! Started logfile: /vlbi/uf001/uva//J1628+4734_S_dfm.log on Mon Jan 14 03:42:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1628+4734_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1628+4734_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.874074 visibilities/baseline/integration-bin.
! Found source: J1628+4734
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10266 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1628+4734_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007924Jy  sigma=21.266219
! Fit after  self-cal, rms=0.860362Jy  sigma=18.092886
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=5.467 mas, bpa=-15.95 degrees
! Estimated noise=0.559627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107103 Jy
! Component: 100  -  total flux cleaned = 0.15516 Jy
! Total flux subtracted in 100 components = 0.15516 Jy
! Clean residual min=-0.009139 max=0.023450 Jy/beam
! Clean residual mean=0.000060 rms=0.002801 Jy/beam
! Combined flux in latest and established models = 0.15516 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.15516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080401Jy  sigma=1.670233
! Fit after  self-cal, rms=0.079545Jy  sigma=1.652893
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285156 Jy
! Component: 100  -  total flux cleaned = 0.045059 Jy
! Total flux subtracted in 100 components = 0.045059 Jy
! Clean residual min=-0.006718 max=0.010025 Jy/beam
! Clean residual mean=0.000040 rms=0.001791 Jy/beam
! Combined flux in latest and established models = 0.200219 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.200219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066889Jy  sigma=1.349134
! Fit after  self-cal, rms=0.066688Jy  sigma=1.344536
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113045 Jy
! Component: 100  -  total flux cleaned = 0.0184646 Jy
! Total flux subtracted in 100 components = 0.0184646 Jy
! Clean residual min=-0.006677 max=0.007800 Jy/beam
! Clean residual mean=0.000032 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.218683 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 0.218683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064343Jy  sigma=1.284018
! Fit after  self-cal, rms=0.064298Jy  sigma=1.282883
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.658 mas, bmaj=6.077 mas, bpa=-14.87 degrees
! Estimated noise=0.34344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00905618 Jy
! Component: 100  -  total flux cleaned = 0.014915 Jy
! Component: 150  -  total flux cleaned = 0.0193582 Jy
! Component: 200  -  total flux cleaned = 0.0226577 Jy
! Total flux subtracted in 200 components = 0.0226577 Jy
! Clean residual min=-0.004341 max=0.004458 Jy/beam
! Clean residual mean=0.000029 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.241341 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 64 components and 0.241341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062832Jy  sigma=1.245683
! Fit after  self-cal, rms=0.062745Jy  sigma=1.243671
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.658 x 6.077 at -14.87 degrees (North through East)
! Clean map  min=-0.0042991  max=0.13225 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.95     KP        1.01     
!   LA        0.89     MK        0.98     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        0.96     KP        1.03     
!   LA        0.90     MK        0.97     NL        1.06     OV        0.96     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        0.96     KP        1.02     
!   LA        0.92     MK        0.94     NL        1.10     OV        0.98     
!   PT        1.02     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.062745Jy  sigma=1.243671
! Fit after  self-cal, rms=0.061943Jy  sigma=1.214976
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.633 mas, bmaj=6.13 mas, bpa=-15.48 degrees
! Estimated noise=0.339954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000561603 Jy
! Component: 100  -  total flux cleaned = -0.00111363 Jy
! Component: 150  -  total flux cleaned = -0.00138237 Jy
! Component: 200  -  total flux cleaned = -0.00150513 Jy
! Total flux subtracted in 200 components = -0.00150513 Jy
! Clean residual min=-0.003087 max=0.003012 Jy/beam
! Clean residual mean=0.000004 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.239836 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.239836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061768Jy  sigma=1.211179
! Fit after  self-cal, rms=0.061804Jy  sigma=1.210637
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061804Jy  sigma=1.210637
! Fit after  self-cal, rms=0.061420Jy  sigma=1.193446
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.622 mas, bmaj=6.143 mas, bpa=-15.43 degrees
! Estimated noise=0.340165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000838945 Jy
! Component: 100  -  total flux cleaned = -0.00111563 Jy
! Component: 150  -  total flux cleaned = -0.00134203 Jy
! Component: 200  -  total flux cleaned = -0.00144466 Jy
! Total flux subtracted in 200 components = -0.00144466 Jy
! Clean residual min=-0.002480 max=0.002220 Jy/beam
! Clean residual mean=-0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.238391 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.238391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061286Jy  sigma=1.190917
! Fit after  self-cal, rms=0.061286Jy  sigma=1.190535
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.29803e-05 Jy
! Component: 100  -  total flux cleaned = -0.000142422 Jy
! Component: 150  -  total flux cleaned = -0.000185671 Jy
! Component: 200  -  total flux cleaned = -0.000226929 Jy
! Total flux subtracted in 200 components = -0.000226929 Jy
! Clean residual min=-0.002379 max=0.002128 Jy/beam
! Clean residual mean=-0.000002 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.238164 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.238164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061209Jy  sigma=1.189090
! Fit after  self-cal, rms=0.061208Jy  sigma=1.188870
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061208Jy  sigma=1.188870
! Fit after  self-cal, rms=0.061198Jy  sigma=1.188721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.616 mas, bmaj=6.144 mas, bpa=-15.6 degrees
! Estimated noise=0.33958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000437184 Jy
! Component: 100  -  total flux cleaned = -0.0007474 Jy
! Component: 150  -  total flux cleaned = -0.000904564 Jy
! Component: 200  -  total flux cleaned = -0.000940085 Jy
! Total flux subtracted in 200 components = -0.000940085 Jy
! Clean residual min=-0.002259 max=0.002121 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.237224 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 113 components and 0.237224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061137Jy  sigma=1.187526
! Fit after  self-cal, rms=0.061140Jy  sigma=1.187348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.03962e-05 Jy
! Component: 100  -  total flux cleaned = -0.000122944 Jy
! Component: 150  -  total flux cleaned = -0.00015641 Jy
! Component: 200  -  total flux cleaned = -0.000218866 Jy
! Total flux subtracted in 200 components = -0.000218866 Jy
! Clean residual min=-0.002176 max=0.002054 Jy/beam
! Clean residual mean=-0.000002 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.237005 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.237005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061096Jy  sigma=1.186504
! Fit after  self-cal, rms=0.061096Jy  sigma=1.186343
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061096Jy  sigma=1.186343
! Fit after  self-cal, rms=0.061156Jy  sigma=1.186290
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.651 mas, bmaj=9.298 mas, bpa=-19.58 degrees
! Estimated noise=0.414032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000939038 Jy
! Component: 100  -  total flux cleaned = -0.00111487 Jy
! Component: 150  -  total flux cleaned = -0.00126174 Jy
! Component: 200  -  total flux cleaned = -0.00134749 Jy
! Total flux subtracted in 200 components = -0.00134749 Jy
! Clean residual min=-0.001818 max=0.001888 Jy/beam
! Clean residual mean=-0.000003 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.235658 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 126 components and 0.235658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061131Jy  sigma=1.185964
! Fit after  self-cal, rms=0.061131Jy  sigma=1.185774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.86075e-06 Jy
! Component: 100  -  total flux cleaned = -8.40715e-05 Jy
! Component: 150  -  total flux cleaned = -0.000168124 Jy
! Component: 200  -  total flux cleaned = -0.000201898 Jy
! Total flux subtracted in 200 components = -0.000201898 Jy
! Clean residual min=-0.001778 max=0.001870 Jy/beam
! Clean residual mean=-0.000002 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.235456 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 128 components and 0.235456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061122Jy  sigma=1.185654
! Fit after  self-cal, rms=0.061121Jy  sigma=1.185482
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=6.148 mas, bpa=-15.7 degrees
! Estimated noise=0.339493 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 6.148 at -15.7 degrees (North through East)
! Clean map  min=-0.0018499  max=0.12963 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.023 mas, bmaj=5.524 mas, bpa=-16.81 degrees
! Estimated noise=0.554364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109656 Jy
! Component: 100  -  total flux cleaned = 0.157567 Jy
! Component: 150  -  total flux cleaned = 0.183368 Jy
! Component: 200  -  total flux cleaned = 0.198646 Jy
! Total flux subtracted in 200 components = 0.198646 Jy
! Clean residual min=-0.005183 max=0.008092 Jy/beam
! Clean residual mean=0.000022 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.198646 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.198646 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=6.148 mas, bpa=-15.7 degrees
! Estimated noise=0.339493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126024 Jy
! Component: 100  -  total flux cleaned = 0.0201532 Jy
! Component: 150  -  total flux cleaned = 0.02505 Jy
! Component: 200  -  total flux cleaned = 0.028526 Jy
! Total flux subtracted in 200 components = 0.028526 Jy
! Clean residual min=-0.002317 max=0.002744 Jy/beam
! Clean residual mean=0.000009 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.227172 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 63 components and 0.227172 Jy
! Inverting map 
! Added new window around map position (-5.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0028226 Jy
! Component: 100  -  total flux cleaned = 0.00490567 Jy
! Component: 150  -  total flux cleaned = 0.00580713 Jy
! Component: 200  -  total flux cleaned = 0.00617876 Jy
! Total flux subtracted in 200 components = 0.00617876 Jy
! Clean residual min=-0.002168 max=0.001951 Jy/beam
! Clean residual mean=0.000001 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.233351 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 87 components and 0.233351 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.651 mas, bmaj=9.298 mas, bpa=-19.58 degrees
! Estimated noise=0.414032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145983 Jy
! Component: 100  -  total flux cleaned = 0.00172903 Jy
! Component: 150  -  total flux cleaned = 0.00180665 Jy
! Component: 200  -  total flux cleaned = 0.00189231 Jy
! Total flux subtracted in 200 components = 0.00189231 Jy
! Clean residual min=-0.001809 max=0.001836 Jy/beam
! Clean residual mean=-0.000002 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.235243 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.8893e-05 Jy
! Component: 100  -  total flux cleaned = 7.36847e-05 Jy
! Component: 150  -  total flux cleaned = 8.95545e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118404 Jy
! Total flux subtracted in 200 components = 0.000118404 Jy
! Clean residual min=-0.001800 max=0.001882 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.235362 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 132 components and 0.235362 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=6.148 mas, bpa=-15.7 degrees
! Estimated noise=0.339493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00081178 Jy
! Component: 100  -  total flux cleaned = -0.000862317 Jy
! Component: 150  -  total flux cleaned = -0.000763999 Jy
! Component: 200  -  total flux cleaned = -0.00067565 Jy
! Total flux subtracted in 200 components = -0.00067565 Jy
! Clean residual min=-0.002078 max=0.001820 Jy/beam
! Clean residual mean=-0.000000 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.234686 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 142 components and 0.234686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061076Jy  sigma=1.185050
! Fit after  self-cal, rms=0.061036Jy  sigma=1.183965
wmodel J1628+4734_S_map.mod
! Writing 142 model components to file: J1628+4734_S_map.mod
wobs   J1628+4734_S_uvs.fits
! Writing UV FITS file: J1628+4734_S_uvs.fits
wwins  J1628+4734_S_map.win
! wwins: Wrote 3 windows to J1628+4734_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147476 Jy
! Component: 100  -  total flux cleaned = -0.000240756 Jy
! Component: 150  -  total flux cleaned = -0.000448154 Jy
! Component: 200  -  total flux cleaned = -0.000763015 Jy
! Component: 250  -  total flux cleaned = -0.00101219 Jy
! Component: 300  -  total flux cleaned = -0.00111948 Jy
! Component: 350  -  total flux cleaned = -0.00122507 Jy
! Component: 400  -  total flux cleaned = -0.00130228 Jy
! Component: 450  -  total flux cleaned = -0.00132737 Jy
! Component: 500  -  total flux cleaned = -0.00135179 Jy
! Component: 550  -  total flux cleaned = -0.00132759 Jy
! Component: 600  -  total flux cleaned = -0.00132788 Jy
! Component: 650  -  total flux cleaned = -0.00139703 Jy
! Component: 700  -  total flux cleaned = -0.0013736 Jy
! Component: 750  -  total flux cleaned = -0.00139586 Jy
! Component: 800  -  total flux cleaned = -0.00128585 Jy
! Component: 850  -  total flux cleaned = -0.00130722 Jy
! Component: 900  -  total flux cleaned = -0.00130707 Jy
! Component: 950  -  total flux cleaned = -0.00124375 Jy
! Component: 1000  -  total flux cleaned = -0.00122334 Jy
! Component: 1050  -  total flux cleaned = -0.0012029 Jy
! Component: 1100  -  total flux cleaned = -0.00122305 Jy
! Component: 1150  -  total flux cleaned = -0.00122301 Jy
! Component: 1200  -  total flux cleaned = -0.00124234 Jy
! Component: 1250  -  total flux cleaned = -0.00116521 Jy
! Component: 1300  -  total flux cleaned = -0.00124137 Jy
! Component: 1350  -  total flux cleaned = -0.0012415 Jy
! Component: 1400  -  total flux cleaned = -0.00126005 Jy
! Component: 1450  -  total flux cleaned = -0.00127812 Jy
! Component: 1500  -  total flux cleaned = -0.00131396 Jy
! Component: 1550  -  total flux cleaned = -0.00134932 Jy
! Component: 1600  -  total flux cleaned = -0.00136699 Jy
! Component: 1650  -  total flux cleaned = -0.00140167 Jy
! Component: 1700  -  total flux cleaned = -0.00141905 Jy
! Component: 1750  -  total flux cleaned = -0.00140195 Jy
! Component: 1800  -  total flux cleaned = -0.00140208 Jy
! Component: 1850  -  total flux cleaned = -0.00143552 Jy
! Component: 1900  -  total flux cleaned = -0.00150178 Jy
! Component: 1950  -  total flux cleaned = -0.00158349 Jy
! Component: 2000  -  total flux cleaned = -0.00158354 Jy
! Component: 2050  -  total flux cleaned = -0.00163146 Jy
! Component: 2100  -  total flux cleaned = -0.00164728 Jy
! Component: 2150  -  total flux cleaned = -0.00167884 Jy
! Component: 2200  -  total flux cleaned = -0.0017411 Jy
! Component: 2250  -  total flux cleaned = -0.00174085 Jy
! Component: 2300  -  total flux cleaned = -0.00181706 Jy
! Component: 2350  -  total flux cleaned = -0.00178675 Jy
! Component: 2400  -  total flux cleaned = -0.00183189 Jy
! Component: 2450  -  total flux cleaned = -0.00184669 Jy
! Component: 2500  -  total flux cleaned = -0.00181737 Jy
! Component: 2550  -  total flux cleaned = -0.00187584 Jy
! Component: 2600  -  total flux cleaned = -0.00183269 Jy
! Component: 2650  -  total flux cleaned = -0.00189028 Jy
! Component: 2700  -  total flux cleaned = -0.00187615 Jy
! Component: 2750  -  total flux cleaned = -0.00187609 Jy
! Component: 2800  -  total flux cleaned = -0.00191807 Jy
! Component: 2850  -  total flux cleaned = -0.00193185 Jy
! Component: 2900  -  total flux cleaned = -0.00195933 Jy
! Component: 2950  -  total flux cleaned = -0.00191816 Jy
! Component: 3000  -  total flux cleaned = -0.00198599 Jy
! Component: 3050  -  total flux cleaned = -0.00194551 Jy
! Component: 3100  -  total flux cleaned = -0.00199899 Jy
! Component: 3150  -  total flux cleaned = -0.00198565 Jy
! Component: 3200  -  total flux cleaned = -0.0020251 Jy
! Component: 3250  -  total flux cleaned = -0.00201206 Jy
! Component: 3300  -  total flux cleaned = -0.00203808 Jy
! Component: 3350  -  total flux cleaned = -0.00210238 Jy
! Component: 3400  -  total flux cleaned = -0.00202558 Jy
! Component: 3450  -  total flux cleaned = -0.00201297 Jy
! Component: 3500  -  total flux cleaned = -0.00205089 Jy
! Component: 3550  -  total flux cleaned = -0.00207601 Jy
! Component: 3600  -  total flux cleaned = -0.00206352 Jy
! Component: 3650  -  total flux cleaned = -0.00206344 Jy
! Component: 3700  -  total flux cleaned = -0.00203887 Jy
! Component: 3750  -  total flux cleaned = -0.00202665 Jy
! Component: 3800  -  total flux cleaned = -0.00206309 Jy
! Component: 3850  -  total flux cleaned = -0.00202677 Jy
! Component: 3900  -  total flux cleaned = -0.00213503 Jy
! Component: 3950  -  total flux cleaned = -0.0021111 Jy
! Component: 4000  -  total flux cleaned = -0.00214683 Jy
! Component: 4050  -  total flux cleaned = -0.00212307 Jy
! Total flux subtracted in 4096 components = -0.00215838 Jy
! Clean residual min=-0.000712 max=0.000645 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.232527 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 440 components and 0.232527 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1628+4734_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 6.148 at -15.7 degrees (North through East)
! Clean map  min=-0.0012833  max=0.12972 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1628+4734_S_map.fits
wmodel /vlbi/uf001/uva//J1628+4734_S_map.mod
! Writing 440 model components to file: /vlbi/uf001/uva//J1628+4734_S_map.mod
wobs   /vlbi/uf001/uva//J1628+4734_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1628+4734_S_uvs.fits
wwins  /vlbi/uf001/uva//J1628+4734_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1628+4734_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.129717 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210902 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.487759 0.487759 0.975518 1.95104 3.90207 7.80414 15.6083 31.2166 62.4331
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  615.058 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1628+4734_S_dfm.log closed on Mon Jan 14 03:42:34 2019