! Started logfile: /vlbi/uf001/uva//J1630+0015_S_dfm.log on Mon Jan 14 03:43:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1630+0015_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1630+0015_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99961 visibilities/baseline/integration-bin. ! Found source: J1630+0015 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7692 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1630+0015_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.002307Jy sigma=21.987462 ! Fit after self-cal, rms=0.947654Jy sigma=20.798342 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.99 mas, bpa=-4.192 degrees ! Estimated noise=0.483849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430338 Jy ! Component: 100 - total flux cleaned = 0.0524231 Jy ! Total flux subtracted in 100 components = 0.0524231 Jy ! Clean residual min=-0.003260 max=0.002764 Jy/beam ! Clean residual mean=0.000006 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0524231 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0524231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067242Jy sigma=1.365114 ! Fit after self-cal, rms=0.066083Jy sigma=1.341192 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=7.831 mas, bpa=-2.994 degrees ! Estimated noise=0.378273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309054 Jy ! Component: 100 - total flux cleaned = 0.00380729 Jy ! Component: 150 - total flux cleaned = 0.00386855 Jy ! Component: 200 - total flux cleaned = 0.00388628 Jy ! Total flux subtracted in 200 components = 0.00388628 Jy ! Clean residual min=-0.001966 max=0.002458 Jy/beam ! Clean residual mean=0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0563094 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0563094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065966Jy sigma=1.337992 ! Fit after self-cal, rms=0.065911Jy sigma=1.336830 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.393 x 7.831 at -2.994 degrees (North through East) ! Clean map min=-0.0017995 max=0.056327 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.07 KP 1.04 ! LA 0.93 MK 0.95 NL 1.05 OV 1.02 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.06 KP 1.06 ! LA 0.92 MK 0.96 NL 0.98 OV 0.96 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.17 KP 1.11 ! LA 0.95 MK 1.03 NL 1.00 OV 0.97 ! PT 0.99 SC 0.94 ! ! ! Fit before self-cal, rms=0.065911Jy sigma=1.336830 ! Fit after self-cal, rms=0.067121Jy sigma=1.334074 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=7.849 mas, bpa=-2.947 degrees ! Estimated noise=0.377183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-71.5, 120). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954219 Jy ! Component: 100 - total flux cleaned = 0.000644782 Jy ! Component: 150 - total flux cleaned = 0.00031415 Jy ! Component: 200 - total flux cleaned = 6.69805e-05 Jy ! Total flux subtracted in 200 components = 6.69805e-05 Jy ! Clean residual min=-0.001678 max=0.002340 Jy/beam ! Clean residual mean=0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0563763 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0563763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067042Jy sigma=1.332322 ! Fit after self-cal, rms=0.067092Jy sigma=1.331860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067092Jy sigma=1.331860 ! Fit after self-cal, rms=0.067951Jy sigma=1.329399 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=7.853 mas, bpa=-2.898 degrees ! Estimated noise=0.378479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103109 Jy ! Component: 100 - total flux cleaned = -6.41171e-05 Jy ! Component: 150 - total flux cleaned = -0.000209632 Jy ! Component: 200 - total flux cleaned = -0.000316985 Jy ! Total flux subtracted in 200 components = -0.000316985 Jy ! Clean residual min=-0.001639 max=0.002214 Jy/beam ! Clean residual mean=0.000003 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0560593 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.0560594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067928Jy sigma=1.328973 ! Fit after self-cal, rms=0.067945Jy sigma=1.328758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50, -121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129908 Jy ! Component: 100 - total flux cleaned = 0.00163018 Jy ! Component: 150 - total flux cleaned = 0.00185794 Jy ! Component: 200 - total flux cleaned = 0.00188854 Jy ! Total flux subtracted in 200 components = 0.00188854 Jy ! Clean residual min=-0.001661 max=0.001705 Jy/beam ! Clean residual mean=0.000002 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0579479 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0579479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067885Jy sigma=1.327387 ! Fit after self-cal, rms=0.067884Jy sigma=1.327244 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067884Jy sigma=1.327244 ! Fit after self-cal, rms=0.067964Jy sigma=1.325658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=7.839 mas, bpa=-2.724 degrees ! Estimated noise=0.37756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440234 Jy ! Component: 100 - total flux cleaned = 0.000390261 Jy ! Component: 150 - total flux cleaned = 0.000345643 Jy ! Component: 200 - total flux cleaned = 0.000304464 Jy ! Total flux subtracted in 200 components = 0.000304464 Jy ! Clean residual min=-0.001590 max=0.001602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0582524 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 79 components and 0.0582524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067944Jy sigma=1.325263 ! Fit after self-cal, rms=0.067961Jy sigma=1.325121 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.05089e-05 Jy ! Component: 100 - total flux cleaned = -9.81695e-05 Jy ! Component: 150 - total flux cleaned = -0.000133723 Jy ! Component: 200 - total flux cleaned = -0.000166623 Jy ! Total flux subtracted in 200 components = -0.000166623 Jy ! Clean residual min=-0.001590 max=0.001572 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0580857 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.0580858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067950Jy sigma=1.324934 ! Fit after self-cal, rms=0.067949Jy sigma=1.324922 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067949Jy sigma=1.324922 ! Fit after self-cal, rms=0.067897Jy sigma=1.324876 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=12.36 mas, bpa=2.636 degrees ! Estimated noise=0.460608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.13763e-05 Jy ! Component: 100 - total flux cleaned = -0.000141188 Jy ! Component: 150 - total flux cleaned = -0.000173334 Jy ! Component: 200 - total flux cleaned = -0.000216023 Jy ! Total flux subtracted in 200 components = -0.000216023 Jy ! Clean residual min=-0.001778 max=0.001629 Jy/beam ! Clean residual mean=-0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0578697 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.0578697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067897Jy sigma=1.324810 ! Fit after self-cal, rms=0.067893Jy sigma=1.324775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112558 Jy ! Component: 100 - total flux cleaned = -0.000112641 Jy ! Component: 150 - total flux cleaned = -0.000136815 Jy ! Component: 200 - total flux cleaned = -0.000148065 Jy ! Total flux subtracted in 200 components = -0.000148065 Jy ! Clean residual min=-0.001810 max=0.001615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0577217 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.0577217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067894Jy sigma=1.324787 ! Fit after self-cal, rms=0.067891Jy sigma=1.324774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.834 mas, bpa=-2.586 degrees ! Estimated noise=0.376412 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.834 at -2.586 degrees (North through East) ! Clean map min=-0.0015484 max=0.056092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=6.982 mas, bpa=-3.874 degrees ! Estimated noise=0.481355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438754 Jy ! Component: 100 - total flux cleaned = 0.0535023 Jy ! Component: 150 - total flux cleaned = 0.0563102 Jy ! Component: 200 - total flux cleaned = 0.057013 Jy ! Total flux subtracted in 200 components = 0.057013 Jy ! Clean residual min=-0.002303 max=0.002507 Jy/beam ! Clean residual mean=0.000003 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.057013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.057013 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.834 mas, bpa=-2.586 degrees ! Estimated noise=0.376412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919864 Jy ! Component: 100 - total flux cleaned = 0.00114855 Jy ! Component: 150 - total flux cleaned = 0.00119369 Jy ! Component: 200 - total flux cleaned = 0.00119253 Jy ! Total flux subtracted in 200 components = 0.00119253 Jy ! Clean residual min=-0.001640 max=0.001691 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0582055 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.0582055 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=12.36 mas, bpa=2.636 degrees ! Estimated noise=0.460608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224332 Jy ! Component: 100 - total flux cleaned = -0.000287101 Jy ! Component: 150 - total flux cleaned = -0.000340873 Jy ! Component: 200 - total flux cleaned = -0.00034003 Jy ! Total flux subtracted in 200 components = -0.00034003 Jy ! Clean residual min=-0.001742 max=0.001602 Jy/beam ! Clean residual mean=-0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0578655 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.05746e-05 Jy ! Component: 100 - total flux cleaned = -3.95997e-05 Jy ! Component: 150 - total flux cleaned = -3.97409e-05 Jy ! Component: 200 - total flux cleaned = -5.68979e-05 Jy ! Total flux subtracted in 200 components = -5.68979e-05 Jy ! Clean residual min=-0.001753 max=0.001584 Jy/beam ! Clean residual mean=-0.000003 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0578086 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 75 components and 0.0578086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.834 mas, bpa=-2.586 degrees ! Estimated noise=0.376412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.23383e-05 Jy ! Component: 100 - total flux cleaned = 0.000125764 Jy ! Component: 150 - total flux cleaned = 0.000180732 Jy ! Component: 200 - total flux cleaned = 0.000131 Jy ! Total flux subtracted in 200 components = 0.000131 Jy ! Clean residual min=-0.001598 max=0.001537 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0579396 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.0579396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067914Jy sigma=1.325146 ! Fit after self-cal, rms=0.067918Jy sigma=1.325111 wmodel J1630+0015_S_map.mod ! Writing 87 model components to file: J1630+0015_S_map.mod wobs J1630+0015_S_uvs.fits ! Writing UV FITS file: J1630+0015_S_uvs.fits wwins J1630+0015_S_map.win ! wwins: Wrote 3 windows to J1630+0015_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012621 Jy ! Component: 100 - total flux cleaned = 4.44641e-05 Jy ! Component: 150 - total flux cleaned = 9.94239e-05 Jy ! Component: 200 - total flux cleaned = 0.000179729 Jy ! Component: 250 - total flux cleaned = 0.000205805 Jy ! Component: 300 - total flux cleaned = 0.000105515 Jy ! Component: 350 - total flux cleaned = 8.11038e-06 Jy ! Component: 400 - total flux cleaned = -6.31509e-05 Jy ! Component: 450 - total flux cleaned = -8.60723e-05 Jy ! Component: 500 - total flux cleaned = -1.74265e-05 Jy ! Component: 550 - total flux cleaned = 4.80859e-06 Jy ! Component: 600 - total flux cleaned = 2.65786e-05 Jy ! Component: 650 - total flux cleaned = 5.09e-06 Jy ! Component: 700 - total flux cleaned = 5.43081e-06 Jy ! Component: 750 - total flux cleaned = 5.56172e-06 Jy ! Component: 800 - total flux cleaned = 2.6084e-05 Jy ! Component: 850 - total flux cleaned = -5.50425e-05 Jy ! Component: 900 - total flux cleaned = -7.49842e-05 Jy ! Component: 950 - total flux cleaned = -3.55987e-05 Jy ! Component: 1000 - total flux cleaned = -7.41491e-05 Jy ! Component: 1050 - total flux cleaned = -0.000131766 Jy ! Component: 1100 - total flux cleaned = -0.000188288 Jy ! Component: 1150 - total flux cleaned = -0.000225615 Jy ! Component: 1200 - total flux cleaned = -0.000262609 Jy ! Component: 1250 - total flux cleaned = -0.00028093 Jy ! Component: 1300 - total flux cleaned = -0.000389614 Jy ! Component: 1350 - total flux cleaned = -0.000478664 Jy ! Component: 1400 - total flux cleaned = -0.000461184 Jy ! Component: 1450 - total flux cleaned = -0.000513738 Jy ! Component: 1500 - total flux cleaned = -0.00054856 Jy ! Component: 1550 - total flux cleaned = -0.000634253 Jy ! Component: 1600 - total flux cleaned = -0.000634305 Jy ! Component: 1650 - total flux cleaned = -0.000684892 Jy ! Component: 1700 - total flux cleaned = -0.000701567 Jy ! Component: 1750 - total flux cleaned = -0.000767691 Jy ! Component: 1800 - total flux cleaned = -0.00076792 Jy ! Component: 1850 - total flux cleaned = -0.000897865 Jy ! Component: 1900 - total flux cleaned = -0.000946068 Jy ! Component: 1950 - total flux cleaned = -0.00097772 Jy ! Component: 2000 - total flux cleaned = -0.00107243 Jy ! Component: 2050 - total flux cleaned = -0.00108815 Jy ! Component: 2100 - total flux cleaned = -0.00115049 Jy ! Component: 2150 - total flux cleaned = -0.00127363 Jy ! Component: 2200 - total flux cleaned = -0.00131929 Jy ! Component: 2250 - total flux cleaned = -0.00134966 Jy ! Component: 2300 - total flux cleaned = -0.00146959 Jy ! Component: 2350 - total flux cleaned = -0.00149951 Jy ! Component: 2400 - total flux cleaned = -0.00164712 Jy ! Component: 2450 - total flux cleaned = -0.00167653 Jy ! Component: 2500 - total flux cleaned = -0.00177824 Jy ! Component: 2550 - total flux cleaned = -0.00180697 Jy ! Component: 2600 - total flux cleaned = -0.00184982 Jy ! Component: 2650 - total flux cleaned = -0.00192091 Jy ! Component: 2700 - total flux cleaned = -0.00194918 Jy ! Component: 2750 - total flux cleaned = -0.00206118 Jy ! Component: 2800 - total flux cleaned = -0.00206113 Jy ! Component: 2850 - total flux cleaned = -0.0021026 Jy ! Component: 2900 - total flux cleaned = -0.00214378 Jy ! Component: 2950 - total flux cleaned = -0.00221177 Jy ! Component: 3000 - total flux cleaned = -0.00221168 Jy ! Component: 3050 - total flux cleaned = -0.00222533 Jy ! Component: 3100 - total flux cleaned = -0.0022654 Jy ! Component: 3150 - total flux cleaned = -0.00230501 Jy ! Component: 3200 - total flux cleaned = -0.00230492 Jy ! Component: 3250 - total flux cleaned = -0.00231798 Jy ! Component: 3300 - total flux cleaned = -0.00231805 Jy ! Component: 3350 - total flux cleaned = -0.00236983 Jy ! Component: 3400 - total flux cleaned = -0.00240814 Jy ! Component: 3450 - total flux cleaned = -0.00243354 Jy ! Component: 3500 - total flux cleaned = -0.00243351 Jy ! Component: 3550 - total flux cleaned = -0.00239593 Jy ! Component: 3600 - total flux cleaned = -0.00240845 Jy ! Component: 3650 - total flux cleaned = -0.00239606 Jy ! Component: 3700 - total flux cleaned = -0.00234684 Jy ! Component: 3750 - total flux cleaned = -0.0023837 Jy ! Component: 3800 - total flux cleaned = -0.00233471 Jy ! Component: 3850 - total flux cleaned = -0.00235898 Jy ! Component: 3900 - total flux cleaned = -0.00232274 Jy ! Component: 3950 - total flux cleaned = -0.00233463 Jy ! Component: 4000 - total flux cleaned = -0.00227484 Jy ! Component: 4050 - total flux cleaned = -0.00226292 Jy ! Total flux subtracted in 4096 components = -0.00219198 Jy ! Clean residual min=-0.000673 max=0.000687 Jy/beam ! Clean residual mean=-0.000003 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0557476 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 367 components and 0.0557476 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1630+0015_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.834 at -2.586 degrees (North through East) ! Clean map min=-0.0013714 max=0.055802 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1630+0015_S_map.fits wmodel /vlbi/uf001/uva//J1630+0015_S_map.mod ! Writing 367 model components to file: /vlbi/uf001/uva//J1630+0015_S_map.mod wobs /vlbi/uf001/uva//J1630+0015_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1630+0015_S_uvs.fits wwins /vlbi/uf001/uva//J1630+0015_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1630+0015_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0558018 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218689 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17571 1.17571 2.35142 4.70285 9.4057 18.8114 37.6228 75.2456 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 255.164 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1630+0015_S_dfm.log closed on Mon Jan 14 03:43:47 2019