! Started logfile: /vlbi/uf001/uvm//J1638+6234_X_a_dfm.log on Sun Jan 13 22:02:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1638+6234_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1638+6234_X_a_uvm.fits ! AN table 1: 37 integrations on 21 of 21 possible baselines. ! AN table 2: 72 integrations on 10 of 10 possible baselines. ! AN table 3: 59 integrations on 10 of 10 possible baselines. ! AN table 4: 59 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.843108 visibilities/baseline/integration-bin. ! Found source: J1638+6234 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27084 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1638+6234_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.003194Jy sigma=23.869362 ! Fit after self-cal, rms=0.960340Jy sigma=22.849727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.592 mas, bmaj=5.261 mas, bpa=25.71 degrees ! Estimated noise=0.655257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272162 Jy ! Component: 100 - total flux cleaned = 0.0347861 Jy ! Total flux subtracted in 100 components = 0.0347861 Jy ! Clean residual min=-0.004527 max=0.004182 Jy/beam ! Clean residual mean=-0.000034 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0347861 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0347861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061320Jy sigma=1.419951 ! Fit after self-cal, rms=0.060081Jy sigma=1.392225 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.107 mas, bmaj=5.487 mas, bpa=24.91 degrees ! Estimated noise=0.185163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133374 Jy ! Component: 100 - total flux cleaned = 0.0227691 Jy ! Component: 150 - total flux cleaned = 0.0300511 Jy ! Component: 200 - total flux cleaned = 0.0357305 Jy ! Total flux subtracted in 200 components = 0.0357305 Jy ! Clean residual min=-0.007839 max=0.008410 Jy/beam ! Clean residual mean=-0.000278 rms=0.003383 Jy/beam ! Combined flux in latest and established models = 0.0705166 Jy ! Performing phase self-cal ! Adding 94 model components to the UV plane model. ! The established model now contains 108 components and 0.0705166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056251Jy sigma=1.290298 ! Fit after self-cal, rms=0.055751Jy sigma=1.281483 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.107 x 5.487 at 24.91 degrees (North through East) ! Clean map min=-0.007623 max=0.042715 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 0.99 KP 1.19 LA 1.07 ! NL 1.28 OV 0.89 PT 1.01 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.46 KP 1.62 LA 0.69 OV 1.43 ! PT 0.55 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.74 KP 1.96 LA 0.72 NL 1.66 ! PT 0.59 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.50 FD 2.66 KP 1.58 LA 0.69 ! PT 0.58 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.23 HN 1.17 KP 1.07 LA 1.00 ! NL 1.12 OV 0.97 PT 1.14 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.37 KP 1.75 LA 0.63 OV 1.29 ! PT 0.60 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.85 KP 1.71 LA 0.70 NL 1.74 ! PT 0.63 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.41 FD 2.59 KP 1.82 LA 0.62 ! PT 0.63 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 HN 1.08 KP 1.08 LA 0.98 ! NL 1.38 OV 0.92 PT 1.12 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.68 KP 1.87 LA 0.58 OV 1.39 ! PT 0.65 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.77 KP 1.97 LA 0.64 NL 1.62 ! PT 0.70 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.43 FD 2.89 KP 1.68 LA 0.65 ! PT 0.62 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 HN 1.00 KP 1.30 LA 0.93 ! NL 1.43 OV 1.04 PT 0.99 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.46 KP 1.53 LA 0.56 OV 1.27 ! PT 0.66 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.82 KP 2.59 LA 0.73 NL 1.54 ! PT 0.63 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.41 FD 2.97 KP 1.55 LA 0.66 ! PT 0.63 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 HN 0.95 KP 1.34 LA 0.82 ! NL 1.21 OV 0.99 PT 1.05 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.37 KP 1.75 LA 0.58 OV 1.08 ! PT 0.63 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.86 KP 2.29 LA 0.74 NL 1.58 ! PT 0.67 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.31 FD 2.37 KP 1.63 LA 0.64 ! PT 0.65 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 HN 1.00 KP 1.47 LA 0.80 ! NL 1.31 OV 1.06 PT 0.92 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.38 KP 1.53 LA 0.52 OV 1.18 ! PT 0.71 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.66 KP 2.45 LA 0.75 NL 1.39 ! PT 0.69 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.24 FD 2.03 KP 1.83 LA 0.56 ! PT 0.72 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.08 HN 0.97 KP 1.69 LA 0.75 ! NL 1.46 OV 0.98 PT 0.84 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 KP 1.53 LA 0.64 OV 1.07 ! PT 0.63 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.51 KP 2.20 LA 0.68 NL 1.37 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.88 KP 1.69 LA 0.60 ! PT 0.70 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.95 KP 1.83 LA 0.92 ! NL 1.35 OV 0.96 PT 0.80 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.34 KP 1.45 LA 0.60 OV 1.24 ! PT 0.61 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.40 KP 1.64 LA 0.78 NL 1.47 ! PT 0.84 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.28 FD 1.72 KP 1.42 LA 0.59 ! PT 0.76 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.89 HN 0.99 KP 1.64 LA 0.83 ! NL 1.67 OV 1.02 PT 0.71 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.25 KP 1.55 LA 0.63 OV 1.17 ! PT 0.63 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.21 KP 1.55 LA 0.76 NL 1.44 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.57 KP 1.43 LA 0.61 ! PT 0.71 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.30 HN 0.97 KP 1.74 LA 0.75 ! NL 1.47 OV 0.97 PT 0.67 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 KP 1.67 LA 0.63 OV 1.14 ! PT 0.59 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.25 KP 1.36 LA 0.84 NL 1.34 ! PT 0.81 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.50 KP 1.58 LA 0.61 ! PT 0.71 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.27 HN 1.04 KP 1.63 LA 0.75 ! NL 1.25 OV 1.19 PT 0.63 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 KP 1.50 LA 0.60 OV 1.25 ! PT 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.19 KP 1.23 LA 0.78 NL 1.25 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 FD 1.35 KP 1.44 LA 0.67 ! PT 0.66 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 0.92 KP 1.51 LA 0.80 ! NL 1.24 OV 0.99 PT 0.72 ! ! A total of 108 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 KP 1.27 LA 0.59 OV 1.12 ! PT 0.72 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.27 KP 1.11 LA 0.95 NL 0.94 ! PT 0.85 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.29 KP 1.30 LA 0.70 ! PT 0.67 ! ! ! Fit before self-cal, rms=0.055751Jy sigma=1.281483 ! Fit after self-cal, rms=0.074076Jy sigma=1.144957 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=5.481 mas, bpa=24.82 degrees ! Estimated noise=0.192339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161476 Jy ! Component: 100 - total flux cleaned = 0.000171228 Jy ! Component: 150 - total flux cleaned = 0.000462204 Jy ! Component: 200 - total flux cleaned = 0.000676372 Jy ! Total flux subtracted in 200 components = 0.000676372 Jy ! Clean residual min=-0.002584 max=0.004530 Jy/beam ! Clean residual mean=0.000007 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.071193 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 0.071193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073936Jy sigma=1.143692 ! Fit after self-cal, rms=0.076226Jy sigma=1.126711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076226Jy sigma=1.126711 ! Fit after self-cal, rms=0.084235Jy sigma=1.124663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=5.473 mas, bpa=24.97 degrees ! Estimated noise=0.197417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268785 Jy ! Component: 100 - total flux cleaned = 0.000361652 Jy ! Component: 150 - total flux cleaned = 0.000454579 Jy ! Component: 200 - total flux cleaned = 0.000537077 Jy ! Total flux subtracted in 200 components = 0.000537077 Jy ! Clean residual min=-0.001688 max=0.002514 Jy/beam ! Clean residual mean=0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.07173 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.07173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084200Jy sigma=1.123984 ! Fit after self-cal, rms=0.084503Jy sigma=1.123250 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211176 Jy ! Component: 100 - total flux cleaned = 0.00192337 Jy ! Component: 150 - total flux cleaned = 0.00180052 Jy ! Component: 200 - total flux cleaned = 0.00177316 Jy ! Total flux subtracted in 200 components = 0.00177316 Jy ! Clean residual min=-0.001483 max=0.001814 Jy/beam ! Clean residual mean=0.000021 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0735032 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 158 components and 0.0735032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084393Jy sigma=1.122006 ! Fit after self-cal, rms=0.084174Jy sigma=1.121173 ! Inverting map ! Added new window around map position (-12, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187391 Jy ! Component: 100 - total flux cleaned = 0.0020642 Jy ! Component: 150 - total flux cleaned = 0.00194867 Jy ! Component: 200 - total flux cleaned = 0.00181127 Jy ! Total flux subtracted in 200 components = 0.00181127 Jy ! Clean residual min=-0.001495 max=0.001774 Jy/beam ! Clean residual mean=0.000026 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0753145 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 188 components and 0.0753145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084040Jy sigma=1.120388 ! Fit after self-cal, rms=0.083795Jy sigma=1.119601 ! Inverting map ! Added new window around map position (2, -18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137869 Jy ! Component: 100 - total flux cleaned = 0.00153511 Jy ! Component: 150 - total flux cleaned = 0.00188919 Jy ! Component: 200 - total flux cleaned = 0.00208852 Jy ! Total flux subtracted in 200 components = 0.00208852 Jy ! Clean residual min=-0.001328 max=0.001795 Jy/beam ! Clean residual mean=0.000021 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.077403 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 217 components and 0.077403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083644Jy sigma=1.118458 ! Fit after self-cal, rms=0.083352Jy sigma=1.117792 ! Inverting map ! Added new window around map position (11.4, -10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180504 Jy ! Component: 100 - total flux cleaned = 0.00236614 Jy ! Component: 150 - total flux cleaned = 0.00294617 Jy ! Component: 200 - total flux cleaned = 0.00332302 Jy ! Total flux subtracted in 200 components = 0.00332302 Jy ! Clean residual min=-0.001358 max=0.001467 Jy/beam ! Clean residual mean=0.000016 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.080726 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 241 components and 0.080726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083185Jy sigma=1.116640 ! Fit after self-cal, rms=0.082914Jy sigma=1.116105 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082914Jy sigma=1.116105 ! Fit after self-cal, rms=0.078518Jy sigma=1.114257 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.191 mas, bmaj=5.426 mas, bpa=24.71 degrees ! Estimated noise=0.192266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151092 Jy ! Component: 100 - total flux cleaned = 0.00204997 Jy ! Component: 150 - total flux cleaned = 0.00225721 Jy ! Component: 200 - total flux cleaned = 0.00243223 Jy ! Total flux subtracted in 200 components = 0.00243223 Jy ! Clean residual min=-0.000959 max=0.001185 Jy/beam ! Clean residual mean=0.000007 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0831582 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 275 components and 0.0831582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078413Jy sigma=1.112945 ! Fit after self-cal, rms=0.078089Jy sigma=1.112114 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119119 Jy ! Component: 100 - total flux cleaned = 0.00165648 Jy ! Component: 150 - total flux cleaned = 0.00202683 Jy ! Component: 200 - total flux cleaned = 0.00229827 Jy ! Total flux subtracted in 200 components = 0.00229827 Jy ! Clean residual min=-0.000972 max=0.001157 Jy/beam ! Clean residual mean=0.000011 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.0854565 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 300 components and 0.0854565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077994Jy sigma=1.111375 ! Fit after self-cal, rms=0.077764Jy sigma=1.111042 ! Inverting map ! Added new window around map position (20.2, 26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133023 Jy ! Component: 100 - total flux cleaned = 0.00202704 Jy ! Component: 150 - total flux cleaned = 0.00246702 Jy ! Component: 200 - total flux cleaned = 0.00277322 Jy ! Total flux subtracted in 200 components = 0.00277322 Jy ! Clean residual min=-0.000933 max=0.001130 Jy/beam ! Clean residual mean=0.000014 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0882297 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 331 components and 0.0882297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077675Jy sigma=1.110296 ! Fit after self-cal, rms=0.077469Jy sigma=1.110064 ! Inverting map ! Added new window around map position (-43.8, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132065 Jy ! Component: 100 - total flux cleaned = 0.00211273 Jy ! Component: 150 - total flux cleaned = 0.00263372 Jy ! Component: 200 - total flux cleaned = 0.00295361 Jy ! Total flux subtracted in 200 components = 0.00295361 Jy ! Clean residual min=-0.000940 max=0.001119 Jy/beam ! Clean residual mean=0.000010 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0911833 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 360 components and 0.0911833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077382Jy sigma=1.109463 ! Fit after self-cal, rms=0.077216Jy sigma=1.109150 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077216Jy sigma=1.109150 ! Fit after self-cal, rms=0.073878Jy sigma=1.108234 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=5.514 mas, bpa=23.41 degrees ! Estimated noise=0.189808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115426 Jy ! Component: 100 - total flux cleaned = 0.00166941 Jy ! Component: 150 - total flux cleaned = 0.00199306 Jy ! Component: 200 - total flux cleaned = 0.00231281 Jy ! Total flux subtracted in 200 components = 0.00231281 Jy ! Clean residual min=-0.000678 max=0.000897 Jy/beam ! Clean residual mean=0.000005 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0934961 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 391 components and 0.0934961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073829Jy sigma=1.107599 ! Fit after self-cal, rms=0.073604Jy sigma=1.107080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984709 Jy ! Component: 100 - total flux cleaned = 0.00144863 Jy ! Component: 150 - total flux cleaned = 0.00163861 Jy ! Component: 200 - total flux cleaned = 0.00186699 Jy ! Total flux subtracted in 200 components = 0.00186699 Jy ! Clean residual min=-0.000683 max=0.000862 Jy/beam ! Clean residual mean=0.000006 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0953631 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 409 components and 0.0953631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073557Jy sigma=1.106688 ! Fit after self-cal, rms=0.073430Jy sigma=1.106475 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=5.41 mas, bpa=24.67 degrees ! Estimated noise=0.18816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.195 x 5.41 at 24.67 degrees (North through East) ! Clean map min=-0.0029988 max=0.042915 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.542 mas, bmaj=4.993 mas, bpa=25.6 degrees ! Estimated noise=0.741936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292252 Jy ! Component: 100 - total flux cleaned = 0.0404812 Jy ! Component: 150 - total flux cleaned = 0.0473882 Jy ! Component: 200 - total flux cleaned = 0.0519733 Jy ! Total flux subtracted in 200 components = 0.0519733 Jy ! Clean residual min=-0.005302 max=0.004835 Jy/beam ! Clean residual mean=0.000009 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.0519733 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0519733 Jy ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=5.41 mas, bpa=24.67 degrees ! Estimated noise=0.18816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826959 Jy ! Component: 100 - total flux cleaned = 0.0128969 Jy ! Component: 150 - total flux cleaned = 0.0156196 Jy ! Component: 200 - total flux cleaned = 0.0183228 Jy ! Total flux subtracted in 200 components = 0.0183228 Jy ! Clean residual min=-0.003088 max=0.003208 Jy/beam ! Clean residual mean=-0.000006 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.0702961 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 88 components and 0.070296 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=5.514 mas, bpa=23.41 degrees ! Estimated noise=0.189808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031615 Jy ! Component: 100 - total flux cleaned = 0.00494962 Jy ! Component: 150 - total flux cleaned = 0.00652671 Jy ! Component: 200 - total flux cleaned = 0.00766276 Jy ! Total flux subtracted in 200 components = 0.00766276 Jy ! Clean residual min=-0.002357 max=0.002044 Jy/beam ! Clean residual mean=0.000008 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0779588 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101804 Jy ! Component: 100 - total flux cleaned = 0.00200616 Jy ! Component: 150 - total flux cleaned = 0.00277796 Jy ! Component: 200 - total flux cleaned = 0.00348099 Jy ! Total flux subtracted in 200 components = 0.00348099 Jy ! Clean residual min=-0.001849 max=0.001507 Jy/beam ! Clean residual mean=0.000017 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0814398 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 156 components and 0.0814398 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=5.41 mas, bpa=24.67 degrees ! Estimated noise=0.18816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823754 Jy ! Component: 100 - total flux cleaned = 0.00123174 Jy ! Component: 150 - total flux cleaned = 0.00151244 Jy ! Component: 200 - total flux cleaned = 0.00190634 Jy ! Total flux subtracted in 200 components = 0.00190634 Jy ! Clean residual min=-0.001591 max=0.001297 Jy/beam ! Clean residual mean=0.000016 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0833461 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 196 components and 0.0833461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073521Jy sigma=1.109407 ! Fit after self-cal, rms=0.073506Jy sigma=1.108522 wmodel J1638+6234_X_a_map.mod ! Writing 196 model components to file: J1638+6234_X_a_map.mod wobs J1638+6234_X_a_uvs.fits ! Writing UV FITS file: J1638+6234_X_a_uvs.fits wwins J1638+6234_X_a_map.win ! wwins: Wrote 7 windows to J1638+6234_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034308 Jy ! Component: 100 - total flux cleaned = -0.000384851 Jy ! Component: 150 - total flux cleaned = -0.000442033 Jy ! Component: 200 - total flux cleaned = -0.000496279 Jy ! Component: 250 - total flux cleaned = -0.000513707 Jy ! Component: 300 - total flux cleaned = -0.000415477 Jy ! Component: 350 - total flux cleaned = -0.000337211 Jy ! Component: 400 - total flux cleaned = -0.000307264 Jy ! Component: 450 - total flux cleaned = -0.000248804 Jy ! Component: 500 - total flux cleaned = -0.00019216 Jy ! Component: 550 - total flux cleaned = -0.000123354 Jy ! Component: 600 - total flux cleaned = 9.98545e-06 Jy ! Component: 650 - total flux cleaned = 0.000165884 Jy ! Component: 700 - total flux cleaned = 0.000331268 Jy ! Component: 750 - total flux cleaned = 0.000492452 Jy ! Component: 800 - total flux cleaned = 0.000638168 Jy ! Component: 850 - total flux cleaned = 0.000780669 Jy ! Component: 900 - total flux cleaned = 0.000943021 Jy ! Component: 950 - total flux cleaned = 0.00110201 Jy ! Component: 1000 - total flux cleaned = 0.00125777 Jy ! Component: 1050 - total flux cleaned = 0.00140026 Jy ! Component: 1100 - total flux cleaned = 0.0015728 Jy ! Component: 1150 - total flux cleaned = 0.00172134 Jy ! Component: 1200 - total flux cleaned = 0.00184652 Jy ! Component: 1250 - total flux cleaned = 0.0019596 Jy ! Component: 1300 - total flux cleaned = 0.00208105 Jy ! Component: 1350 - total flux cleaned = 0.00221093 Jy ! Component: 1400 - total flux cleaned = 0.00231932 Jy ! Component: 1450 - total flux cleaned = 0.00247465 Jy ! Component: 1500 - total flux cleaned = 0.00257035 Jy ! Component: 1550 - total flux cleaned = 0.00268393 Jy ! Component: 1600 - total flux cleaned = 0.00280548 Jy ! Component: 1650 - total flux cleaned = 0.00288858 Jy ! Component: 1700 - total flux cleaned = 0.0029801 Jy ! Component: 1750 - total flux cleaned = 0.00308871 Jy ! Component: 1800 - total flux cleaned = 0.00318719 Jy ! Component: 1850 - total flux cleaned = 0.00327577 Jy ! Component: 1900 - total flux cleaned = 0.00336339 Jy ! Component: 1950 - total flux cleaned = 0.00342416 Jy ! Component: 2000 - total flux cleaned = 0.00349307 Jy ! Component: 2050 - total flux cleaned = 0.00353581 Jy ! Component: 2100 - total flux cleaned = 0.00362059 Jy ! Component: 2150 - total flux cleaned = 0.00368786 Jy ! Component: 2200 - total flux cleaned = 0.00378789 Jy ! Component: 2250 - total flux cleaned = 0.00385404 Jy ! Component: 2300 - total flux cleaned = 0.00391969 Jy ! Component: 2350 - total flux cleaned = 0.00396864 Jy ! Component: 2400 - total flux cleaned = 0.0040576 Jy ! Component: 2450 - total flux cleaned = 0.00413776 Jy ! Component: 2500 - total flux cleaned = 0.00418547 Jy ! Component: 2550 - total flux cleaned = 0.0042408 Jy ! Component: 2600 - total flux cleaned = 0.00431936 Jy ! Component: 2650 - total flux cleaned = 0.00439739 Jy ! Component: 2700 - total flux cleaned = 0.00444391 Jy ! Component: 2750 - total flux cleaned = 0.00452112 Jy ! Component: 2800 - total flux cleaned = 0.00459786 Jy ! Component: 2850 - total flux cleaned = 0.00466659 Jy ! Component: 2900 - total flux cleaned = 0.00475012 Jy ! Component: 2950 - total flux cleaned = 0.00481065 Jy ! Component: 3000 - total flux cleaned = 0.00488597 Jy ! Component: 3050 - total flux cleaned = 0.00492346 Jy ! Component: 3100 - total flux cleaned = 0.00499821 Jy ! Component: 3150 - total flux cleaned = 0.00505038 Jy ! Component: 3200 - total flux cleaned = 0.00513206 Jy ! Component: 3250 - total flux cleaned = 0.00518384 Jy ! Component: 3300 - total flux cleaned = 0.00525762 Jy ! Component: 3350 - total flux cleaned = 0.00531639 Jy ! Component: 3400 - total flux cleaned = 0.00539697 Jy ! Component: 3450 - total flux cleaned = 0.00546999 Jy ! Component: 3500 - total flux cleaned = 0.0055501 Jy ! Component: 3550 - total flux cleaned = 0.00564453 Jy ! Component: 3600 - total flux cleaned = 0.00572418 Jy ! Component: 3650 - total flux cleaned = 0.00581088 Jy ! Component: 3700 - total flux cleaned = 0.00589022 Jy ! Component: 3750 - total flux cleaned = 0.00597656 Jy ! Component: 3800 - total flux cleaned = 0.00605559 Jy ! Component: 3850 - total flux cleaned = 0.00615598 Jy ! Component: 3900 - total flux cleaned = 0.00622047 Jy ! Component: 3950 - total flux cleaned = 0.00629914 Jy ! Component: 4000 - total flux cleaned = 0.00636346 Jy ! Component: 4050 - total flux cleaned = 0.00645627 Jy ! Total flux subtracted in 4096 components = 0.0065134 Jy ! Clean residual min=-0.000443 max=0.000414 Jy/beam ! Clean residual mean=0.000008 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0898595 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 457 components and 0.0898595 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1638+6234_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.195 x 5.41 at 24.67 degrees (North through East) ! Clean map min=-0.0026162 max=0.043108 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1638+6234_X_a_map.fits wmodel /vlbi/uf001/uvm//J1638+6234_X_a_map.mod ! Writing 457 model components to file: /vlbi/uf001/uvm//J1638+6234_X_a_map.mod wobs /vlbi/uf001/uvm//J1638+6234_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1638+6234_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1638+6234_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J1638+6234_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0431079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136512 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.950023 0.950023 1.90005 3.80009 7.60019 15.2004 30.4007 60.8015 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.043 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 315.781 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1638+6234_X_a_dfm.log closed on Sun Jan 13 22:02:52 2019