! Started logfile: /vlbi/uf001/uva//J1609-0547_X_dfm.log on Mon Jan 14 03:36:10 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1609-0547_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1609-0547_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.926235 visibilities/baseline/integration-bin. ! Found source: J1609-0547 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36012 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1609-0547_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004996Jy sigma=22.984080 ! Fit after self-cal, rms=0.921924Jy sigma=21.033599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6978 mas, bmaj=1.795 mas, bpa=-4.013 degrees ! Estimated noise=0.293487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577414 Jy ! Component: 100 - total flux cleaned = 0.0781947 Jy ! Total flux subtracted in 100 components = 0.0781947 Jy ! Clean residual min=-0.003621 max=0.008829 Jy/beam ! Clean residual mean=0.000002 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.0781947 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0781947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068640Jy sigma=1.348110 ! Fit after self-cal, rms=0.068254Jy sigma=1.341072 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104557 Jy ! Component: 100 - total flux cleaned = 0.016666 Jy ! Total flux subtracted in 100 components = 0.016666 Jy ! Clean residual min=-0.002371 max=0.006679 Jy/beam ! Clean residual mean=0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0948607 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.0948607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065927Jy sigma=1.270181 ! Fit after self-cal, rms=0.065912Jy sigma=1.269605 ! Inverting map ! Added new window around map position (-1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608009 Jy ! Component: 100 - total flux cleaned = 0.00989326 Jy ! Total flux subtracted in 100 components = 0.00989326 Jy ! Clean residual min=-0.002139 max=0.003674 Jy/beam ! Clean residual mean=0.000000 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.104754 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.104754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065176Jy sigma=1.246314 ! Fit after self-cal, rms=0.065150Jy sigma=1.245351 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8937 mas, bmaj=2.159 mas, bpa=-4.303 degrees ! Estimated noise=0.167287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466746 Jy ! Component: 100 - total flux cleaned = 0.00746362 Jy ! Component: 150 - total flux cleaned = 0.0093178 Jy ! Component: 200 - total flux cleaned = 0.0106115 Jy ! Total flux subtracted in 200 components = 0.0106115 Jy ! Clean residual min=-0.002029 max=0.001986 Jy/beam ! Clean residual mean=-0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.115365 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 0.115365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064850Jy sigma=1.234363 ! Fit after self-cal, rms=0.064840Jy sigma=1.233891 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8937 x 2.159 at -4.303 degrees (North through East) ! Clean map min=-0.0021182 max=0.074883 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.99 KP 1.07 ! LA 1.00 MK 1.02 NL 1.00 OV 0.93 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.08 KP 1.02 ! LA 0.97 MK 1.07 NL 0.99 OV 0.94 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.09 KP 1.01 ! LA 1.00 MK 1.01 NL 0.97 OV 0.96 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.98 KP 1.02 ! LA 1.01 MK 1.02 NL 0.97 OV 0.96 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.00 KP 1.01 ! LA 1.00 MK 1.03 NL 1.01 OV 0.96 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.98 KP 1.03 ! LA 1.01 MK 1.03 NL 0.97 OV 0.98 ! PT 0.94 SC 0.85 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.06 KP 1.08 ! LA 0.98 MK 1.00 NL 1.01 OV 0.98 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 1.00 KP 1.04 ! LA 0.99 MK 0.98 NL 1.01 OV 0.96 ! PT 0.93 SC 0.89 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.10 KP 1.04 ! LA 1.00 MK 1.03 NL 0.99 OV 0.96 ! PT 0.90 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.01 KP 1.02 ! LA 1.00 MK 1.06 NL 1.01 OV 0.95 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.07 KP 1.06 ! LA 1.00 MK 0.97 NL 1.02 OV 0.93 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.01 KP 1.06 ! LA 0.96 MK 0.96 NL 1.03 OV 0.96 ! PT 0.91 SC 0.95 ! ! ! Fit before self-cal, rms=0.064840Jy sigma=1.233891 ! Fit after self-cal, rms=0.065523Jy sigma=1.227769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=2.163 mas, bpa=-3.894 degrees ! Estimated noise=0.166382 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181801 Jy ! Component: 100 - total flux cleaned = 0.00282935 Jy ! Component: 150 - total flux cleaned = 0.00340371 Jy ! Component: 200 - total flux cleaned = 0.00374635 Jy ! Total flux subtracted in 200 components = 0.00374635 Jy ! Clean residual min=-0.001207 max=0.001228 Jy/beam ! Clean residual mean=-0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.119112 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 0.119112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065467Jy sigma=1.226217 ! Fit after self-cal, rms=0.065502Jy sigma=1.226011 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065502Jy sigma=1.226011 ! Fit after self-cal, rms=0.066819Jy sigma=1.222358 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=2.163 mas, bpa=-3.856 degrees ! Estimated noise=0.166059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787553 Jy ! Component: 100 - total flux cleaned = 0.00106122 Jy ! Component: 150 - total flux cleaned = 0.00121422 Jy ! Component: 200 - total flux cleaned = 0.00126449 Jy ! Total flux subtracted in 200 components = 0.00126449 Jy ! Clean residual min=-0.000970 max=0.000960 Jy/beam ! Clean residual mean=-0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.120376 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 0.120376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066805Jy sigma=1.221964 ! Fit after self-cal, rms=0.066819Jy sigma=1.221857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145825 Jy ! Component: 100 - total flux cleaned = 0.000192166 Jy ! Component: 150 - total flux cleaned = 0.000234665 Jy ! Component: 200 - total flux cleaned = 0.000273559 Jy ! Total flux subtracted in 200 components = 0.000273559 Jy ! Clean residual min=-0.000961 max=0.000953 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.12065 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.12065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066812Jy sigma=1.221699 ! Fit after self-cal, rms=0.066809Jy sigma=1.221689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066809Jy sigma=1.221689 ! Fit after self-cal, rms=0.067272Jy sigma=1.221325 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8927 mas, bmaj=2.156 mas, bpa=-3.692 degrees ! Estimated noise=0.165388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186541 Jy ! Component: 100 - total flux cleaned = 0.000217019 Jy ! Component: 150 - total flux cleaned = 0.000202694 Jy ! Component: 200 - total flux cleaned = 0.000215448 Jy ! Total flux subtracted in 200 components = 0.000215448 Jy ! Clean residual min=-0.000948 max=0.000922 Jy/beam ! Clean residual mean=-0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.120865 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.120865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067265Jy sigma=1.221159 ! Fit after self-cal, rms=0.067270Jy sigma=1.221138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05439e-05 Jy ! Component: 100 - total flux cleaned = 3.51053e-05 Jy ! Component: 150 - total flux cleaned = 4.64744e-05 Jy ! Component: 200 - total flux cleaned = 6.81471e-05 Jy ! Total flux subtracted in 200 components = 6.81471e-05 Jy ! Clean residual min=-0.000939 max=0.000917 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.120933 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.120933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067265Jy sigma=1.221043 ! Fit after self-cal, rms=0.067263Jy sigma=1.221036 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067263Jy sigma=1.221036 ! Fit after self-cal, rms=0.067091Jy sigma=1.221016 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.247 mas, bmaj=3.79 mas, bpa=2.605 degrees ! Estimated noise=0.20537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399041 Jy ! Component: 100 - total flux cleaned = 0.00054941 Jy ! Component: 150 - total flux cleaned = 0.000608432 Jy ! Component: 200 - total flux cleaned = 0.000630049 Jy ! Total flux subtracted in 200 components = 0.000630049 Jy ! Clean residual min=-0.000934 max=0.000970 Jy/beam ! Clean residual mean=-0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.121563 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.121563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067089Jy sigma=1.220973 ! Fit after self-cal, rms=0.067087Jy sigma=1.220952 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01603e-05 Jy ! Component: 100 - total flux cleaned = 6.8154e-05 Jy ! Component: 150 - total flux cleaned = 8.631e-05 Jy ! Component: 200 - total flux cleaned = 9.72534e-05 Jy ! Total flux subtracted in 200 components = 9.72534e-05 Jy ! Clean residual min=-0.000922 max=0.000950 Jy/beam ! Clean residual mean=-0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.121661 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.121661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067086Jy sigma=1.220936 ! Fit after self-cal, rms=0.067085Jy sigma=1.220928 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8909 mas, bmaj=2.152 mas, bpa=-3.582 degrees ! Estimated noise=0.164965 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8909 x 2.152 at -3.582 degrees (North through East) ! Clean map min=-0.0008279 max=0.074089 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6941 mas, bmaj=1.786 mas, bpa=-3.29 degrees ! Estimated noise=0.288664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573202 Jy ! Component: 100 - total flux cleaned = 0.0782764 Jy ! Component: 150 - total flux cleaned = 0.088829 Jy ! Component: 200 - total flux cleaned = 0.0956456 Jy ! Total flux subtracted in 200 components = 0.0956456 Jy ! Clean residual min=-0.002008 max=0.003855 Jy/beam ! Clean residual mean=0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0956456 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0956456 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8909 mas, bmaj=2.152 mas, bpa=-3.582 degrees ! Estimated noise=0.164965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709527 Jy ! Component: 100 - total flux cleaned = 0.011321 Jy ! Component: 150 - total flux cleaned = 0.0140699 Jy ! Component: 200 - total flux cleaned = 0.0161326 Jy ! Total flux subtracted in 200 components = 0.0161326 Jy ! Clean residual min=-0.001204 max=0.001457 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.111778 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 0.111778 Jy ! Inverting map ! Added new window around map position (1, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167799 Jy ! Component: 100 - total flux cleaned = 0.00297746 Jy ! Component: 150 - total flux cleaned = 0.00403994 Jy ! Component: 200 - total flux cleaned = 0.00493225 Jy ! Total flux subtracted in 200 components = 0.00493225 Jy ! Clean residual min=-0.001023 max=0.000922 Jy/beam ! Clean residual mean=-0.000000 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.11671 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 0.11671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.247 mas, bmaj=3.79 mas, bpa=2.605 degrees ! Estimated noise=0.20537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116169 Jy ! Component: 100 - total flux cleaned = 0.0019616 Jy ! Component: 150 - total flux cleaned = 0.00257778 Jy ! Component: 200 - total flux cleaned = 0.00307394 Jy ! Total flux subtracted in 200 components = 0.00307394 Jy ! Clean residual min=-0.001013 max=0.000943 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.119784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028081 Jy ! Component: 100 - total flux cleaned = 0.000534772 Jy ! Component: 150 - total flux cleaned = 0.00072948 Jy ! Component: 200 - total flux cleaned = 0.000888959 Jy ! Total flux subtracted in 200 components = 0.000888959 Jy ! Clean residual min=-0.000928 max=0.000921 Jy/beam ! Clean residual mean=-0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.120673 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 125 components and 0.120673 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8909 mas, bmaj=2.152 mas, bpa=-3.582 degrees ! Estimated noise=0.164965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68011e-05 Jy ! Component: 100 - total flux cleaned = -0.00011892 Jy ! Component: 150 - total flux cleaned = -0.000102521 Jy ! Component: 200 - total flux cleaned = -8.80558e-05 Jy ! Total flux subtracted in 200 components = -8.80558e-05 Jy ! Clean residual min=-0.000906 max=0.000879 Jy/beam ! Clean residual mean=-0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.120585 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 140 components and 0.120585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067081Jy sigma=1.220704 ! Fit after self-cal, rms=0.067079Jy sigma=1.220639 wmodel J1609-0547_X_map.mod ! Writing 140 model components to file: J1609-0547_X_map.mod wobs J1609-0547_X_uvs.fits ! Writing UV FITS file: J1609-0547_X_uvs.fits wwins J1609-0547_X_map.win ! wwins: Wrote 5 windows to J1609-0547_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.22287e-05 Jy ! Component: 100 - total flux cleaned = -7.23938e-05 Jy ! Component: 150 - total flux cleaned = -7.20904e-05 Jy ! Component: 200 - total flux cleaned = -4.42728e-05 Jy ! Component: 250 - total flux cleaned = -1.71563e-05 Jy ! Component: 300 - total flux cleaned = 2.27962e-05 Jy ! Component: 350 - total flux cleaned = 6.19462e-05 Jy ! Component: 400 - total flux cleaned = 8.74857e-05 Jy ! Component: 450 - total flux cleaned = 0.000112489 Jy ! Component: 500 - total flux cleaned = 0.000112392 Jy ! Component: 550 - total flux cleaned = 0.000124757 Jy ! Component: 600 - total flux cleaned = 0.000148719 Jy ! Component: 650 - total flux cleaned = 0.000172145 Jy ! Component: 700 - total flux cleaned = 0.000183505 Jy ! Component: 750 - total flux cleaned = 0.000194852 Jy ! Component: 800 - total flux cleaned = 0.000206029 Jy ! Component: 850 - total flux cleaned = 0.000194751 Jy ! Component: 900 - total flux cleaned = 0.000161957 Jy ! Component: 950 - total flux cleaned = 0.000216302 Jy ! Component: 1000 - total flux cleaned = 0.000216207 Jy ! Component: 1050 - total flux cleaned = 0.000216211 Jy ! Component: 1100 - total flux cleaned = 0.000268769 Jy ! Component: 1150 - total flux cleaned = 0.000320725 Jy ! Component: 1200 - total flux cleaned = 0.000310389 Jy ! Component: 1250 - total flux cleaned = 0.000330796 Jy ! Component: 1300 - total flux cleaned = 0.000320639 Jy ! Component: 1350 - total flux cleaned = 0.000340818 Jy ! Component: 1400 - total flux cleaned = 0.000350871 Jy ! Component: 1450 - total flux cleaned = 0.000400207 Jy ! Component: 1500 - total flux cleaned = 0.000351406 Jy ! Component: 1550 - total flux cleaned = 0.000390322 Jy ! Component: 1600 - total flux cleaned = 0.000428806 Jy ! Component: 1650 - total flux cleaned = 0.000447948 Jy ! Component: 1700 - total flux cleaned = 0.00045733 Jy ! Component: 1750 - total flux cleaned = 0.000503969 Jy ! Component: 1800 - total flux cleaned = 0.00055026 Jy ! Component: 1850 - total flux cleaned = 0.000504117 Jy ! Component: 1900 - total flux cleaned = 0.00054089 Jy ! Component: 1950 - total flux cleaned = 0.000549884 Jy ! Component: 2000 - total flux cleaned = 0.000594945 Jy ! Component: 2050 - total flux cleaned = 0.000594858 Jy ! Component: 2100 - total flux cleaned = 0.000594833 Jy ! Component: 2150 - total flux cleaned = 0.000559416 Jy ! Component: 2200 - total flux cleaned = 0.000603268 Jy ! Component: 2250 - total flux cleaned = 0.000594544 Jy ! Component: 2300 - total flux cleaned = 0.000603185 Jy ! Component: 2350 - total flux cleaned = 0.000586003 Jy ! Component: 2400 - total flux cleaned = 0.000585991 Jy ! Component: 2450 - total flux cleaned = 0.000585994 Jy ! Component: 2500 - total flux cleaned = 0.000585949 Jy ! Component: 2550 - total flux cleaned = 0.00056091 Jy ! Component: 2600 - total flux cleaned = 0.000536131 Jy ! Component: 2650 - total flux cleaned = 0.000552615 Jy ! Component: 2700 - total flux cleaned = 0.000552632 Jy ! Component: 2750 - total flux cleaned = 0.000528181 Jy ! Component: 2800 - total flux cleaned = 0.000552377 Jy ! Component: 2850 - total flux cleaned = 0.000528214 Jy ! Component: 2900 - total flux cleaned = 0.000520288 Jy ! Component: 2950 - total flux cleaned = 0.000520315 Jy ! Component: 3000 - total flux cleaned = 0.000480926 Jy ! Component: 3050 - total flux cleaned = 0.000457382 Jy ! Component: 3100 - total flux cleaned = 0.000465235 Jy ! Component: 3150 - total flux cleaned = 0.000472951 Jy ! Component: 3200 - total flux cleaned = 0.000434426 Jy ! Component: 3250 - total flux cleaned = 0.00041917 Jy ! Component: 3300 - total flux cleaned = 0.000419131 Jy ! Component: 3350 - total flux cleaned = 0.000403983 Jy ! Component: 3400 - total flux cleaned = 0.000381317 Jy ! Component: 3450 - total flux cleaned = 0.000336334 Jy ! Component: 3500 - total flux cleaned = 0.000321492 Jy ! Component: 3550 - total flux cleaned = 0.000321447 Jy ! Component: 3600 - total flux cleaned = 0.000291908 Jy ! Component: 3650 - total flux cleaned = 0.000313979 Jy ! Component: 3700 - total flux cleaned = 0.00027011 Jy ! Component: 3750 - total flux cleaned = 0.000233774 Jy ! Component: 3800 - total flux cleaned = 0.000212166 Jy ! Component: 3850 - total flux cleaned = 0.000219417 Jy ! Component: 3900 - total flux cleaned = 0.000190764 Jy ! Component: 3950 - total flux cleaned = 0.000197859 Jy ! Component: 4000 - total flux cleaned = 0.000162426 Jy ! Component: 4050 - total flux cleaned = 0.000148329 Jy ! Total flux subtracted in 4096 components = 0.000141262 Jy ! Clean residual min=-0.000442 max=0.000424 Jy/beam ! Clean residual mean=-0.000000 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.120727 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 446 components and 0.120727 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1609-0547_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8909 x 2.152 at -3.582 degrees (North through East) ! Clean map min=-0.00064885 max=0.074261 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1609-0547_X_map.fits wmodel /vlbi/uf001/uva//J1609-0547_X_map.mod ! Writing 446 model components to file: /vlbi/uf001/uva//J1609-0547_X_map.mod wobs /vlbi/uf001/uva//J1609-0547_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1609-0547_X_uvs.fits wwins /vlbi/uf001/uva//J1609-0547_X_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1609-0547_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0742608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.491189 0.491189 0.982379 1.96476 3.92951 7.85903 15.7181 31.4361 62.8722 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.074 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 610.762 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1609-0547_X_dfm.log closed on Mon Jan 14 03:36:16 2019