! Started logfile: /vlbi/uf001/uva//J1624-0649_X_dfm.log on Mon Jan 14 03:41:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1624-0649_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1624-0649_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.990741 visibilities/baseline/integration-bin. ! Found source: J1624-0649 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38520 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1624-0649_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.006609Jy sigma=22.538865 ! Fit after self-cal, rms=0.908080Jy sigma=20.309277 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6951 mas, bmaj=1.657 mas, bpa=-0.9455 degrees ! Estimated noise=0.297383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708767 Jy ! Component: 100 - total flux cleaned = 0.0866991 Jy ! Total flux subtracted in 100 components = 0.0866991 Jy ! Clean residual min=-0.007936 max=0.021232 Jy/beam ! Clean residual mean=-0.000006 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.0866991 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0866991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086968Jy sigma=1.808625 ! Fit after self-cal, rms=0.086596Jy sigma=1.801152 ! Inverting map ! Added new window around map position (-2.6, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209977 Jy ! Component: 100 - total flux cleaned = 0.0310326 Jy ! Total flux subtracted in 100 components = 0.0310326 Jy ! Clean residual min=-0.007162 max=0.013224 Jy/beam ! Clean residual mean=-0.000006 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.117732 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.117732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079943Jy sigma=1.624370 ! Fit after self-cal, rms=0.079093Jy sigma=1.605009 ! Inverting map ! Added new window around map position (-4.8, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136933 Jy ! Component: 100 - total flux cleaned = 0.0224138 Jy ! Total flux subtracted in 100 components = 0.0224138 Jy ! Clean residual min=-0.005745 max=0.008731 Jy/beam ! Clean residual mean=-0.000005 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.140145 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.140145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075327Jy sigma=1.505574 ! Fit after self-cal, rms=0.074969Jy sigma=1.497680 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8767 mas, bmaj=2.015 mas, bpa=-1.394 degrees ! Estimated noise=0.165092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138614 Jy ! Component: 100 - total flux cleaned = 0.0232699 Jy ! Component: 150 - total flux cleaned = 0.0304713 Jy ! Component: 200 - total flux cleaned = 0.0362178 Jy ! Total flux subtracted in 200 components = 0.0362178 Jy ! Clean residual min=-0.006265 max=0.011684 Jy/beam ! Clean residual mean=-0.000003 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.176363 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 98 components and 0.176363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071892Jy sigma=1.410942 ! Fit after self-cal, rms=0.071588Jy sigma=1.403021 ! Inverting map ! Added new window around map position (-20.6, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123315 Jy ! Component: 100 - total flux cleaned = 0.0199467 Jy ! Component: 150 - total flux cleaned = 0.0259741 Jy ! Component: 200 - total flux cleaned = 0.0310715 Jy ! Total flux subtracted in 200 components = 0.0310715 Jy ! Clean residual min=-0.004594 max=0.008978 Jy/beam ! Clean residual mean=-0.000003 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.207435 Jy ! Performing phase self-cal ! Adding 94 model components to the UV plane model. ! The established model now contains 180 components and 0.207435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069037Jy sigma=1.336026 ! Fit after self-cal, rms=0.068803Jy sigma=1.328582 ! Inverting map ! Added new window around map position (-7.4, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00891912 Jy ! Component: 100 - total flux cleaned = 0.0150439 Jy ! Component: 150 - total flux cleaned = 0.020204 Jy ! Component: 200 - total flux cleaned = 0.0247346 Jy ! Total flux subtracted in 200 components = 0.0247346 Jy ! Clean residual min=-0.003871 max=0.004236 Jy/beam ! Clean residual mean=-0.000003 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.232169 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 237 components and 0.232169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067261Jy sigma=1.285919 ! Fit after self-cal, rms=0.067184Jy sigma=1.283965 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8767 x 2.015 at -1.394 degrees (North through East) ! Clean map min=-0.0035402 max=0.090659 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.04 KP 0.97 ! LA 0.99 MK 1.03 NL 1.04 OV 0.89 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.03 KP 0.97 ! LA 0.98 MK 1.05 NL 1.05 OV 0.91 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.01 KP 1.00 ! LA 0.97 MK 1.00 NL 1.04 OV 0.90 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.05 KP 0.98 ! LA 0.98 MK 1.03 NL 1.06 OV 0.90 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.04 KP 1.00 ! LA 1.00 MK 1.04 NL 1.06 OV 0.90 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.06 KP 0.99 ! LA 0.99 MK 1.02 NL 1.03 OV 0.92 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.09 KP 0.99 ! LA 0.97 MK 1.03 NL 1.06 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.06 KP 0.99 ! LA 0.99 MK 1.03 NL 1.04 OV 0.94 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.92 HN 1.08 KP 0.98 ! LA 0.97 MK 1.02 NL 1.04 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.03 KP 0.97 ! LA 0.97 MK 1.09 NL 1.03 OV 0.93 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.02 KP 1.00 ! LA 0.97 MK 1.00 NL 1.03 OV 0.91 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.06 KP 1.00 ! LA 0.98 MK 0.97 NL 1.05 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.067184Jy sigma=1.283965 ! Fit after self-cal, rms=0.066645Jy sigma=1.264959 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=2.049 mas, bpa=-1.072 degrees ! Estimated noise=0.160746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446843 Jy ! Component: 100 - total flux cleaned = 0.00786535 Jy ! Component: 150 - total flux cleaned = 0.0107226 Jy ! Component: 200 - total flux cleaned = 0.0131957 Jy ! Total flux subtracted in 200 components = 0.0131957 Jy ! Clean residual min=-0.002019 max=0.002994 Jy/beam ! Clean residual mean=-0.000004 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.245365 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 287 components and 0.245365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066233Jy sigma=1.251188 ! Fit after self-cal, rms=0.066275Jy sigma=1.250570 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066275Jy sigma=1.250570 ! Fit after self-cal, rms=0.067756Jy sigma=1.242835 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.057 mas, bpa=-1.068 degrees ! Estimated noise=0.161609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021954 Jy ! Component: 100 - total flux cleaned = 0.00366875 Jy ! Component: 150 - total flux cleaned = 0.00503637 Jy ! Component: 200 - total flux cleaned = 0.00624736 Jy ! Total flux subtracted in 200 components = 0.00624736 Jy ! Clean residual min=-0.001810 max=0.002156 Jy/beam ! Clean residual mean=-0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.251612 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 316 components and 0.251612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067629Jy sigma=1.238433 ! Fit after self-cal, rms=0.067645Jy sigma=1.238119 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.6, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172617 Jy ! Component: 100 - total flux cleaned = 0.00289767 Jy ! Component: 150 - total flux cleaned = 0.00382357 Jy ! Component: 200 - total flux cleaned = 0.00464614 Jy ! Total flux subtracted in 200 components = 0.00464614 Jy ! Clean residual min=-0.001669 max=0.002067 Jy/beam ! Clean residual mean=-0.000002 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.256259 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 336 components and 0.256259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067557Jy sigma=1.235347 ! Fit after self-cal, rms=0.067550Jy sigma=1.235151 ! Inverting map ! Added new window around map position (-9.8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019546 Jy ! Component: 100 - total flux cleaned = 0.00287351 Jy ! Component: 150 - total flux cleaned = 0.00372512 Jy ! Component: 200 - total flux cleaned = 0.00452603 Jy ! Total flux subtracted in 200 components = 0.00452603 Jy ! Clean residual min=-0.001556 max=0.001706 Jy/beam ! Clean residual mean=-0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.260785 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 358 components and 0.260785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067481Jy sigma=1.232753 ! Fit after self-cal, rms=0.067472Jy sigma=1.232632 ! Inverting map ! Added new window around map position (-23, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167016 Jy ! Component: 100 - total flux cleaned = 0.00264003 Jy ! Component: 150 - total flux cleaned = 0.0034064 Jy ! Component: 200 - total flux cleaned = 0.00396828 Jy ! Total flux subtracted in 200 components = 0.00396828 Jy ! Clean residual min=-0.001460 max=0.001630 Jy/beam ! Clean residual mean=-0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.264753 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 385 components and 0.264753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067419Jy sigma=1.231027 ! Fit after self-cal, rms=0.067410Jy sigma=1.230946 ! Inverting map ! Added new window around map position (7, 21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136278 Jy ! Component: 100 - total flux cleaned = 0.00211991 Jy ! Component: 150 - total flux cleaned = 0.00276375 Jy ! Component: 200 - total flux cleaned = 0.00335401 Jy ! Total flux subtracted in 200 components = 0.00335401 Jy ! Clean residual min=-0.001418 max=0.001569 Jy/beam ! Clean residual mean=-0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.268107 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 402 components and 0.268107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067373Jy sigma=1.229836 ! Fit after self-cal, rms=0.067369Jy sigma=1.229798 ! Inverting map ! Added new window around map position (16.2, -40.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146979 Jy ! Component: 100 - total flux cleaned = 0.00237392 Jy ! Component: 150 - total flux cleaned = 0.00308122 Jy ! Component: 200 - total flux cleaned = 0.00366667 Jy ! Total flux subtracted in 200 components = 0.00366667 Jy ! Clean residual min=-0.001442 max=0.001290 Jy/beam ! Clean residual mean=-0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.271774 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 431 components and 0.271774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067323Jy sigma=1.228752 ! Fit after self-cal, rms=0.067320Jy sigma=1.228695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067320Jy sigma=1.228695 ! Fit after self-cal, rms=0.068088Jy sigma=1.228105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8891 mas, bmaj=2.065 mas, bpa=-1.293 degrees ! Estimated noise=0.161711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172713 Jy ! Component: 100 - total flux cleaned = 0.000658341 Jy ! Component: 150 - total flux cleaned = 0.00107115 Jy ! Component: 200 - total flux cleaned = 0.00142944 Jy ! Total flux subtracted in 200 components = 0.00142944 Jy ! Clean residual min=-0.001258 max=0.001250 Jy/beam ! Clean residual mean=-0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.273203 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 458 components and 0.273203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068059Jy sigma=1.227430 ! Fit after self-cal, rms=0.068069Jy sigma=1.227384 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357907 Jy ! Component: 100 - total flux cleaned = 0.000640533 Jy ! Component: 150 - total flux cleaned = 0.000932063 Jy ! Component: 200 - total flux cleaned = 0.00118666 Jy ! Total flux subtracted in 200 components = 0.00118666 Jy ! Clean residual min=-0.001250 max=0.001236 Jy/beam ! Clean residual mean=-0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.27439 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 471 components and 0.27439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068052Jy sigma=1.226982 ! Fit after self-cal, rms=0.068050Jy sigma=1.226969 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068050Jy sigma=1.226969 ! Fit after self-cal, rms=0.068247Jy sigma=1.227038 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=3.757 mas, bpa=3.751 degrees ! Estimated noise=0.197249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115704 Jy ! Component: 100 - total flux cleaned = 0.00193151 Jy ! Component: 150 - total flux cleaned = 0.00235618 Jy ! Component: 200 - total flux cleaned = 0.00277274 Jy ! Total flux subtracted in 200 components = 0.00277274 Jy ! Clean residual min=-0.001478 max=0.001444 Jy/beam ! Clean residual mean=-0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.277162 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 501 components and 0.277162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068244Jy sigma=1.226713 ! Fit after self-cal, rms=0.068245Jy sigma=1.226678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388821 Jy ! Component: 100 - total flux cleaned = 0.000743895 Jy ! Component: 150 - total flux cleaned = 0.00114906 Jy ! Component: 200 - total flux cleaned = 0.00143308 Jy ! Total flux subtracted in 200 components = 0.00143308 Jy ! Clean residual min=-0.001449 max=0.001397 Jy/beam ! Clean residual mean=-0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.278596 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 515 components and 0.278596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068241Jy sigma=1.226502 ! Fit after self-cal, rms=0.068239Jy sigma=1.226486 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.067 mas, bpa=-1.403 degrees ! Estimated noise=0.161524 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.889 x 2.067 at -1.403 degrees (North through East) ! Clean map min=-0.0010892 max=0.088338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7022 mas, bmaj=1.692 mas, bpa=-0.8656 degrees ! Estimated noise=0.296138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0710384 Jy ! Component: 100 - total flux cleaned = 0.0989943 Jy ! Component: 150 - total flux cleaned = 0.116884 Jy ! Component: 200 - total flux cleaned = 0.129763 Jy ! Total flux subtracted in 200 components = 0.129763 Jy ! Clean residual min=-0.005059 max=0.007602 Jy/beam ! Clean residual mean=-0.000007 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.129762 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.129762 Jy ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.067 mas, bpa=-1.403 degrees ! Estimated noise=0.161524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178157 Jy ! Component: 100 - total flux cleaned = 0.0310333 Jy ! Component: 150 - total flux cleaned = 0.0417593 Jy ! Component: 200 - total flux cleaned = 0.0509332 Jy ! Total flux subtracted in 200 components = 0.0509332 Jy ! Clean residual min=-0.004422 max=0.006132 Jy/beam ! Clean residual mean=-0.000005 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.180696 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 105 components and 0.180696 Jy ! Inverting map ! Added new window around map position (-3.8, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080082 Jy ! Component: 100 - total flux cleaned = 0.0150042 Jy ! Component: 150 - total flux cleaned = 0.021203 Jy ! Component: 200 - total flux cleaned = 0.0267347 Jy ! Total flux subtracted in 200 components = 0.0267347 Jy ! Clean residual min=-0.003321 max=0.003885 Jy/beam ! Clean residual mean=-0.000005 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.20743 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 176 components and 0.20743 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=3.757 mas, bpa=3.751 degrees ! Estimated noise=0.197249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00929802 Jy ! Component: 100 - total flux cleaned = 0.0166687 Jy ! Component: 150 - total flux cleaned = 0.0228215 Jy ! Component: 200 - total flux cleaned = 0.0280437 Jy ! Total flux subtracted in 200 components = 0.0280437 Jy ! Clean residual min=-0.003558 max=0.003521 Jy/beam ! Clean residual mean=-0.000007 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.235474 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447404 Jy ! Component: 100 - total flux cleaned = 0.00834558 Jy ! Component: 150 - total flux cleaned = 0.0117302 Jy ! Component: 200 - total flux cleaned = 0.014714 Jy ! Total flux subtracted in 200 components = 0.014714 Jy ! Clean residual min=-0.002616 max=0.002360 Jy/beam ! Clean residual mean=-0.000006 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.250188 Jy ! Adding 187 model components to the UV plane model. ! The established model now contains 336 components and 0.250188 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.067 mas, bpa=-1.403 degrees ! Estimated noise=0.161524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025303 Jy ! Component: 100 - total flux cleaned = 0.00443649 Jy ! Component: 150 - total flux cleaned = 0.00592722 Jy ! Component: 200 - total flux cleaned = 0.00735175 Jy ! Total flux subtracted in 200 components = 0.00735175 Jy ! Clean residual min=-0.001666 max=0.001576 Jy/beam ! Clean residual mean=-0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.25754 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 375 components and 0.25754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068436Jy sigma=1.232209 ! Fit after self-cal, rms=0.068373Jy sigma=1.231248 wmodel J1624-0649_X_map.mod ! Writing 375 model components to file: J1624-0649_X_map.mod wobs J1624-0649_X_uvs.fits ! Writing UV FITS file: J1624-0649_X_uvs.fits wwins J1624-0649_X_map.win ! wwins: Wrote 12 windows to J1624-0649_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189279 Jy ! Component: 100 - total flux cleaned = -8.26359e-05 Jy ! Component: 150 - total flux cleaned = 6.90193e-05 Jy ! Component: 200 - total flux cleaned = 0.000264346 Jy ! Component: 250 - total flux cleaned = 0.000429245 Jy ! Component: 300 - total flux cleaned = 0.000520818 Jy ! Component: 350 - total flux cleaned = 0.000653777 Jy ! Component: 400 - total flux cleaned = 0.000696953 Jy ! Component: 450 - total flux cleaned = 0.000781011 Jy ! Component: 500 - total flux cleaned = 0.000842817 Jy ! Component: 550 - total flux cleaned = 0.000963604 Jy ! Component: 600 - total flux cleaned = 0.000923508 Jy ! Component: 650 - total flux cleaned = 0.000923853 Jy ! Component: 700 - total flux cleaned = 0.000981474 Jy ! Component: 750 - total flux cleaned = 0.00100051 Jy ! Component: 800 - total flux cleaned = 0.00103762 Jy ! Component: 850 - total flux cleaned = 0.0010192 Jy ! Component: 900 - total flux cleaned = 0.00100149 Jy ! Component: 950 - total flux cleaned = 0.00100193 Jy ! Component: 1000 - total flux cleaned = 0.00105409 Jy ! Component: 1050 - total flux cleaned = 0.00105374 Jy ! Component: 1100 - total flux cleaned = 0.00103648 Jy ! Component: 1150 - total flux cleaned = 0.00100363 Jy ! Component: 1200 - total flux cleaned = 0.000987464 Jy ! Component: 1250 - total flux cleaned = 0.000971563 Jy ! Component: 1300 - total flux cleaned = 0.00101927 Jy ! Component: 1350 - total flux cleaned = 0.000971635 Jy ! Component: 1400 - total flux cleaned = 0.0009246 Jy ! Component: 1450 - total flux cleaned = 0.000893718 Jy ! Component: 1500 - total flux cleaned = 0.000832884 Jy ! Component: 1550 - total flux cleaned = 0.000817709 Jy ! Component: 1600 - total flux cleaned = 0.000787924 Jy ! Component: 1650 - total flux cleaned = 0.000758487 Jy ! Component: 1700 - total flux cleaned = 0.000758566 Jy ! Component: 1750 - total flux cleaned = 0.000744385 Jy ! Component: 1800 - total flux cleaned = 0.000801815 Jy ! Component: 1850 - total flux cleaned = 0.000787555 Jy ! Component: 1900 - total flux cleaned = 0.000745145 Jy ! Component: 1950 - total flux cleaned = 0.000675721 Jy ! Component: 2000 - total flux cleaned = 0.000675901 Jy ! Component: 2050 - total flux cleaned = 0.000635088 Jy ! Component: 2100 - total flux cleaned = 0.000594734 Jy ! Component: 2150 - total flux cleaned = 0.000581522 Jy ! Component: 2200 - total flux cleaned = 0.000581548 Jy ! Component: 2250 - total flux cleaned = 0.000555449 Jy ! Component: 2300 - total flux cleaned = 0.000568583 Jy ! Component: 2350 - total flux cleaned = 0.000555853 Jy ! Component: 2400 - total flux cleaned = 0.000607104 Jy ! Component: 2450 - total flux cleaned = 0.000632355 Jy ! Component: 2500 - total flux cleaned = 0.000644765 Jy ! Component: 2550 - total flux cleaned = 0.000595159 Jy ! Component: 2600 - total flux cleaned = 0.000632219 Jy ! Component: 2650 - total flux cleaned = 0.00060745 Jy ! Component: 2700 - total flux cleaned = 0.000607429 Jy ! Component: 2750 - total flux cleaned = 0.000607493 Jy ! Component: 2800 - total flux cleaned = 0.000607322 Jy ! Component: 2850 - total flux cleaned = 0.000666712 Jy ! Component: 2900 - total flux cleaned = 0.000619482 Jy ! Component: 2950 - total flux cleaned = 0.000619423 Jy ! Component: 3000 - total flux cleaned = 0.000665997 Jy ! Component: 3050 - total flux cleaned = 0.000700541 Jy ! Component: 3100 - total flux cleaned = 0.000666118 Jy ! Component: 3150 - total flux cleaned = 0.000677512 Jy ! Component: 3200 - total flux cleaned = 0.000699922 Jy ! Component: 3250 - total flux cleaned = 0.00073336 Jy ! Component: 3300 - total flux cleaned = 0.00074447 Jy ! Component: 3350 - total flux cleaned = 0.000733309 Jy ! Component: 3400 - total flux cleaned = 0.000744123 Jy ! Component: 3450 - total flux cleaned = 0.000722307 Jy ! Component: 3500 - total flux cleaned = 0.000776419 Jy ! Component: 3550 - total flux cleaned = 0.0007978 Jy ! Component: 3600 - total flux cleaned = 0.000797883 Jy ! Component: 3650 - total flux cleaned = 0.00082965 Jy ! Component: 3700 - total flux cleaned = 0.000850561 Jy ! Component: 3750 - total flux cleaned = 0.00086106 Jy ! Component: 3800 - total flux cleaned = 0.000881857 Jy ! Component: 3850 - total flux cleaned = 0.000902514 Jy ! Component: 3900 - total flux cleaned = 0.000953841 Jy ! Component: 3950 - total flux cleaned = 0.000974201 Jy ! Component: 4000 - total flux cleaned = 0.000953957 Jy ! Component: 4050 - total flux cleaned = 0.00100427 Jy ! Total flux subtracted in 4096 components = 0.000944295 Jy ! Clean residual min=-0.000685 max=0.000517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.258484 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 693 components and 0.258484 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1624-0649_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.889 x 2.067 at -1.403 degrees (North through East) ! Clean map min=-0.0012273 max=0.087499 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1624-0649_X_map.fits wmodel /vlbi/uf001/uva//J1624-0649_X_map.mod ! Writing 693 model components to file: /vlbi/uf001/uva//J1624-0649_X_map.mod wobs /vlbi/uf001/uva//J1624-0649_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1624-0649_X_uvs.fits wwins /vlbi/uf001/uva//J1624-0649_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J1624-0649_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0874988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.62156 0.62156 1.24312 2.48624 4.97248 9.94495 19.8899 39.7798 79.5596 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.087 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 482.656 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1624-0649_X_dfm.log closed on Mon Jan 14 03:41:38 2019