! Started logfile: /vlbi/uf001/uva//J1630+0701_X_dfm.log on Mon Jan 14 03:44:01 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1630+0701_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1630+0701_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.851072 visibilities/baseline/integration-bin.
! Found source: J1630+0701
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26196 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1630+0701_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011474Jy  sigma=25.232572
! Fit after  self-cal, rms=0.852844Jy  sigma=21.208086
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7135 mas, bmaj=1.762 mas, bpa=-5.895 degrees
! Estimated noise=0.327517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109664 Jy
! Component: 100  -  total flux cleaned = 0.140181 Jy
! Total flux subtracted in 100 components = 0.140181 Jy
! Clean residual min=-0.005628 max=0.013098 Jy/beam
! Clean residual mean=-0.000011 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.140181 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.140181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066729Jy  sigma=1.552435
! Fit after  self-cal, rms=0.066712Jy  sigma=1.551896
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147687 Jy
! Component: 100  -  total flux cleaned = 0.022842 Jy
! Total flux subtracted in 100 components = 0.022842 Jy
! Clean residual min=-0.004750 max=0.005490 Jy/beam
! Clean residual mean=-0.000006 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.163023 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.163023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062694Jy  sigma=1.423948
! Fit after  self-cal, rms=0.062695Jy  sigma=1.423478
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9386 mas, bmaj=2.047 mas, bpa=-5.245 degrees
! Estimated noise=0.180934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806679 Jy
! Component: 100  -  total flux cleaned = 0.0132001 Jy
! Component: 150  -  total flux cleaned = 0.0155389 Jy
! Component: 200  -  total flux cleaned = 0.0174217 Jy
! Total flux subtracted in 200 components = 0.0174217 Jy
! Clean residual min=-0.004837 max=0.004283 Jy/beam
! Clean residual mean=-0.000000 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.180445 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 57 components and 0.180445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061651Jy  sigma=1.385329
! Fit after  self-cal, rms=0.061638Jy  sigma=1.384671
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9386 x 2.047 at -5.245 degrees (North through East)
! Clean map  min=-0.0046147  max=0.14826 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        1.02     KP        1.12     
!   LA        0.87     MK        1.03     NL        1.03     OV        0.96     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        1.02     KP        1.09     
!   LA        0.86     MK        1.05     NL        1.03     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.08     HN        1.01     KP        1.07     
!   LA        0.86     MK        1.03     NL        1.04     OV        0.96     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.08     HN        1.03     KP        1.11     
!   LA        0.87     MK        1.01     NL        1.04     OV        0.96     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.05     HN        1.01     KP        1.10     
!   LA        0.86     MK        0.99     NL        1.02     OV        0.96     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        0.99     KP        1.10     
!   LA        0.88     MK        1.03     NL        1.02     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        1.02     KP        1.12     
!   LA        0.84     MK        1.00     NL        1.05     OV        0.97     
!   PT        0.94     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.06     HN        0.99     KP        1.10     
!   LA        0.85     MK        0.99     NL        1.03     OV        0.97     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.06     HN        0.99     KP        1.09     
!   LA        0.82     MK        1.01     NL        1.03     OV        0.96     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.03     KP        1.09     
!   LA        0.85     MK        0.97     NL        1.04     OV        0.97     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.00     KP        1.12     
!   LA        0.85     MK        0.99     NL        1.02     OV        0.95     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.05     HN        1.01     KP        1.07     
!   LA        0.85     MK        0.99     NL        1.04     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061638Jy  sigma=1.384671
! Fit after  self-cal, rms=0.059313Jy  sigma=1.325159
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=2.062 mas, bpa=-4.989 degrees
! Estimated noise=0.180001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000786909 Jy
! Component: 100  -  total flux cleaned = 0.00112177 Jy
! Component: 150  -  total flux cleaned = 0.000946767 Jy
! Component: 200  -  total flux cleaned = 0.000792713 Jy
! Total flux subtracted in 200 components = 0.000792713 Jy
! Clean residual min=-0.001642 max=0.001492 Jy/beam
! Clean residual mean=0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.181238 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 0.181238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059187Jy  sigma=1.322858
! Fit after  self-cal, rms=0.059267Jy  sigma=1.322226
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059267Jy  sigma=1.322226
! Fit after  self-cal, rms=0.059549Jy  sigma=1.318576
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9367 mas, bmaj=2.07 mas, bpa=-5.173 degrees
! Estimated noise=0.179863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.41522e-05 Jy
! Component: 100  -  total flux cleaned = -0.000149818 Jy
! Component: 150  -  total flux cleaned = -0.000214893 Jy
! Component: 200  -  total flux cleaned = -0.000216648 Jy
! Total flux subtracted in 200 components = -0.000216648 Jy
! Clean residual min=-0.001391 max=0.001352 Jy/beam
! Clean residual mean=-0.000000 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.181021 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 89 components and 0.181021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059499Jy  sigma=1.317647
! Fit after  self-cal, rms=0.059506Jy  sigma=1.317567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.44961e-05 Jy
! Component: 100  -  total flux cleaned = 1.17736e-05 Jy
! Component: 150  -  total flux cleaned = -1.40236e-05 Jy
! Component: 200  -  total flux cleaned = -5.83595e-05 Jy
! Total flux subtracted in 200 components = -5.83595e-05 Jy
! Clean residual min=-0.001331 max=0.001354 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.180963 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 96 components and 0.180963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059480Jy  sigma=1.317150
! Fit after  self-cal, rms=0.059478Jy  sigma=1.317124
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059478Jy  sigma=1.317124
! Fit after  self-cal, rms=0.059503Jy  sigma=1.311950
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9376 mas, bmaj=2.074 mas, bpa=-5.294 degrees
! Estimated noise=0.17989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000228283 Jy
! Component: 100  -  total flux cleaned = -0.000254175 Jy
! Component: 150  -  total flux cleaned = -0.000276638 Jy
! Component: 200  -  total flux cleaned = -0.000297246 Jy
! Total flux subtracted in 200 components = -0.000297246 Jy
! Clean residual min=-0.001086 max=0.001060 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.180665 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 106 components and 0.180665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059482Jy  sigma=1.311582
! Fit after  self-cal, rms=0.059487Jy  sigma=1.311538
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.66609e-05 Jy
! Component: 100  -  total flux cleaned = -2.70867e-05 Jy
! Component: 150  -  total flux cleaned = -1.09979e-05 Jy
! Component: 200  -  total flux cleaned = -2.66336e-05 Jy
! Total flux subtracted in 200 components = -2.66336e-05 Jy
! Clean residual min=-0.001054 max=0.001050 Jy/beam
! Clean residual mean=-0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.180639 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.180639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059475Jy  sigma=1.311365
! Fit after  self-cal, rms=0.059474Jy  sigma=1.311359
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059474Jy  sigma=1.311359
! Fit after  self-cal, rms=0.059531Jy  sigma=1.311264
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.163 mas, bpa=2.107 degrees
! Estimated noise=0.214517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249869 Jy
! Component: 100  -  total flux cleaned = -0.000295645 Jy
! Component: 150  -  total flux cleaned = -0.000335781 Jy
! Component: 200  -  total flux cleaned = -0.000359089 Jy
! Total flux subtracted in 200 components = -0.000359089 Jy
! Clean residual min=-0.001219 max=0.001125 Jy/beam
! Clean residual mean=-0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.18028 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 123 components and 0.18028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059525Jy  sigma=1.311142
! Fit after  self-cal, rms=0.059528Jy  sigma=1.311135
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47173e-05 Jy
! Component: 100  -  total flux cleaned = 4.01062e-06 Jy
! Component: 150  -  total flux cleaned = -1.55228e-05 Jy
! Component: 200  -  total flux cleaned = -1.52214e-05 Jy
! Total flux subtracted in 200 components = -1.52214e-05 Jy
! Clean residual min=-0.001202 max=0.001114 Jy/beam
! Clean residual mean=-0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.180264 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 0.180264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059523Jy  sigma=1.311087
! Fit after  self-cal, rms=0.059523Jy  sigma=1.311074
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9373 mas, bmaj=2.076 mas, bpa=-5.351 degrees
! Estimated noise=0.179809 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9373 x 2.076 at -5.351 degrees (North through East)
! Clean map  min=-0.00090978  max=0.1479 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7095 mas, bmaj=1.781 mas, bpa=-5.926 degrees
! Estimated noise=0.327225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109414 Jy
! Component: 100  -  total flux cleaned = 0.140626 Jy
! Component: 150  -  total flux cleaned = 0.155713 Jy
! Component: 200  -  total flux cleaned = 0.163678 Jy
! Total flux subtracted in 200 components = 0.163678 Jy
! Clean residual min=-0.002431 max=0.003787 Jy/beam
! Clean residual mean=-0.000004 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.163678 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.163678 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9373 mas, bmaj=2.076 mas, bpa=-5.351 degrees
! Estimated noise=0.179809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513147 Jy
! Component: 100  -  total flux cleaned = 0.0081194 Jy
! Component: 150  -  total flux cleaned = 0.0101998 Jy
! Component: 200  -  total flux cleaned = 0.0117074 Jy
! Total flux subtracted in 200 components = 0.0117074 Jy
! Clean residual min=-0.001048 max=0.001164 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.175385 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 49 components and 0.175385 Jy
! Inverting map 
! Added new window around map position (-1, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012392 Jy
! Component: 100  -  total flux cleaned = 0.00211905 Jy
! Component: 150  -  total flux cleaned = 0.00256838 Jy
! Component: 200  -  total flux cleaned = 0.00287648 Jy
! Total flux subtracted in 200 components = 0.00287648 Jy
! Clean residual min=-0.000951 max=0.001060 Jy/beam
! Clean residual mean=-0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.178262 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 0.178262 Jy
! Inverting map 
! Added new window around map position (-44.2, -40.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685917 Jy
! Component: 100  -  total flux cleaned = 0.000903801 Jy
! Component: 150  -  total flux cleaned = 0.00105793 Jy
! Component: 200  -  total flux cleaned = 0.00122188 Jy
! Total flux subtracted in 200 components = 0.00122188 Jy
! Clean residual min=-0.000937 max=0.000955 Jy/beam
! Clean residual mean=-0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.179484 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 83 components and 0.179484 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.163 mas, bpa=2.107 degrees
! Estimated noise=0.214517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395835 Jy
! Component: 100  -  total flux cleaned = 0.000442247 Jy
! Component: 150  -  total flux cleaned = 0.000469971 Jy
! Component: 200  -  total flux cleaned = 0.000494324 Jy
! Total flux subtracted in 200 components = 0.000494324 Jy
! Clean residual min=-0.001079 max=0.001043 Jy/beam
! Clean residual mean=-0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.179978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09618e-05 Jy
! Component: 100  -  total flux cleaned = 1.51595e-06 Jy
! Component: 150  -  total flux cleaned = 1.07524e-05 Jy
! Component: 200  -  total flux cleaned = -6.84716e-06 Jy
! Total flux subtracted in 200 components = -6.84716e-06 Jy
! Clean residual min=-0.001098 max=0.001031 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.179971 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 124 components and 0.179971 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9373 mas, bmaj=2.076 mas, bpa=-5.351 degrees
! Estimated noise=0.179809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.61404e-05 Jy
! Component: 100  -  total flux cleaned = 0.000160514 Jy
! Component: 150  -  total flux cleaned = 0.000239823 Jy
! Component: 200  -  total flux cleaned = 0.000300557 Jy
! Total flux subtracted in 200 components = 0.000300557 Jy
! Clean residual min=-0.000907 max=0.000945 Jy/beam
! Clean residual mean=-0.000000 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.180272 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 142 components and 0.180272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059500Jy  sigma=1.310479
! Fit after  self-cal, rms=0.059489Jy  sigma=1.310386
wmodel J1630+0701_X_map.mod
! Writing 142 model components to file: J1630+0701_X_map.mod
wobs   J1630+0701_X_uvs.fits
! Writing UV FITS file: J1630+0701_X_uvs.fits
wwins  J1630+0701_X_map.win
! wwins: Wrote 5 windows to J1630+0701_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178166 Jy
! Component: 100  -  total flux cleaned = 0.000322103 Jy
! Component: 150  -  total flux cleaned = 0.00039756 Jy
! Component: 200  -  total flux cleaned = 0.000499598 Jy
! Component: 250  -  total flux cleaned = 0.000598629 Jy
! Component: 300  -  total flux cleaned = 0.000653939 Jy
! Component: 350  -  total flux cleaned = 0.0007482 Jy
! Component: 400  -  total flux cleaned = 0.000826868 Jy
! Component: 450  -  total flux cleaned = 0.000840028 Jy
! Component: 500  -  total flux cleaned = 0.000852778 Jy
! Component: 550  -  total flux cleaned = 0.000840358 Jy
! Component: 600  -  total flux cleaned = 0.000804054 Jy
! Component: 650  -  total flux cleaned = 0.000840363 Jy
! Component: 700  -  total flux cleaned = 0.000875948 Jy
! Component: 750  -  total flux cleaned = 0.000910944 Jy
! Component: 800  -  total flux cleaned = 0.00093406 Jy
! Component: 850  -  total flux cleaned = 0.000945501 Jy
! Component: 900  -  total flux cleaned = 0.000956784 Jy
! Component: 950  -  total flux cleaned = 0.000956849 Jy
! Component: 1000  -  total flux cleaned = 0.000968062 Jy
! Component: 1050  -  total flux cleaned = 0.000968199 Jy
! Component: 1100  -  total flux cleaned = 0.000989817 Jy
! Component: 1150  -  total flux cleaned = 0.00100047 Jy
! Component: 1200  -  total flux cleaned = 0.00100043 Jy
! Component: 1250  -  total flux cleaned = 0.00101069 Jy
! Component: 1300  -  total flux cleaned = 0.00100014 Jy
! Component: 1350  -  total flux cleaned = 0.000979389 Jy
! Component: 1400  -  total flux cleaned = 0.0010308 Jy
! Component: 1450  -  total flux cleaned = 0.00106127 Jy
! Component: 1500  -  total flux cleaned = 0.00107116 Jy
! Component: 1550  -  total flux cleaned = 0.00105123 Jy
! Component: 1600  -  total flux cleaned = 0.00106116 Jy
! Component: 1650  -  total flux cleaned = 0.00110063 Jy
! Component: 1700  -  total flux cleaned = 0.00107127 Jy
! Component: 1750  -  total flux cleaned = 0.00110047 Jy
! Component: 1800  -  total flux cleaned = 0.00110051 Jy
! Component: 1850  -  total flux cleaned = 0.00110057 Jy
! Component: 1900  -  total flux cleaned = 0.00113865 Jy
! Component: 1950  -  total flux cleaned = 0.00111961 Jy
! Component: 2000  -  total flux cleaned = 0.00111971 Jy
! Component: 2050  -  total flux cleaned = 0.00111051 Jy
! Component: 2100  -  total flux cleaned = 0.00111048 Jy
! Component: 2150  -  total flux cleaned = 0.00117477 Jy
! Component: 2200  -  total flux cleaned = 0.0011199 Jy
! Component: 2250  -  total flux cleaned = 0.0011109 Jy
! Component: 2300  -  total flux cleaned = 0.00110176 Jy
! Component: 2350  -  total flux cleaned = 0.00111078 Jy
! Component: 2400  -  total flux cleaned = 0.00112852 Jy
! Component: 2450  -  total flux cleaned = 0.00108439 Jy
! Component: 2500  -  total flux cleaned = 0.00111074 Jy
! Component: 2550  -  total flux cleaned = 0.00107581 Jy
! Component: 2600  -  total flux cleaned = 0.00106714 Jy
! Component: 2650  -  total flux cleaned = 0.00106717 Jy
! Component: 2700  -  total flux cleaned = 0.00104144 Jy
! Component: 2750  -  total flux cleaned = 0.00104142 Jy
! Component: 2800  -  total flux cleaned = 0.00106695 Jy
! Component: 2850  -  total flux cleaned = 0.00104169 Jy
! Component: 2900  -  total flux cleaned = 0.00101657 Jy
! Component: 2950  -  total flux cleaned = 0.00100824 Jy
! Component: 3000  -  total flux cleaned = 0.00103308 Jy
! Component: 3050  -  total flux cleaned = 0.00100835 Jy
! Component: 3100  -  total flux cleaned = 0.00100016 Jy
! Component: 3150  -  total flux cleaned = 0.00102467 Jy
! Component: 3200  -  total flux cleaned = 0.00103278 Jy
! Component: 3250  -  total flux cleaned = 0.000984405 Jy
! Component: 3300  -  total flux cleaned = 0.00100847 Jy
! Component: 3350  -  total flux cleaned = 0.000960541 Jy
! Component: 3400  -  total flux cleaned = 0.000968468 Jy
! Component: 3450  -  total flux cleaned = 0.000992156 Jy
! Component: 3500  -  total flux cleaned = 0.000960703 Jy
! Component: 3550  -  total flux cleaned = 0.000945029 Jy
! Component: 3600  -  total flux cleaned = 0.0008983 Jy
! Component: 3650  -  total flux cleaned = 0.000882826 Jy
! Component: 3700  -  total flux cleaned = 0.000844203 Jy
! Component: 3750  -  total flux cleaned = 0.00082122 Jy
! Component: 3800  -  total flux cleaned = 0.000775416 Jy
! Component: 3850  -  total flux cleaned = 0.000767792 Jy
! Component: 3900  -  total flux cleaned = 0.000737492 Jy
! Component: 3950  -  total flux cleaned = 0.000714837 Jy
! Component: 4000  -  total flux cleaned = 0.000654859 Jy
! Component: 4050  -  total flux cleaned = 0.000632414 Jy
! Total flux subtracted in 4096 components = 0.000595221 Jy
! Clean residual min=-0.000491 max=0.000425 Jy/beam
! Clean residual mean=-0.000000 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.180867 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 441 components and 0.180867 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1630+0701_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9373 x 2.076 at -5.351 degrees (North through East)
! Clean map  min=-0.00077026  max=0.1487 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1630+0701_X_map.fits
wmodel /vlbi/uf001/uva//J1630+0701_X_map.mod
! Writing 441 model components to file: /vlbi/uf001/uva//J1630+0701_X_map.mod
wobs   /vlbi/uf001/uva//J1630+0701_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1630+0701_X_uvs.fits
wwins  /vlbi/uf001/uva//J1630+0701_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1630+0701_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.148698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000128 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.258241 0.258241 0.516482 1.03296 2.06593 4.13185 8.26371 16.5274 33.0548 66.1097
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.148 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1161.71 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1630+0701_X_dfm.log closed on Mon Jan 14 03:44:06 2019