! Started logfile: /vlbi/uf001/uva//J1644-1804_S_dfm.log on Mon Jan 14 03:51:43 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1644-1804_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1644-1804_S_uva.fits
! AN table 1: 58 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.977833 visibilities/baseline/integration-bin.
! Found source: J1644-1804
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3573 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1644-1804_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017912Jy  sigma=18.277720
! Fit after  self-cal, rms=0.875584Jy  sigma=15.681270
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.078 mas, bmaj=29.6 mas, bpa=-7.411 degrees
! Estimated noise=1.18483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0969441 Jy
! Component: 100  -  total flux cleaned = 0.12193 Jy
! Total flux subtracted in 100 components = 0.12193 Jy
! Clean residual min=-0.007285 max=0.010737 Jy/beam
! Clean residual mean=-0.000055 rms=0.002403 Jy/beam
! Combined flux in latest and established models = 0.12193 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.12193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070545Jy  sigma=1.226217
! Fit after  self-cal, rms=0.070516Jy  sigma=1.225567
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.833 mas, bmaj=29.72 mas, bpa=-7.048 degrees
! Estimated noise=0.679276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135633 Jy
! Component: 100  -  total flux cleaned = 0.0198555 Jy
! Component: 150  -  total flux cleaned = 0.0233045 Jy
! Component: 200  -  total flux cleaned = 0.0249812 Jy
! Total flux subtracted in 200 components = 0.0249812 Jy
! Clean residual min=-0.004631 max=0.007358 Jy/beam
! Clean residual mean=-0.000043 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.146911 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 64 components and 0.146911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068189Jy  sigma=1.179670
! Fit after  self-cal, rms=0.068156Jy  sigma=1.178726
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.833 x 29.72 at -7.048 degrees (North through East)
! Clean map  min=-0.004667  max=0.12704 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.06     KP        1.02     LA        0.91     
!   NL        1.05     OV        1.06     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.04     KP        1.01     LA        0.92     
!   NL        1.04     OV        0.96     PT        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.07     KP        1.03     LA        0.92     
!   NL        1.00     OV        0.97     PT        1.03     
! 
! 
! Fit before self-cal, rms=0.068156Jy  sigma=1.178726
! Fit after  self-cal, rms=0.068129Jy  sigma=1.169329
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.94 mas, bmaj=29.67 mas, bpa=-6.997 degrees
! Estimated noise=0.676429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048673 Jy
! Component: 100  -  total flux cleaned = 0.00563314 Jy
! Component: 150  -  total flux cleaned = 0.00620133 Jy
! Component: 200  -  total flux cleaned = 0.00669598 Jy
! Total flux subtracted in 200 components = 0.00669598 Jy
! Clean residual min=-0.003313 max=0.003356 Jy/beam
! Clean residual mean=-0.000018 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.153607 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 96 components and 0.153607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067699Jy  sigma=1.161451
! Fit after  self-cal, rms=0.067710Jy  sigma=1.160693
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067710Jy  sigma=1.160693
! Fit after  self-cal, rms=0.067854Jy  sigma=1.154602
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.94 mas, bmaj=29.59 mas, bpa=-7.044 degrees
! Estimated noise=0.672539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878054 Jy
! Component: 100  -  total flux cleaned = 0.00112958 Jy
! Component: 150  -  total flux cleaned = 0.00142379 Jy
! Component: 200  -  total flux cleaned = 0.00146451 Jy
! Total flux subtracted in 200 components = 0.00146451 Jy
! Clean residual min=-0.002582 max=0.002695 Jy/beam
! Clean residual mean=-0.000005 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.155072 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 141 components and 0.155072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067734Jy  sigma=1.152685
! Fit after  self-cal, rms=0.067747Jy  sigma=1.152458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305894 Jy
! Component: 100  -  total flux cleaned = 0.00034827 Jy
! Component: 150  -  total flux cleaned = 0.00031777 Jy
! Component: 200  -  total flux cleaned = 0.000288445 Jy
! Total flux subtracted in 200 components = 0.000288445 Jy
! Clean residual min=-0.002494 max=0.002741 Jy/beam
! Clean residual mean=-0.000004 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.15536 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 176 components and 0.15536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067709Jy  sigma=1.151890
! Fit after  self-cal, rms=0.067706Jy  sigma=1.151850
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067706Jy  sigma=1.151850
! Fit after  self-cal, rms=0.068002Jy  sigma=1.151337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.951 mas, bmaj=29.51 mas, bpa=-7.034 degrees
! Estimated noise=0.671149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.40137e-05 Jy
! Component: 100  -  total flux cleaned = 8.06421e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112927 Jy
! Component: 200  -  total flux cleaned = 0.00011322 Jy
! Total flux subtracted in 200 components = 0.00011322 Jy
! Clean residual min=-0.002315 max=0.002451 Jy/beam
! Clean residual mean=-0.000001 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.155474 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 211 components and 0.155474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067960Jy  sigma=1.150735
! Fit after  self-cal, rms=0.067969Jy  sigma=1.150683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156478 Jy
! Component: 100  -  total flux cleaned = 7.6432e-05 Jy
! Component: 150  -  total flux cleaned = 4.0671e-06 Jy
! Component: 200  -  total flux cleaned = -4.00941e-05 Jy
! Total flux subtracted in 200 components = -4.00941e-05 Jy
! Clean residual min=-0.002258 max=0.002440 Jy/beam
! Clean residual mean=-0.000001 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.155433 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 234 components and 0.155433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067949Jy  sigma=1.150402
! Fit after  self-cal, rms=0.067947Jy  sigma=1.150385
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067947Jy  sigma=1.150385
! Fit after  self-cal, rms=0.068169Jy  sigma=1.150236
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.311 mas, bmaj=29.86 mas, bpa=-5.939 degrees
! Estimated noise=0.702859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206456 Jy
! Component: 100  -  total flux cleaned = 0.000450484 Jy
! Component: 150  -  total flux cleaned = 0.000513598 Jy
! Component: 200  -  total flux cleaned = 0.000494324 Jy
! Total flux subtracted in 200 components = 0.000494324 Jy
! Clean residual min=-0.002225 max=0.002480 Jy/beam
! Clean residual mean=-0.000000 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.155928 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 262 components and 0.155928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068153Jy  sigma=1.149992
! Fit after  self-cal, rms=0.068160Jy  sigma=1.149980
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.84457e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133475 Jy
! Component: 150  -  total flux cleaned = 0.000116637 Jy
! Component: 200  -  total flux cleaned = 0.000117093 Jy
! Total flux subtracted in 200 components = 0.000117093 Jy
! Clean residual min=-0.002203 max=0.002470 Jy/beam
! Clean residual mean=-0.000000 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.156045 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 282 components and 0.156045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068153Jy  sigma=1.149863
! Fit after  self-cal, rms=0.068152Jy  sigma=1.149859
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.959 mas, bmaj=29.45 mas, bpa=-7.022 degrees
! Estimated noise=0.670646 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.959 x 29.45 at -7.022 degrees (North through East)
! Clean map  min=-0.0028387  max=0.12629 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.177 mas, bmaj=29.45 mas, bpa=-7.485 degrees
! Estimated noise=1.182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.096597 Jy
! Component: 100  -  total flux cleaned = 0.120312 Jy
! Component: 150  -  total flux cleaned = 0.131335 Jy
! Component: 200  -  total flux cleaned = 0.138331 Jy
! Total flux subtracted in 200 components = 0.138331 Jy
! Clean residual min=-0.004595 max=0.004778 Jy/beam
! Clean residual mean=-0.000020 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.138331 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.138331 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.959 mas, bmaj=29.45 mas, bpa=-7.022 degrees
! Estimated noise=0.670646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581978 Jy
! Component: 100  -  total flux cleaned = 0.00846595 Jy
! Component: 150  -  total flux cleaned = 0.00975658 Jy
! Component: 200  -  total flux cleaned = 0.0109069 Jy
! Total flux subtracted in 200 components = 0.0109069 Jy
! Clean residual min=-0.003177 max=0.002748 Jy/beam
! Clean residual mean=-0.000008 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.149238 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 107 components and 0.149237 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.311 mas, bmaj=29.86 mas, bpa=-5.939 degrees
! Estimated noise=0.702859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218181 Jy
! Component: 100  -  total flux cleaned = 0.0036726 Jy
! Component: 150  -  total flux cleaned = 0.00430063 Jy
! Component: 200  -  total flux cleaned = 0.00457138 Jy
! Total flux subtracted in 200 components = 0.00457138 Jy
! Clean residual min=-0.002562 max=0.002592 Jy/beam
! Clean residual mean=-0.000004 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.153809 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354879 Jy
! Component: 100  -  total flux cleaned = 0.000595899 Jy
! Component: 150  -  total flux cleaned = 0.000909057 Jy
! Component: 200  -  total flux cleaned = 0.00113921 Jy
! Total flux subtracted in 200 components = 0.00113921 Jy
! Clean residual min=-0.002443 max=0.002535 Jy/beam
! Clean residual mean=-0.000002 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.154948 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 205 components and 0.154948 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.959 mas, bmaj=29.45 mas, bpa=-7.022 degrees
! Estimated noise=0.670646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.81551e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121695 Jy
! Component: 150  -  total flux cleaned = -0.00012012 Jy
! Component: 200  -  total flux cleaned = -0.000174638 Jy
! Total flux subtracted in 200 components = -0.000174638 Jy
! Clean residual min=-0.002254 max=0.002468 Jy/beam
! Clean residual mean=-0.000001 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.154773 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 234 components and 0.154773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068180Jy  sigma=1.150466
! Fit after  self-cal, rms=0.068179Jy  sigma=1.150379
wmodel J1644-1804_S_map.mod
! Writing 234 model components to file: J1644-1804_S_map.mod
wobs   J1644-1804_S_uvs.fits
! Writing UV FITS file: J1644-1804_S_uvs.fits
wwins  J1644-1804_S_map.win
! wwins: Wrote 2 windows to J1644-1804_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369761 Jy
! Component: 100  -  total flux cleaned = 0.000404489 Jy
! Component: 150  -  total flux cleaned = 0.000473152 Jy
! Component: 200  -  total flux cleaned = 0.00056529 Jy
! Component: 250  -  total flux cleaned = 0.000623803 Jy
! Component: 300  -  total flux cleaned = 0.000680714 Jy
! Component: 350  -  total flux cleaned = 0.000680867 Jy
! Component: 400  -  total flux cleaned = 0.000732571 Jy
! Component: 450  -  total flux cleaned = 0.000707141 Jy
! Component: 500  -  total flux cleaned = 0.000683221 Jy
! Component: 550  -  total flux cleaned = 0.000613979 Jy
! Component: 600  -  total flux cleaned = 0.000637076 Jy
! Component: 650  -  total flux cleaned = 0.000592843 Jy
! Component: 700  -  total flux cleaned = 0.000528436 Jy
! Component: 750  -  total flux cleaned = 0.000507584 Jy
! Component: 800  -  total flux cleaned = 0.000446898 Jy
! Component: 850  -  total flux cleaned = 0.00044654 Jy
! Component: 900  -  total flux cleaned = 0.000311999 Jy
! Component: 950  -  total flux cleaned = 0.000274797 Jy
! Component: 1000  -  total flux cleaned = 0.000256289 Jy
! Component: 1050  -  total flux cleaned = 0.000256155 Jy
! Component: 1100  -  total flux cleaned = 0.000220755 Jy
! Component: 1150  -  total flux cleaned = 0.000169237 Jy
! Component: 1200  -  total flux cleaned = 0.000169312 Jy
! Component: 1250  -  total flux cleaned = 0.000185782 Jy
! Component: 1300  -  total flux cleaned = 0.000202366 Jy
! Component: 1350  -  total flux cleaned = 0.000234936 Jy
! Component: 1400  -  total flux cleaned = 0.000330139 Jy
! Component: 1450  -  total flux cleaned = 0.000376865 Jy
! Component: 1500  -  total flux cleaned = 0.000423069 Jy
! Component: 1550  -  total flux cleaned = 0.000483665 Jy
! Component: 1600  -  total flux cleaned = 0.000513778 Jy
! Component: 1650  -  total flux cleaned = 0.000573144 Jy
! Component: 1700  -  total flux cleaned = 0.000602575 Jy
! Component: 1750  -  total flux cleaned = 0.000617346 Jy
! Component: 1800  -  total flux cleaned = 0.000717703 Jy
! Component: 1850  -  total flux cleaned = 0.000731852 Jy
! Component: 1900  -  total flux cleaned = 0.000773983 Jy
! Component: 1950  -  total flux cleaned = 0.000843383 Jy
! Component: 2000  -  total flux cleaned = 0.000829613 Jy
! Component: 2050  -  total flux cleaned = 0.000884217 Jy
! Component: 2100  -  total flux cleaned = 0.000911292 Jy
! Component: 2150  -  total flux cleaned = 0.000938224 Jy
! Component: 2200  -  total flux cleaned = 0.000951639 Jy
! Component: 2250  -  total flux cleaned = 0.00103149 Jy
! Component: 2300  -  total flux cleaned = 0.00109765 Jy
! Component: 2350  -  total flux cleaned = 0.00115045 Jy
! Component: 2400  -  total flux cleaned = 0.00120291 Jy
! Component: 2450  -  total flux cleaned = 0.0012421 Jy
! Component: 2500  -  total flux cleaned = 0.00129419 Jy
! Component: 2550  -  total flux cleaned = 0.00132021 Jy
! Component: 2600  -  total flux cleaned = 0.00129421 Jy
! Component: 2650  -  total flux cleaned = 0.00129423 Jy
! Component: 2700  -  total flux cleaned = 0.00132009 Jy
! Component: 2750  -  total flux cleaned = 0.00132003 Jy
! Component: 2800  -  total flux cleaned = 0.00129424 Jy
! Component: 2850  -  total flux cleaned = 0.00133295 Jy
! Component: 2900  -  total flux cleaned = 0.00130715 Jy
! Component: 2950  -  total flux cleaned = 0.00132004 Jy
! Component: 3000  -  total flux cleaned = 0.00131999 Jy
! Component: 3050  -  total flux cleaned = 0.00132006 Jy
! Component: 3100  -  total flux cleaned = 0.00133286 Jy
! Component: 3150  -  total flux cleaned = 0.00130706 Jy
! Component: 3200  -  total flux cleaned = 0.00131993 Jy
! Component: 3250  -  total flux cleaned = 0.00133285 Jy
! Component: 3300  -  total flux cleaned = 0.00134574 Jy
! Component: 3350  -  total flux cleaned = 0.00135865 Jy
! Component: 3400  -  total flux cleaned = 0.00137156 Jy
! Component: 3450  -  total flux cleaned = 0.00138456 Jy
! Component: 3500  -  total flux cleaned = 0.0014105 Jy
! Component: 3550  -  total flux cleaned = 0.00141048 Jy
! Component: 3600  -  total flux cleaned = 0.00143644 Jy
! Component: 3650  -  total flux cleaned = 0.00147547 Jy
! Component: 3700  -  total flux cleaned = 0.00147549 Jy
! Component: 3750  -  total flux cleaned = 0.00150161 Jy
! Component: 3800  -  total flux cleaned = 0.00150164 Jy
! Component: 3850  -  total flux cleaned = 0.0015409 Jy
! Component: 3900  -  total flux cleaned = 0.00155405 Jy
! Component: 3950  -  total flux cleaned = 0.00161997 Jy
! Component: 4000  -  total flux cleaned = 0.00164654 Jy
! Component: 4050  -  total flux cleaned = 0.00172623 Jy
! Total flux subtracted in 4096 components = 0.00176635 Jy
! Clean residual min=-0.000726 max=0.000773 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.15654 Jy
keep
! Adding 383 model components to the UV plane model.
! The established model now contains 617 components and 0.15654 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1644-1804_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.959 x 29.45 at -7.022 degrees (North through East)
! Clean map  min=-0.0024453  max=0.1265 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1644-1804_S_map.fits
wmodel /vlbi/uf001/uva//J1644-1804_S_map.mod
! Writing 617 model components to file: /vlbi/uf001/uva//J1644-1804_S_map.mod
wobs   /vlbi/uf001/uva//J1644-1804_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1644-1804_S_uvs.fits
wwins  /vlbi/uf001/uva//J1644-1804_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1644-1804_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126495 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262204 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.621851 0.621851 1.2437 2.4874 4.97481 9.94961 19.8992 39.7985 79.5969
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  482.43 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1644-1804_S_dfm.log closed on Mon Jan 14 03:51:48 2019