! Started logfile: /vlbi/uf001/uva//J1645+6330_X_dfm.log on Mon Jan 14 03:52:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1645+6330_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1645+6330_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1645+6330 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23940 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1645+6330_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.160275Jy sigma=22.432160 ! Fit after self-cal, rms=0.431685Jy sigma=8.341414 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7609 mas, bmaj=0.8538 mas, bpa=33.83 degrees ! Estimated noise=0.511405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438154 Jy ! Component: 100 - total flux cleaned = 0.534784 Jy ! Total flux subtracted in 100 components = 0.534784 Jy ! Clean residual min=-0.018007 max=0.031110 Jy/beam ! Clean residual mean=-0.000012 rms=0.003747 Jy/beam ! Combined flux in latest and established models = 0.534784 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.534784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108842Jy sigma=2.049740 ! Fit after self-cal, rms=0.108830Jy sigma=2.049458 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327712 Jy ! Component: 100 - total flux cleaned = 0.050455 Jy ! Total flux subtracted in 100 components = 0.050455 Jy ! Clean residual min=-0.016330 max=0.023836 Jy/beam ! Clean residual mean=-0.000009 rms=0.003243 Jy/beam ! Combined flux in latest and established models = 0.585239 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.58524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094566Jy sigma=1.775682 ! Fit after self-cal, rms=0.094551Jy sigma=1.775370 ! Inverting map ! Added new window around map position (0.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126948 Jy ! Component: 100 - total flux cleaned = 0.0187708 Jy ! Total flux subtracted in 100 components = 0.0187708 Jy ! Clean residual min=-0.015132 max=0.020351 Jy/beam ! Clean residual mean=-0.000009 rms=0.002940 Jy/beam ! Combined flux in latest and established models = 0.60401 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.60401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090540Jy sigma=1.700338 ! Fit after self-cal, rms=0.090166Jy sigma=1.692866 ! Inverting map ! Added new window around map position (-2.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164079 Jy ! Component: 100 - total flux cleaned = 0.0225652 Jy ! Total flux subtracted in 100 components = 0.0225652 Jy ! Clean residual min=-0.013781 max=0.017472 Jy/beam ! Clean residual mean=-0.000008 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 0.626576 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.626576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086855Jy sigma=1.629855 ! Fit after self-cal, rms=0.086681Jy sigma=1.626241 ! Inverting map ! Added new window around map position (5.8, -5.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143219 Jy ! Component: 100 - total flux cleaned = 0.0232373 Jy ! Total flux subtracted in 100 components = 0.0232373 Jy ! Clean residual min=-0.013428 max=0.013571 Jy/beam ! Clean residual mean=-0.000009 rms=0.002545 Jy/beam ! Combined flux in latest and established models = 0.649813 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.649813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084592Jy sigma=1.584791 ! Fit after self-cal, rms=0.084507Jy sigma=1.582648 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=1.139 mas, bpa=37.85 degrees ! Estimated noise=0.249143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987044 Jy ! Component: 100 - total flux cleaned = 0.0167442 Jy ! Component: 150 - total flux cleaned = 0.0220782 Jy ! Component: 200 - total flux cleaned = 0.0255649 Jy ! Total flux subtracted in 200 components = 0.0255649 Jy ! Clean residual min=-0.015340 max=0.013654 Jy/beam ! Clean residual mean=-0.000031 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 0.675378 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.675378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082940Jy sigma=1.553286 ! Fit after self-cal, rms=0.082888Jy sigma=1.552339 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9693 x 1.139 at 37.85 degrees (North through East) ! Clean map min=-0.014322 max=0.56771 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.03 KP 1.00 ! LA 0.98 MK 1.03 NL 1.09 OV 0.90 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 1.04 KP 1.00 ! LA 0.99 MK 1.03 NL 1.09 OV 0.90 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.03 KP 1.00 ! LA 0.99 MK 1.02 NL 1.09 OV 0.91 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 1.03 KP 1.00 ! LA 0.98 MK 1.02 NL 1.09 OV 0.91 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 1.04 KP 0.99 ! LA 0.99 MK 1.03 NL 1.09 OV 0.91 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.02 KP 1.01 ! LA 1.00 MK 1.02 NL 1.10 OV 0.91 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 1.04 KP 1.00 ! LA 0.99 MK 1.03 NL 1.10 OV 0.91 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 1.03 KP 0.99 ! LA 0.99 MK 1.02 NL 1.09 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 1.02 KP 0.99 ! LA 0.99 MK 1.03 NL 1.10 OV 0.90 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 1.02 KP 1.01 ! LA 0.98 MK 1.02 NL 1.10 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 1.04 KP 1.00 ! LA 0.98 MK 1.03 NL 1.10 OV 0.90 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 HN 1.04 KP 1.01 ! LA 0.99 MK 1.03 NL 1.10 OV 0.90 ! PT 0.93 SC 0.99 ! ! ! Fit before self-cal, rms=0.082888Jy sigma=1.552339 ! Fit after self-cal, rms=0.072122Jy sigma=1.287450 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9732 mas, bmaj=1.146 mas, bpa=38.86 degrees ! Estimated noise=0.250718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00801498 Jy ! Component: 100 - total flux cleaned = -0.0127808 Jy ! Component: 150 - total flux cleaned = -0.0150915 Jy ! Component: 200 - total flux cleaned = -0.0162802 Jy ! Total flux subtracted in 200 components = -0.0162802 Jy ! Clean residual min=-0.009027 max=0.008043 Jy/beam ! Clean residual mean=-0.000039 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.659098 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.659098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070926Jy sigma=1.262303 ! Fit after self-cal, rms=0.070905Jy sigma=1.261020 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070905Jy sigma=1.261020 ! Fit after self-cal, rms=0.064592Jy sigma=1.136669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=1.15 mas, bpa=40.13 degrees ! Estimated noise=0.251461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00830118 Jy ! Component: 100 - total flux cleaned = -0.0110055 Jy ! Component: 150 - total flux cleaned = -0.012365 Jy ! Component: 200 - total flux cleaned = -0.0133356 Jy ! Total flux subtracted in 200 components = -0.0133356 Jy ! Clean residual min=-0.005355 max=0.004789 Jy/beam ! Clean residual mean=-0.000001 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.645762 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.645762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063195Jy sigma=1.109086 ! Fit after self-cal, rms=0.063093Jy sigma=1.107031 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187727 Jy ! Component: 100 - total flux cleaned = -0.00288491 Jy ! Component: 150 - total flux cleaned = -0.00317803 Jy ! Component: 200 - total flux cleaned = -0.00343915 Jy ! Total flux subtracted in 200 components = -0.00343915 Jy ! Clean residual min=-0.004794 max=0.004674 Jy/beam ! Clean residual mean=-0.000000 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.642323 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.642323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062760Jy sigma=1.100456 ! Fit after self-cal, rms=0.062735Jy sigma=1.100103 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062735Jy sigma=1.100103 ! Fit after self-cal, rms=0.062365Jy sigma=1.092621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9716 mas, bmaj=1.149 mas, bpa=40.23 degrees ! Estimated noise=0.251413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320999 Jy ! Component: 100 - total flux cleaned = -0.00436144 Jy ! Component: 150 - total flux cleaned = -0.0046807 Jy ! Component: 200 - total flux cleaned = -0.0049623 Jy ! Total flux subtracted in 200 components = -0.0049623 Jy ! Clean residual min=-0.003887 max=0.003962 Jy/beam ! Clean residual mean=-0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.637361 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.637361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061903Jy sigma=1.083833 ! Fit after self-cal, rms=0.061875Jy sigma=1.083291 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000801506 Jy ! Component: 100 - total flux cleaned = -0.00120848 Jy ! Component: 150 - total flux cleaned = -0.00135326 Jy ! Component: 200 - total flux cleaned = -0.00149147 Jy ! Total flux subtracted in 200 components = -0.00149147 Jy ! Clean residual min=-0.003561 max=0.003870 Jy/beam ! Clean residual mean=-0.000003 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.635869 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.635869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061693Jy sigma=1.079824 ! Fit after self-cal, rms=0.061683Jy sigma=1.079690 ! Inverting map ! Added new window around map position (1.6, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347087 Jy ! Component: 100 - total flux cleaned = 0.00374198 Jy ! Component: 150 - total flux cleaned = 0.00352137 Jy ! Component: 200 - total flux cleaned = 0.0033869 Jy ! Total flux subtracted in 200 components = 0.0033869 Jy ! Clean residual min=-0.003473 max=0.003189 Jy/beam ! Clean residual mean=-0.000005 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.639256 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.639256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061398Jy sigma=1.075055 ! Fit after self-cal, rms=0.061380Jy sigma=1.074815 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061380Jy sigma=1.074815 ! Fit after self-cal, rms=0.061231Jy sigma=1.071956 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.454 mas, bpa=63.62 degrees ! Estimated noise=0.337362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000887163 Jy ! Component: 100 - total flux cleaned = -0.00113099 Jy ! Component: 150 - total flux cleaned = -0.0014748 Jy ! Component: 200 - total flux cleaned = -0.0016385 Jy ! Total flux subtracted in 200 components = -0.0016385 Jy ! Clean residual min=-0.002851 max=0.002441 Jy/beam ! Clean residual mean=-0.000011 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.637618 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.637618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061151Jy sigma=1.070573 ! Fit after self-cal, rms=0.061146Jy sigma=1.070472 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177714 Jy ! Component: 100 - total flux cleaned = -0.000176781 Jy ! Component: 150 - total flux cleaned = -0.000175462 Jy ! Component: 200 - total flux cleaned = -0.000232107 Jy ! Total flux subtracted in 200 components = -0.000232107 Jy ! Clean residual min=-0.002804 max=0.002343 Jy/beam ! Clean residual mean=-0.000011 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.637386 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.637386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061107Jy sigma=1.069789 ! Fit after self-cal, rms=0.061105Jy sigma=1.069769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9701 mas, bmaj=1.148 mas, bpa=40.4 degrees ! Estimated noise=0.251238 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9701 x 1.148 at 40.4 degrees (North through East) ! Clean map min=-0.0030921 max=0.57409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061105Jy sigma=1.069769 ! Fit after self-cal, rms=0.056995Jy sigma=0.986262 ! Inverting map and beam ! Estimated beam: bmin=0.9704 mas, bmaj=1.148 mas, bpa=40.51 degrees ! Estimated noise=0.251215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153948 Jy ! Component: 100 - total flux cleaned = 0.000226097 Jy ! Component: 150 - total flux cleaned = 0.000295445 Jy ! Component: 200 - total flux cleaned = 0.000296778 Jy ! Total flux subtracted in 200 components = 0.000296778 Jy ! Clean residual min=-0.003070 max=0.002431 Jy/beam ! Clean residual mean=-0.000003 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.637682 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.637682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056795Jy sigma=0.982788 ! Fit after self-cal, rms=0.056786Jy sigma=0.982652 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265604 Jy ! Component: 100 - total flux cleaned = -0.000443282 Jy ! Component: 150 - total flux cleaned = -0.000553883 Jy ! Component: 200 - total flux cleaned = -0.00060756 Jy ! Total flux subtracted in 200 components = -0.00060756 Jy ! Clean residual min=-0.002887 max=0.002320 Jy/beam ! Clean residual mean=-0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.637075 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.637075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056679Jy sigma=0.980674 ! Fit after self-cal, rms=0.056675Jy sigma=0.980629 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056675Jy sigma=0.980629 ! Fit after self-cal, rms=0.056667Jy sigma=0.980048 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7589 mas, bmaj=0.8591 mas, bpa=37.48 degrees ! Estimated noise=0.520472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.442559 Jy ! Component: 100 - total flux cleaned = 0.539678 Jy ! Component: 150 - total flux cleaned = 0.571272 Jy ! Component: 200 - total flux cleaned = 0.588989 Jy ! Total flux subtracted in 200 components = 0.588989 Jy ! Clean residual min=-0.005775 max=0.009171 Jy/beam ! Clean residual mean=-0.000001 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.588989 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.588989 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9695 mas, bmaj=1.148 mas, bpa=40.59 degrees ! Estimated noise=0.251143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140595 Jy ! Component: 100 - total flux cleaned = 0.0224718 Jy ! Component: 150 - total flux cleaned = 0.0283017 Jy ! Component: 200 - total flux cleaned = 0.0325963 Jy ! Total flux subtracted in 200 components = 0.0325963 Jy ! Clean residual min=-0.002638 max=0.003868 Jy/beam ! Clean residual mean=0.000001 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.621586 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.621586 Jy ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377043 Jy ! Component: 100 - total flux cleaned = 0.0052064 Jy ! Component: 150 - total flux cleaned = 0.00625025 Jy ! Component: 200 - total flux cleaned = 0.0070139 Jy ! Total flux subtracted in 200 components = 0.0070139 Jy ! Clean residual min=-0.002339 max=0.002380 Jy/beam ! Clean residual mean=-0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.628599 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.628599 Jy ! Inverting map ! Added new window around map position (5.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625654 Jy ! Component: 100 - total flux cleaned = 0.00115587 Jy ! Component: 150 - total flux cleaned = 0.00163837 Jy ! Component: 200 - total flux cleaned = 0.00208462 Jy ! Total flux subtracted in 200 components = 0.00208462 Jy ! Clean residual min=-0.002147 max=0.002188 Jy/beam ! Clean residual mean=-0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.630684 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 67 components and 0.630684 Jy ! Inverting map ! Added new window around map position (7.4, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133053 Jy ! Component: 100 - total flux cleaned = 0.00145157 Jy ! Component: 150 - total flux cleaned = 0.00150925 Jy ! Component: 200 - total flux cleaned = 0.00167173 Jy ! Total flux subtracted in 200 components = 0.00167173 Jy ! Clean residual min=-0.002066 max=0.001982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.632356 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 0.632356 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.456 mas, bpa=63.67 degrees ! Estimated noise=0.337432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199004 Jy ! Component: 100 - total flux cleaned = 0.00053233 Jy ! Component: 150 - total flux cleaned = 0.000891119 Jy ! Component: 200 - total flux cleaned = 0.00108126 Jy ! Total flux subtracted in 200 components = 0.00108126 Jy ! Clean residual min=-0.002244 max=0.001867 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.633437 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173624 Jy ! Component: 100 - total flux cleaned = 0.000279942 Jy ! Component: 150 - total flux cleaned = 0.00037721 Jy ! Component: 200 - total flux cleaned = 0.000468432 Jy ! Total flux subtracted in 200 components = 0.000468432 Jy ! Clean residual min=-0.002148 max=0.001853 Jy/beam ! Clean residual mean=-0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.633905 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.633905 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9695 mas, bmaj=1.148 mas, bpa=40.59 degrees ! Estimated noise=0.251143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279651 Jy ! Component: 100 - total flux cleaned = -0.000374605 Jy ! Component: 150 - total flux cleaned = -0.00032942 Jy ! Component: 200 - total flux cleaned = -0.000287728 Jy ! Total flux subtracted in 200 components = -0.000287728 Jy ! Clean residual min=-0.001877 max=0.001757 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.633618 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.633618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056399Jy sigma=0.974568 ! Fit after self-cal, rms=0.056347Jy sigma=0.973624 wmodel J1645+6330_X_map.mod ! Writing 118 model components to file: J1645+6330_X_map.mod wobs J1645+6330_X_uvs.fits ! Writing UV FITS file: J1645+6330_X_uvs.fits wwins J1645+6330_X_map.win ! wwins: Wrote 8 windows to J1645+6330_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290231 Jy ! Component: 100 - total flux cleaned = 0.000132652 Jy ! Component: 150 - total flux cleaned = -0.000168306 Jy ! Component: 200 - total flux cleaned = -0.000341921 Jy ! Component: 250 - total flux cleaned = -0.000397657 Jy ! Component: 300 - total flux cleaned = -0.000560385 Jy ! Component: 350 - total flux cleaned = -0.000665809 Jy ! Component: 400 - total flux cleaned = -0.000768688 Jy ! Component: 450 - total flux cleaned = -0.000718407 Jy ! Component: 500 - total flux cleaned = -0.000694331 Jy ! Component: 550 - total flux cleaned = -0.000694242 Jy ! Component: 600 - total flux cleaned = -0.000646636 Jy ! Component: 650 - total flux cleaned = -0.000623505 Jy ! Component: 700 - total flux cleaned = -0.000600218 Jy ! Component: 750 - total flux cleaned = -0.000554865 Jy ! Component: 800 - total flux cleaned = -0.000510521 Jy ! Component: 850 - total flux cleaned = -0.000445776 Jy ! Component: 900 - total flux cleaned = -0.000467129 Jy ! Component: 950 - total flux cleaned = -0.000382659 Jy ! Component: 1000 - total flux cleaned = -0.000341279 Jy ! Component: 1050 - total flux cleaned = -0.000423496 Jy ! Component: 1100 - total flux cleaned = -0.000362396 Jy ! Component: 1150 - total flux cleaned = -0.000342135 Jy ! Component: 1200 - total flux cleaned = -0.000263812 Jy ! Component: 1250 - total flux cleaned = -0.000322606 Jy ! Component: 1300 - total flux cleaned = -0.000245226 Jy ! Component: 1350 - total flux cleaned = -0.000187772 Jy ! Component: 1400 - total flux cleaned = -7.457e-05 Jy ! Component: 1450 - total flux cleaned = 1.83943e-05 Jy ! Component: 1500 - total flux cleaned = 0.00012833 Jy ! Component: 1550 - total flux cleaned = 0.000201007 Jy ! Component: 1600 - total flux cleaned = 0.000308554 Jy ! Component: 1650 - total flux cleaned = 0.000397194 Jy ! Component: 1700 - total flux cleaned = 0.000397131 Jy ! Component: 1750 - total flux cleaned = 0.000431744 Jy ! Component: 1800 - total flux cleaned = 0.000500459 Jy ! Component: 1850 - total flux cleaned = 0.000500538 Jy ! Component: 1900 - total flux cleaned = 0.000567742 Jy ! Component: 1950 - total flux cleaned = 0.000584649 Jy ! Component: 2000 - total flux cleaned = 0.000634463 Jy ! Component: 2050 - total flux cleaned = 0.000699709 Jy ! Component: 2100 - total flux cleaned = 0.000748272 Jy ! Component: 2150 - total flux cleaned = 0.0007962 Jy ! Component: 2200 - total flux cleaned = 0.000891292 Jy ! Component: 2250 - total flux cleaned = 0.000890986 Jy ! Component: 2300 - total flux cleaned = 0.000906701 Jy ! Component: 2350 - total flux cleaned = 0.00102974 Jy ! Component: 2400 - total flux cleaned = 0.00107538 Jy ! Component: 2450 - total flux cleaned = 0.00106032 Jy ! Component: 2500 - total flux cleaned = 0.00110522 Jy ! Component: 2550 - total flux cleaned = 0.00116453 Jy ! Component: 2600 - total flux cleaned = 0.00116468 Jy ! Component: 2650 - total flux cleaned = 0.0011358 Jy ! Component: 2700 - total flux cleaned = 0.00116476 Jy ! Component: 2750 - total flux cleaned = 0.00117921 Jy ! Component: 2800 - total flux cleaned = 0.00115107 Jy ! Component: 2850 - total flux cleaned = 0.00122138 Jy ! Component: 2900 - total flux cleaned = 0.00126322 Jy ! Component: 2950 - total flux cleaned = 0.00126319 Jy ! Component: 3000 - total flux cleaned = 0.00124938 Jy ! Component: 3050 - total flux cleaned = 0.00123589 Jy ! Component: 3100 - total flux cleaned = 0.00124947 Jy ! Component: 3150 - total flux cleaned = 0.00123603 Jy ! Component: 3200 - total flux cleaned = 0.00128922 Jy ! Component: 3250 - total flux cleaned = 0.0012497 Jy ! Component: 3300 - total flux cleaned = 0.00122352 Jy ! Component: 3350 - total flux cleaned = 0.00126252 Jy ! Component: 3400 - total flux cleaned = 0.0011849 Jy ! Component: 3450 - total flux cleaned = 0.00124903 Jy ! Component: 3500 - total flux cleaned = 0.00123637 Jy ! Component: 3550 - total flux cleaned = 0.00122373 Jy ! Component: 3600 - total flux cleaned = 0.00131149 Jy ! Component: 3650 - total flux cleaned = 0.00121186 Jy ! Component: 3700 - total flux cleaned = 0.00126142 Jy ! Component: 3750 - total flux cleaned = 0.00132266 Jy ! Component: 3800 - total flux cleaned = 0.0012862 Jy ! Component: 3850 - total flux cleaned = 0.00125012 Jy ! Component: 3900 - total flux cleaned = 0.00132216 Jy ! Component: 3950 - total flux cleaned = 0.00129833 Jy ! Component: 4000 - total flux cleaned = 0.00131015 Jy ! Component: 4050 - total flux cleaned = 0.00134539 Jy ! Total flux subtracted in 4096 components = 0.00133361 Jy ! Clean residual min=-0.000705 max=0.000589 Jy/beam ! Clean residual mean=0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.634951 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 415 components and 0.634952 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1645+6330_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9695 x 1.148 at 40.59 degrees (North through East) ! Clean map min=-0.0014187 max=0.57828 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1645+6330_X_map.fits wmodel /vlbi/uf001/uva//J1645+6330_X_map.mod ! Writing 415 model components to file: /vlbi/uf001/uva//J1645+6330_X_map.mod wobs /vlbi/uf001/uva//J1645+6330_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1645+6330_X_uvs.fits wwins /vlbi/uf001/uva//J1645+6330_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J1645+6330_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.578284 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194021 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.100653 0.100653 0.201307 0.402614 0.805228 1.61046 3.22091 6.44182 12.8836 25.7673 51.5346 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.578 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2980.52 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1645+6330_X_dfm.log closed on Mon Jan 14 03:52:06 2019