! Started logfile: /vlbi/uf001/uva//J1549+5038_X_dfm.log on Mon Jan 14 03:28:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1549+5038_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1549+5038_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.848457 visibilities/baseline/integration-bin. ! Found source: J1549+5038 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32988 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1549+5038_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.138376Jy sigma=22.225361 ! Fit after self-cal, rms=0.509004Jy sigma=10.055541 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8869 mas, bmaj=0.9697 mas, bpa=-47.45 degrees ! Estimated noise=0.427872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370622 Jy ! Component: 100 - total flux cleaned = 0.455751 Jy ! Total flux subtracted in 100 components = 0.455751 Jy ! Clean residual min=-0.021672 max=0.048765 Jy/beam ! Clean residual mean=0.000114 rms=0.004448 Jy/beam ! Combined flux in latest and established models = 0.455751 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.455751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.143504Jy sigma=2.688628 ! Fit after self-cal, rms=0.143466Jy sigma=2.687962 ! Inverting map ! Added new window around map position (-5.8, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484266 Jy ! Component: 100 - total flux cleaned = 0.0810019 Jy ! Total flux subtracted in 100 components = 0.0810019 Jy ! Clean residual min=-0.017195 max=0.030594 Jy/beam ! Clean residual mean=0.000093 rms=0.003394 Jy/beam ! Combined flux in latest and established models = 0.536753 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.536753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114890Jy sigma=2.133998 ! Fit after self-cal, rms=0.113965Jy sigma=2.118206 ! Inverting map ! Added new window around map position (-2.2, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312577 Jy ! Component: 100 - total flux cleaned = 0.0545392 Jy ! Total flux subtracted in 100 components = 0.0545392 Jy ! Clean residual min=-0.013128 max=0.018167 Jy/beam ! Clean residual mean=0.000074 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.591292 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.591292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098176Jy sigma=1.818725 ! Fit after self-cal, rms=0.097968Jy sigma=1.815196 ! Inverting map ! Added new window around map position (-0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207578 Jy ! Component: 100 - total flux cleaned = 0.0374695 Jy ! Total flux subtracted in 100 components = 0.0374695 Jy ! Clean residual min=-0.011239 max=0.014514 Jy/beam ! Clean residual mean=0.000059 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.628761 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.628761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089067Jy sigma=1.646892 ! Fit after self-cal, rms=0.088919Jy sigma=1.644591 ! Inverting map ! Added new window around map position (-4.4, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158375 Jy ! Component: 100 - total flux cleaned = 0.0288504 Jy ! Total flux subtracted in 100 components = 0.0288504 Jy ! Clean residual min=-0.009692 max=0.012429 Jy/beam ! Clean residual mean=0.000049 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.657612 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.657612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083146Jy sigma=1.532852 ! Fit after self-cal, rms=0.083043Jy sigma=1.531525 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.163 mas, bmaj=1.253 mas, bpa=-33.96 degrees ! Estimated noise=0.202274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198651 Jy ! Component: 100 - total flux cleaned = 0.0351893 Jy ! Component: 150 - total flux cleaned = 0.0474911 Jy ! Component: 200 - total flux cleaned = 0.0574848 Jy ! Total flux subtracted in 200 components = 0.0574848 Jy ! Clean residual min=-0.008874 max=0.011466 Jy/beam ! Clean residual mean=0.000038 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.715097 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 72 components and 0.715097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075307Jy sigma=1.385638 ! Fit after self-cal, rms=0.075041Jy sigma=1.380989 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.163 x 1.253 at -33.96 degrees (North through East) ! Clean map min=-0.0082222 max=0.50478 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.92 KP 1.04 ! LA 1.02 MK 1.05 NL 0.96 OV 0.93 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.92 KP 1.03 ! LA 1.00 MK 1.06 NL 0.98 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.94 KP 1.03 ! LA 1.00 MK 1.05 NL 0.97 OV 0.93 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.93 KP 1.04 ! LA 1.00 MK 1.07 NL 0.96 OV 0.94 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.95 KP 1.03 ! LA 1.00 MK 1.05 NL 0.96 OV 0.94 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.93 KP 1.04 ! LA 1.01 MK 1.06 NL 0.96 OV 0.95 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.94 KP 1.04 ! LA 1.00 MK 1.05 NL 0.97 OV 0.94 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.94 KP 1.04 ! LA 1.01 MK 1.05 NL 0.97 OV 0.95 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 0.93 KP 1.03 ! LA 1.00 MK 1.06 NL 0.96 OV 0.95 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 0.94 KP 1.03 ! LA 1.01 MK 1.07 NL 0.96 OV 0.94 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 0.94 KP 1.05 ! LA 1.00 MK 1.01 NL 0.96 OV 0.94 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.92 KP 1.05 ! LA 1.01 MK 1.00 NL 0.97 OV 0.93 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.075041Jy sigma=1.380989 ! Fit after self-cal, rms=0.060886Jy sigma=1.121262 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.169 mas, bmaj=1.259 mas, bpa=-33.09 degrees ! Estimated noise=0.200198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781864 Jy ! Component: 100 - total flux cleaned = 0.0112944 Jy ! Component: 150 - total flux cleaned = 0.0140389 Jy ! Component: 200 - total flux cleaned = 0.015693 Jy ! Total flux subtracted in 200 components = 0.015693 Jy ! Clean residual min=-0.002893 max=0.003446 Jy/beam ! Clean residual mean=0.000010 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.73079 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.73079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059094Jy sigma=1.087141 ! Fit after self-cal, rms=0.059006Jy sigma=1.085093 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059006Jy sigma=1.085093 ! Fit after self-cal, rms=0.058577Jy sigma=1.073797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.17 mas, bmaj=1.255 mas, bpa=-33.43 degrees ! Estimated noise=0.200381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352784 Jy ! Component: 100 - total flux cleaned = 0.00539645 Jy ! Component: 150 - total flux cleaned = 0.00676442 Jy ! Component: 200 - total flux cleaned = 0.00754239 Jy ! Total flux subtracted in 200 components = 0.00754239 Jy ! Clean residual min=-0.002609 max=0.002619 Jy/beam ! Clean residual mean=-0.000007 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.738332 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.738333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058140Jy sigma=1.066279 ! Fit after self-cal, rms=0.058122Jy sigma=1.065954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.4, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021073 Jy ! Component: 100 - total flux cleaned = 0.00250338 Jy ! Component: 150 - total flux cleaned = 0.00271819 Jy ! Component: 200 - total flux cleaned = 0.00292078 Jy ! Total flux subtracted in 200 components = 0.00292078 Jy ! Clean residual min=-0.002376 max=0.002217 Jy/beam ! Clean residual mean=-0.000008 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.741253 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.741253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057907Jy sigma=1.062327 ! Fit after self-cal, rms=0.057898Jy sigma=1.062198 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057898Jy sigma=1.062198 ! Fit after self-cal, rms=0.057850Jy sigma=1.061226 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.169 mas, bmaj=1.255 mas, bpa=-33.33 degrees ! Estimated noise=0.200673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186682 Jy ! Component: 100 - total flux cleaned = 0.00278789 Jy ! Component: 150 - total flux cleaned = 0.00323594 Jy ! Component: 200 - total flux cleaned = 0.00359483 Jy ! Total flux subtracted in 200 components = 0.00359483 Jy ! Clean residual min=-0.002107 max=0.002039 Jy/beam ! Clean residual mean=-0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.744848 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 0.744848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057681Jy sigma=1.058370 ! Fit after self-cal, rms=0.057674Jy sigma=1.058268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571645 Jy ! Component: 100 - total flux cleaned = 0.000845747 Jy ! Component: 150 - total flux cleaned = 0.00110456 Jy ! Component: 200 - total flux cleaned = 0.00130135 Jy ! Total flux subtracted in 200 components = 0.00130135 Jy ! Clean residual min=-0.001976 max=0.001928 Jy/beam ! Clean residual mean=-0.000007 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.74615 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 126 components and 0.74615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057580Jy sigma=1.056649 ! Fit after self-cal, rms=0.057577Jy sigma=1.056605 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057577Jy sigma=1.056605 ! Fit after self-cal, rms=0.057564Jy sigma=1.056101 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=2.308 mas, bpa=-68.39 degrees ! Estimated noise=0.251503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155223 Jy ! Component: 100 - total flux cleaned = 0.00240699 Jy ! Component: 150 - total flux cleaned = 0.00288156 Jy ! Component: 200 - total flux cleaned = 0.00306761 Jy ! Total flux subtracted in 200 components = 0.00306761 Jy ! Clean residual min=-0.001925 max=0.002167 Jy/beam ! Clean residual mean=-0.000012 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.749217 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 0.749217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057496Jy sigma=1.055051 ! Fit after self-cal, rms=0.057495Jy sigma=1.055001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273136 Jy ! Component: 100 - total flux cleaned = 0.000302957 Jy ! Component: 150 - total flux cleaned = 0.000357326 Jy ! Component: 200 - total flux cleaned = 0.000429162 Jy ! Total flux subtracted in 200 components = 0.000429162 Jy ! Clean residual min=-0.001956 max=0.002044 Jy/beam ! Clean residual mean=-0.000012 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.749646 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 0.749646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057476Jy sigma=1.054757 ! Fit after self-cal, rms=0.057475Jy sigma=1.054730 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.168 mas, bmaj=1.255 mas, bpa=-33.42 degrees ! Estimated noise=0.200892 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.168 x 1.255 at -33.42 degrees (North through East) ! Clean map min=-0.0019113 max=0.50011 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057475Jy sigma=1.054730 ! Fit after self-cal, rms=0.054120Jy sigma=0.980940 ! Inverting map and beam ! Estimated beam: bmin=1.167 mas, bmaj=1.255 mas, bpa=-33.69 degrees ! Estimated noise=0.201093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024502 Jy ! Component: 100 - total flux cleaned = 6.78407e-05 Jy ! Component: 150 - total flux cleaned = 0.000249351 Jy ! Component: 200 - total flux cleaned = 0.000502939 Jy ! Total flux subtracted in 200 components = 0.000502939 Jy ! Clean residual min=-0.001578 max=0.001772 Jy/beam ! Clean residual mean=-0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.750149 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.750149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054022Jy sigma=0.979184 ! Fit after self-cal, rms=0.054019Jy sigma=0.979117 ! Inverting map ! Added new window around map position (-10.2, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166089 Jy ! Component: 100 - total flux cleaned = 0.00210722 Jy ! Component: 150 - total flux cleaned = 0.002346 Jy ! Component: 200 - total flux cleaned = 0.00249521 Jy ! Total flux subtracted in 200 components = 0.00249521 Jy ! Clean residual min=-0.001451 max=0.001616 Jy/beam ! Clean residual mean=-0.000005 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.752645 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 0.752644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053938Jy sigma=0.977713 ! Fit after self-cal, rms=0.053935Jy sigma=0.977669 ! Inverting map ! Added new window around map position (13.8, 20.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145042 Jy ! Component: 100 - total flux cleaned = 0.00210649 Jy ! Component: 150 - total flux cleaned = 0.00246756 Jy ! Component: 200 - total flux cleaned = 0.0027015 Jy ! Total flux subtracted in 200 components = 0.0027015 Jy ! Clean residual min=-0.001476 max=0.001496 Jy/beam ! Clean residual mean=-0.000004 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.755346 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 0.755346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053865Jy sigma=0.976513 ! Fit after self-cal, rms=0.053863Jy sigma=0.976461 ! Inverting map ! Added new window around map position (7.4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101151 Jy ! Component: 100 - total flux cleaned = 0.00154346 Jy ! Component: 150 - total flux cleaned = 0.00189945 Jy ! Component: 200 - total flux cleaned = 0.00208284 Jy ! Total flux subtracted in 200 components = 0.00208284 Jy ! Clean residual min=-0.001446 max=0.001383 Jy/beam ! Clean residual mean=-0.000003 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.757429 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 181 components and 0.757429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053810Jy sigma=0.975559 ! Fit after self-cal, rms=0.053809Jy sigma=0.975536 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053809Jy sigma=0.975536 ! Fit after self-cal, rms=0.053804Jy sigma=0.975222 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=0.9715 mas, bpa=-47.44 degrees ! Estimated noise=0.4274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370042 Jy ! Component: 100 - total flux cleaned = 0.458262 Jy ! Component: 150 - total flux cleaned = 0.505685 Jy ! Component: 200 - total flux cleaned = 0.541312 Jy ! Total flux subtracted in 200 components = 0.541312 Jy ! Clean residual min=-0.011621 max=0.021100 Jy/beam ! Clean residual mean=0.000077 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.541312 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.541312 Jy ! Inverting map and beam ! Estimated beam: bmin=1.166 mas, bmaj=1.255 mas, bpa=-33.85 degrees ! Estimated noise=0.201211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442394 Jy ! Component: 100 - total flux cleaned = 0.0768783 Jy ! Component: 150 - total flux cleaned = 0.102513 Jy ! Component: 200 - total flux cleaned = 0.12286 Jy ! Total flux subtracted in 200 components = 0.12286 Jy ! Clean residual min=-0.005951 max=0.012076 Jy/beam ! Clean residual mean=0.000044 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.664172 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 0.664172 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163379 Jy ! Component: 100 - total flux cleaned = 0.0295519 Jy ! Component: 150 - total flux cleaned = 0.040288 Jy ! Component: 200 - total flux cleaned = 0.0490442 Jy ! Total flux subtracted in 200 components = 0.0490442 Jy ! Clean residual min=-0.003308 max=0.005738 Jy/beam ! Clean residual mean=0.000016 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.713216 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 78 components and 0.713216 Jy ! Inverting map ! Added new window around map position (-3.2, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726294 Jy ! Component: 100 - total flux cleaned = 0.0132084 Jy ! Component: 150 - total flux cleaned = 0.0181251 Jy ! Component: 200 - total flux cleaned = 0.0222889 Jy ! Total flux subtracted in 200 components = 0.0222889 Jy ! Clean residual min=-0.002338 max=0.003043 Jy/beam ! Clean residual mean=0.000004 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.735505 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.735505 Jy ! Inverting map ! Added new window around map position (-6.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368154 Jy ! Component: 100 - total flux cleaned = 0.00678978 Jy ! Component: 150 - total flux cleaned = 0.00948827 Jy ! Component: 200 - total flux cleaned = 0.0118752 Jy ! Total flux subtracted in 200 components = 0.0118752 Jy ! Clean residual min=-0.001897 max=0.001710 Jy/beam ! Clean residual mean=0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.74738 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 0.74738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=2.307 mas, bpa=-67.48 degrees ! Estimated noise=0.252181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321747 Jy ! Component: 100 - total flux cleaned = 0.005218 Jy ! Component: 150 - total flux cleaned = 0.00675106 Jy ! Component: 200 - total flux cleaned = 0.00798473 Jy ! Total flux subtracted in 200 components = 0.00798473 Jy ! Clean residual min=-0.001826 max=0.002087 Jy/beam ! Clean residual mean=-0.000006 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.755365 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018743 Jy ! Component: 100 - total flux cleaned = 0.00289494 Jy ! Component: 150 - total flux cleaned = 0.00352423 Jy ! Component: 200 - total flux cleaned = 0.00413479 Jy ! Total flux subtracted in 200 components = 0.00413479 Jy ! Clean residual min=-0.001609 max=0.001418 Jy/beam ! Clean residual mean=-0.000005 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.759499 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 199 components and 0.759499 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.166 mas, bmaj=1.255 mas, bpa=-33.85 degrees ! Estimated noise=0.201211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083558 Jy ! Component: 100 - total flux cleaned = 0.00138886 Jy ! Component: 150 - total flux cleaned = 0.00171269 Jy ! Component: 200 - total flux cleaned = 0.00210268 Jy ! Total flux subtracted in 200 components = 0.00210268 Jy ! Clean residual min=-0.001437 max=0.001356 Jy/beam ! Clean residual mean=-0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.761602 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 222 components and 0.761602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053811Jy sigma=0.975277 ! Fit after self-cal, rms=0.053787Jy sigma=0.974833 wmodel J1549+5038_X_map.mod ! Writing 222 model components to file: J1549+5038_X_map.mod wobs J1549+5038_X_uvs.fits ! Writing UV FITS file: J1549+5038_X_uvs.fits wwins J1549+5038_X_map.win ! wwins: Wrote 12 windows to J1549+5038_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293157 Jy ! Component: 100 - total flux cleaned = -0.000293499 Jy ! Component: 150 - total flux cleaned = -0.000361783 Jy ! Component: 200 - total flux cleaned = -0.000493453 Jy ! Component: 250 - total flux cleaned = -0.000640802 Jy ! Component: 300 - total flux cleaned = -0.000783066 Jy ! Component: 350 - total flux cleaned = -0.000960989 Jy ! Component: 400 - total flux cleaned = -0.00111532 Jy ! Component: 450 - total flux cleaned = -0.00119102 Jy ! Component: 500 - total flux cleaned = -0.00130237 Jy ! Component: 550 - total flux cleaned = -0.00137503 Jy ! Component: 600 - total flux cleaned = -0.00144642 Jy ! Component: 650 - total flux cleaned = -0.00149934 Jy ! Component: 700 - total flux cleaned = -0.00155121 Jy ! Component: 750 - total flux cleaned = -0.00156804 Jy ! Component: 800 - total flux cleaned = -0.00161767 Jy ! Component: 850 - total flux cleaned = -0.00158521 Jy ! Component: 900 - total flux cleaned = -0.00155307 Jy ! Component: 950 - total flux cleaned = -0.00161647 Jy ! Component: 1000 - total flux cleaned = -0.00155321 Jy ! Component: 1050 - total flux cleaned = -0.00161549 Jy ! Component: 1100 - total flux cleaned = -0.0015695 Jy ! Component: 1150 - total flux cleaned = -0.0015548 Jy ! Component: 1200 - total flux cleaned = -0.00159996 Jy ! Component: 1250 - total flux cleaned = -0.00164393 Jy ! Component: 1300 - total flux cleaned = -0.00158559 Jy ! Component: 1350 - total flux cleaned = -0.0016002 Jy ! Component: 1400 - total flux cleaned = -0.00155741 Jy ! Component: 1450 - total flux cleaned = -0.00157152 Jy ! Component: 1500 - total flux cleaned = -0.00157153 Jy ! Component: 1550 - total flux cleaned = -0.00158505 Jy ! Component: 1600 - total flux cleaned = -0.00150313 Jy ! Component: 1650 - total flux cleaned = -0.00152983 Jy ! Component: 1700 - total flux cleaned = -0.00144961 Jy ! Component: 1750 - total flux cleaned = -0.0015024 Jy ! Component: 1800 - total flux cleaned = -0.00146317 Jy ! Component: 1850 - total flux cleaned = -0.00146334 Jy ! Component: 1900 - total flux cleaned = -0.0014507 Jy ! Component: 1950 - total flux cleaned = -0.0014635 Jy ! Component: 2000 - total flux cleaned = -0.00146348 Jy ! Component: 2050 - total flux cleaned = -0.00145099 Jy ! Component: 2100 - total flux cleaned = -0.00142641 Jy ! Component: 2150 - total flux cleaned = -0.00145099 Jy ! Component: 2200 - total flux cleaned = -0.00146316 Jy ! Component: 2250 - total flux cleaned = -0.00148716 Jy ! Component: 2300 - total flux cleaned = -0.00146343 Jy ! Component: 2350 - total flux cleaned = -0.00146349 Jy ! Component: 2400 - total flux cleaned = -0.00146334 Jy ! Component: 2450 - total flux cleaned = -0.00144001 Jy ! Component: 2500 - total flux cleaned = -0.00146303 Jy ! Component: 2550 - total flux cleaned = -0.00147434 Jy ! Component: 2600 - total flux cleaned = -0.00149696 Jy ! Component: 2650 - total flux cleaned = -0.0014969 Jy ! Component: 2700 - total flux cleaned = -0.00146344 Jy ! Component: 2750 - total flux cleaned = -0.00148567 Jy ! Component: 2800 - total flux cleaned = -0.00148594 Jy ! Component: 2850 - total flux cleaned = -0.0015624 Jy ! Component: 2900 - total flux cleaned = -0.00158402 Jy ! Component: 2950 - total flux cleaned = -0.00161627 Jy ! Component: 3000 - total flux cleaned = -0.00160556 Jy ! Component: 3050 - total flux cleaned = -0.00161603 Jy ! Component: 3100 - total flux cleaned = -0.00161605 Jy ! Component: 3150 - total flux cleaned = -0.00164739 Jy ! Component: 3200 - total flux cleaned = -0.00159553 Jy ! Component: 3250 - total flux cleaned = -0.00160601 Jy ! Component: 3300 - total flux cleaned = -0.00160599 Jy ! Component: 3350 - total flux cleaned = -0.00157555 Jy ! Component: 3400 - total flux cleaned = -0.00160577 Jy ! Component: 3450 - total flux cleaned = -0.00157566 Jy ! Component: 3500 - total flux cleaned = -0.00158563 Jy ! Component: 3550 - total flux cleaned = -0.00157573 Jy ! Component: 3600 - total flux cleaned = -0.00152659 Jy ! Component: 3650 - total flux cleaned = -0.00151707 Jy ! Component: 3700 - total flux cleaned = -0.00156544 Jy ! Component: 3750 - total flux cleaned = -0.00151714 Jy ! Component: 3800 - total flux cleaned = -0.00150745 Jy ! Component: 3850 - total flux cleaned = -0.00146946 Jy ! Component: 3900 - total flux cleaned = -0.00145999 Jy ! Component: 3950 - total flux cleaned = -0.00145992 Jy ! Component: 4000 - total flux cleaned = -0.00141328 Jy ! Component: 4050 - total flux cleaned = -0.00145034 Jy ! Total flux subtracted in 4096 components = -0.00140417 Jy ! Clean residual min=-0.000578 max=0.000577 Jy/beam ! Clean residual mean=-0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.760198 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 546 components and 0.760198 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1549+5038_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.166 x 1.255 at -33.85 degrees (North through East) ! Clean map min=-0.00098633 max=0.49999 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1549+5038_X_map.fits wmodel /vlbi/uf001/uva//J1549+5038_X_map.mod ! Writing 546 model components to file: /vlbi/uf001/uva//J1549+5038_X_map.mod wobs /vlbi/uf001/uva//J1549+5038_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1549+5038_X_uvs.fits wwins /vlbi/uf001/uva//J1549+5038_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J1549+5038_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.499994 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156118 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.093672 0.093672 0.187344 0.374688 0.749376 1.49875 2.99751 5.99501 11.99 23.98 47.9601 95.9202 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.499 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3202.66 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1549+5038_X_dfm.log closed on Mon Jan 14 03:28:26 2019