! Started logfile: /vlbi/uf001/uva//J1629-2026_S_a_dfm.log on Mon Jan 14 03:43:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1629-2026_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1629-2026_S_a_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1629-2026
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7830 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1629-2026_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009484Jy  sigma=17.867843
! Fit after  self-cal, rms=0.886944Jy  sigma=15.693409
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.423 mas, bmaj=6.888 mas, bpa=-6.793 degrees
! Estimated noise=0.661676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0817709 Jy
! Component: 100  -  total flux cleaned = 0.11599 Jy
! Total flux subtracted in 100 components = 0.11599 Jy
! Clean residual min=-0.007277 max=0.020105 Jy/beam
! Clean residual mean=-0.000014 rms=0.002499 Jy/beam
! Combined flux in latest and established models = 0.11599 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.11599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085321Jy  sigma=1.495746
! Fit after  self-cal, rms=0.084962Jy  sigma=1.490002
! Inverting map 
! Added new window around map position (-3, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223508 Jy
! Component: 100  -  total flux cleaned = 0.0370025 Jy
! Total flux subtracted in 100 components = 0.0370025 Jy
! Clean residual min=-0.005659 max=0.008426 Jy/beam
! Clean residual mean=-0.000007 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.152993 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 54 components and 0.152993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075259Jy  sigma=1.314062
! Fit after  self-cal, rms=0.075118Jy  sigma=1.311496
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112931 Jy
! Component: 100  -  total flux cleaned = 0.0191163 Jy
! Total flux subtracted in 100 components = 0.0191163 Jy
! Clean residual min=-0.005226 max=0.005987 Jy/beam
! Clean residual mean=-0.000004 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.172109 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 66 components and 0.172109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072323Jy  sigma=1.259656
! Fit after  self-cal, rms=0.072261Jy  sigma=1.258527
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.022 mas, bmaj=7.858 mas, bpa=-6.326 degrees
! Estimated noise=0.463857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103424 Jy
! Component: 100  -  total flux cleaned = 0.0167948 Jy
! Component: 150  -  total flux cleaned = 0.0212865 Jy
! Component: 200  -  total flux cleaned = 0.024529 Jy
! Total flux subtracted in 200 components = 0.024529 Jy
! Clean residual min=-0.003928 max=0.003581 Jy/beam
! Clean residual mean=-0.000014 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.196638 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.196638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070630Jy  sigma=1.227394
! Fit after  self-cal, rms=0.070534Jy  sigma=1.225465
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.022 x 7.858 at -6.326 degrees (North through East)
! Clean map  min=-0.003752  max=0.10468 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.00     KP        1.02     
!   LA        0.92     MK        0.94     NL        1.06     OV        1.03     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.07     KP        1.01     
!   LA        0.96     MK        0.97     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.93     HN        1.05     KP        1.05     
!   LA        0.94     MK        0.93     NL        1.08     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070534Jy  sigma=1.225465
! Fit after  self-cal, rms=0.069636Jy  sigma=1.212701
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=7.87 mas, bpa=-6.818 degrees
! Estimated noise=0.4582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132943 Jy
! Component: 100  -  total flux cleaned = 0.000267287 Jy
! Component: 150  -  total flux cleaned = 0.000309706 Jy
! Component: 200  -  total flux cleaned = 0.000273706 Jy
! Total flux subtracted in 200 components = 0.000273706 Jy
! Clean residual min=-0.002437 max=0.002290 Jy/beam
! Clean residual mean=-0.000008 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.196912 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.196912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069569Jy  sigma=1.211576
! Fit after  self-cal, rms=0.069600Jy  sigma=1.211290
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069600Jy  sigma=1.211290
! Fit after  self-cal, rms=0.069289Jy  sigma=1.209259
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=7.831 mas, bpa=-7.138 degrees
! Estimated noise=0.455727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000263014 Jy
! Component: 100  -  total flux cleaned = 0.000469538 Jy
! Component: 150  -  total flux cleaned = 0.000473235 Jy
! Component: 200  -  total flux cleaned = 0.000500746 Jy
! Total flux subtracted in 200 components = 0.000500746 Jy
! Clean residual min=-0.002287 max=0.002049 Jy/beam
! Clean residual mean=-0.000008 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.197413 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 112 components and 0.197413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069261Jy  sigma=1.208773
! Fit after  self-cal, rms=0.069260Jy  sigma=1.208697
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.99771e-05 Jy
! Component: 100  -  total flux cleaned = 8.98144e-05 Jy
! Component: 150  -  total flux cleaned = 8.92265e-05 Jy
! Component: 200  -  total flux cleaned = 6.57877e-05 Jy
! Total flux subtracted in 200 components = 6.57877e-05 Jy
! Clean residual min=-0.002275 max=0.002034 Jy/beam
! Clean residual mean=-0.000007 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.197479 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.197479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069243Jy  sigma=1.208400
! Fit after  self-cal, rms=0.069240Jy  sigma=1.208376
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069240Jy  sigma=1.208376
! Fit after  self-cal, rms=0.068956Jy  sigma=1.207921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.979 mas, bmaj=7.796 mas, bpa=-7.483 degrees
! Estimated noise=0.452295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330357 Jy
! Component: 100  -  total flux cleaned = 0.000471967 Jy
! Component: 150  -  total flux cleaned = 0.000515499 Jy
! Component: 200  -  total flux cleaned = 0.00053517 Jy
! Total flux subtracted in 200 components = 0.00053517 Jy
! Clean residual min=-0.002183 max=0.001970 Jy/beam
! Clean residual mean=-0.000007 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.198014 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 138 components and 0.198014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068942Jy  sigma=1.207676
! Fit after  self-cal, rms=0.068944Jy  sigma=1.207649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.84445e-05 Jy
! Component: 100  -  total flux cleaned = 4.9203e-05 Jy
! Component: 150  -  total flux cleaned = 6.83274e-05 Jy
! Component: 200  -  total flux cleaned = 3.17763e-05 Jy
! Total flux subtracted in 200 components = 3.17763e-05 Jy
! Clean residual min=-0.002164 max=0.001962 Jy/beam
! Clean residual mean=-0.000007 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.198045 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 143 components and 0.198045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068934Jy  sigma=1.207466
! Fit after  self-cal, rms=0.068933Jy  sigma=1.207456
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068933Jy  sigma=1.207456
! Fit after  self-cal, rms=0.068820Jy  sigma=1.207438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.362 mas, bmaj=15.83 mas, bpa=-2.922 degrees
! Estimated noise=0.608201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291574 Jy
! Component: 100  -  total flux cleaned = 0.000311253 Jy
! Component: 150  -  total flux cleaned = 0.000311831 Jy
! Component: 200  -  total flux cleaned = 0.000311775 Jy
! Total flux subtracted in 200 components = 0.000311775 Jy
! Clean residual min=-0.002391 max=0.002013 Jy/beam
! Clean residual mean=-0.000013 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.198357 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 152 components and 0.198357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068816Jy  sigma=1.207413
! Fit after  self-cal, rms=0.068816Jy  sigma=1.207386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.4137e-05 Jy
! Component: 100  -  total flux cleaned = 5.03498e-05 Jy
! Component: 150  -  total flux cleaned = 6.2597e-05 Jy
! Component: 200  -  total flux cleaned = 6.25236e-05 Jy
! Total flux subtracted in 200 components = 6.25236e-05 Jy
! Clean residual min=-0.002380 max=0.002001 Jy/beam
! Clean residual mean=-0.000012 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.19842 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 154 components and 0.19842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068815Jy  sigma=1.207400
! Fit after  self-cal, rms=0.068815Jy  sigma=1.207382
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.785 mas, bpa=-7.569 degrees
! Estimated noise=0.45111 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.972 x 7.785 at -7.569 degrees (North through East)
! Clean map  min=-0.0020311  max=0.10239 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.381 mas, bmaj=6.838 mas, bpa=-7.846 degrees
! Estimated noise=0.635067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0801397 Jy
! Component: 100  -  total flux cleaned = 0.116137 Jy
! Component: 150  -  total flux cleaned = 0.138089 Jy
! Component: 200  -  total flux cleaned = 0.152731 Jy
! Total flux subtracted in 200 components = 0.152731 Jy
! Clean residual min=-0.005159 max=0.008037 Jy/beam
! Clean residual mean=-0.000009 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 0.152731 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.152731 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.785 mas, bpa=-7.569 degrees
! Estimated noise=0.45111 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155733 Jy
! Component: 100  -  total flux cleaned = 0.0252446 Jy
! Component: 150  -  total flux cleaned = 0.0314716 Jy
! Component: 200  -  total flux cleaned = 0.0356401 Jy
! Total flux subtracted in 200 components = 0.0356401 Jy
! Clean residual min=-0.002609 max=0.003123 Jy/beam
! Clean residual mean=-0.000011 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.188371 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 98 components and 0.188371 Jy
! Inverting map 
! Added new window around map position (3.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323302 Jy
! Component: 100  -  total flux cleaned = 0.00546717 Jy
! Component: 150  -  total flux cleaned = 0.00657045 Jy
! Component: 200  -  total flux cleaned = 0.00719826 Jy
! Total flux subtracted in 200 components = 0.00719826 Jy
! Clean residual min=-0.002334 max=0.001881 Jy/beam
! Clean residual mean=-0.000008 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.195569 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 124 components and 0.195569 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.362 mas, bmaj=15.83 mas, bpa=-2.922 degrees
! Estimated noise=0.608201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163309 Jy
! Component: 100  -  total flux cleaned = 0.00237339 Jy
! Component: 150  -  total flux cleaned = 0.00258291 Jy
! Component: 200  -  total flux cleaned = 0.00264915 Jy
! Total flux subtracted in 200 components = 0.00264915 Jy
! Clean residual min=-0.002384 max=0.001995 Jy/beam
! Clean residual mean=-0.000013 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.198218 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.78859e-05 Jy
! Component: 100  -  total flux cleaned = 3.76586e-05 Jy
! Component: 150  -  total flux cleaned = 2.22086e-05 Jy
! Component: 200  -  total flux cleaned = 3.67066e-05 Jy
! Total flux subtracted in 200 components = 3.67066e-05 Jy
! Clean residual min=-0.002378 max=0.001985 Jy/beam
! Clean residual mean=-0.000013 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.198255 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 154 components and 0.198255 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.785 mas, bpa=-7.569 degrees
! Estimated noise=0.45111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434439 Jy
! Component: 100  -  total flux cleaned = -0.000404402 Jy
! Component: 150  -  total flux cleaned = -0.000404369 Jy
! Component: 200  -  total flux cleaned = -0.000403856 Jy
! Total flux subtracted in 200 components = -0.000403856 Jy
! Clean residual min=-0.002182 max=0.001804 Jy/beam
! Clean residual mean=-0.000007 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.197851 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 175 components and 0.197851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068795Jy  sigma=1.206949
! Fit after  self-cal, rms=0.068771Jy  sigma=1.206568
wmodel J1629-2026_S_a_map.mod
! Writing 175 model components to file: J1629-2026_S_a_map.mod
wobs   J1629-2026_S_a_uvs.fits
! Writing UV FITS file: J1629-2026_S_a_uvs.fits
wwins  J1629-2026_S_a_map.win
! wwins: Wrote 4 windows to J1629-2026_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000340236 Jy
! Component: 100  -  total flux cleaned = -0.000775275 Jy
! Component: 150  -  total flux cleaned = -0.00112312 Jy
! Component: 200  -  total flux cleaned = -0.00142444 Jy
! Component: 250  -  total flux cleaned = -0.00156813 Jy
! Component: 300  -  total flux cleaned = -0.00173512 Jy
! Component: 350  -  total flux cleaned = -0.00184286 Jy
! Component: 400  -  total flux cleaned = -0.00192206 Jy
! Component: 450  -  total flux cleaned = -0.00215323 Jy
! Component: 500  -  total flux cleaned = -0.00225317 Jy
! Component: 550  -  total flux cleaned = -0.00242419 Jy
! Component: 600  -  total flux cleaned = -0.00249554 Jy
! Component: 650  -  total flux cleaned = -0.00256576 Jy
! Component: 700  -  total flux cleaned = -0.00274924 Jy
! Component: 750  -  total flux cleaned = -0.00279408 Jy
! Component: 800  -  total flux cleaned = -0.0028828 Jy
! Component: 850  -  total flux cleaned = -0.00294796 Jy
! Component: 900  -  total flux cleaned = -0.00299095 Jy
! Component: 950  -  total flux cleaned = -0.00307474 Jy
! Component: 1000  -  total flux cleaned = -0.00307403 Jy
! Component: 1050  -  total flux cleaned = -0.00309381 Jy
! Component: 1100  -  total flux cleaned = -0.00299407 Jy
! Component: 1150  -  total flux cleaned = -0.00299436 Jy
! Component: 1200  -  total flux cleaned = -0.00307165 Jy
! Component: 1250  -  total flux cleaned = -0.00303308 Jy
! Component: 1300  -  total flux cleaned = -0.00305158 Jy
! Component: 1350  -  total flux cleaned = -0.00303261 Jy
! Component: 1400  -  total flux cleaned = -0.0030505 Jy
! Component: 1450  -  total flux cleaned = -0.00299626 Jy
! Component: 1500  -  total flux cleaned = -0.00290731 Jy
! Component: 1550  -  total flux cleaned = -0.00288976 Jy
! Component: 1600  -  total flux cleaned = -0.00287264 Jy
! Component: 1650  -  total flux cleaned = -0.00283864 Jy
! Component: 1700  -  total flux cleaned = -0.00282126 Jy
! Component: 1750  -  total flux cleaned = -0.00280439 Jy
! Component: 1800  -  total flux cleaned = -0.00280454 Jy
! Component: 1850  -  total flux cleaned = -0.0028372 Jy
! Component: 1900  -  total flux cleaned = -0.00282119 Jy
! Component: 1950  -  total flux cleaned = -0.00285303 Jy
! Component: 2000  -  total flux cleaned = -0.0028054 Jy
! Component: 2050  -  total flux cleaned = -0.00285263 Jy
! Component: 2100  -  total flux cleaned = -0.00285247 Jy
! Component: 2150  -  total flux cleaned = -0.00283702 Jy
! Component: 2200  -  total flux cleaned = -0.00288241 Jy
! Component: 2250  -  total flux cleaned = -0.00283689 Jy
! Component: 2300  -  total flux cleaned = -0.00282215 Jy
! Component: 2350  -  total flux cleaned = -0.00273388 Jy
! Component: 2400  -  total flux cleaned = -0.0027921 Jy
! Component: 2450  -  total flux cleaned = -0.00273437 Jy
! Component: 2500  -  total flux cleaned = -0.00277725 Jy
! Component: 2550  -  total flux cleaned = -0.00274863 Jy
! Component: 2600  -  total flux cleaned = -0.00270666 Jy
! Component: 2650  -  total flux cleaned = -0.00267886 Jy
! Component: 2700  -  total flux cleaned = -0.00267897 Jy
! Component: 2750  -  total flux cleaned = -0.00270623 Jy
! Component: 2800  -  total flux cleaned = -0.00262482 Jy
! Component: 2850  -  total flux cleaned = -0.0026517 Jy
! Component: 2900  -  total flux cleaned = -0.00263841 Jy
! Component: 2950  -  total flux cleaned = -0.00261184 Jy
! Component: 3000  -  total flux cleaned = -0.00259869 Jy
! Component: 3050  -  total flux cleaned = -0.00257276 Jy
! Component: 3100  -  total flux cleaned = -0.00254702 Jy
! Component: 3150  -  total flux cleaned = -0.00257267 Jy
! Component: 3200  -  total flux cleaned = -0.00253457 Jy
! Component: 3250  -  total flux cleaned = -0.00248405 Jy
! Component: 3300  -  total flux cleaned = -0.00247145 Jy
! Component: 3350  -  total flux cleaned = -0.00243409 Jy
! Component: 3400  -  total flux cleaned = -0.00237241 Jy
! Component: 3450  -  total flux cleaned = -0.0023356 Jy
! Component: 3500  -  total flux cleaned = -0.0023356 Jy
! Component: 3550  -  total flux cleaned = -0.00232358 Jy
! Component: 3600  -  total flux cleaned = -0.00223975 Jy
! Component: 3650  -  total flux cleaned = -0.00222781 Jy
! Component: 3700  -  total flux cleaned = -0.00222785 Jy
! Component: 3750  -  total flux cleaned = -0.00218086 Jy
! Component: 3800  -  total flux cleaned = -0.00214579 Jy
! Component: 3850  -  total flux cleaned = -0.00209962 Jy
! Component: 3900  -  total flux cleaned = -0.00205372 Jy
! Component: 3950  -  total flux cleaned = -0.0019739 Jy
! Component: 4000  -  total flux cleaned = -0.00200789 Jy
! Component: 4050  -  total flux cleaned = -0.00199656 Jy
! Total flux subtracted in 4096 components = -0.00195176 Jy
! Clean residual min=-0.000748 max=0.000791 Jy/beam
! Clean residual mean=-0.000004 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.195899 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 469 components and 0.195899 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1629-2026_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.972 x 7.785 at -7.569 degrees (North through East)
! Clean map  min=-0.0016217  max=0.10071 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1629-2026_S_a_map.fits
wmodel /vlbi/uf001/uva//J1629-2026_S_a_map.mod
! Writing 469 model components to file: /vlbi/uf001/uva//J1629-2026_S_a_map.mod
wobs   /vlbi/uf001/uva//J1629-2026_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1629-2026_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J1629-2026_S_a_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1629-2026_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10071 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205858 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.613222 0.613222 1.22644 2.45289 4.90577 9.81155 19.6231 39.2462 78.4924
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  489.219 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1629-2026_S_a_dfm.log closed on Mon Jan 14 03:43:36 2019