Jy
! Component: 2750  -  total flux cleaned = -0.00215623 Jy
! Component: 2800  -  total flux cleaned = -0.00220304 Jy
! Component: 2850  -  total flux cleaned = -0.00217983 Jy
! Component: 2900  -  total flux cleaned = -0.00217976 Jy
! Component: 2950  -  total flux cleaned = -0.00221418 Jy
! Component: 3000  -  total flux cleaned = -0.00222547 Jy
! Component: 3050  -  total flux cleaned = -0.00221425 Jy
! Component: 3100  -  total flux cleaned = -0.00223658 Jy
! Component: 3150  -  total flux cleaned = -0.00224781 Jy
! Component: 3200  -  total flux cleaned = -0.00224781 Jy
! Component: 3250  -  total flux cleaned = -0.00230304 Jy
! Component: 3300  -  total flux cleaned = -0.00232489 Jy
! Component: 3350  -  total flux cleaned = -0.00234672 Jy
! Component: 3400  -  total flux cleaned = -0.00239017 Jy
! Component: 3450  -  total flux cleaned = -0.00241176 Jy
! Component: 3500  -  total flux cleaned = -0.00242258 Jy
! Component: 3550  -  total flux cleaned = -0.0023906 Jy
! Component: 3600  -  total flux cleaned = -0.00243297 Jy
! Component: 3650  -  total flux cleaned = -0.00243295 Jy
! Component: 3700  -  total flux cleaned = -0.00242248 Jy
! Component: 3750  -  total flux cleaned = -0.00243297 Jy
! Component: 3800  -  total flux cleaned = -0.00250519 Jy
! Component: 3850  -  total flux cleaned = -0.00248461 Jy
! Component: 3900  -  total flux cleaned = -0.00249487 Jy
! Component: 3950  -  total flux cleaned = -0.00251518 Jy
! Component: 4000  -  total flux cleaned = -0.00254546 Jy
! Component: 4050  -  total flux cleaned = -0.0025855 Jy
! Total flux subtracted in 4096 components = -0.00256551 Jy
! Clean residual min=-0.000600 max=0.000689 Jy/beam
! Clean residual mean=-0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.316344 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 458 components and 0.316344 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1648+2224_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.57 x 6.771 at -2.914 degrees (North through East)
! Clean map  min=-0.0010987  max=0.21708 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1648+2224_S_map.fits
wmodel /vlbi/uf001/uva//J1648+2224_S_map.mod
! Writing 458 model components to file: /vlbi/uf001/uva//J1648+2224_S_map.mod
wobs   /vlbi/uf001/uva//J1648+2224_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1648+2224_S_uvs.fits
wwins  /vlbi/uf001/uva//J1648+2224_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1648+2224_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217076 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181598 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.250969 0.250969 0.501938 1.00388 2.00775 4.01551 8.03101 16.062 32.1241 64.2481
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1195.36 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1648+2224_S_dfm.log closed on Mon Jan 14 03:54:19 2019