! Started logfile: /vlbi/uf001/uva//J1628-1415_X_dfm.log on Mon Jan 14 03:43:14 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1628-1415_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1628-1415_X_uva.fits
! AN table 1: 38 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.980994 visibilities/baseline/integration-bin.
! Found source: J1628-1415
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16104 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1628-1415_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013300Jy  sigma=22.635826
! Fit after  self-cal, rms=0.851663Jy  sigma=18.924608
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6198 mas, bmaj=1.584 mas, bpa=-2.172 degrees
! Estimated noise=0.427807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109517 Jy
! Component: 100  -  total flux cleaned = 0.141057 Jy
! Total flux subtracted in 100 components = 0.141057 Jy
! Clean residual min=-0.006879 max=0.014927 Jy/beam
! Clean residual mean=-0.000008 rms=0.001800 Jy/beam
! Combined flux in latest and established models = 0.141057 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.141057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071175Jy  sigma=1.494068
! Fit after  self-cal, rms=0.071105Jy  sigma=1.492880
! Inverting map 
! Added new window around map position (0.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170524 Jy
! Component: 100  -  total flux cleaned = 0.0270341 Jy
! Total flux subtracted in 100 components = 0.0270341 Jy
! Clean residual min=-0.005108 max=0.007717 Jy/beam
! Clean residual mean=-0.000006 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.168091 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.168091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065445Jy  sigma=1.335602
! Fit after  self-cal, rms=0.065372Jy  sigma=1.334280
! Inverting map 
! Added new window around map position (1.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00773818 Jy
! Component: 100  -  total flux cleaned = 0.0129521 Jy
! Total flux subtracted in 100 components = 0.0129521 Jy
! Clean residual min=-0.004635 max=0.004908 Jy/beam
! Clean residual mean=-0.000005 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.181043 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.181043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064081Jy  sigma=1.297993
! Fit after  self-cal, rms=0.064034Jy  sigma=1.296913
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=1.891 mas, bpa=-1.288 degrees
! Estimated noise=0.267313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00615892 Jy
! Component: 100  -  total flux cleaned = 0.0100179 Jy
! Component: 150  -  total flux cleaned = 0.0127195 Jy
! Component: 200  -  total flux cleaned = 0.0146662 Jy
! Total flux subtracted in 200 components = 0.0146662 Jy
! Clean residual min=-0.004535 max=0.004698 Jy/beam
! Clean residual mean=-0.000003 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.195709 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.195709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063446Jy  sigma=1.278548
! Fit after  self-cal, rms=0.063431Jy  sigma=1.277781
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7771 x 1.891 at -1.288 degrees (North through East)
! Clean map  min=-0.0042115  max=0.14958 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.03     KP        1.01     LA        0.98     
!   MK        1.05     NL        1.07     OV        0.91     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.04     KP        1.02     LA        0.98     
!   MK        0.99     NL        1.06     OV        0.90     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        0.99     KP        1.02     LA        0.99     
!   MK        1.03     NL        1.07     OV        0.90     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.01     KP        1.00     LA        0.97     
!   MK        0.99     NL        1.08     OV        0.92     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.00     KP        1.03     LA        0.97     
!   MK        1.00     NL        1.09     OV        0.90     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.00     KP        1.02     LA        1.00     
!   MK        1.07     NL        1.09     OV        0.91     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.03     KP        1.03     LA        1.01     
!   MK        0.98     NL        1.05     OV        0.91     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.05     KP        1.02     LA        0.99     
!   MK        1.02     NL        1.07     OV        0.92     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.04     KP        0.99     LA        0.98     
!   MK        1.07     NL        1.08     OV        0.91     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.99     KP        1.03     LA        0.97     
!   MK        1.01     NL        1.11     OV        0.91     PT        0.93     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.10     KP        1.00     LA        0.99     
!   MK        0.99     NL        1.09     OV        0.90     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.01     KP        1.02     LA        1.00     
!   MK        1.00     NL        1.06     OV        0.89     PT        0.96     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.063431Jy  sigma=1.277781
! Fit after  self-cal, rms=0.062957Jy  sigma=1.251497
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7806 mas, bmaj=1.901 mas, bpa=-0.9039 degrees
! Estimated noise=0.266618 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141361 Jy
! Component: 100  -  total flux cleaned = -0.00174768 Jy
! Component: 150  -  total flux cleaned = -0.0019045 Jy
! Component: 200  -  total flux cleaned = -0.00206942 Jy
! Total flux subtracted in 200 components = -0.00206942 Jy
! Clean residual min=-0.002745 max=0.003413 Jy/beam
! Clean residual mean=0.000001 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.19364 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.19364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062914Jy  sigma=1.250306
! Fit after  self-cal, rms=0.062962Jy  sigma=1.250037
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062962Jy  sigma=1.250037
! Fit after  self-cal, rms=0.063898Jy  sigma=1.241722
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7803 mas, bmaj=1.899 mas, bpa=-0.9111 degrees
! Estimated noise=0.266196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012718 Jy
! Component: 100  -  total flux cleaned = -0.00145514 Jy
! Component: 150  -  total flux cleaned = -0.0016744 Jy
! Component: 200  -  total flux cleaned = -0.00185727 Jy
! Total flux subtracted in 200 components = -0.00185727 Jy
! Clean residual min=-0.002415 max=0.003019 Jy/beam
! Clean residual mean=-0.000002 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.191783 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.191783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063852Jy  sigma=1.240607
! Fit after  self-cal, rms=0.063870Jy  sigma=1.240422
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37.8, -35.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267741 Jy
! Component: 100  -  total flux cleaned = 0.00409119 Jy
! Component: 150  -  total flux cleaned = 0.0050536 Jy
! Component: 200  -  total flux cleaned = 0.00568042 Jy
! Total flux subtracted in 200 components = 0.00568042 Jy
! Clean residual min=-0.002179 max=0.002233 Jy/beam
! Clean residual mean=-0.000003 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.197463 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 79 components and 0.197463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063755Jy  sigma=1.237219
! Fit after  self-cal, rms=0.063744Jy  sigma=1.237023
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063744Jy  sigma=1.237023
! Fit after  self-cal, rms=0.063672Jy  sigma=1.236547
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7801 mas, bmaj=1.897 mas, bpa=-0.8617 degrees
! Estimated noise=0.265277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103729 Jy
! Component: 100  -  total flux cleaned = 0.00017399 Jy
! Component: 150  -  total flux cleaned = 0.000409978 Jy
! Component: 200  -  total flux cleaned = 0.0006206 Jy
! Total flux subtracted in 200 components = 0.0006206 Jy
! Clean residual min=-0.002013 max=0.002212 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.198084 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 85 components and 0.198084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063646Jy  sigma=1.235796
! Fit after  self-cal, rms=0.063646Jy  sigma=1.235755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11, 25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023009 Jy
! Component: 100  -  total flux cleaned = 0.00369552 Jy
! Component: 150  -  total flux cleaned = 0.00447864 Jy
! Component: 200  -  total flux cleaned = 0.00476096 Jy
! Total flux subtracted in 200 components = 0.00476096 Jy
! Clean residual min=-0.001838 max=0.001610 Jy/beam
! Clean residual mean=-0.000003 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.202845 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 116 components and 0.202845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063560Jy  sigma=1.233190
! Fit after  self-cal, rms=0.063551Jy  sigma=1.233040
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063551Jy  sigma=1.233040
! Fit after  self-cal, rms=0.063407Jy  sigma=1.232808
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.053 mas, bmaj=4.177 mas, bpa=3.262 degrees
! Estimated noise=0.349391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194 Jy
! Component: 100  -  total flux cleaned = 0.0029029 Jy
! Component: 150  -  total flux cleaned = 0.00353773 Jy
! Component: 200  -  total flux cleaned = 0.00403046 Jy
! Total flux subtracted in 200 components = 0.00403046 Jy
! Clean residual min=-0.002528 max=0.002351 Jy/beam
! Clean residual mean=-0.000006 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.206875 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 0.206875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063402Jy  sigma=1.232355
! Fit after  self-cal, rms=0.063401Jy  sigma=1.232260
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584549 Jy
! Component: 100  -  total flux cleaned = 0.000699591 Jy
! Component: 150  -  total flux cleaned = 0.000751607 Jy
! Component: 200  -  total flux cleaned = 0.000869954 Jy
! Total flux subtracted in 200 components = 0.000869954 Jy
! Clean residual min=-0.002420 max=0.002303 Jy/beam
! Clean residual mean=-0.000007 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.207745 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 141 components and 0.207745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063411Jy  sigma=1.232418
! Fit after  self-cal, rms=0.063410Jy  sigma=1.232398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7798 mas, bmaj=1.897 mas, bpa=-0.8752 degrees
! Estimated noise=0.264409 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7798 x 1.897 at -0.8752 degrees (North through East)
! Clean map  min=-0.0014776  max=0.14904 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6212 mas, bmaj=1.587 mas, bpa=-1.761 degrees
! Estimated noise=0.422434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108052 Jy
! Component: 100  -  total flux cleaned = 0.140044 Jy
! Component: 150  -  total flux cleaned = 0.156814 Jy
! Component: 200  -  total flux cleaned = 0.166611 Jy
! Total flux subtracted in 200 components = 0.166611 Jy
! Clean residual min=-0.002986 max=0.005033 Jy/beam
! Clean residual mean=-0.000003 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.166611 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.166611 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7798 mas, bmaj=1.897 mas, bpa=-0.8752 degrees
! Estimated noise=0.264409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00965824 Jy
! Component: 100  -  total flux cleaned = 0.0147648 Jy
! Component: 150  -  total flux cleaned = 0.0182178 Jy
! Component: 200  -  total flux cleaned = 0.0209606 Jy
! Total flux subtracted in 200 components = 0.0209606 Jy
! Clean residual min=-0.002404 max=0.002303 Jy/beam
! Clean residual mean=-0.000000 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.187572 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 40 components and 0.187572 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.053 mas, bmaj=4.177 mas, bpa=3.262 degrees
! Estimated noise=0.349391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444831 Jy
! Component: 100  -  total flux cleaned = 0.00779594 Jy
! Component: 150  -  total flux cleaned = 0.0104207 Jy
! Component: 200  -  total flux cleaned = 0.0125267 Jy
! Total flux subtracted in 200 components = 0.0125267 Jy
! Clean residual min=-0.002894 max=0.002338 Jy/beam
! Clean residual mean=-0.000004 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.200098 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171693 Jy
! Component: 100  -  total flux cleaned = 0.00312482 Jy
! Component: 150  -  total flux cleaned = 0.00428398 Jy
! Component: 200  -  total flux cleaned = 0.0052409 Jy
! Total flux subtracted in 200 components = 0.0052409 Jy
! Clean residual min=-0.002608 max=0.002239 Jy/beam
! Clean residual mean=-0.000006 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.205339 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 105 components and 0.205339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7798 mas, bmaj=1.897 mas, bpa=-0.8752 degrees
! Estimated noise=0.264409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884629 Jy
! Component: 100  -  total flux cleaned = 0.000885245 Jy
! Component: 150  -  total flux cleaned = 0.000928577 Jy
! Component: 200  -  total flux cleaned = 0.000892886 Jy
! Total flux subtracted in 200 components = 0.000892886 Jy
! Clean residual min=-0.001854 max=0.001899 Jy/beam
! Clean residual mean=-0.000003 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.206232 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 123 components and 0.206232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063443Jy  sigma=1.233098
! Fit after  self-cal, rms=0.063437Jy  sigma=1.232861
wmodel J1628-1415_X_map.mod
! Writing 123 model components to file: J1628-1415_X_map.mod
wobs   J1628-1415_X_uvs.fits
! Writing UV FITS file: J1628-1415_X_uvs.fits
wwins  J1628-1415_X_map.win
! wwins: Wrote 5 windows to J1628-1415_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156977 Jy
! Component: 100  -  total flux cleaned = -0.000330132 Jy
! Component: 150  -  total flux cleaned = -0.000541381 Jy
! Component: 200  -  total flux cleaned = -0.000716704 Jy
! Component: 250  -  total flux cleaned = -0.000885333 Jy
! Component: 300  -  total flux cleaned = -0.000954683 Jy
! Component: 350  -  total flux cleaned = -0.000999372 Jy
! Component: 400  -  total flux cleaned = -0.00106402 Jy
! Component: 450  -  total flux cleaned = -0.00108522 Jy
! Component: 500  -  total flux cleaned = -0.00114732 Jy
! Component: 550  -  total flux cleaned = -0.00120753 Jy
! Component: 600  -  total flux cleaned = -0.00124688 Jy
! Component: 650  -  total flux cleaned = -0.00126584 Jy
! Component: 700  -  total flux cleaned = -0.00124703 Jy
! Component: 750  -  total flux cleaned = -0.00132085 Jy
! Component: 800  -  total flux cleaned = -0.00130249 Jy
! Component: 850  -  total flux cleaned = -0.00128487 Jy
! Component: 900  -  total flux cleaned = -0.00137227 Jy
! Component: 950  -  total flux cleaned = -0.00138862 Jy
! Component: 1000  -  total flux cleaned = -0.0013888 Jy
! Component: 1050  -  total flux cleaned = -0.00143866 Jy
! Component: 1100  -  total flux cleaned = -0.00145524 Jy
! Component: 1150  -  total flux cleaned = -0.00150366 Jy
! Component: 1200  -  total flux cleaned = -0.00148745 Jy
! Component: 1250  -  total flux cleaned = -0.00150326 Jy
! Component: 1300  -  total flux cleaned = -0.00150347 Jy
! Component: 1350  -  total flux cleaned = -0.00156467 Jy
! Component: 1400  -  total flux cleaned = -0.00153472 Jy
! Component: 1450  -  total flux cleaned = -0.00157988 Jy
! Component: 1500  -  total flux cleaned = -0.0016388 Jy
! Component: 1550  -  total flux cleaned = -0.00159523 Jy
! Component: 1600  -  total flux cleaned = -0.00160977 Jy
! Component: 1650  -  total flux cleaned = -0.00166626 Jy
! Component: 1700  -  total flux cleaned = -0.00163809 Jy
! Component: 1750  -  total flux cleaned = -0.00162424 Jy
! Component: 1800  -  total flux cleaned = -0.00167895 Jy
! Component: 1850  -  total flux cleaned = -0.00173318 Jy
! Component: 1900  -  total flux cleaned = -0.00174663 Jy
! Component: 1950  -  total flux cleaned = -0.00185297 Jy
! Component: 2000  -  total flux cleaned = -0.00187907 Jy
! Component: 2050  -  total flux cleaned = -0.00191818 Jy
! Component: 2100  -  total flux cleaned = -0.00200831 Jy
! Component: 2150  -  total flux cleaned = -0.00209744 Jy
! Component: 2200  -  total flux cleaned = -0.00212267 Jy
! Component: 2250  -  total flux cleaned = -0.00218526 Jy
! Component: 2300  -  total flux cleaned = -0.00224705 Jy
! Component: 2350  -  total flux cleaned = -0.00229581 Jy
! Component: 2400  -  total flux cleaned = -0.00234423 Jy
! Component: 2450  -  total flux cleaned = -0.00234421 Jy
! Component: 2500  -  total flux cleaned = -0.00239197 Jy
! Component: 2550  -  total flux cleaned = -0.00245114 Jy
! Component: 2600  -  total flux cleaned = -0.00252134 Jy
! Component: 2650  -  total flux cleaned = -0.00255622 Jy
! Component: 2700  -  total flux cleaned = -0.00263688 Jy
! Component: 2750  -  total flux cleaned = -0.00263674 Jy
! Component: 2800  -  total flux cleaned = -0.00269343 Jy
! Component: 2850  -  total flux cleaned = -0.00280567 Jy
! Component: 2900  -  total flux cleaned = -0.00287249 Jy
! Component: 2950  -  total flux cleaned = -0.00291679 Jy
! Component: 3000  -  total flux cleaned = -0.00299346 Jy
! Component: 3050  -  total flux cleaned = -0.00302607 Jy
! Component: 3100  -  total flux cleaned = -0.00311246 Jy
! Component: 3150  -  total flux cleaned = -0.00319813 Jy
! Component: 3200  -  total flux cleaned = -0.00324056 Jy
! Component: 3250  -  total flux cleaned = -0.00332479 Jy
! Component: 3300  -  total flux cleaned = -0.00337707 Jy
! Component: 3350  -  total flux cleaned = -0.003429 Jy
! Component: 3400  -  total flux cleaned = -0.00348061 Jy
! Component: 3450  -  total flux cleaned = -0.00353186 Jy
! Component: 3500  -  total flux cleaned = -0.00363337 Jy
! Component: 3550  -  total flux cleaned = -0.00367371 Jy
! Component: 3600  -  total flux cleaned = -0.00370378 Jy
! Component: 3650  -  total flux cleaned = -0.00375346 Jy
! Component: 3700  -  total flux cleaned = -0.00385215 Jy
! Component: 3750  -  total flux cleaned = -0.00386184 Jy
! Component: 3800  -  total flux cleaned = -0.00390076 Jy
! Component: 3850  -  total flux cleaned = -0.00397792 Jy
! Component: 3900  -  total flux cleaned = -0.00401623 Jy
! Component: 3950  -  total flux cleaned = -0.0039971 Jy
! Component: 4000  -  total flux cleaned = -0.00404436 Jy
! Component: 4050  -  total flux cleaned = -0.00410077 Jy
! Total flux subtracted in 4096 components = -0.00410073 Jy
! Clean residual min=-0.000575 max=0.000495 Jy/beam
! Clean residual mean=-0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.202131 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 411 components and 0.202131 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1628-1415_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7798 x 1.897 at -0.8752 degrees (North through East)
! Clean map  min=-0.00098254  max=0.14961 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1628-1415_X_map.fits
wmodel /vlbi/uf001/uva//J1628-1415_X_map.mod
! Writing 411 model components to file: /vlbi/uf001/uva//J1628-1415_X_map.mod
wobs   /vlbi/uf001/uva//J1628-1415_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1628-1415_X_uvs.fits
wwins  /vlbi/uf001/uva//J1628-1415_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1628-1415_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.149609 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000153802 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.308409 0.308409 0.616818 1.23364 2.46727 4.93454 9.86908 19.7382 39.4763 78.9526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.149 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  972.735 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1628-1415_X_dfm.log closed on Mon Jan 14 03:43:18 2019