! Started logfile: /vlbi/uf001/uva//J1606+1814_S_dfm.log on Mon Jan 14 03:34:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1606+1814_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1606+1814_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.978836 visibilities/baseline/integration-bin.
! Found source: J1606+1814
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5550 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1606+1814_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001197Jy  sigma=20.643262
! Fit after  self-cal, rms=0.879561Jy  sigma=18.130695
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=6.283 mas, bpa=-3.343 degrees
! Estimated noise=0.642525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0951974 Jy
! Component: 100  -  total flux cleaned = 0.118065 Jy
! Total flux subtracted in 100 components = 0.118065 Jy
! Clean residual min=-0.005249 max=0.008541 Jy/beam
! Clean residual mean=0.000004 rms=0.001529 Jy/beam
! Combined flux in latest and established models = 0.118065 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.118065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068951Jy  sigma=1.339708
! Fit after  self-cal, rms=0.068805Jy  sigma=1.337822
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=7.005 mas, bpa=-3.018 degrees
! Estimated noise=0.506984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110953 Jy
! Component: 100  -  total flux cleaned = 0.0163679 Jy
! Component: 150  -  total flux cleaned = 0.0194805 Jy
! Component: 200  -  total flux cleaned = 0.0214066 Jy
! Total flux subtracted in 200 components = 0.0214066 Jy
! Clean residual min=-0.004982 max=0.005568 Jy/beam
! Clean residual mean=0.000037 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.139472 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 0.139472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067380Jy  sigma=1.297802
! Fit after  self-cal, rms=0.067346Jy  sigma=1.296916
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.544 x 7.005 at -3.018 degrees (North through East)
! Clean map  min=-0.0049904  max=0.12177 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.91     KP        0.97     
!   LA        0.93     MK        0.98     NL        0.98     OV        0.99     
!   PT        1.07     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.12     KP        0.94     
!   LA        0.95     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.23     KP        0.95     
!   LA        0.92     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.92     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.067346Jy  sigma=1.296916
! Fit after  self-cal, rms=0.066486Jy  sigma=1.278872
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.577 mas, bmaj=7.086 mas, bpa=-3.096 degrees
! Estimated noise=0.502138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00227421 Jy
! Component: 100  -  total flux cleaned = -0.00351212 Jy
! Component: 150  -  total flux cleaned = -0.00394589 Jy
! Component: 200  -  total flux cleaned = -0.00410422 Jy
! Total flux subtracted in 200 components = -0.00410422 Jy
! Clean residual min=-0.004745 max=0.004853 Jy/beam
! Clean residual mean=0.000040 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.135368 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.135368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066347Jy  sigma=1.278214
! Fit after  self-cal, rms=0.066349Jy  sigma=1.277800
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066349Jy  sigma=1.277800
! Fit after  self-cal, rms=0.076109Jy  sigma=1.210043
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.568 mas, bmaj=7.046 mas, bpa=-2.977 degrees
! Estimated noise=0.500951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352737 Jy
! Component: 100  -  total flux cleaned = 0.000577217 Jy
! Component: 150  -  total flux cleaned = 0.000706313 Jy
! Component: 200  -  total flux cleaned = 0.000767252 Jy
! Total flux subtracted in 200 components = 0.000767252 Jy
! Clean residual min=-0.002682 max=0.003217 Jy/beam
! Clean residual mean=-0.000008 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.136135 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.136135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076093Jy  sigma=1.209595
! Fit after  self-cal, rms=0.076383Jy  sigma=1.208529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219431 Jy
! Component: 100  -  total flux cleaned = 0.00239323 Jy
! Component: 150  -  total flux cleaned = 0.00234421 Jy
! Component: 200  -  total flux cleaned = 0.0021816 Jy
! Total flux subtracted in 200 components = 0.0021816 Jy
! Clean residual min=-0.002504 max=0.002989 Jy/beam
! Clean residual mean=-0.000008 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.138316 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.138316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076228Jy  sigma=1.205451
! Fit after  self-cal, rms=0.076232Jy  sigma=1.205249
! Inverting map 
! Added new window around map position (28.5, 106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255732 Jy
! Component: 100  -  total flux cleaned = 0.00311878 Jy
! Component: 150  -  total flux cleaned = 0.00325785 Jy
! Component: 200  -  total flux cleaned = 0.00334145 Jy
! Total flux subtracted in 200 components = 0.00334145 Jy
! Clean residual min=-0.002425 max=0.002323 Jy/beam
! Clean residual mean=-0.000009 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.141658 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 101 components and 0.141658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076118Jy  sigma=1.202534
! Fit after  self-cal, rms=0.076113Jy  sigma=1.202397
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076113Jy  sigma=1.202397
! Fit after  self-cal, rms=0.076578Jy  sigma=1.201758
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=7.032 mas, bpa=-2.954 degrees
! Estimated noise=0.499935 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011185 Jy
! Component: 100  -  total flux cleaned = 0.00127679 Jy
! Component: 150  -  total flux cleaned = 0.00127707 Jy
! Component: 200  -  total flux cleaned = 0.00127804 Jy
! Total flux subtracted in 200 components = 0.00127804 Jy
! Clean residual min=-0.002292 max=0.002174 Jy/beam
! Clean residual mean=-0.000009 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.142936 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 113 components and 0.142936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076529Jy  sigma=1.200838
! Fit after  self-cal, rms=0.076536Jy  sigma=1.200798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243879 Jy
! Component: 100  -  total flux cleaned = 0.000244311 Jy
! Component: 150  -  total flux cleaned = 0.000245328 Jy
! Component: 200  -  total flux cleaned = 0.000272463 Jy
! Total flux subtracted in 200 components = 0.000272463 Jy
! Clean residual min=-0.002277 max=0.002133 Jy/beam
! Clean residual mean=-0.000009 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.143208 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 124 components and 0.143208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076509Jy  sigma=1.200334
! Fit after  self-cal, rms=0.076509Jy  sigma=1.200324
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076509Jy  sigma=1.200324
! Fit after  self-cal, rms=0.076473Jy  sigma=1.200216
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.443 mas, bmaj=10.34 mas, bpa=-2.574 degrees
! Estimated noise=0.619773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139914 Jy
! Component: 100  -  total flux cleaned = 0.00039568 Jy
! Component: 150  -  total flux cleaned = 0.000460784 Jy
! Component: 200  -  total flux cleaned = 0.000555139 Jy
! Total flux subtracted in 200 components = 0.000555139 Jy
! Clean residual min=-0.003338 max=0.002154 Jy/beam
! Clean residual mean=-0.000017 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.143764 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 139 components and 0.143763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076459Jy  sigma=1.200050
! Fit after  self-cal, rms=0.076459Jy  sigma=1.200032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31545e-05 Jy
! Component: 100  -  total flux cleaned = 9.22824e-05 Jy
! Component: 150  -  total flux cleaned = 9.22617e-05 Jy
! Component: 200  -  total flux cleaned = 7.80813e-05 Jy
! Total flux subtracted in 200 components = 7.80813e-05 Jy
! Clean residual min=-0.003305 max=0.002157 Jy/beam
! Clean residual mean=-0.000017 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.143842 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 150 components and 0.143842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076452Jy  sigma=1.199958
! Fit after  self-cal, rms=0.076450Jy  sigma=1.199954
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.554 mas, bmaj=7.026 mas, bpa=-2.966 degrees
! Estimated noise=0.500181 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.554 x 7.026 at -2.966 degrees (North through East)
! Clean map  min=-0.0022058  max=0.12064 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.943 mas, bmaj=6.275 mas, bpa=-3.069 degrees
! Estimated noise=0.634128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0938139 Jy
! Component: 100  -  total flux cleaned = 0.117144 Jy
! Component: 150  -  total flux cleaned = 0.126342 Jy
! Component: 200  -  total flux cleaned = 0.131392 Jy
! Total flux subtracted in 200 components = 0.131392 Jy
! Clean residual min=-0.003125 max=0.003351 Jy/beam
! Clean residual mean=-0.000010 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.131392 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.131392 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.554 mas, bmaj=7.026 mas, bpa=-2.966 degrees
! Estimated noise=0.500181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452236 Jy
! Component: 100  -  total flux cleaned = 0.00755627 Jy
! Component: 150  -  total flux cleaned = 0.0091134 Jy
! Component: 200  -  total flux cleaned = 0.00986468 Jy
! Total flux subtracted in 200 components = 0.00986468 Jy
! Clean residual min=-0.002385 max=0.002395 Jy/beam
! Clean residual mean=-0.000009 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.141257 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 48 components and 0.141257 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.443 mas, bmaj=10.34 mas, bpa=-2.574 degrees
! Estimated noise=0.619773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000581021 Jy
! Component: 100  -  total flux cleaned = 0.00140725 Jy
! Component: 150  -  total flux cleaned = 0.00192448 Jy
! Component: 200  -  total flux cleaned = 0.0022831 Jy
! Total flux subtracted in 200 components = 0.0022831 Jy
! Clean residual min=-0.003344 max=0.002236 Jy/beam
! Clean residual mean=-0.000017 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.14354 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017478 Jy
! Component: 100  -  total flux cleaned = 0.000267228 Jy
! Component: 150  -  total flux cleaned = 0.000324059 Jy
! Component: 200  -  total flux cleaned = 0.000402708 Jy
! Total flux subtracted in 200 components = 0.000402708 Jy
! Clean residual min=-0.003303 max=0.002193 Jy/beam
! Clean residual mean=-0.000017 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.143943 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 89 components and 0.143943 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.554 mas, bmaj=7.026 mas, bpa=-2.966 degrees
! Estimated noise=0.500181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.1738e-05 Jy
! Component: 100  -  total flux cleaned = -9.31415e-06 Jy
! Component: 150  -  total flux cleaned = -1.09991e-05 Jy
! Component: 200  -  total flux cleaned = -4.81756e-05 Jy
! Total flux subtracted in 200 components = -4.81756e-05 Jy
! Clean residual min=-0.002229 max=0.002211 Jy/beam
! Clean residual mean=-0.000009 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.143894 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.143894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076476Jy  sigma=1.200862
! Fit after  self-cal, rms=0.076480Jy  sigma=1.200769
wmodel J1606+1814_S_map.mod
! Writing 111 model components to file: J1606+1814_S_map.mod
wobs   J1606+1814_S_uvs.fits
! Writing UV FITS file: J1606+1814_S_uvs.fits
wwins  J1606+1814_S_map.win
! wwins: Wrote 3 windows to J1606+1814_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.87808e-05 Jy
! Component: 100  -  total flux cleaned = 4.08847e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112759 Jy
! Component: 200  -  total flux cleaned = 0.000113491 Jy
! Component: 250  -  total flux cleaned = 0.000113812 Jy
! Component: 300  -  total flux cleaned = 8.0853e-05 Jy
! Component: 350  -  total flux cleaned = 8.12749e-05 Jy
! Component: 400  -  total flux cleaned = -1.2585e-05 Jy
! Component: 450  -  total flux cleaned = -4.29757e-05 Jy
! Component: 500  -  total flux cleaned = -7.30554e-05 Jy
! Component: 550  -  total flux cleaned = -0.0001329 Jy
! Component: 600  -  total flux cleaned = -0.000220714 Jy
! Component: 650  -  total flux cleaned = -0.000163335 Jy
! Component: 700  -  total flux cleaned = -0.000191413 Jy
! Component: 750  -  total flux cleaned = -0.00013558 Jy
! Component: 800  -  total flux cleaned = -8.1133e-05 Jy
! Component: 850  -  total flux cleaned = -5.49661e-05 Jy
! Component: 900  -  total flux cleaned = -5.53111e-05 Jy
! Component: 950  -  total flux cleaned = -5.55521e-05 Jy
! Component: 1000  -  total flux cleaned = -3.39776e-06 Jy
! Component: 1050  -  total flux cleaned = 2.23473e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000123489 Jy
! Component: 1150  -  total flux cleaned = 0.000123409 Jy
! Component: 1200  -  total flux cleaned = 0.000147937 Jy
! Component: 1250  -  total flux cleaned = 0.000220748 Jy
! Component: 1300  -  total flux cleaned = 0.000196855 Jy
! Component: 1350  -  total flux cleaned = 0.000268303 Jy
! Component: 1400  -  total flux cleaned = 0.000409041 Jy
! Component: 1450  -  total flux cleaned = 0.000501851 Jy
! Component: 1500  -  total flux cleaned = 0.000593306 Jy
! Component: 1550  -  total flux cleaned = 0.000683935 Jy
! Component: 1600  -  total flux cleaned = 0.000773499 Jy
! Component: 1650  -  total flux cleaned = 0.000861808 Jy
! Component: 1700  -  total flux cleaned = 0.000905382 Jy
! Component: 1750  -  total flux cleaned = 0.000992635 Jy
! Component: 1800  -  total flux cleaned = 0.00114261 Jy
! Component: 1850  -  total flux cleaned = 0.00112144 Jy
! Component: 1900  -  total flux cleaned = 0.00118457 Jy
! Component: 1950  -  total flux cleaned = 0.00118458 Jy
! Component: 2000  -  total flux cleaned = 0.0012881 Jy
! Component: 2050  -  total flux cleaned = 0.00126787 Jy
! Component: 2100  -  total flux cleaned = 0.00134922 Jy
! Component: 2150  -  total flux cleaned = 0.00132926 Jy
! Component: 2200  -  total flux cleaned = 0.00142924 Jy
! Component: 2250  -  total flux cleaned = 0.00146916 Jy
! Component: 2300  -  total flux cleaned = 0.00148884 Jy
! Component: 2350  -  total flux cleaned = 0.00143039 Jy
! Component: 2400  -  total flux cleaned = 0.00150789 Jy
! Component: 2450  -  total flux cleaned = 0.00150804 Jy
! Component: 2500  -  total flux cleaned = 0.00158455 Jy
! Component: 2550  -  total flux cleaned = 0.00164138 Jy
! Component: 2600  -  total flux cleaned = 0.00171628 Jy
! Component: 2650  -  total flux cleaned = 0.00160417 Jy
! Component: 2700  -  total flux cleaned = 0.00162292 Jy
! Component: 2750  -  total flux cleaned = 0.00164133 Jy
! Component: 2800  -  total flux cleaned = 0.001751 Jy
! Component: 2850  -  total flux cleaned = 0.00180538 Jy
! Component: 2900  -  total flux cleaned = 0.00184134 Jy
! Component: 2950  -  total flux cleaned = 0.00185911 Jy
! Component: 3000  -  total flux cleaned = 0.00187669 Jy
! Component: 3050  -  total flux cleaned = 0.00185905 Jy
! Component: 3100  -  total flux cleaned = 0.00185915 Jy
! Component: 3150  -  total flux cleaned = 0.00201584 Jy
! Component: 3200  -  total flux cleaned = 0.00205051 Jy
! Component: 3250  -  total flux cleaned = 0.00206753 Jy
! Component: 3300  -  total flux cleaned = 0.00208469 Jy
! Component: 3350  -  total flux cleaned = 0.00218648 Jy
! Component: 3400  -  total flux cleaned = 0.00220311 Jy
! Component: 3450  -  total flux cleaned = 0.00225319 Jy
! Component: 3500  -  total flux cleaned = 0.00223656 Jy
! Component: 3550  -  total flux cleaned = 0.00226975 Jy
! Component: 3600  -  total flux cleaned = 0.00231912 Jy
! Component: 3650  -  total flux cleaned = 0.00238439 Jy
! Component: 3700  -  total flux cleaned = 0.00240066 Jy
! Component: 3750  -  total flux cleaned = 0.00243324 Jy
! Component: 3800  -  total flux cleaned = 0.00243313 Jy
! Component: 3850  -  total flux cleaned = 0.0025292 Jy
! Component: 3900  -  total flux cleaned = 0.00259265 Jy
! Component: 3950  -  total flux cleaned = 0.00267162 Jy
! Component: 4000  -  total flux cleaned = 0.00275023 Jy
! Component: 4050  -  total flux cleaned = 0.00281281 Jy
! Total flux subtracted in 4096 components = 0.0028438 Jy
! Clean residual min=-0.000888 max=0.000938 Jy/beam
! Clean residual mean=-0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.146738 Jy
keep
! Adding 337 model components to the UV plane model.
! The established model now contains 448 components and 0.146738 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1606+1814_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.554 x 7.026 at -2.966 degrees (North through East)
! Clean map  min=-0.0021405  max=0.1207 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1606+1814_S_map.fits
wmodel /vlbi/uf001/uva//J1606+1814_S_map.mod
! Writing 448 model components to file: /vlbi/uf001/uva//J1606+1814_S_map.mod
wobs   /vlbi/uf001/uva//J1606+1814_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1606+1814_S_uvs.fits
wwins  /vlbi/uf001/uva//J1606+1814_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1606+1814_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.120701 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000292108 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.72603 0.72603 1.45206 2.90412 5.80824 11.6165 23.233 46.4659 92.9319
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.12 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  413.206 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1606+1814_S_dfm.log closed on Mon Jan 14 03:34:33 2019