! Started logfile: /vlbi/uf001/uva//J1647-1926_S_dfm.log on Mon Jan 14 03:53:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1647-1926_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1647-1926_S_uva.fits
! AN table 1: 83 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.995984 visibilities/baseline/integration-bin.
! Found source: J1647-1926
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1647-1926_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017022Jy  sigma=17.857631
! Fit after  self-cal, rms=0.868900Jy  sigma=15.190398
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.219 mas, bmaj=29.39 mas, bpa=-6.3 degrees
! Estimated noise=0.941595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101675 Jy
! Component: 100  -  total flux cleaned = 0.132359 Jy
! Total flux subtracted in 100 components = 0.132359 Jy
! Clean residual min=-0.008344 max=0.014433 Jy/beam
! Clean residual mean=-0.000023 rms=0.003056 Jy/beam
! Combined flux in latest and established models = 0.132359 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.132359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076914Jy  sigma=1.306431
! Fit after  self-cal, rms=0.076483Jy  sigma=1.299534
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.962 mas, bmaj=29.95 mas, bpa=-6.084 degrees
! Estimated noise=0.576784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204621 Jy
! Component: 100  -  total flux cleaned = 0.0306316 Jy
! Component: 150  -  total flux cleaned = 0.0362624 Jy
! Component: 200  -  total flux cleaned = 0.0396129 Jy
! Total flux subtracted in 200 components = 0.0396129 Jy
! Clean residual min=-0.004443 max=0.003739 Jy/beam
! Clean residual mean=-0.000001 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.171972 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 79 components and 0.171972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071653Jy  sigma=1.197004
! Fit after  self-cal, rms=0.071515Jy  sigma=1.194393
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.962 x 29.95 at -6.084 degrees (North through East)
! Clean map  min=-0.0047506  max=0.12994 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.03     KP        1.01     LA        0.95     
!   NL        1.01     OV        0.96     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.08     KP        0.99     LA        0.95     
!   NL        1.02     OV        0.92     PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.07     KP        0.99     LA        0.99     
!   NL        1.03     OV        0.98     PT        1.03     
! 
! 
! Fit before self-cal, rms=0.071515Jy  sigma=1.194393
! Fit after  self-cal, rms=0.071618Jy  sigma=1.186460
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.043 mas, bmaj=29.85 mas, bpa=-5.944 degrees
! Estimated noise=0.573292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000556711 Jy
! Component: 100  -  total flux cleaned = -0.000382585 Jy
! Component: 150  -  total flux cleaned = -6.82535e-05 Jy
! Component: 200  -  total flux cleaned = 8.37944e-05 Jy
! Total flux subtracted in 200 components = 8.37944e-05 Jy
! Clean residual min=-0.003041 max=0.002629 Jy/beam
! Clean residual mean=0.000002 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.172056 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.172056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071505Jy  sigma=1.184513
! Fit after  self-cal, rms=0.071509Jy  sigma=1.183840
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071509Jy  sigma=1.183840
! Fit after  self-cal, rms=0.072251Jy  sigma=1.179110
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.039 mas, bmaj=29.77 mas, bpa=-6.112 degrees
! Estimated noise=0.573823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176708 Jy
! Component: 100  -  total flux cleaned = -5.76479e-05 Jy
! Component: 150  -  total flux cleaned = -0.000220047 Jy
! Component: 200  -  total flux cleaned = -0.000270565 Jy
! Total flux subtracted in 200 components = -0.000270565 Jy
! Clean residual min=-0.002004 max=0.002130 Jy/beam
! Clean residual mean=0.000004 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.171785 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.171785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072190Jy  sigma=1.178061
! Fit after  self-cal, rms=0.072187Jy  sigma=1.177656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014 Jy
! Component: 100  -  total flux cleaned = -0.000196104 Jy
! Component: 150  -  total flux cleaned = -0.000277713 Jy
! Component: 200  -  total flux cleaned = -0.000279092 Jy
! Total flux subtracted in 200 components = -0.000279092 Jy
! Clean residual min=-0.001866 max=0.001965 Jy/beam
! Clean residual mean=0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.171506 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 149 components and 0.171506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072164Jy  sigma=1.177194
! Fit after  self-cal, rms=0.072149Jy  sigma=1.176992
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072149Jy  sigma=1.176992
! Fit after  self-cal, rms=0.072578Jy  sigma=1.176724
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.036 mas, bmaj=29.75 mas, bpa=-6.194 degrees
! Estimated noise=0.573786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.96395e-05 Jy
! Component: 100  -  total flux cleaned = -0.000214996 Jy
! Component: 150  -  total flux cleaned = -0.000366937 Jy
! Component: 200  -  total flux cleaned = -0.000432297 Jy
! Total flux subtracted in 200 components = -0.000432297 Jy
! Clean residual min=-0.001789 max=0.001882 Jy/beam
! Clean residual mean=0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.171074 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 163 components and 0.171074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072558Jy  sigma=1.176356
! Fit after  self-cal, rms=0.072558Jy  sigma=1.176219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.56481e-05 Jy
! Component: 100  -  total flux cleaned = -0.000128768 Jy
! Component: 150  -  total flux cleaned = -0.000189088 Jy
! Component: 200  -  total flux cleaned = -0.00018937 Jy
! Total flux subtracted in 200 components = -0.00018937 Jy
! Clean residual min=-0.001730 max=0.001812 Jy/beam
! Clean residual mean=0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.170884 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 183 components and 0.170884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072549Jy  sigma=1.176042
! Fit after  self-cal, rms=0.072544Jy  sigma=1.175965
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072544Jy  sigma=1.175965
! Fit after  self-cal, rms=0.072739Jy  sigma=1.175920
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.344 mas, bmaj=30.49 mas, bpa=-5.039 degrees
! Estimated noise=0.599071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159913 Jy
! Component: 100  -  total flux cleaned = -0.000228077 Jy
! Component: 150  -  total flux cleaned = -0.000326583 Jy
! Component: 200  -  total flux cleaned = -0.000364894 Jy
! Total flux subtracted in 200 components = -0.000364894 Jy
! Clean residual min=-0.001592 max=0.001552 Jy/beam
! Clean residual mean=0.000001 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.170519 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 220 components and 0.170519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072733Jy  sigma=1.175797
! Fit after  self-cal, rms=0.072731Jy  sigma=1.175742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.58873e-05 Jy
! Component: 100  -  total flux cleaned = -3.67902e-05 Jy
! Component: 150  -  total flux cleaned = -5.67948e-05 Jy
! Component: 200  -  total flux cleaned = -7.24475e-05 Jy
! Total flux subtracted in 200 components = -7.24475e-05 Jy
! Clean residual min=-0.001555 max=0.001509 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.170447 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 235 components and 0.170447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072728Jy  sigma=1.175668
! Fit after  self-cal, rms=0.072725Jy  sigma=1.175634
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.034 mas, bmaj=29.76 mas, bpa=-6.233 degrees
! Estimated noise=0.57393 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.034 x 29.76 at -6.233 degrees (North through East)
! Clean map  min=-0.0016298  max=0.12841 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.274 mas, bmaj=29.29 mas, bpa=-6.452 degrees
! Estimated noise=0.945685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101776 Jy
! Component: 100  -  total flux cleaned = 0.135752 Jy
! Component: 150  -  total flux cleaned = 0.150869 Jy
! Component: 200  -  total flux cleaned = 0.158952 Jy
! Total flux subtracted in 200 components = 0.158952 Jy
! Clean residual min=-0.003820 max=0.004348 Jy/beam
! Clean residual mean=-0.000006 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.158952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.158952 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.034 mas, bmaj=29.76 mas, bpa=-6.233 degrees
! Estimated noise=0.57393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055821 Jy
! Component: 100  -  total flux cleaned = 0.00838323 Jy
! Component: 150  -  total flux cleaned = 0.00933238 Jy
! Component: 200  -  total flux cleaned = 0.00977044 Jy
! Total flux subtracted in 200 components = 0.00977044 Jy
! Clean residual min=-0.002087 max=0.002249 Jy/beam
! Clean residual mean=-0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.168722 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 97 components and 0.168722 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.344 mas, bmaj=30.49 mas, bpa=-5.039 degrees
! Estimated noise=0.599071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067441 Jy
! Component: 100  -  total flux cleaned = 0.000708633 Jy
! Component: 150  -  total flux cleaned = 0.000667246 Jy
! Component: 200  -  total flux cleaned = 0.00062864 Jy
! Total flux subtracted in 200 components = 0.00062864 Jy
! Clean residual min=-0.001715 max=0.001600 Jy/beam
! Clean residual mean=-0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.169351 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.46424e-05 Jy
! Component: 100  -  total flux cleaned = -4.97366e-05 Jy
! Component: 150  -  total flux cleaned = -7.98059e-05 Jy
! Component: 200  -  total flux cleaned = -5.19694e-05 Jy
! Total flux subtracted in 200 components = -5.19694e-05 Jy
! Clean residual min=-0.001704 max=0.001558 Jy/beam
! Clean residual mean=-0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.169299 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 135 components and 0.169299 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.034 mas, bmaj=29.76 mas, bpa=-6.233 degrees
! Estimated noise=0.57393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157517 Jy
! Component: 100  -  total flux cleaned = -0.000248502 Jy
! Component: 150  -  total flux cleaned = -0.000301393 Jy
! Component: 200  -  total flux cleaned = -0.000346728 Jy
! Total flux subtracted in 200 components = -0.000346728 Jy
! Clean residual min=-0.001939 max=0.001878 Jy/beam
! Clean residual mean=-0.000001 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.168952 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 153 components and 0.168952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072765Jy  sigma=1.176056
! Fit after  self-cal, rms=0.072754Jy  sigma=1.175905
wmodel J1647-1926_S_map.mod
! Writing 153 model components to file: J1647-1926_S_map.mod
wobs   J1647-1926_S_uvs.fits
! Writing UV FITS file: J1647-1926_S_uvs.fits
wwins  J1647-1926_S_map.win
! wwins: Wrote 1 windows to J1647-1926_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.78334e-05 Jy
! Component: 100  -  total flux cleaned = -0.00015516 Jy
! Component: 150  -  total flux cleaned = -0.000128672 Jy
! Component: 200  -  total flux cleaned = -0.000128978 Jy
! Component: 250  -  total flux cleaned = 3.58607e-05 Jy
! Component: 300  -  total flux cleaned = 0.000102595 Jy
! Component: 350  -  total flux cleaned = 0.000146452 Jy
! Component: 400  -  total flux cleaned = 0.000189331 Jy
! Component: 450  -  total flux cleaned = 0.000310841 Jy
! Component: 500  -  total flux cleaned = 0.000408272 Jy
! Component: 550  -  total flux cleaned = 0.000503206 Jy
! Component: 600  -  total flux cleaned = 0.00055855 Jy
! Component: 650  -  total flux cleaned = 0.000558264 Jy
! Component: 700  -  total flux cleaned = 0.000575967 Jy
! Component: 750  -  total flux cleaned = 0.000609922 Jy
! Component: 800  -  total flux cleaned = 0.000576604 Jy
! Component: 850  -  total flux cleaned = 0.000609533 Jy
! Component: 900  -  total flux cleaned = 0.000641323 Jy
! Component: 950  -  total flux cleaned = 0.000703679 Jy
! Component: 1000  -  total flux cleaned = 0.000733733 Jy
! Component: 1050  -  total flux cleaned = 0.000748546 Jy
! Component: 1100  -  total flux cleaned = 0.000777753 Jy
! Component: 1150  -  total flux cleaned = 0.000763395 Jy
! Component: 1200  -  total flux cleaned = 0.00080559 Jy
! Component: 1250  -  total flux cleaned = 0.000874518 Jy
! Component: 1300  -  total flux cleaned = 0.000955914 Jy
! Component: 1350  -  total flux cleaned = 0.00103591 Jy
! Component: 1400  -  total flux cleaned = 0.00110168 Jy
! Component: 1450  -  total flux cleaned = 0.00123072 Jy
! Component: 1500  -  total flux cleaned = 0.00131953 Jy
! Component: 1550  -  total flux cleaned = 0.00140699 Jy
! Component: 1600  -  total flux cleaned = 0.00149317 Jy
! Component: 1650  -  total flux cleaned = 0.00154184 Jy
! Component: 1700  -  total flux cleaned = 0.00161382 Jy
! Component: 1750  -  total flux cleaned = 0.00171998 Jy
! Component: 1800  -  total flux cleaned = 0.00177816 Jy
! Component: 1850  -  total flux cleaned = 0.00183579 Jy
! Component: 1900  -  total flux cleaned = 0.00193812 Jy
! Component: 1950  -  total flux cleaned = 0.00202771 Jy
! Component: 2000  -  total flux cleaned = 0.00207203 Jy
! Component: 2050  -  total flux cleaned = 0.0021049 Jy
! Component: 2100  -  total flux cleaned = 0.00220235 Jy
! Component: 2150  -  total flux cleaned = 0.00226659 Jy
! Component: 2200  -  total flux cleaned = 0.00230886 Jy
! Component: 2250  -  total flux cleaned = 0.00237171 Jy
! Component: 2300  -  total flux cleaned = 0.00242349 Jy
! Component: 2350  -  total flux cleaned = 0.00248509 Jy
! Component: 2400  -  total flux cleaned = 0.00254599 Jy
! Component: 2450  -  total flux cleaned = 0.0026063 Jy
! Component: 2500  -  total flux cleaned = 0.0026462 Jy
! Component: 2550  -  total flux cleaned = 0.00267591 Jy
! Component: 2600  -  total flux cleaned = 0.00272493 Jy
! Component: 2650  -  total flux cleaned = 0.00276382 Jy
! Component: 2700  -  total flux cleaned = 0.00281208 Jy
! Component: 2750  -  total flux cleaned = 0.00284082 Jy
! Component: 2800  -  total flux cleaned = 0.00288834 Jy
! Component: 2850  -  total flux cleaned = 0.00292611 Jy
! Component: 2900  -  total flux cleaned = 0.00296367 Jy
! Component: 2950  -  total flux cleaned = 0.00299162 Jy
! Component: 3000  -  total flux cleaned = 0.00301955 Jy
! Component: 3050  -  total flux cleaned = 0.00307498 Jy
! Component: 3100  -  total flux cleaned = 0.00311176 Jy
! Component: 3150  -  total flux cleaned = 0.00315767 Jy
! Component: 3200  -  total flux cleaned = 0.00321238 Jy
! Component: 3250  -  total flux cleaned = 0.00324861 Jy
! Component: 3300  -  total flux cleaned = 0.0032847 Jy
! Component: 3350  -  total flux cleaned = 0.00334768 Jy
! Component: 3400  -  total flux cleaned = 0.00338357 Jy
! Component: 3450  -  total flux cleaned = 0.00341035 Jy
! Component: 3500  -  total flux cleaned = 0.00346373 Jy
! Component: 3550  -  total flux cleaned = 0.0034814 Jy
! Component: 3600  -  total flux cleaned = 0.00349915 Jy
! Component: 3650  -  total flux cleaned = 0.00356091 Jy
! Component: 3700  -  total flux cleaned = 0.00361363 Jy
! Component: 3750  -  total flux cleaned = 0.0036838 Jy
! Component: 3800  -  total flux cleaned = 0.00372762 Jy
! Component: 3850  -  total flux cleaned = 0.00378894 Jy
! Component: 3900  -  total flux cleaned = 0.00384146 Jy
! Component: 3950  -  total flux cleaned = 0.00389391 Jy
! Component: 4000  -  total flux cleaned = 0.00394632 Jy
! Component: 4050  -  total flux cleaned = 0.00398126 Jy
! Total flux subtracted in 4096 components = 0.0040424 Jy
! Clean residual min=-0.000505 max=0.000468 Jy/beam
! Clean residual mean=0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.172994 Jy
keep
! Adding 376 model components to the UV plane model.
! The established model now contains 529 components and 0.172994 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1647-1926_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.034 x 29.76 at -6.233 degrees (North through East)
! Clean map  min=-0.0013205  max=0.12829 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1647-1926_S_map.fits
wmodel /vlbi/uf001/uva//J1647-1926_S_map.mod
! Writing 529 model components to file: /vlbi/uf001/uva//J1647-1926_S_map.mod
wobs   /vlbi/uf001/uva//J1647-1926_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1647-1926_S_uvs.fits
wwins  /vlbi/uf001/uva//J1647-1926_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1647-1926_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.128289 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000170616 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.398983 0.398983 0.797966 1.59593 3.19186 6.38373 12.7675 25.5349 51.0698
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.128 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  751.912 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1647-1926_S_dfm.log closed on Mon Jan 14 03:53:32 2019