! Started logfile: /vlbi/uf001/uva//J1629-1720_S_dfm.log on Mon Jan 14 03:43:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1629-1720_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1629-1720_S_uva.fits ! AN table 1: 48 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.990741 visibilities/baseline/integration-bin. ! Found source: J1629-1720 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5136 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1629-1720_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.019203Jy sigma=16.194879 ! Fit after self-cal, rms=0.888629Jy sigma=14.088419 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.354 mas, bmaj=6.401 mas, bpa=-3.128 degrees ! Estimated noise=0.859539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867413 Jy ! Component: 100 - total flux cleaned = 0.110604 Jy ! Total flux subtracted in 100 components = 0.110604 Jy ! Clean residual min=-0.006656 max=0.010212 Jy/beam ! Clean residual mean=-0.000012 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.110604 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.110604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093571Jy sigma=1.276547 ! Fit after self-cal, rms=0.093412Jy sigma=1.274942 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=7.304 mas, bpa=-2.652 degrees ! Estimated noise=0.641853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140849 Jy ! Component: 100 - total flux cleaned = 0.0208711 Jy ! Component: 150 - total flux cleaned = 0.0246385 Jy ! Component: 200 - total flux cleaned = 0.026803 Jy ! Total flux subtracted in 200 components = 0.026803 Jy ! Clean residual min=-0.006011 max=0.006214 Jy/beam ! Clean residual mean=-0.000004 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.137407 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.137407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091563Jy sigma=1.235576 ! Fit after self-cal, rms=0.091567Jy sigma=1.235005 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.866 x 7.304 at -2.652 degrees (North through East) ! Clean map min=-0.0059515 max=0.11254 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.07 KP 1.00 LA 0.95 ! MK 0.98 NL 1.12 OV 0.93 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 HN 1.08 KP 0.98 LA 0.96 ! MK 1.02 NL 1.10 OV 0.79 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.09 KP 1.07 LA 0.95 ! MK 1.00 NL 1.05 OV 0.95 PT 0.99 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.091567Jy sigma=1.235005 ! Fit after self-cal, rms=0.094786Jy sigma=1.217861 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=7.312 mas, bpa=-2.211 degrees ! Estimated noise=0.638834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57234e-05 Jy ! Component: 100 - total flux cleaned = 0.000149753 Jy ! Component: 150 - total flux cleaned = 0.000178059 Jy ! Component: 200 - total flux cleaned = 0.000178113 Jy ! Total flux subtracted in 200 components = 0.000178113 Jy ! Clean residual min=-0.005356 max=0.004733 Jy/beam ! Clean residual mean=-0.000002 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.137585 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.137585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094757Jy sigma=1.217437 ! Fit after self-cal, rms=0.094963Jy sigma=1.216903 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094963Jy sigma=1.216903 ! Fit after self-cal, rms=0.102064Jy sigma=1.194892 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.326 mas, bpa=-2.458 degrees ! Estimated noise=0.640699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000536264 Jy ! Component: 100 - total flux cleaned = 0.000699094 Jy ! Component: 150 - total flux cleaned = 0.000722163 Jy ! Component: 200 - total flux cleaned = 0.000722755 Jy ! Total flux subtracted in 200 components = 0.000722755 Jy ! Clean residual min=-0.002898 max=0.002657 Jy/beam ! Clean residual mean=-0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.138308 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.138308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102046Jy sigma=1.194635 ! Fit after self-cal, rms=0.102343Jy sigma=1.194261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05398e-05 Jy ! Component: 100 - total flux cleaned = -4.86479e-05 Jy ! Component: 150 - total flux cleaned = -4.83386e-05 Jy ! Component: 200 - total flux cleaned = -4.83197e-05 Jy ! Total flux subtracted in 200 components = -4.83197e-05 Jy ! Clean residual min=-0.002972 max=0.002644 Jy/beam ! Clean residual mean=-0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.13826 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.13826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102332Jy sigma=1.194172 ! Fit after self-cal, rms=0.102348Jy sigma=1.194164 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102348Jy sigma=1.194164 ! Fit after self-cal, rms=0.103338Jy sigma=1.193985 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.318 mas, bpa=-2.589 degrees ! Estimated noise=0.639227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135878 Jy ! Component: 100 - total flux cleaned = 0.000191387 Jy ! Component: 150 - total flux cleaned = 0.000238358 Jy ! Component: 200 - total flux cleaned = 0.000251935 Jy ! Total flux subtracted in 200 components = 0.000251935 Jy ! Clean residual min=-0.003001 max=0.002640 Jy/beam ! Clean residual mean=-0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.138512 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.138512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103327Jy sigma=1.193895 ! Fit after self-cal, rms=0.103353Jy sigma=1.193885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.19186e-05 Jy ! Component: 100 - total flux cleaned = 4.40352e-06 Jy ! Component: 150 - total flux cleaned = 4.32724e-06 Jy ! Component: 200 - total flux cleaned = 1.65438e-05 Jy ! Total flux subtracted in 200 components = 1.65438e-05 Jy ! Clean residual min=-0.003011 max=0.002638 Jy/beam ! Clean residual mean=-0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.138528 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.138528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103345Jy sigma=1.193856 ! Fit after self-cal, rms=0.103351Jy sigma=1.193851 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103351Jy sigma=1.193851 ! Fit after self-cal, rms=0.103334Jy sigma=1.193821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=15.36 mas, bpa=0.1634 degrees ! Estimated noise=0.871301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152578 Jy ! Component: 100 - total flux cleaned = 0.000154258 Jy ! Component: 150 - total flux cleaned = 0.000165396 Jy ! Component: 200 - total flux cleaned = 0.000165488 Jy ! Total flux subtracted in 200 components = 0.000165488 Jy ! Clean residual min=-0.003004 max=0.003718 Jy/beam ! Clean residual mean=-0.000005 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.138694 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 0.138694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103339Jy sigma=1.193739 ! Fit after self-cal, rms=0.103317Jy sigma=1.193717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (96, -100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171587 Jy ! Component: 100 - total flux cleaned = 0.00189383 Jy ! Component: 150 - total flux cleaned = 0.00199533 Jy ! Component: 200 - total flux cleaned = 0.00195838 Jy ! Total flux subtracted in 200 components = 0.00195838 Jy ! Clean residual min=-0.002337 max=0.002013 Jy/beam ! Clean residual mean=-0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.140652 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 101 components and 0.140652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103223Jy sigma=1.192734 ! Fit after self-cal, rms=0.103247Jy sigma=1.192530 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.313 mas, bpa=-2.674 degrees ! Estimated noise=0.637901 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.858 x 7.313 at -2.674 degrees (North through East) ! Clean map min=-0.0026599 max=0.11214 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=6.435 mas, bpa=-3.171 degrees ! Estimated noise=0.854796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858948 Jy ! Component: 100 - total flux cleaned = 0.110487 Jy ! Component: 150 - total flux cleaned = 0.121832 Jy ! Component: 200 - total flux cleaned = 0.127821 Jy ! Total flux subtracted in 200 components = 0.127821 Jy ! Clean residual min=-0.005101 max=0.004382 Jy/beam ! Clean residual mean=-0.000008 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.127821 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.127821 Jy ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.313 mas, bpa=-2.674 degrees ! Estimated noise=0.637901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514547 Jy ! Component: 100 - total flux cleaned = 0.00700578 Jy ! Component: 150 - total flux cleaned = 0.00821879 Jy ! Component: 200 - total flux cleaned = 0.00905771 Jy ! Total flux subtracted in 200 components = 0.00905771 Jy ! Clean residual min=-0.003091 max=0.002362 Jy/beam ! Clean residual mean=-0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.136878 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.136878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=15.36 mas, bpa=0.1634 degrees ! Estimated noise=0.871301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213669 Jy ! Component: 100 - total flux cleaned = 0.00255982 Jy ! Component: 150 - total flux cleaned = 0.00270201 Jy ! Component: 200 - total flux cleaned = 0.00286595 Jy ! Total flux subtracted in 200 components = 0.00286595 Jy ! Clean residual min=-0.002444 max=0.002039 Jy/beam ! Clean residual mean=-0.000005 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.139744 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109414 Jy ! Component: 100 - total flux cleaned = 0.000277962 Jy ! Component: 150 - total flux cleaned = 0.000403304 Jy ! Component: 200 - total flux cleaned = 0.000490682 Jy ! Total flux subtracted in 200 components = 0.000490682 Jy ! Clean residual min=-0.002365 max=0.002110 Jy/beam ! Clean residual mean=-0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.140235 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 107 components and 0.140235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.313 mas, bpa=-2.674 degrees ! Estimated noise=0.637901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127321 Jy ! Component: 100 - total flux cleaned = -0.000230902 Jy ! Component: 150 - total flux cleaned = -0.000184445 Jy ! Component: 200 - total flux cleaned = -5.65357e-05 Jy ! Total flux subtracted in 200 components = -5.65357e-05 Jy ! Clean residual min=-0.002850 max=0.002116 Jy/beam ! Clean residual mean=-0.000002 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.140179 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 0.140179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103144Jy sigma=1.191202 ! Fit after self-cal, rms=0.103150Jy sigma=1.191094 wmodel J1629-1720_S_map.mod ! Writing 140 model components to file: J1629-1720_S_map.mod wobs J1629-1720_S_uvs.fits ! Writing UV FITS file: J1629-1720_S_uvs.fits wwins J1629-1720_S_map.win ! wwins: Wrote 2 windows to J1629-1720_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109852 Jy ! Component: 100 - total flux cleaned = -0.00159119 Jy ! Component: 150 - total flux cleaned = -0.00193614 Jy ! Component: 200 - total flux cleaned = -0.00229983 Jy ! Component: 250 - total flux cleaned = -0.00257855 Jy ! Component: 300 - total flux cleaned = -0.00277966 Jy ! Component: 350 - total flux cleaned = -0.00281252 Jy ! Component: 400 - total flux cleaned = -0.00287632 Jy ! Component: 450 - total flux cleaned = -0.00293834 Jy ! Component: 500 - total flux cleaned = -0.00299861 Jy ! Component: 550 - total flux cleaned = -0.00305739 Jy ! Component: 600 - total flux cleaned = -0.00305757 Jy ! Component: 650 - total flux cleaned = -0.00305768 Jy ! Component: 700 - total flux cleaned = -0.00314033 Jy ! Component: 750 - total flux cleaned = -0.00324814 Jy ! Component: 800 - total flux cleaned = -0.00327416 Jy ! Component: 850 - total flux cleaned = -0.00332597 Jy ! Component: 900 - total flux cleaned = -0.00335167 Jy ! Component: 950 - total flux cleaned = -0.00342763 Jy ! Component: 1000 - total flux cleaned = -0.0035263 Jy ! Component: 1050 - total flux cleaned = -0.00357465 Jy ! Component: 1100 - total flux cleaned = -0.00357422 Jy ! Component: 1150 - total flux cleaned = -0.0036213 Jy ! Component: 1200 - total flux cleaned = -0.00364397 Jy ! Component: 1250 - total flux cleaned = -0.00362098 Jy ! Component: 1300 - total flux cleaned = -0.00364363 Jy ! Component: 1350 - total flux cleaned = -0.00362101 Jy ! Component: 1400 - total flux cleaned = -0.0035551 Jy ! Component: 1450 - total flux cleaned = -0.0035987 Jy ! Component: 1500 - total flux cleaned = -0.00362007 Jy ! Component: 1550 - total flux cleaned = -0.00359886 Jy ! Component: 1600 - total flux cleaned = -0.00368262 Jy ! Component: 1650 - total flux cleaned = -0.00370301 Jy ! Component: 1700 - total flux cleaned = -0.00366197 Jy ! Component: 1750 - total flux cleaned = -0.00368226 Jy ! Component: 1800 - total flux cleaned = -0.00366211 Jy ! Component: 1850 - total flux cleaned = -0.00368185 Jy ! Component: 1900 - total flux cleaned = -0.00364241 Jy ! Component: 1950 - total flux cleaned = -0.00366184 Jy ! Component: 2000 - total flux cleaned = -0.00371957 Jy ! Component: 2050 - total flux cleaned = -0.00364371 Jy ! Component: 2100 - total flux cleaned = -0.00377563 Jy ! Component: 2150 - total flux cleaned = -0.00373833 Jy ! Component: 2200 - total flux cleaned = -0.00377542 Jy ! Component: 2250 - total flux cleaned = -0.00372058 Jy ! Component: 2300 - total flux cleaned = -0.00379329 Jy ! Component: 2350 - total flux cleaned = -0.00377527 Jy ! Component: 2400 - total flux cleaned = -0.00381094 Jy ! Component: 2450 - total flux cleaned = -0.00384591 Jy ! Component: 2500 - total flux cleaned = -0.00384606 Jy ! Component: 2550 - total flux cleaned = -0.00381171 Jy ! Component: 2600 - total flux cleaned = -0.00388066 Jy ! Component: 2650 - total flux cleaned = -0.00384677 Jy ! Component: 2700 - total flux cleaned = -0.00384694 Jy ! Component: 2750 - total flux cleaned = -0.00389736 Jy ! Component: 2800 - total flux cleaned = -0.00388072 Jy ! Component: 2850 - total flux cleaned = -0.00391372 Jy ! Component: 2900 - total flux cleaned = -0.00394636 Jy ! Component: 2950 - total flux cleaned = -0.00393025 Jy ! Component: 3000 - total flux cleaned = -0.00397865 Jy ! Component: 3050 - total flux cleaned = -0.00397868 Jy ! Component: 3100 - total flux cleaned = -0.00399466 Jy ! Component: 3150 - total flux cleaned = -0.00404205 Jy ! Component: 3200 - total flux cleaned = -0.00408893 Jy ! Component: 3250 - total flux cleaned = -0.0041202 Jy ! Component: 3300 - total flux cleaned = -0.00418211 Jy ! Component: 3350 - total flux cleaned = -0.00421297 Jy ! Component: 3400 - total flux cleaned = -0.00430435 Jy ! Component: 3450 - total flux cleaned = -0.00431946 Jy ! Component: 3500 - total flux cleaned = -0.00434943 Jy ! Component: 3550 - total flux cleaned = -0.00439417 Jy ! Component: 3600 - total flux cleaned = -0.00443871 Jy ! Component: 3650 - total flux cleaned = -0.00445343 Jy ! Component: 3700 - total flux cleaned = -0.00443878 Jy ! Component: 3750 - total flux cleaned = -0.00454106 Jy ! Component: 3800 - total flux cleaned = -0.00454104 Jy ! Component: 3850 - total flux cleaned = -0.00457003 Jy ! Component: 3900 - total flux cleaned = -0.00455569 Jy ! Component: 3950 - total flux cleaned = -0.00459851 Jy ! Component: 4000 - total flux cleaned = -0.00455595 Jy ! Component: 4050 - total flux cleaned = -0.00454182 Jy ! Total flux subtracted in 4096 components = -0.00456986 Jy ! Clean residual min=-0.000795 max=0.000898 Jy/beam ! Clean residual mean=0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.135609 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 402 components and 0.135609 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1629-1720_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.858 x 7.313 at -2.674 degrees (North through East) ! Clean map min=-0.0024168 max=0.11296 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1629-1720_S_map.fits wmodel /vlbi/uf001/uva//J1629-1720_S_map.mod ! Writing 402 model components to file: /vlbi/uf001/uva//J1629-1720_S_map.mod wobs /vlbi/uf001/uva//J1629-1720_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1629-1720_S_uvs.fits wwins /vlbi/uf001/uva//J1629-1720_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1629-1720_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.112961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244464 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.649244 0.649244 1.29849 2.59698 5.19395 10.3879 20.7758 41.5516 83.1032 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 462.075 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1629-1720_S_dfm.log closed on Mon Jan 14 03:43:24 2019